Weber Werkzeugmaschinen GbR

Condition: like new (used), Deckel FP2 Tool Milling Machine Condition: as new (used), overhauled by FPS Technical Data: Spindle Head: Spindle head movement automatic / manual: 190 / 200 mm Movement of bearing sleeve by hand: 100 mm Work Table: Clamping surface: 700 x 330 mm Longitudinal movement automatic / manual: 390 / 400 mm Vertical movement automatic / manual: 390 / 400 mm Feed Gear: Number of feeds: 18 Feed range geometrically stepped: 8 - 400 mm/min Rapid traverse: 1200 mm/min Horizontal Milling Spindle: Number of spindle speeds: 18 Speed range geometrically stepped: 40 - 2000 rpm Internal taper: SK 40 Drive Motor: Itslhjwrr Spjccqneh Power: 2.2 kW Motor speed: 1420 rpm Fpebmml Iowa Dfqjw Noh Dimensions and Weight: Width: 1100 mm Depth: 1450 mm Height: 1650 mm Weight, approx.: 1000 kg Equipment: - 3-axis digital display Heidenhain - Coolant system - Machine lamp - Emergency stop push button - Extensive accessory package

Condition: used, Year of construction: 2015, Technical Data: Engine speed: 740 rpm Power: 5.5 kW Drum speed: 750 rpm Drum diameter: 600 mm Itslhccqewprtnjnsh Usable drum volume: 90 dm³ Weight, approx.: 550 kg

Condition: like new (used), Year of construction: 2021, Technical data: Speed: 800 rpm Power: 5.5 kW g-value: 391 Filling capacity G: 200 kg Islowprqtehccqnjth Filling capacity V: 120 dm³ Weight, approx.: 1700 kg

Condition: used, Year of construction: 2019, Technical data: Pressure: 1.5 / 0.15 bar / MPs Flow rate: 4500 l/h Working diameter: 600 mm Usable height: 310 mm Housing/frame: stainless steel Heating power: 4.5 kW Max. temperature: 80°C Adjustable cleaning time: 1 - 30 min Load capacity: 130 kg Connected load: 5.5 kW Tank capacity: 100 l Dimensions (DxWxH), approx.: 1080 x 1000 x 1250 mm Weight, approx.: 165 kg Equipment: Itjlhewpq Absccqnjh - Fully automatic part cleaning - Motor-driven turntable - 3-dimensional nozzle system - Operating hours counter - Retaining ring (stainless steel for turntable) - 2 lockable swivel castors - Timer for cleaning cycle - Water level control

Condition: used, - Power consumption: 26 kVA 3P400V /N/PE/50HZ; protection 63A - Compressed air connection: min. 5 bar, max. 7 bar Itelhccqswpkc Ijneh - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa, min. 20 m/s, follow-up time 15s The system has been cleaned, packed by the manufacturer, preserved, and stored. It is complete and ready for operation. The system can be inspected at any time by appointment.

Condition: used, Year of construction: 1998, Spindle hours: 3,500 h Technical specifications: Turning length: 245 mm Face diameter: 120 mm Spindle bore: 42 mm Speed: 6,000 rpm Röhm chuck: ø 125 mm Power: 5.5 kW Floor space required, approx.: 2,000 x 2,000 x 2,200 mm Weight, approx.: 1,400 kg Equipment: - Siemens 810 D control system - Autoturn - Dialog and G-code programming - 12-station turret - 6-station driven VDI 16 Ielhcowlhqnjcqnjth - Internal tool measurement - Documentation - Toolsetter is being retested

Condition: used, Year of construction: 2003, Machine hours: 1,594 h Technical specifications: Swing over bed: 320 mm Swing over face: 150 mm Clamping width, approx.: 800 mm Lathe chuck: 200 mm Lathe spindle size: 6 Spindle mount: MT 6 Speed range: 14 - 3,550 rpm Cross travel: 185 mm Spindle bore: 52 mm Quill: 70 mm Quill mount: MT 5 Quill stroke: 120 mm Max. torque: 32 Nm Gear ratios: 2 Drive power: 7 kW Iolhewlhn Hjccqneth Multifix tool carrier: size B Dimensions (L x W), approx.: 2,600 x 1,440 x 1,800 mm Weight, approx.: 1,500 kg Control system: SINUMERIK 810DE-L CCU0 (Cycles for taper turning and thread machining

Condition: used, Year of construction: 2016, Technical Specifications: Main Spindle: Max. Bar Capacity: 20 mm Draw Tube Bore: 24 mm Max. Speed: 10,000 rpm Counter Spindle: Draw Tube Bore: 26 mm Max. Speed: 10,000 rpm X1 Axis: Travel: 50 mm Max. Speed: 32 m/min Y1 Axis: Travel: 325 mm Max. Speed: 32 m/min Z1 Axis: Itelhccowiwmtjqnjh Travel (with rotary spindle): 60 (180) mm Max. Speed: 32 m/min X2 Axis: Travel: 220 mm Max. Speed: 32 m/min Z2 Axis: Travel: 170 mm Max. Speed: 32 m/min Slide 1: Number of fixed tools for internal machining: 9 Toolholder diameter: 20 mm Number of fixed tools for external machining: 6 Number of driven tools: 4 Max. speed of driven tools (GEO 7-9): 6,000 rpm Max. speed of driven tools (GEO 8-10): 3,450 rpm Slide 2: Number of fixed tools for internal machining: 4 Toolholder diameter: 20 mm Max. speed of driven tools Tools: See slide 1 Total power: 12 kVA Dimensions, approx.: 1992 x 1223 x 1821 mm Weight, approx.: 2200 kg Equipment: - Fanuc 32i-B control system - Number of axes: 5 - Conversion kit from short- to long-bore lathe, C-axis for GGSP and rear motorization - Emulsion kit - 12 bar cooling pump - Conveyor belt - 400 V to 200 V transformer - Collet set - IEMCA SMART 320/32 EVO bar loader - Collet for IEMCA Smart 320

Condition: new, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Itelhcewhd Afscqnsh Spindle: MT 3 Thrust: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm X travel: 380 mm Y travel: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread tightening spindle - Thread cutting device - Rotatable table - Height-adjustable protective cover - Spindle guard with limit switch

Condition: used, Year of construction: 2004, Technical Specifications: Travel X/Y/Z: 650 / 500 / 450 mm Clamping Area: 1000 x 600 mm Spindle Mount: SK 40 Spindle Speed: 6500 rpm Max. Table Load: 400 kg Number of Tool Magazine Positions: 20 Power: 24 kVA Machine Weight, Approx.: 5500 kg Equipment: - Motorized Spindle 12000 rpm Itolowglapshccqnsh - 20-Station Tool Changer - Heidenhain Tool Probe - Heidenhain Workpiece Probe - Heidenhain Handwheel - Menzel Minimum Quantity Lubrication - Approx. 25 Tool Holders

Condition: used, Year of construction: 2008, Technical specifications: Max. robot reach: 2800 mm Payload at 2800 mm: 60 kg Nominal payload: 130 kg Cabin with: - Rolling door control unit - Turntable Ijlhcswgk I Ejcqnsth - Steel counterweight plate Including Düring welding gun

Condition: used, Year of construction: 2005, Technical specifications: Travel paths X/Y/Z: 420 / 300 / 400 mm Working container X/Y/Z: 650 / 500 / 340 mm Working table load capacity: 500 kg Itolhccqewgkmheneh Maximum dielectric height (programmable / automatic): 300 mm Working table support surface W x D: 550 x 470 mm Head load: 100 kg

Condition: used, Year of construction: 2018, Technical specifications: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50 Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Wash tank: 900 l Rinse tank: 900 l Oil separator: 200 l Iolhccswf U Rueqnsth

Condition: used, Year of construction: 1998, Technical specifications: Maximum cutting width: 205 mm Maximum cutting height: 310 mm Belt speed: 12 - 2460 m/min Motor power: 0.8 - 1.2 kW Dimensions (W x D x H), approx.: 720 x 800 x 1960 mm Weight, approx. 420 kg Equipment: - 14 saw blades - Emergency stop button The machine does not have a belt welding device. Itjlhswfqiysccqnoh

Condition: used, Year of construction: 2014, Technical specifications: Islhccqjv Ukx Ijnjth Magnification: 10x Diameter: 315 mm Max. workpiece height: 103.5 mm X/Y travel: 150 / 50 mm Table size: 280 x 152 mm Effective working area of measuring table: 1840 x 82 mm Power supply: 230 V Machine weight, approx.: 116 kg Accessories: - Precision vise - Carrying handles

Condition: used, Year of construction: 2005, Operating hours 40100 h Spindle hours 18355 h Technical Data: X/Y/Z - Travel: 630 / 537 / 540 mm, approx. 50 mm above table in Z Rotary table speed: F 14000 / approx. 30 1/min Spindle speed: 18,000 1/min Iolhcjv Tn Ikecqnsth Table size: 1000 x 600 mm Rotary table size: ø 600 mm Rotary axis resolution: 0.001° IKZ: yes Feed and rapid traverse speed: 10,000 / 30,000 mm/min Spindle motor power: 18 - 25 kW Total connected load: 58 KVA, 100 A fuse Equipment: - Spindle SK40 - Heidenhain Mill Plus IT control - Tool changer slots 24 / "bread drawer" - Swivel head and rotary table

Condition: used, HSK - Motor-driven guillotine shear: - Motor: Dietz 380-3-50, 2.2 kW - Stroke rate: 100 rpm - Weight: approx. 700 kg Itolhcov Tm Hlscqnoh - Driven by brake motor - Cut initiated by a movable foot switch - Shear table with support table extended to approx. 600 mm - Side stop TA 500 with scale - Folding rear width stop ZA 500 - Manually adjustable. The stop can be raised for long sheets. - Fully installed and ready for use Additional: Pneumatic hold-down device

Condition: used, Year of construction: 2021, Operating hours: 5 hours Itjlhccev Tmp Tjqnoh Technical specifications: Max. bending capacity: 9 mm Max. pre-bending capacity: 7 mm Cylinder diameter: 775 mm Material with yield strength: 260 N/mm² Roller diameter: 155 mm Max. sheet width: 1500 mm Dimensions (LxWxH), approx.: 3200 x 1500 x 1200 mm Weight, approx.: 2500 kg

Condition: used, Year of construction: 1999, Technical specifications: X-axis travel range: 2500 mm with repositioning: 5000 mm Y-axis travel range: 1550 mm Z-axis travel range: 300 mm Max. table load weight: 330 kg X/Y axis speed: 80 / 80 m/min Simultaneous axis speed: 113 m/min Laser power: 2000 W Max. sheet thickness: 12 / 6 mm Width, approx.: 2300 mm Islhcov Sbdvocqnsth Height, approx.: 1600 mm Weight, approx.: 6800 kg

Condition: used, Year of construction: 2006, Akon Robotics ASK 602 welding cell Itjlhcsv Rburscqnjh Equipment: - EWM Hightec Welding Phönix RC 2 welding source - Kuka KR 6 ARC welding robot, built in 2004 - 2 welding stations as a rotating device

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head Itolhccjv N Uyrjqnoh - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: reconditioned (used), Year of construction: 1970, Heidenreich & Harbeck Hamburg 840 Condition: Used Year of construction: 1970, geometrically overhauled in 2023 Itelhccqsv N T Smjnsh Technical specifications: Swing diameter over bed: 840 mm Swing diameter over cross slide: 520 mm Center distance: 1500 mm Center height: 420 mm Motor power: 11 kW Bed width: 600 mm Spindle bore: 127 mm Longitudinal feeds: 0.08 - 2.8 mm/rev Cross feeds: 0.04 - 1.4 mm/rev Quill stroke: 300 mm Spindle speed: 7.1 - 1400 rpm Weight, approx.: 6500 kg Dimensions, approx.: 4000 x 2200 x 1800 mm Equipment: - Forkardt 3-jaw lathe chuck, D = 400 mm - 3-axis digital readout - Quadruple tool post Scope of partial overhaul: - Machine partially disassembled and repainted - Guideways ground on both sides (Z-axis, Z-axis, and X-axis) - Tailstock sleeve hard-chromed and ground (inside/outside) - New stainless steel back plate

Condition: used, Jaw width: 125 mm Opening width: 150 mm Iolhov Hcyzjccqnsth The vice does not have a pipe clamp.

Condition: like new (used), Milwaukee inspection camera M12 ICAV3 with battery and charging station Islhccjv Hbq Ssqneth

Condition: used, Technical data: Speed: 2900 rpm Disc dimensions: 175 / 25 / 51 mm Motor power: 0.25 kW Dimensions (WxDxH), approx.: 370 x 220 x 235 mm Iolhjv Eadnsccqnoth