Internal and surface grinding machine

Buderus CNC 235 IA-T-L

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 9469, Functionality: fully functional, TECHNICAL DETAILS Largest workpiece diameter:  150 mm Max. Workpiece diameter:  250 mm Maximum workpiece length:  350 mm Largest swivelling diameter above the table:  310 mm Height of the workpiece spindle above the floor:  1150 mm Workpiece spindle speeds:  0 - 3000 rpm (NC-programmable) Control:  Siemens SINUMERIK 840D SL Z-axes:  885 mm X-axes:  300 mm Rapid traverse Z-Achsen:  0 - 60 m / min Rapid traverse X-Achsen:  0 - 30 m / min Bhwtt2emn2l Infeed speed infinitely variable:  0.01 - 15 mm / min Infeed depending on the stroke:  0.0005 - 0.1 mm Workpiece spindle positioning:  C-axis MACHINE DETAILS Connected load of the machine:  approx. 45 kW Weight:  16500 kg Fixed pick-up date of the machine on 27.12.23 or 09.01.24. Bidder is obliged to pick-up the machine on time.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 9467, Functionality: fully functional, TECHNICAL DETAILS Max. Workpiece diameter:  250 mm Maximum workpiece length:  150 mm Largest swivelling diameter above the table:  310 mm Height of the workpiece spindle above the floor:  1150 mm Rey890i Workpiece spindle speeds:  0 - 3000 rpm (NC-programmable) Control:  Siemens SINUMERIK 840D Z-axes:  885 mm X-axes:  300 mm Rapid traverse Z-Achsen:  0 - 60 m / min Rapid traverse X-Achsen:  0 - 30 m / min Infeed speed infinitely variable:  0.01 - 15 mm / min Infeed depending on the stroke:  0.0005 - 0.1 mm Workpiece spindle positioning:  C-axis MACHINE DETAILS Connected load of the machine:  approx. 45 kW Weight:  7500 kg Fixed pick-up date of the machine on 19.12.23 or 02.01.24. Bidder is obliged to pick-up the machine on time.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 9473, Functionality: fully functional, TECHNICAL DETAILS Largest workpiece diameter:  150 mm Max. Workpiece diameter:  280 mm Largest swivelling diameter above the table:  200 mm Height of the workpiece spindle above the floor:  1250 mm Workpiece spindle speeds:  NC-programmable Control:  Siemens SINUMERIK 840D Z-Axis 1: 600 mm Z-Axis 2: 400 mm Z-Axis 3: 400 mm X-Axis 1: 280 mm X-Axis 2: 280 mm X-Axis 3: 280 mm Rapid traverse Z-Achsen:  0 - 30 m / min Rapid traverse X-Achsen:  0 - 30 m / min Infeed speed infinitely variable:  0.01 - 15 mm / min Infeed depending on the stroke:  0.0005 - 0.1 mm Workpiece spindle positioning:  C-axis MACHINE DETAILS Connected load of the machine:  approx. 50 kW Weight:  9000 kg Bhwtr3rvqsw Fixed pick-up date of the machine on 27.12.23 or 09.01.24. Bidder is obliged to pick-up the machine on time.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 10041, Functionality: fully functional, TECHNICAL DETAILS Largest workpiece diameter:  150 mm Max. Workpiece diameter:  250 mm Maximum workpiece length:  350 mm Largest swivelling diameter above the table:  310 mm Height of the workpiece spindle above the floor:  1150 mm Workpiece spindle speeds:  0 - 3000 rpm (NC-programmable) Control:  Siemens SINUMERIK 840D Bg3eklddljs Z-axes:  885 mm X-axes:  300 mm Rapid traverse Z-Achsen:  0 - 60 m / min Rapid traverse X-Achsen:  0 - 30 m / min Infeed speed infinitely variable:  0.01 - 15 mm / min Infeed depending on the stroke:  0.0005 - 0.1 mm Workpiece spindle positioning:  C-axis MACHINE DETAILS Connected load of the machine:  approx. 45 kW Weight:  7500 kg Fixed pick-up date of the machine on 05.12.23 or 19.12.23. Bidder is obliged to pick-up the machine on time.

Condition: used, Year of construction: 2002, machine/vehicle number: 8831, total power requirement:45 kW weight of the machine ca.:7,5 t workpiece length - max.:150 mm max. workpiece diameter:150 mm Fujc0jmhz max. swing diameter over bed:320 mm height of workpiece spindle over floor:1150 mm work piece spindle speed:0-6000 U/min 4 x identical machines available Hard turning/ grinding machine

turning length: 600 mm, turning diameter: 440 mm, spindle speed (max.): 3,500 rpm, spindle bore: 53 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 675 mm, Condition: excellent (used), Year of construction: 2016, Operating hours: 4,800 h, Functionality: fully functional, Double-spindle CNC lathe Hyundai Wia L 250SY with Y-axis and VDI 40 turret Year of manufacture: 08/2016 Control system: Fanuc 31i Running hours: 4,800h Technical data: Wia L 250Y Main spindle speed: 3,500min-1 Drive power: 22/18 KW Spindle bore: 95mm Chuck: 250mm Counter spindle speed: 6,000min-1 Drive power: 7.5/5 KW Spindle bore: 53mm Chuck counter spindle: 160mm Turning diameter: max. 440mm Turning length: Travel axes: X-axis: 230mm Y-axis: +/- 55mm Z1 axis: 675mm Z2 axis: 700mm Turret: 8skn0j20wi Number of stations: 12 Mounting: VDI 40 Speed: 4.000min-1 accessories: - Chip conveyor - Tool measuring arm - Interface loading magazine - Parts collecting tray left + right - Approx. 5-6 tool holders included An IRCO Simag 100 bar feeder suitable for the machine is available as an option.

Condition: ready for operation (used), Year of construction: 2000, MECOF DYNAMILL 2000/L gate year 2000 X 4000 Y 3000 Z 1500 HEADER 5 AXES - 15 KW- 12000 rpm - HSK 63-A CNC FIDIA M 20/MQG 14' color graphics machine in operation at customer site Ek9rj2i8l

Condition: new, Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine With the purchase of the T-variation of High-Z cnc-router you get a proven technology. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-engraving-machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. Zjhpdyxl A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 2000 steps/rev (1/10 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Ball bearings at both sides of ball screws on X and Y axis •Traverse speed of rapid feed: max. 7000 mm/min •Technical resolution : 0,00625 mm ( 1/8 Schritt ) •Reversal error max.: +/- 10µm ( 0,01mm ) •Table size / clamping area: 730 x 400 mm •Traverse Paths: X=400 mm; Y=280 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 730 x 520 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) •incl. Software ConstruCAM-3D limited ( recommended sell price 1902.81 EUR) •Modular frame for universal application •Weight appr. 31 kg •Complete machine Included 5 driver microstep controller 5 x 3,5 Amps (Zero3) •An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. •An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 4 x 3,5 Amper

Condition: new, Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. All cnc-routers / cnc-milling-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: • Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) • 2 motors for constant tension and compression during milling operation on X-Axis • Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface • Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle • Ball bearings at both sides of ball screws on X and Y axis • Traverse speed of rapid feed: max. 7000 mm/min • Technical resolution : 0,00625 mm ( 1/8 Schritt ) • Reversal error max.: +/- 10µm ( 0,01mm ) • Table size / clamping area: 1300 x 700 mm • Traverse Paths: X=1000 mm; Y=580 mm; Z= 110 mm • Reference- and limit switch on all axes • Double safety emergency stop button • Energy chain for clean cabling • Total dinemsions incl motors: L x W x H = appr. 1320 x 840 x 500mm • Milling Motor anchorage: Euroneck Ø43mm • incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) • incl. Software ConstruCAM-3D limited( recommended sell price full version 1902.81 EUR) • Modular frame for universal application • Weight appr. 51 kg • Complete machine Included 5 driver microstep controller 5 x 3,5 Ampere (Zero3) • An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. • An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Zjhraz2n Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 4 x 3,5 Ampere • Microstep controller Resolution 1/10-Step / 2000 Steps/Rev. • 4 Connections for 4 brushless Motor / Stepper motor • Connection with parallel port and Software WIN

Condition: new, Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. A CE compliant commissioning of the CNC machine requires the assembly of the safety enclosure and the suction adapter. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. All cnc-milling-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-engraving-machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. Zjkxcgey Basic equipment of all High-Z CNC-milling machines: Limited Software ConstruCAM-3D ( from S-720 and S-400/T ) included !! Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Ball bearings at both sides of ball screws on X and Y axis •Traverse speed of rapid feed: max. 7000 mm/min •Technical resolution : 0,00625 mm ( 1/8 Schritt ) •Reversal error max.: +/- 10µm ( 0,01mm ) •Table size / clamping area: 1050 x 520 mm •Traverse Paths: X=720 mm; Y=400 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 1070 x 690 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software ConstruCAM-3D •Modular frame for universal application •Weight appr. 41 kg •Complete machine Includet 5 driver microstep controller 5x 3,5 Ampere (Zero3) •An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. •An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC milling machine: - 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology - Main voltage 115 - 240 Volt / 47 - 63 Hz. - Motor current 4 x 3,5 Ampere - Microstep controller Resolution 1/10-Step / 2000 Steps/Rev. - 4 Connections for 4 brushless Motor / Stepper motor - Connection with parallel port and Soft

Condition: new, Why manufacture small parts on large, expensive CNC machining centers when it does a small CNC machine for a fraction of the price as fast and true to size ? Vgv9a7cnn A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. Brass, copper , steel, stainless steel and many other materials can be processed . See information and seek non-binding offer or view a demonstration at our premises , personalized with your material and your record !

Condition: new, Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling ..... With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. This 3D-milling-machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-engraving-machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. A CE compliant commissioning of the CNC machine requires the assembly of the safety enclosure and the suction adapter. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Ball bearings at both sides of ball screws on X and Y axis •Traverse speed of rapid feed: max. 7000 mm/min •Technical resolution : 0,00625 mm ( 1/8 Schritt ) •Reversal error max.: +/- 10µm ( 0,01mm ) •Table size / clamping area: 730 x 400 mm •Traverse Paths: X=400 mm; Y=280 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 730 x 520 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software ConstruCAM-3D limited •Modular frame for universal application •Weight appr. 31 kg •Complete machine Included 5 driver microstep controller 5 x 3,5 Ampere (Zero3) •An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. •An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 4 x 3,5 Ampere • Microstep controller Resolution 1/10-Step / 2000 Steps/Rev. Imvh9aw • 4 Connections for 4 brushless Motor / Stepper motor • Connection with parallel port and Software WIN PCNC Light, Economy or

Condition: new, Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router Zjhqcjjm With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. This cnc-machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. All cnc-milling-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-engraving-machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Ball bearings at both sides of ball screws on X and Y axis •Traverse speed of rapid feed: max. 7000 mm/min •Technical resolution : 0,00625 mm ( 1/8 Schritt ) •Reversal error max.: +/- 10µm ( 0,01mm ) •Table size / clamping area: 1050 x 520 mm •Traverse Paths: X=720 mm; Y=400 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 1070 x 690 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) •incl. Software ConstruCAM-3D limited ( recommended sell price full version 1902.81 EUR) •Modular frame for universal application •Weight appr. 41 kg •Complete machine Includet 5 driver microstep controller 5 x 3,5 Ampere (Zero3) •An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. •An approx. 2-3 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 5-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 5 x 3,5 Ampere • Microstep controller Resolution 1/10-Step / 2000 Steps/Rev. • 4 Connections for 4 brushless Motor / Stepper motor • Connection with par

Condition: new, Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. Zjhr9kno This 3D-cnc-milling machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. With the S-1400 cnc-routers you are able to mill in almost all materials. Additional linear rail ways from HIWIN at X-axis are making the machine extreme stable. With the two trapezium nuts at X and y axis you are able to adjust backlash too. High quality components and a optional underframe leave none wishes open. So you are able to do that too: Milling in a big metall sheet cabinet. Work further like a professional and arrange a demonstration today in our house. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Guide ways X 22mm and Y axle 30 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Additional linear guide rails 15mm from HIWIN for the X Axis •Ball bearings at both sides of ball screws on X and Y axis •Traverse speed of rapid feed: max. 7000 mm/min •Technical resolution : 0,0079375 mm ( 1/8 Schritt ) •Reversal error max.: +/- 10µm ( 0,01mm ) •Table size / clamping area: 1730 x 880 mm •Traverse Paths: X=1400 mm; Y=780 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 1750 x 1040 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) •incl. Software ConstruCAM-3D limited ( recommended sell price full version 1902.81 EUR) •Modular frame for universal application ( shown underframe optional, 980 Euro incl VAT ) •Weight app

Condition: good (used), Year of construction: 2012, S&T ST-40/55 VC Vertical Turning & Milling 2012 Gr7zdjso Fanuc 31i CNC Table diameter 4000 mm Turning diameter 5500 mm Turning height 2600 mm Table drive motor 60/75 KW Table speeds 60 rpm C-Axis 0.001° Milling spindle motor 22/26 KW Milling spindle speeds 1500 rpm 16 station tool changer Proposal Number V(K)-6833

Condition: ready for operation (used), Year of construction: 2017, The PVSLN1 lathe is a self-loading machine that uses the clamping system to pick up the workpiece itself and move it to the machining room. The machine is equipped with a vertical workpiece spindle. The workpiece spindle is driven by a highly dynamic CNC main spindle motor. Manufacturer Pittler T&S GmbH Machine type PV SL N1 / 2-2 Year of manufacture 2017 Main spindle drive - 2 x 42 KW = 84 KW at 100 % ED - 4500 rpm max. speed - 140 Nm torque ( at the spindle) - turning spindle flange ø185 mm for chuck according to DIN 6353 - workpiece clamping hydraulically operated by Röhm OVS 85 with stroke monitoring cross slide left and right Cvxi27xpne - face travel (X-direction) approx. 1200 mm - longitudinal travel (Z-direction) approx. 320 mm - feed force (X-axis) 4 KN - Feed force (Z-axis) 6 KN - Slide speed (X-axis) 0-40 000 mm/min - Slide speed (Z-axis) 0-30 000 mm/min Tool carrier left and right - SAUTER 8-fold - Tool system CAPTO C4 Hydr. equipment Fa. Rexroth Tank capacity approx. 60 litres - Transport weight of the machine approx. 15 000 kg - Weight of total machine system approx. 17 500 kg - Maximum machine height approx. 3 300 mm Control - Siemens 840D_SL

Condition: new, Year of construction: 2023, Why choose CORMAK press brake? - European production press, made with all machine directives. - Machine with EC Declaration - The production used components from world-renowned manufacturers such as Bosch Rexroth pumps, Schneider Electric electrics, servo motors control, Cybelec or Delem control - Heavy and stable construction for precision work Laser safety system in standard. - Laser protection operator" hands: FIESSLER - The system works only during fast ram run-out. - Enables the lowest switchover points between the access speed and working speed over the material. - Does not require special sequences of pressing foot brake. - Enables quick tool change (automatic positioning of transmitter and receiver after changing tools to a different length type) - Doesn't need to stop in box mode - It does not increase the cycle time when bending in box mode compared to other protections - It enable bending material with an uneven surface (e.g. corrugated, uneven, dirty sheet) by changing the speed to slow at any point of rapid movement. EASY TO USING (INTUITIVE) CYBTOUCH 12PS CONTROL - Large touchscreen, with vivid colors and high-contrast. - TouchProfile function for manual drawing - Simple pages, clear display, large keys. - Intuitive and user-friendly interface - Complete programming for efficient mass-production with multiple bends. - Easy single bends thanks to the EasyBend page - Online help and interactive warning pop-up. - Comfortable wireless software updating and data back-up using PC or Notebook. - USB port for memory sticks. - Large selection of languages available - 4 axes control (Y1-Y2-X-R). - TouchProfile 2D graphic part creation with manual sequencing. - Bend allowance calculation. - Pressure – crowning calculation. - Each part or bend can have its specific tools. - Punch depth calculation. - Angle and back gauge correction. - Delivered with PC-ModEva offline software. Technical parameters Max. bending lenght 3100 mm Pressure 135 ton Stroke 270 mm Open height 550 mm Throat depts 450 mm Distance between columns 2550 mm Table width 120 mm Table height 850 mm Dxqacq Motor power 15 kW Oil tank 200 l Dimensions 4200 x 2150 x 2760 mm Weight 8700 kg For more information please visit our web page and contact us

Condition: excellent (used), Year of construction: 1999, incl. loading magazine Iemca Mini Boss 325/32 5-axis CNC sliding headstock automatic lathe CNC control Mitsubishi M 6 turning diameter 20 mm turning length 200 mm spindle bore 24 mm driven tools driving power 3,7 kw incl. very extensive tooling. The machine has been released due to an age-related liquidation and is in an excellent mechanical and mechanical and well maintained condition. Qb0q9 The machine was only operated in single-shift operation. All manuals and documentation available. The machine will be sold exclusively in a package with the two Citizen B 12-II/VI incl. stock magazines Genus 112/32 sold.

Condition: new, With the T-Rex N-0609 portal milling machines you buy mature technology and long-proven technology combined in one portal machine Machine with CNC control, CADCAM software, control software, control panel, manual central lubrication, multi-zone vacuum table. Due to the robust steel frame construction, vibrations can be damped during the machining process. Thus, the machined workpiece gets clean cutting edges and surfaces. The CNC portal milling machine with helical racks and HWIN / THK / PMI linear slides has a solid cast steel frame. The portal milling machine enjoys great popularity with its robust construction and high stability. Due to the compact base, the machine is ready for use directly at waist height, eliminating the cost of a base as an additional purchased element. Iteunet Further advantages of the T-Rex portal milling machine Compared to the CNC milling machine from the High-Z T series, the T-Rex portal milling machine has a 100mm greater clearance height between the grooved plate and the Z axis. In this case, the plate material can also be a little thicker in order to still fit under the bridge. This means that you are buying a machine that is unparalleled in its price class, with outstanding precision combined with high stability, maximum ease of operation and an attractive appearance. Travel X-axis 900 mm Y-axis travel 600 mm Z-axis travel 200 mm Passage height 200 mm (optional 300/400mm) Clamping surface X / Y on grooved plate 930 x 630 mm length x width x height 165 x 144 x 195 cm Weight 650 kg backlash +/- 0,015 Repeatability ± 10 ?m feed speed 17.000 mm/min Working speed max. 12.000 mm/min

Condition: new, Year of construction: 2017, Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank Technical data of the shelf trolley: Manufacturer: LPR Type: 600 Cayrsibk 01x shelf trolley, new material colour: blue / orange total height incl. castors: 2.150 mm total width: 1.550 mm total depth: 600 mm Number of levels: 03 pcs. Consisting of each: 02x shelf stands, new material colour: blue Frame profile dimension: 50 x 50 mm incl. cross and diagonal braces, Metal footplates, plastic Cover caps The stands are pre-assembled (bolted truss) 2,000 mm high 600 mm deep 06x workbench cross beams, new material colour: orange Execution: Step traverse clear width: 1.450 mm profile dim.: 80 x 50 mm Shelf load 300 kg with uniformly distributed load 12x locking pins, new To protect the longitudinal beams against accidental lifting out 03 x inlay shelves, II. choice used Thickness: 22 mm Dimensions: 1.430 x 545 mm 02x double stop swivel castors new Roll dim.: 125 x 37mm mounting plate: 105 x 80mm Galvanized steel rim with hub and thread guard 02x castors, new Roll dim.: 125 x 37mm mounting plate: 105 x 80mm Galvanized steel rim with hub and thread guard 08x machine screws: M8 x 20 mm 08x nuts: M8 08x washers: The pictures serve to clarify the material. The material colour may vary if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time in the R

Condition: new, GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. Wo8xsr The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. The CAM software works off your data accurately and in a very short time and created excellent photos in all above mentioned materials with the CNC machine and the GranitoGrav photo module. The operating costs are extremely low here: Diamond-grinding bits cost about 3-4 euro per piece and stand about 3-5 large images in granite. A photo with the size of 300 x 230 mm requires a processing time of 40-50 minutes approximately. Pictures of 15 x 10 cm are already in about 12-15 minutes. Software runs on all Windows systems! The innovation for all stone, natural stone companies, stone processing, tombstones, monument design, etc. Ideal for tombstones and memorials, as well as glass engravings in finest quality. Also, you can create reliefs in marble, etc. with the mobile CNC machine in-depth, from fonts and even 3D bas reliefs ! Here will find quite a few videos to GranitoGrav applications in glass, granite, bottles, glasses, etc.! Duplicate link, enter in the browser window and open. YouTube.com/user/Croftmania Operating principle of GranitoGrav: In the the spindle recording of grinding head with a brushless motor driven each Scheifstift 2, 35 mm shank can be used. Dragging edit the photo or the graphics. All grayscale in the photo is taken into account and regulated the pressure of the grinding tool via a special electronic system and the software so that lighter and darker areas are generated in the material to be processed, which ultimately represent a photo. Also, vector graphics, fonts, etc. can be engraved. We keep ready a font package with Gothic, Greek and Russian fonts (total 230 fonts) for you! This can be even different completed and engraved in different shades of gray. Pantograf Pantograph Pantografo Pantografi Pantographe pietra nero assoluto fresadora fresatrice fraiseuse Jyrsintae μηχάνημα άλεσμα fraisage machin Freesmachine Frēzēšanas mašīna frezavimo mašinos Фрезерный станок Frezarka Freza Fraesmaskin Frézovací stroj Frézka Фреза

Condition: new, GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excellent photos in all above mentioned materials with the CNC machine and the GranitoGrav photo module. Co7t9fcj The operating costs are extremely low here: Diamond-grinding bits cost about 3-4 euro per piece and stand about 3-5 large images in granite. A photo with the size of 300 x 230 mm requires a processing time of 40-50 minutes approximately. Pictures of 15 x 10 cm are already in about 12-15 minutes. Software runs on all Windows systems! The innovation for all stone, natural stone companies, stone processing, tombstones, monument design, etc. Ideal for tombstones and memorials, as well as glass engravings in finest quality. Also, you can create reliefs in marble, etc. with the mobile CNC machine in-depth, from fonts and even 3D bas reliefs ! Here will find quite a few videos to GranitoGrav applications in glass, granite, bottles, glasses, etc.! Duplicate link, enter in the browser window and open. YouTube.com/user/Croftmania Operating principle of GranitoGrav: In the the spindle recording of grinding head with a brushless motor driven each Scheifstift 2, 35 mm shank can be used. Dragging edit the photo or the graphics. All grayscale in the photo is taken into account and regulated the pressure of the grinding tool via a special electronic system and the software so that lighter and darker areas are generated in the material to be processed, which ultimately represent a photo. A CE compliant commissioning of the CNC machine requires the assembly of the safety enclosure and the suction adapter. Also, vector graphics, fonts, etc. can be engraved. We keep ready a font package with Gothic, Greek and Russian fonts (total 230 fonts) for you! This can be even different completed and engraved in different shades of gray. Pantograf Pantograph Pantografo Pantografi Pantographe pietra nero assoluto fresadora fresatrice fraiseuse Jyrsintae μηχάνημα άλεσμα fraisage machin Freesmachine Frēzēšanas mašīna frezavimo mašinos Фрезерный станок Frezarka Freza Fraesmaskin Frézovací stroj Frézka Фреза

Condition: new, With the servo motor milling machine T-Rex Servo-0609 you buy mature technology and long-proven technique combined with trend-setting servo motor technology. Machine with control panel incl. control system, multi-zone vacuum table, manual central lubrication, CADCAM software, control software Machine dimensions 1650 x 1440 x 2050 mm traversing range 900 x 600 x 200 mm clamping area 930 x 630 mm Passage height Z 220 mm (optional 320 / 420 mm) Lyk2j Weight approx. 700 kg Backlash approx. 0.02 to 0.03 mm Repeat accuracy approx. 0.01 mm Rapid speed diagonal max. 50,000 mm per min. Working speed diagonal max. 35.000 mm per min Drive type Servo motors Yaskawa 400 Watt Linear guides width 20 mm (optional 25 mm) The servo motor CNC milling machine T-Rex Servo-0609 with helical racks and HWIN / THK / PMI linear slides has a solid steel frame. The portal milling machine enjoys great popularity with its robust construction, high stability and extensive basic equipment. Due to the robust steel frame construction, vibrations can be damped during the machining process. Thus, the machined workpiece receives clean cutting edges and surfaces. Further advantages of the servo motor milling machine T-Rex Due to the installed servo motors, high efficiency is brought into the production. Besides, there is a high time-saving in clamping, machining and maintenance. A 200mm high clearance between the vacuum table and the Z-axis also makes it easy to machine taller panel materials, as they fit under the bridge without effort. Versatile applications T-Rex Servo-0609 servo motor milling machine is not only suitable for precise milling work but can also be used for drilling, cutting or engraving. Massive components and the high quality of processing of mechanical components allow the production of workpieces from various materials! Due to the built-in helical racks, the T-Rex servo-mills achieve fantastic accuracy and immense speed and are also very flexible in special sizes and can also be manufactured to customer specifications. CE-compliant commissioning of our CNC milling machines requires the installation of a protective enclosure and exhaust port.

Condition: new, The portal milling machine T-Rex for 2D, 2.5D and 3D material processing, milling optimized. With 2500 x 1300 mm travel, 200 mm in the Z direction. The scope of delivery also includes the comprehensive CAD-CAM software ConstruCAM-3D. Optional features include high-frequency milling motors, multi-zone vacuum table, safety enclosures, minimum spray cooling, multiple tool change systems with HSK holders, as well as direct change systems and other useful accessories. Machine weight 1550 kg Machine dimensions 3270 x 2150 x 1950 mm clamping area 2530 x 1320 mm Traverse areas (X,Y,Z) 2500 x 1300 mm Passage height 220 mm (optional 320/420 mm) Ruq0c9w Idle speed (rapid traverse X,Y) 17,000 mm/min Working speed 12.000 mm/min Backlash approx. 0.015 mm Repeat accuracy 0.01 mm The robust steel frame construction can damp vibrations during the machining process. Thus, the machined workpiece receives clean cutting edges and surfaces. The CNC portal milling machines from the T-Rex series are equipped with high-quality helical racks on each axis and HIWIN linear guides. The drive stepper motors are designed for milling in aluminium, brass, wood, plastic and many other materials. CE-compliant commissioning of our CNC machines requires the attachment of the protective enclosure and the exhaust port.

Condition: new, The servo CNC milling machine T-Rex Servo-1325 with helical racks and HWIN / THK / PMI linear slide has a solid steel frame. The portal milling machine enjoys great popularity with its robust construction, high stability and extensive basic equipment. Datdyqaqc Machine including CNC control, CADCAM software, control software, control panel, manual central lubrication, multi-zone vacuum table. traverse area 2500x1300x200 mm clamping area 2530x1320 mm passage height Z max. 220 mm (optional 320/420 mm) Machine dimensions 3270x2150x2100 mm machine weight 1600 kg max. rapid traverse diagonal 50.000 mm per min. max. working speed diagonal 35.000 mm per min. drive: Yaskawa 750 Watt servo motors ( optional available with 850 Watt) A 200 mm clearance height between the vacuum table and the Z-axis also makes it easy to process higher panel materials, as they fit under the bridge without difficulty. Solid components and the high quality of workmanship of the mechanical components allow the production of workpieces from various materials! With the built-in helical racks, the T-Rex servo-mills achieve fantastic accuracy and immense speed, and are also very flexible when it comes to special sizes, and can also be made to customer specifications. CE-compliant commissioning of our CNC milling machines requires the installation of a protective enclosure and exhaust port.

Condition: like new (used), Year of construction: 1995, Operating hours: 20,933 h, machine/vehicle number: 1737, Manufacturer: OFFICINA MECCANICA PREALPINA S.R.L Type/Model: T.60 L/D 35 with vent Year: 1995 Serial no: 1737 Motor : 45 KW AC Condition: in good working condition Hours :20933 Screw diameter: 60 mm, recently refurbished Capacity of 80÷110 kg/h Pelletizing line suitable for the recycling of grinded rigid plastic materials PE, PP, PC, PS,ABS, ABS/PC, PA Line composition: - Single extruder - rigid materials dosing unit - die head-spaghetti - filter Cresta Ø 80 mm - hydraulic screenchanger semi-automat without interrupting the extrusion - degassing pump - cooling water bath Cyomy3rr2z - Electrical equipment of control and command with cooling - Sheer pelletizing unit SGS 100

Condition: used, Year of construction: 1986, CNC Circular Seam Welding Machine Make CLOOS Type CD 500/SR/4LB/IA/B make # 10005, wiring diagram # 86516 year of construction 1986 Technical data: Center height 450 mm turntable diameter 600 m center width 1500 mm dimensions L x W x H approx. 3000 x 1000 x 1300 mm Jssprditxj used, in good condition

Condition: excellent (used), Year of construction: 1997, Roland 304 L+V+T Cqlguhsuri 123-mio. Perfector 2/2, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Cooling Refrigerator, Auto-Wash, Roland Mabeg Jet Feeder, Steel Plate on Overlap, Steel Plate on the Lining, Non-Stop Device, Super Blue, Bacher Registry System Quick Bars, Powder Sprayer, High Pile Delivery, Capacity: 15000 Sheets/h, Paper Thickness: 0,04-0,6mm, Max Paper Size: 53x74cm, Min Paper Size: 26x40cm, Start of Print: 9.5-10.5mm, Plate Format: 605x745, Plate Thickness: Max 0,3mm, Standard Accessories)

Condition: defective spare-parts repository (used), Year of construction: 1990, spare parts CNC milling machine DECKEL FP5CC/T year 1990 spare parts How. Control DIALOG 11 Wewgut39 Switch cabinet Complete Milling spindle vertical and horizontal ISO 40 Universal rotary tilting table Tool magazine with changer Chip conveyors, motors, U.S.W. Please ask for request.

Condition: excellent (used), Year of construction: 2018, Control unit: Mazatrol Smooth C Max. circulation diameter: 696 mm Max. turning diameter: 340 mm X-axis movement: 215 mm Y-axis movement: 100 mm Z-axis movement: 605 mm Spindle speed range: 4000 1/min Main spindle motor (25%) 15/11 kw Bar work capacity main spindle 80 mm Spindle bore 91mm C-axis main spindle 0. 0001 degrees Y-axis Chip conveyor: Tailstock Tool turret 12 places Weight: 5350 kg Thlqz0rlm

Condition: used, Year of construction: 2001, Ref. -No.: 10144 Manufacturer: DECKEL Type: DMU 80 T-1 Year of construction: 2001 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 11130000713 X-Travel: 880 mm Y-Travel: 630 mm Z-Travel: 630 mm Machine length: 3600 mm Machine width: 2700 mm Machine Height: 2500 mm Table Dimensions (Lengthxwidth): 1250 x 700 mm Table Load: 1000 kg Max. Workpiece Weight: 8 kg Tool Taper: SK 40 Tool Piece Magazine With: 32 Pcs./pcs. Spindle Speed: 18.000 RPM Rapid Traverse: 30 m / min Total connected load max.: 37 kVA Weight Of The Machine Ca.: 9 t Operating hours: 42.340 H Bil7exdojjg Further information: Additional information: • Table: swivel milling head

Condition: like new (used), Year of construction: 2021, Operating hours: 465 h, Swing over bed 600mm, swing over carriage 400mm, bar capacity 51mm, machining diameter 300mm, machining length 510mm, 24 position turret, Fanuc series I control, Bilmyjnn3bh Spindle speed 6,000 rpm, milling speed 6,000rpm, Y axis +/ - 52.5mm, C axis 0.001 degrees, swarf conveyor, tool setter, parts catcher, fume extractor, tailstock.

turning length: 450 mm, turning diameter: 300 mm, Condition: excellent (used), Year of construction: 2009, Control OSP P20L-R Max. turning diameter 300 mm Max. Turning length 450 mm Spindle speed 3000 min-1 3-jaw chuck diameter 210 mm Bglig2s82cg 12-position turret with driven turret Chip conveyor

Condition: used, Year of construction: 1999, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) L0q3o2ghjf Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

mileage: 2,58,811 km, power: 155 kW (210.74 PS), year of first registration: 2,018, month of first registration: 3, overall weight: 7,490 kg, fuel type: diesel, color: white, axe configuration: 2 axles, year of inspection (TÜV): 2,024, month of inspection (TÜV): 2, gearing type: automatic, emission class: euro6, loading space volume: 6 m³, loading space width: 2,360 mm, loading space length: 5,000 mm, loading space height: 500 mm, Condition: used, Year of construction: 2018, machine/vehicle number: 3693, Equipment: ABS, Air conditioning, Electronic stability program (ESP), Soot filter,

Condition: good (used), We will only answer inquiries with your name and complete company name. Cisiunzop0 Machine is newly arrived. Data will follow shortly. Machine can be inspected under power at the Aachen location. Delivery at short notice by arrangement.

Condition: used, Year of construction: 2004, Ref. -No.: 10387 Manufacturer: MATEC Type: 30 L / 6000 Year of construction: 2004 Type of control: CNC D7s9knk Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 800 mm Z-Travel: 600 mm Spindle Taper: HSK 63 Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 15000 RPM Max. Torque: 165 Nm Main Drive: 60 kW Weight Of The Machine Ca.: 24 t

overall weight: 10,500 kg, axe configuration: 2 axles, maximum load weight: 6,720 kg, empty load weight: 3,780 kg, tire size: 245/70 r 17,5, fuel: biodiesel, wheelbase: 990 mm, suspension: air, loading space volume: 42 m³, loading space width: 2,480 mm, loading space length: 7,100 mm, loading space height: 2,420 mm, Condition: new, machine/vehicle number: 136163, Equipment: ABS, Tail-lift,

turning length: 1,020 mm, turning diameter: 540 mm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, input power: 22 kW (29.91 PS), Condition: good (used), Year of construction: 2008, 1 used turning and milling center Doosan type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter 540 mm Max. Turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm Dmy9zr B-axis: 240° Tool magazine / ATC Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted

Condition: new, Year of construction: 2016, Wide span shelving, new dimensions: L 2550 x H 2000 x D 800 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 800x2000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. safety pins 4x shelves 2430x745mm, thickness: 22 mm C3zshrgm

mileage: 2,58,811 km, power: 155 kW (210.74 PS), year of first registration: 2,018, month of first registration: 3, overall weight: 7,490 kg, fuel type: diesel, color: white, year of inspection (TÜV): 2,024, month of inspection (TÜV): 2, gearing type: automatic, emission class: euro6, loading space volume: 6 m³, loading space width: 2,360 mm, loading space length: 5,000 mm, loading space height: 500 mm, Condition: used, Year of construction: 2018, machine/vehicle number: 3693-1, Equipment: ABS, Air conditioning, Central locking, Electronic stability program (ESP), Soot filter,

Condition: used, Year of construction: 2004, Ref. -No.: 10386 Manufacturer: MATEC Type: 30 L / 5000 Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 5000 mm Y-Travel: 800 mm Z-Travel: 600 mm Spindle Taper: SK 50 Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 15000 RPM Max. Torque: 165 Nm Bil7qxr2bvh Weight Of The Machine Ca.: 22 t

Condition: new, Wide span shelving, new dimensions: L 2550 x H 3000 x D 600 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x3000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. safety pins 4x shelves 2440x549mm, Lvhkt thickness: 22 mm

mileage: 2,36,811 km, power: 130 kW (176.75 PS), year of first registration: 2,013, month of first registration: 11, overall weight: 7,490 kg, fuel type: diesel, color: silver, axe configuration: 2 axles, year of inspection (TÜV): 2,024, month of inspection (TÜV): 10, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space width: 2,490 mm, loading space length: 6,190 mm, loading space height: 2,600 mm, Condition: used, Year of construction: 2013, machine/vehicle number: 3580, Equipment: ABS, Soot filter, Tail-lift,

Condition: new, Wide span shelving, new dimensions: L 2050 x H 2000 x D 800 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 800x2000mm unassembled, incl. cross and diagonal braces, Ui979fwfu plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x745 mm, thickness: 22 mm

mileage: 3,38,650 km, power: 175 kW (237.93 PS), year of first registration: 2,018, month of first registration: 10, overall weight: 16,000 kg, fuel type: diesel, color: blue, axe configuration: 2 axles, year of inspection (TÜV): 2,024, month of inspection (TÜV): 10, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space width: 2,460 mm, loading space length: 7,280 mm, loading space height: 2,250 mm, Condition: used, Year of construction: 2018, machine/vehicle number: 3701, Equipment: ABS, Air conditioning, Parking heater, Soot filter, Tail-lift,

Condition: new, Year of construction: 2016, - Basic shelf - wide span shelving, new dimensions: L 2050 x H 2500 x D 600 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load C3nuyqfe #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x2500mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x545mm, thickness: 22 mm

mileage: 3,38,650 km, power: 175 kW (237.93 PS), year of first registration: 2,018, month of first registration: 10, overall weight: 16,000 kg, fuel type: diesel, color: blue, axe configuration: 2 axles, year of inspection (TÜV): 2,024, month of inspection (TÜV): 10, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space width: 2,460 mm, loading space length: 7,280 mm, loading space height: 2,250 mm, Condition: used, Year of construction: 2018, machine/vehicle number: 3701-1, Equipment: ABS, Air conditioning, Parking heater, Soot filter, Tail-lift,

Condition: new, Year of construction: 2016, Wide span shelving, new dimensions: L 2050 x H 2000 x D 600 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: I3cuskb 2x shelf uprights, 600x2000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x545mm, thickness: 22 mm

mileage: 2,36,811 km, power: 130 kW (176.75 PS), year of first registration: 2,013, month of first registration: 11, overall weight: 7,490 kg, fuel type: diesel, color: silver, year of inspection (TÜV): 2,024, month of inspection (TÜV): 10, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space width: 2,490 mm, loading space length: 6,190 mm, loading space height: 2,600 mm, Condition: used, Year of construction: 2013, machine/vehicle number: 3580-1, Equipment: ABS, Soot filter, Tail-lift,