Radial Drilling Machine

Kolb NKR 41

Condition: good (used), Year of construction: 2007, Functionality: fully functional, PS 41 single-chamber cleaning system for cleaning solder frames or solder carriers B0Bd7Leh

Year of construction: 1983, Condition: good (used), KOLB Radial drilling machine NKR 42 machine no.: 10073 spindle diameter 70 mm spindle stroke 325 mm throat 1250 mm rpm max 1700 clamping table 2500x4500 mm,10 T-slots Dimensions LxWxH 25000x4500x29000 mm weight approx. 10 to 3Pp0Tf72 accessories: Steel cabinet with clamping tools Machine vice

Condition: good (used), KOLB radial drilling machine NKR 43 Oijbf spindle diameter 80 mm spindle stroke 325 mm Projection 1250 mm 5.5 KW rpm 50 - 2100 Angle bracket LxWxH 610x500x530 mm Dimensions LxWxH 2420x920x2850 mm Weight approx. 3,5 to

Year of construction: 1979, Condition: not inspected (used), Hahn & Kolb Variomatic 12 station indexing table automat -WKG 443- Offered here is an automatic indexing plate machine from the company Hahn&Kolb. Technical data: Manufacturer: Hahn&Kolb Type: Variomatic T 4-12 Year of manufacture: 1979 Table: Ø 630mm Units: 1x spindle unit, 1x slide unit, 8x quill units Chuck outer diameter: 135mm Max. Workpiece clamping width: 80mm 78Bi0Ao Max. Drilling capacity in steel: 16mm

Condition: used, Year of construction: 2011, Perfect Binding Line - consisting of: Gathering Machine ZU 841.B - hand feeding at the end of ZU - MECCANOTECNICA book block feeder XMT - 18 stations basic frame - 18 feeders with automatic section thickness control ATC and signature recognition system SignaLynx - card gluer KK 841 - reject unit AS 841 to the left - transfer channel as connection unit to the binder - extended jogging station - air center VariAir Perfect Binder KM 412.B - 30 clamps - infeed incl. coupling to a ZU gathering machine - main milling station with strip cutter and dust cutter Dphz2Z - 4 spine preparing units - 1st cold spine gluing unit - cold glue pump - IR heater for intermediate drying - Hotmelt spine gluing unit - premelter LH 375.C - changeable PUR spine gluing unit - Nordson smelting unit XNO 962 - Hotmelt side gluing unit - premelter LH 375.A - lining station - IR heating at curve - stream cover feeder SAL 413.B - scoring station for 6 scores - 2 pressing stations - straight delivery - lay down device to the left with shingled stream function Transport and Drying Line - incl. drying tower (9,25 windings) - with reject unit / emergency delivery High Capacity Three Knife Trimmer HD 153.P - right hand infeed with counter stacker - copilot with touch screen monitor - standard cutting tables (no. 7 - 18) - silicon-spraying device - 2 set of knives RIMA / KOLBUS Compensating Stacker XRS 130 - delivery to left and right with roller delivery 360° Service Portal AFS 701.W

Condition: used, Year of construction: 2011, Machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable B2W3Nov0Ga - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: good (used), Equipment gathering machine • 6 stations • gatherer Ferag • reject unit • 2 jogging elements perfect binder • perfect binder Publica KM 410 • copilot with touch screen • 40 clamps • infeed incl. coupling with ZU • 2 milling stations • strip milling head • 4 spine preparation stations • hotmelt spine gluing unit • 2nd hotmelt spine gluing unit • hotmelt side gluing unit • 3 premelters Bkga7Clfzsh • stream cover feeder SAL 411 • cover scoring 4 lines • 2 pressing stations • straight delivery • lay down device • quality control with individual product rejection conveyor system • length ca. 50 m • drying tower XAF • intermediate delivery • belt control cabinet TS.E three knife trimmer • three knife trimmer HD 152.P • right hand infeed with pre stacker • copilot with touch screen • cutting tables • knife adjustment device • 2 sets of knives compensating stacker • compensating stacker CB 16 • counting device • delivery right

Year of construction: 1976, Condition: used, Machine/vehicle number: WR2, Demag overhead crane Crane canopy Crane runway Indoor crane Crane Payload / lifting capacity 5t - 5000KG, track 13900mm Outer dimension with endcarriage approx. 14000mm Evxgp297V Rope hoist P-pull P412 M11 - 4 strand with fine lift Year of manufacture 1976 with floor control Overall height top edge of crane to hook approx. 1000mm Endcarriage length with buffer approx. 3000mm Lifting height rope hoist 5500mm Weight approx. 3200KG Control system overhauled, new contactors etc. installed, cable towing with towing chain added Crane is dismantled, available immediately from location 79664 Wehr. Inspection book is available Good used condition Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please ask for zip code Collection preferred

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, . - basic machine - 18 feeders 841.E - 6 stream feeders STA 840 - reject unit AS 481 E to the right - in-feed in KM 412.E (40 clamps) - spine preparation - 2 x hot-melt spine gluing - 1 x hot-melt side gluing - 2 x nipping station - lay down delivery - several conveyor belts with tower - three knife trimmer HD 153P - cutting cassettes - stacker XKL 500 Iffhtb7Eh - palletizer PL 771 - air center Becker - technical documentation

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Equipment: Documentation/Manual, Multiple clamp perfect binder with gatherer and three knife trimmer Equipment: GATHERING MACHINE - 6 stations - gatherer Ferag - reject unit - 2 jogging elements PERFECT BINDER - perfect binder Publica KM 410 - copilot with touch screen - 40 clamps - infeed incl. coupling with ZU - 2 milling stations - strip milling heag - 4 spine preparation stations - hotmelt spine gluing unit - 2nd hotmelt spine gluing unit - hotmelt side gluing unit Bkowuv7Iyin - 3 premelters - stream cover feeder SAL 411 - cover scoring 4 lines - 2 pressing stations - straight delivery - lay down device - quality control with individual product rejection CONVEYOR SYSTEM - weight ca. 50 m - drying tower XAF 660 - intermediate delivery - belt control cabinet TS.E THREE KNIFE TRIMMER - three knife trimmer HD 152.P - right hand infeed with pre stacker - copilot with touch screen - cutting tables - knife adjustment device - 2 sets of knives COMPENSATING STACKER - compensating stacker CB 16 - counting device delivery right

Condition: used, Year of construction: 2003, Perfect Binding Line - consisting of: Gathering Machine ZU 841.B - handfeeding one person - 21 stations with optical sheet control - 1 feeder for signatures with laps to be bound - 1 card gluer - set up element - reject unit AS 841 to the left - transfer to the binder - BECKER Air center VariAir (year 2005) Perfect Binder Publica KM 410.B - copilot system with touch screen - 20 clamps - main milling station - 3 spine preparing units - interchangeable Hotmelt spine gluing unit - Premelter Robatech ICS C160 - interchangeable PUR nozzle spine gluing unit EP 48V (year 2008) - Nordson PUR premelter spine gluing unit DuraDrum DK 200 (year 2008) - interchangeable Hotmelt side gluing unit 3 mm - Premelter Robatech ICS C 30 - non-stop stream cover feeder NA 400.B with feeding conveyor - scoring station 9Tbdchavux - 2 pressing stations - lay down device

Year of construction: 2003, Condition: used, Machine/vehicle number: 1054, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Cprpbxynzz Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated 04-09-2023

Year of construction: 2001, Condition: good (used), Built in: 2001-2003 Size: max 290 x 420 x 65 mm; min 100 x 105 x 3 mm Speed: max 15.000 c/h Equipment gathering machine Iqkxf2B • chain tensioner • 12 stations • gatherer ZU 840 • 8 streamfeeder STA 840 • reject unit AS 840 controls • opticontrol signature image reader intermediate elements • reject unit • jogging element perfect binder • Copilot • Monitor control • 23 clamps • jogging station • resting table • fold pressing station • milling and roughening station • equalizing-leveling station • hotmelt spine gluing unit • hotmelt side gluing unit • 2 premelters • stream cover feeder • cover pressing station • smooth lay down device conveyor system • bypass for splitting saw splitting saw • turnover belt • connected with three knife trimmer • destacker • information three knife trimmer: HD 151 P compensating stacker • information compensating stacker: Müller Martini CB 16 standard accessories • pv pressure-vacuum pump • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools further information • machine can be tested in production • condition: working condition

Year of construction: 2006, Condition: used, Card Gluing Unit: - with NORDSON premelter SERIES 3100 V Pfkal (For connection with KOLBUS Gathering Machine ZU 841.B)

Condition: used, Metric thread diameter (max.): 36 mm, Throat depth: 305 mm, Vertical precision tapping machine HÜLLER / Hahn & Kolb Type UG 36 serial number 628.0067 Rpclfs3Ta 1-spindle Technical data: largest thread to be drilled steel up to 60 kp/mm2 M 36 v 8-12 m/min M 100 x 2 Largest thread to be drilled Gray cast iron up to 220 HP M 36 v 8-12 m/min M 100 x 2 Smallest thread to be drilled M 5 smallest achievable pitch 0.25 mm Largest spindle stroke 100 mm Threads per minute max. 20 Drill chuck taper B 24 largest distance spindle nose - table 900 mm throat 305 mm Table size 360 x 500 mm Speed 180 / 250 / 350 rpm Quill stroke 90 mm Total power requirement 3 kW Machine weight approx. 750 kg External dimensions approx. L x W x H approx. 700 x 600 x 2200 mm With - tapping chuck M14-M30 - foot switch - change wheels used, in good condition

Condition: used, Year of construction: 2012, Ref. -No.: 10290 Manufacturer: KOLB KLUEPPELBERG Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Max. Workpiece Weight: 20 t X-Travel: 7000 mm Y-Travel: 4000 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Table-Size (Lxw): 2.800 x 2.000 mm Cbzlumteo Tool Taper: SK 50 Distance Between Columns: 3.200 x 4.000 mm Machine number: 016453-20.1 Further information: 4 Milling Heads available.

Year of construction: 2018, Condition: used, Spine Gluing Unit For Kolbus Perfect Binder KM 412.E Mzc03C

Condition: used, Machine/vehicle number: 7016, Table Ø: 320 mm Ivnbvgkeo Overall height: 103 mm Center hole: MK 4 Space requirement: 400 x 500 mm

Condition: good (used), Year of construction: 1995, Catalog No. : 7187 Type: Varimat VD 2000 Producer: KOLB Made in: 1995 Characteristic: Bi03Gdmdxq3 Operating system: SIEMENS Sinumerik 880 Axis X: 6000 mm Axis Y: 2400 mm Axis Z: 1100 mm Number of axes: 3 pcs Accuracy of positioning: 0 05/5 mt Weight: 83000 kg

Condition: good (used), Year of construction: 1980, Cylindrical grinding machine KOLB R8/7000 YOM ab. 1980 Main technical data: Centre height: 400 mm
 Table speeds:: 30 ¬ 4500 mm/min 
Grinding motor: 30 kW 
Swing diameter: 800 mm
 Grinding length: 7000 mm Workpiece drive: 3,3 kW
 Peripheral speed: 30 m/sec 
Rapid adjustment: 50 mm
 Workpiece weight: 6000 kg
 Grinding diameter: 800 mm
 Grinding wheel speeds: 720 & 900 U/min Tailstock quill stroke: 100 mm
 Cwo9Iy9K8G Total power requirement: 45 kW 
Workpiece turning speeds: 6 ¬ 60 U/min
 Weight of the machine ca.: 30 t
 For more information please contact us.

Condition: used, Year of construction: 1973, Polygon lathe HAHN & KOLB type TORNOMAT 2 Machine # 668273 Year of manufacture 1973 Technical data: Byfriv02 Working range hexagon 3 - 36 mm working range square 3 - 24 mm hydr. feed per revolution 0 - 0.5 mm Rapid traverse 3.7 m/min. Switching time 1.0 sec. Speed of the rotor 250 / 355 / 450 rpm. Speed of the high-speed drilling spindle 2250 / 3200 / 4050 rpm. Drive power 2.2 / 1.5 kW Weight approx. 1300 kg External dimensions approx. 1850 x 1000 x 1220 mm With - Electrical control cabinet 750 x 400 x 950 mm, 100 kg - Conveyor belt used, in good condition for the economical quantity and series production of six-edges on of high strength, of square edges on tool shafts as well as of parallel surfaces on tool shanks as well as parallel surfaces on machine parts.

Condition: used, BBC Current Converter Device (unprogrammed) (Kolbus-No. 00054416) Olbms70Q8

Condition: good (used), table mounting size: 400 x 1500 mm table movement x: 1130 mm table movement y: 320 mm table movement z: 430 mm spindle taper: ISA 50 spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm carriages longitudinal and cross: 15 - 600 mm/min carriages vertical: 6 - 240 mm/min space needed: 2500 x 2200 x 1900 mm weight: 3000 kg Bwprmyr2Ts

Condition: used, Year of construction: 1975, Grinding length: 110 mm, Distance between centers: 230 mm, Tool grinding machine HAHN & KOLB type WS 54 year of construction 1975 Technical data: large workpiece diameter 200 mm Bojf8Ipnmts max. clamping length between the centers 230 mm MK 5 mounting cone gr. sanding length 110 mm Cross infeed 140 mm Swivel of the workpiece spindle head +/- 7.5° Horizontal and vertical swivel of the angle head +/- 90° Rotational speed of the sanding spindle 4450 - 31000 rpm. Grinding wheel diameter 125 mm Motor power 0.55 kW Dimensions L x W x H 1400 x 1000 x 1500 mm Weight approx. 500 kg used, in good condition Current special price ex warehouse/location - free loading truck as available in stock

Year of construction: 2003, Condition: used, Spine Gluing Unit For Kolbus Perfect Binder KM 410.B Dl98Fv