Universal tool milling machine Kunzmann WF 9 CNC

Tool Room Milling Machine - Universal

Kunzmann WF 4 CNC

2003

excellent (used)

Call

Universal tool milling machine Kunzmann WF 4 CNC , year 2003 Heidenhain TNC 530 i 99utyzk XYZ : 400 x 350 x 400 mm speed 5000 1/min SK 40 Programmable coolant nozzles Bema

Listing

Bühl

6917 km

x-travel 650 mm y-travel 500 mm z-travel 450 mm table surface area 1000 x 600 mm spindle taper SK 40 spindle turning speed range 5 - 6500 U/min quill stroke 60 mm vertical head swivelling +/- 90 table load max. 400 kg feeds longditudinal/cross/vertical 0 - 4000 mm/min rapid traverse 25 / 25 / 20 m/min distance table / vertical spindle 100 / 550 mm distance table/horizontal spindle 270 / 720 mm no. of tools in magazin 20 tool diameter 95 mm wotkpiece diameter with 2 vacant positions 135 mm too...

Listing

Ubstadt-Weiher

6883 km

Kunzmann WF 7/3

2005

excellent (used)

€38,500

Call

Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 310 contouring control Super CONDITION CE conform !!! Technical data: >> Year of manufacture 2005 >> Milling table clamping surface 800 x 425 mm 3vdqlsk2mq Clamping grooves 6 slot width 14 H 7 groove distance 63 mm maximum load 300 kg >> Speeds up to 4500 min-1 >> Feed range up to 2000 mm/min. Rapid traverse up to 5000 mm/min. >> Travels X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydra...

Listing

Ahaus

7000 km

KUNZMANN WF 4/3 TNC 124

1996

used

Call

x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm ** New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool ...

Listing

Walzbachtal

6886 km

Kunzmann WF 7/3 TNC 310

1998

good (used)

€20,000

Universal tool milling machine

Call

Machine bought used and overhauled from Kunzmann in 2001, since then hardly run. Working range: longitudinal mm 600 / transverse mm 400 / vertical mm 400 main drive kW 5,5 speed range min-1 1 - 5000 tool holder ISO 40 feed range mm/min up to 2000 Huvxwvo rapid traverse mm/min 7500 Contouring control TNC 310 Weight approx. kg 2200 Year of manufacture 1998

Listing

Kirchheim unter Teck

6824 km

Kunzmann WF 650 - 840D

2007

not inspected (used)

€36,000

Call

Travel X: 650mm Travel Y: 500mm Ba9jvs0s travel distance Z: 450mm max. workpiece weight: 400kg

Listing

Malsch

6905 km

KUNZMANN WF 4

1999

used

Call

x-travel 400 mm y-travel 320 mm z-travel 400 mm Ftshluy9e Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Listing

Korschenbroich

(dealership location)

7029 km

Univ. NC tool milling machine

KUNZMANN WF 5

1989

used

Call

x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 handwheel tool taper SK 40 Cazzytvzbe weight of the machine ca. 1,7 t

Listing

Hessisch Lichtenau

6811 km

KUNZMANN WF 3/4

1998

used

€18,000

Call

Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 travel X: 400 mm Y: 320 mm Z: 400 mm table size 650 x 350 mm spindle admission SK 40 spindle speed 40 - 2500 rpm. feeds X, Y and Z-axis 0 - 1000 mm/min. infinitely variable rapid traverse X, Y- axis 4000 mm/min. rapid traverse Z-axis 3000 mm/min. Pinol adjustment vertical 60 mm 3o29j0q3wb Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle s...

Listing

Göppingen

6807 km

CNC Universal Tool Milling Machine

KUNZMANN WF 7 - TNC 355

used

Call

z-travel:380 mm y-travel:400 mm x-travel:500 mm tool taper:SK 40 vertical head swivelling:beidseitig 90 Grad table-size:LxB 700x425 mm dimensions of the machine ca.:2x2x2 m quill stroke:60 mm groove width:14H7 mm flute distance:63 mm E87wjon weight of the machine ca.:2 t total power requirement:10 kW Speed range of live tooling:5 - 3000 min -1 Loading:max. 250 kg clamping slots:6 power capacity - milling spindle:5,5 kW

Listing

Hamburg

6807 km

Kunzmann WF 7 / TNC 355

1990

ready for operation (used)

€4,750

Universal milling machine

Call

Immediately from disabled workshop free : CNC Universal Tool Milling Machine Kunzmann Type WF 7 / TNC 355 Year of manufacture 1990 only very few operating hours Heidenhain TNC 355 control table 700 x 425 mm Travel X / Y / Z 500 / 400 / 380 mm Yxpurw Milling head swivels 90 degrees on both sides table load 250 kg quill stroke 60 mm Drive 7,5 kw Mounting SK 40 Spindle speeds 40 - 3000 rpm Hydraulic vice Horizontal milling device Measuring probe Weight 2,5 to At the price of Euro 4...

Listing

Feucht

6695 km

Kunzmann WF 4/3 TNC 124

2008

reconditioned (used)

Call

Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of construction: 2008 - partly overhauled, new painted, RAL7035 light grey / RAL3027 raspberry red Machine no.: 344349 warranty: 6 months Geometric acceptance with test report accessories: - HEIDENHAIN TNC 124 linear control - Electronic handwheel HEIDENHAIN HR 410 - fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system DIN 69872 - Central lubrication, electric - Coolant device - chi...

Listing

Weiterstadt

6885 km

Milling machine

Kunzmann WF 7-3

1991

used

Call

Milling machine WF 7-3 Bvg2d3c7v2 Tool holder Sk 40 DIN 2080 Swivel tilting table Hydr. tool clamping

Listing

Ubstadt-Weiher

6883 km

Milling machine

Kunzmann WF 600M

2012

excellent (used)

Call

Tool milling machine Kunzmann WF 600M with Heidenhain TNC 124 control SUPER CONDITION CE conform !!! Technical data: >> Year of manufacture 2012 >> Milling table clamping surface 800 x 425 mm Clamping grooves 6 Sk7i9 slot width 14 H 7 groove distance 63 mm maximum load 300 kg >> Speeds S I 1 - 1125 min-1 speeds S II 1126 - 4500 min-1 >> feed (potentiometer 100 %) 0 - 2000 mm/min. Rapid traverse X and Y 5000 mm/min. rapid traverse Z 4000 mm/min. >> Travels ...

Listing

Waiblingen

6830 km

CNC universal milling machine

KUNZMANN WF 4/3

1996

good (used)

Call

Heidenhain control TNC 124 travel X/Y/Z = 400/320/400 mm speed 40-2500 rpm, spindle SK 40 DIN 2080 universal clamping table tiltable around 3 axes 650 x 395 mm Coolant device, machine light, add-on kit for electr. handwheel HR330, partly repainted. Tzh0er3

Listing

Berlin

(dealership location)

6574 km

Milling Machine

Kunzmann WF 600 MC

2015

ready for operation (used)

Call

X-travel: 610mm, y-travel: 450mm, z-travel: 400mm, rotational speed: 1-5000/min, clamping surface dimensions: 800x425mm, max. workpiece weight: 300kg. workpiece weight: 300kg, tool holder: SK 40, connected load: 15kVA, controls: Heidenhain TNC 620, weight: 2t, with ribbed cast construction in cross-slide design, flat guide, hardened longitudinally, transversely and vertically, recirculating ball screws in all axes, double-secured metal covers for recirculating ball screws and flat guide, distanc...

Listing

Reiden

6932 km

Kunzmann WF 4/3

2007

good (used)

Call

X-axis 400 mm Y-axis 350 mm Z-axis 400 mm spindle speed 4000 rpm table length 650 mm table width 350 mm table load 250 kg feed X-axis 5000 mm feed Y-axis 5000 mm Z-axis feed 4000 mm Line quill 60 mm Fast feed speed 0 - 2000 mm Qb2sx Length x width x height 1500 x 1800 x 1900 mm Weight 1500 kg

Listing

Heilbronn

6843 km

universal Tool Room Milling Machine

Kunzmann WF 7/3

2001

good (used)

Call

Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Chqlskz9g8 Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW...

Listing

Haiger

(dealership location)

6914 km

Kunzmann WF 7/3

excellent (used)

€16,500

ONO VAT not applicable

Call

KUNZMANN WF 7/ 3 Used machine in good condition year of construction: 2007 Machine No.: 379658 Location : 35708 Haiger Price : 16.500 € VB excl. This machine is in very good technical and also optical condition and can be inspected / tested with us under power. Loading possibility available! Technical data: Number of axles total 3 Table length 800 mm Table width 425 mm Longitudinal travel (X axis) 600 mm Transverse travel (Y-axis) 400 mm Vertical travel (Z axis) 400 mm Max. Workpi...

Listing

Remchingen

6887 km

Kunzmann WF 4/3 TNC 124

2001

refurbished (used)

Call

Technical specification: HEIDENHAIN TNC 124 Draw Frame Control working range longitudinal X-axis 400 mm transverse Y axis 305 mm vertical Z axis 400 mm horizontal and vertical spindle - speed range 40 - 4.500 rpm - infinitely variable (via a manually switching gear stage) weight approx. 1.600 kg Twf9ejhr TECHNICAL SPECIFICATION OPTIONS: angular table, rigid clamping surface 650 x 350 mm electronic handwheel Heidenhain HR 410 integrated axis selection keys, feed, rapid traverse and em...

Listing

Waiblingen

6830 km

Vertical machining center

KUNZMANN WF 7/3

2002

excellent (used)

Call

Heidenhain TNC 310 path control Swh3fg travel X/Y/Z = 600/400/400 mm spindle speed infinitely variable fixed angular table 800 x 425 mm vertical milling head spindle SK 40 Hydraulic tool clamping Electric handwheel

Listing

Beringen

6886 km

KUNZMANN WF 650

excellent (used)

Call

With B axis Working travels 650 x 500 x 450 mm Table size 1000 x 600 mm Spindle taper ISO40 Spindle speeds -12'000 rpm Tool changer 20 Pos. Gfzuis9 Control HEIDENHAIN iTNC-530 Coolant through spindle Tool measuring system Heidenhain TT140 3D measuring tracer Heidenhain TS640 MARCELS MASCHINEN CH

Listing

Wiesbaden

6914 km

Tool milling machine

KUNZMANN WF 5/3

1990

ready for operation (used)

Call

table mounting size: 350 x 700 mm x-axis: 500 mm Btyxoc9rwj y-axis: 320 mm z-axis: 400 mm spindle retainer: SK 40 spindle rotations: 30 - 2500 rpm operating voltage: 380 V total energy requirement: 2,2 kW space needed: 1500 x 1500 x 1800 mm weight: ca. 1700 kg

Listing

Remchingen

6887 km

Kunzmann WF 4/3 TNC 124

2002

refurbished (used)

Call

Technical specification: HEIDENHAIN TNC 124 Draw Frame Control working range longitudinal X-axis 400 mm transverse Y axis 350 mm vertical Z axis 400 mm horizontal and vertical spindle - speed range 1 - 4.000 rpm - infinitely variable (via a manually switched gear stage) weight approx. 1.600 kg Angular table, rigid clamping surface 650 x 350 mm Chip splash guard cabin Mounted on chip trap, Swv8lo vertically moving, protected by limit switches 2 sliding doors for operating position in ...

Listing

Waiblingen

6830 km

KUNZMANN WF 7/3

1997

excellent (used)

Call

Heidenhain control TNC 124 Paths X/Y/Z= 600/400/400 mm spindle 4.500 rpm max. tool holder SK 40 clamping area table: 650 x 395 mm max. load: 250 kg P3bomty electr. handwheel Documentation

Listing

Remchingen

6887 km

Kunzmann WF 7/3 TNC 124

2002

refurbished (used)

Call

Technical data: HEIDENHAIN TNC 124 linear control working range longitudinal X-axis 600 mm transverse Y axis 400 mm vertical Z axis 400 mm Speed range horizontal and vertical spindle 1 - 4500 min.-1 infinitely variable weight approx. 1800 kg Cguv9ai2pl Potentiometer for feed speed angular table, rigid Clamping surface 800 x 425 mm Electronic handwheel Heidenhain HR 410 Attachment kit edge finder KT 130

Listing

Waiblingen

6830 km

KUNZMANN WF 410 M TNC 128

2022

new

Call

Universal milling and drilling machine Kunzmann WF 410 M with Heidenhain linear control TNC 128 paths X/Y/Z = 410/350/450 mm speed 1-4500 rpm. Cgs3btipra power 8,5 kW at 100 % ED spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 fixed angle table 650x 375 mm 5 x 14 H7 T-slots coolant unit 66 liters electr. handwheel HEIDENHAIN HR 510 FS Further technical data are available on request. The machine is located in 71334 Waiblingen-Beinstein, is immediately available and can be visited...

Listing

Remchingen

6887 km

Kunzmann WF 4/3 TNC 310

2004

refurbished (used)

Call

Technical specification: HEIDENHAIN TNC 310 contouring control working range longitudinal X-axis 400 mm transverse Y axis 320 mm vertical Z axis 400 mm horizontal and vertical spindle - speed range 1 - 4.500 rpm - infinitely variable feed (rapid traverse) X-, Y-, Z-axis up to max. 5 / 5 / 4 m/min infinitely variable Weight approx. 1,800 kg Universal clamping table Swivels around 3 axes Table surface 650 x 395 mm Electronic handwheel Heidenhain HR 410 Integrated axis selection keys, ...

Listing

Waiblingen

6830 km

KUNZMANN WF 7/3

2000

excellent (used)

Call

Heidenhain control TNC 124 paths X/Y/Z = 600/400/400 mm speed 58-3700 rpm 5,5 kW Mwzpz0 fixed angle table 800 x 425 mm coolant device electr. handwheel chip splash guard cabin machine light

Listing

Ubstadt-Weiher

6883 km

Kunzmann WF7/3

2008

excellent (used)

Call

Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 320 contouring control Super CONDITION CE conform !!! Technical data: >> Year of manufacture 2008 >> Milling table clamping surface 800 x 425 mm Clamping grooves 6 slot width 14 H 7 groove distance 63 mm maximum load 300 kg >> Speeds up to 4500 min-1 >> Feed range up to 2000 mm/min. Rapid traverse up to 5000 mm/min. >> Travels X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tighte...

Listing

Beringen

6886 km

CNC AUTOMATIC DRILLING LINE

KUNZMANN WF4/3

excellent (used)

Call

HEIDENHAIN TNC-320 Working travels 400 x 350 x 400 mm Table size 650 x 350 mm Spindle taper ISO40 Spindle speeds 1- 4'000 rpm Misc.accessories 2unihi MARCELS MASCHINEN CH

Listing

20 Vaux Rd, Finedon Road Industrial Estate, Wellingborough NN8 4TG, UK

7524 km

PEDDINGHAUS TDK 1000/9

1983

good (used)

Call

9 drill spindles (3 spindles per axis). Capacity up to 1000mm. HSS inner coolant drills (oil feed drills). 19 metres infeed roller conveyor. Cie77jw729 7 x 4 metres Cross transfers. 21 metres outfeed roller conveyor. 7 x 7 metres Cross transfers. Fully operational.

Listing

Wiefelstede

6930 km

Control panel/CNC control

Heidenhain Mikron TNC 155 WF 51C/155

used

Call

CNC control, control panel, machining center Csaqcifjly -Manufacturer: Heidenhain, control panel/CNC control from CNC milling machine Mikron WF 51C/155 -Control: Heidenhain TNC 155 -Individual components: see photos -Dimensions: 660/640/H610 mm -Weight: approx. 73 kg

Listing

Hessisch Lichtenau

6811 km

CNC tool machine

MIKRON WF 21 D

1990

used

€8,500

CNC Intorex TMC 3000 Maschining centre 8 (9) axis

Call

CNC tool milling machine MIKRON type WF 21 D CNC-contour control Heidenhain TNC 355 machine No. 5241010 Year of construction 1990 Travel distances X: 450 mm Y: 400 mm Z: 400 mm Table size 700 x 350 mm spindle mount ISO 40 Spindle speed 40-4000 rpm 21 levels Feed rate 2-3000 mm/min. Rapid traverse X and Y 6000 mm/min Rapid traverse Z 5000 mm/min. quill shifting 90 mm distance table - spindle nose max. 450 mm Main spindle drive 3,3 and 4 kW - Splash guard table enclosure - Coolant system - Central...

Listing

6955 km

Intorex TMC 3000

2010

used

Call

Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Cvu70ouzjk Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (H...

Listing

Lithuania

5956 km

Waterjet cutting machines

Waterjet Italy WF 1630 CNC

2003

ready for operation (used)

Call

Control Unit Brand MAGELIS Movement X-Axis Movement 3000 mm Y-Axis Movement 1600 mm Workpiece Workpiece X 2000 mm Workpiece Y 3000 mm Media Nb0b02 Pump drive power 4,1 bar This Waterjet Italy WF 1630 CNC Waterjet cutting machine was manufactured in the year 2003 in Italy. It is equipped with a MAGELIS control unit. Application Types Water Cutting

Listing

Tuřanka 1319/104, 627 00 Slatina, Czechia

6299 km

Horizontal Boring Mill - Floor Type

Fermat WF 13 R CNC

2023

new

Call

New machine ready for pre-acceptance 4 months from the first payment Control: Siemens 840DSL (can be Heidenhain TNC 640) Spindle diameter: 130 mm Head: UHAmi 30 S7exj X-axis: as required Y-axis: 3500 mm Z-axis: 700 mm W-axis: 800 mm V-axis: 2400 mm Main motor power: 41 kW S1 Table dimensions: 2000 x 2000 mm T50 (can be changed) Max. table load: 50 t ATC 32 HV (can be 40) Internal cooling: 70 bar

Listing

Augsburg

6711 km

CNC milling machine vertical

Mikron WF 21 D

1988

good (used)

Call

3 axes Control Heidenhain TNC 151 XYZ 450 x 400 x 400 mm table dimension 450 x 300 mm rpm. 40-4000, 21 speed steps tool holder ISO 40 connection approx. 8,7 kW LWH approx. 2410 x 2695 x 2000 mm Cuiutvhff8 weight approx. 2,5 to

Listing

Wiefelstede

6930 km

Power board CNC control

Heidenhain Mikron PL 110 B WF 51C/155

used

€550

Call

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, Power board -Manufacturer: Heidenhain, power board CNC control from CNC milling machine Mikron WF 51C/155 -Type: PL 110 B -ID No.: 223 216 05 -Voltage: 24V -Dimensions: 395/245/H60 mm Csoms38zhk -Weight: 2.3 kg

Listing

Root

6901 km

MIKRON WF 41 C

like new (used)

Call

Listing

Haiger

6914 km

CNC tool milling machine

Mikron WF 32 C

1996

good (used)

€9,950

Call

Universal CNC Tool Milling Machine from Mikron apply for toolmaker , mold maker, education and Locksmith Travel 600x600x450mm Control Heidenhain TNC 425 Br80kmcu Control CNC Heidenhain TNC 350 Table 900x530mm Travel (X,Y,Z -Achse) 600x600x450mm Toolchanger 22 piece Spindle: ISO 40 Speeds: 20-6300U/min Feeds 0-6000mm/min Power supply 50 Hz 3x 380V Motor 5KW

Listing

Staufenberg

6818 km

KNUTH WF 1 CNC Bahnsteuerung

1995

repair required (used)

Call

CNC milling machine make KNUTH type WF 1 CNC Year of manufacture 1995 technical data: table clamping surface 270 x 700 mm table movement longitudinal X 300 mm table movement vertical Y 200 mm Bxaforg0a2 Table movement crosswise Z 350 mm Spindle mounting horizontal and vertical ISO 40 8 spindle speeds horizontal 110 - 1230 rpm 8 spindle speeds vertical 150 - 1660 rpm. 8 feeds 26 - 290 mm/min rapid traverse 1100 mm/min quill travel 60 mm drive power 3,7 kW dimensions approx. 1310 x 1380 x 1650 mm ...

Listing

Wiesbaden

(dealership location)

6914 km

Internal and external cylindrical grinding - Hard machining

MIKRON WF 41 C

1987

used

Call

table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm Yupphopd carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Listing

Bad Friedrichshall

6840 km

Bahmüller B 45-9 CNC

2005

excellent (used)

Call

Technical data: (Tehnical data) Operation:Internal and external Griding (Operation:Internal and external Griding) Number of axis: 6 axis X1-Z1-X2-Z2-B1-P01 (Number of axis) X1-Z1-X2-Z2 are Hydrostatic axis Pp0ur P01 is internal loader B01 is work piece spindle Working area: mm 200-200-100 (Working area) Number of working spindle: 1woek piece-1internal griding-1external griding (Number of working spindle) Number of tool: 2 (Number of Tools) Tool holder: External wheel max.500mm and in...

Listing

Bretzfeld

6826 km

CNC vertical milling machine

BOKOE WF 3/12 N

1996

excellent (used)

Call

Control TNC Heidenhain 426 CA, rotating universal milling head with collet chuck. Angular milling head SK 40, manual operation. The machine comes from a 1-man operation. Bm8ztjt8f9 X - path 1800 mm Y - travel 1200 mm Z - distance approx. 1360 mm Tool holder SK 50 Throat 1200 mm Table with support on both sides 3200 x 1200 mm sleeve approx. 300 mm Speed range from approx. 5-4200 rpm. max. table load 4 t Weight approx. 20 t Accessories: hydraulic power unit, coolant unit.

Listing

Dellach

(dealership location)

6545 km

Mikron WF 51 C

used

Call

control: Heidenhain TNC 155 tool taper: SK 40 quill stroke: 110 mm table size: 1000 x 500 mm 3bpmx0ro travel: x-710, y-500, z-460 mm spindle speed: 31,5-3150 rpm accessories: angle table, coolant equipment, div. retainers

Listing

Staufenberg

6818 km

CNC universal milling machine

MIKRON WF 21 C Heidenhain TNC 155

1986

good (used)

Call

CNC milling machine make MIKRON type WF 21 C Year of manufacture 1986 Technical data: Travel X-axis 400 mm traverse path Y-axis 400 mm travel Z-axis 400 mm 21 speeds stepless 31,5 - 3150 rpm. tool holder ISO 40 M 16 with feed groove quill movement vertical 90 mm Feed rate in all 3 axes 2-3000 mm/min rapid traverse speed X- and Y-axis 6000 mm/min rapid traverse speed Z-axis 5000 mm/min electrical connected load 8,7 kW dimensions 2900 x 2650 x 2000 mm weight approx. 2300 kg with - rigid angle tab...

Listing

MIKRON WF 2 / 3 DP mit HEIDENHAIN TNC 121

Staufenberg

(dealership location)

6818 km

MIKRON WF 2 / 3 DP mit HEIDENHAIN TNC 121

1981

used

Call

CNC universal milling machine make MIKRON type WF 2 / 3 DP with positioning and linear control HEIDENHAIN TNC 121 year of manufacture 1981 Technical data: longitudinal travel X 400 mm Cross travel Y 400 mm vertical travel Z 575 mm Spindle mounting ISA 40 24 Spindle speeds 30 - 2240 rpm. feeds infinitely variable in all directions 1 - 750 mm/min. Rapid traverse in all directions 1500 mm/min. drive power 6 kW with - autom. tool clamping 9l89diqeh - quill stroke - swivelling vertical milling head -...

Auction

Luckenwalde

6581 km

Milling machine

Kunzmann WF4/3

2009

good (used)

20 days left

Details

Listing

Aurach

6753 km

Kunzmann WF4/3

1997

reconditioned (used)

€11,900