Used Doosan D 30 Nxp Neugerät for sale (62,691)

Condition: excellent (used), Year of construction: 1997, I sell the throughfeed drilling machine with HOMAG BST440/30/D. Year 1997 Configuration: 4+4 motors from under Duedet Nddpspfx Aihsu 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 2+2 motors from top 4 pcs. material pressure from top Very good condition. Available immediately.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2482558, Year of construction: 2021, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 145 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, power: 37.4 kW (50.85 HP), fork carriage width: 1,100 mm, fork length: 1,150 mm, fork width: 122 mm, fork thickness: 45 mm, turning radius (inner): 160 mm, turning radius (outer): 2,460 mm, front tire size: 28-9-15 12, rear tire size: 6-50-10 10, overall weight: 4,610 kg, total height: 2,130 mm, total length: 3,865 mm, total width: 1,725 mm, color: red, Equipment: UVV, cabin, pallet forks, Technical data Year of manufacture: 2021 Engine: Diesel, 37.4 kW Max. load capacity: 3,000 kg Load centre: 500 mm Lift height: 4.30 m Weight: 4,610 kg Fork dimensions (L x W): 1.15 m x 0.12 m x 0.0045 m Overall dimensions (L x W x H): 3.86 m x 1.72 m x 2.13 m Tyres: Super-elastic Max. gradeability: 20% Travel speed: 18 km/h Fully functional, with normal signs of use Dujdjyqznvepfx Aihsu

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2482538, Year of construction: 2021, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 145 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, power: 37.4 kW (50.85 HP), fork carriage width: 1,100 mm, fork length: 1,150 mm, fork width: 122 mm, fork thickness: 45 mm, turning radius (inner): 160 mm, turning radius (outer): 2,460 mm, front tire size: 28-9-15 12, rear tire size: 6-50-10 10, overall weight: 4,610 kg, total height: 2,130 mm, total length: 3,865 mm, total width: 1,725 mm, color: red, Equipment: UVV, cabin, pallet forks, Technical data Year of manufacture: 2021 Engine: Diesel, 37.4 kW Max. load capacity: 3,000 kg Load centre: 500 mm Dodpfx Ajyxm Ursihouu Lift height: 4.30 m Weight: 4,610 kg Fork dimensions (L x W): 1.15 m x 0.12 m x 0.0045 m Overall dimensions (L x W x H): 3.86 m x 1.72 m x 2.13 m Tyres: Super-elastic Max. gradeability: 20% Travel speed: 18 km/h Fully functional, with normal signs of use

Condition: used, functionality: fully functional, machine/vehicle number: 2481358, Year of construction: 2017, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 145 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, power: 34.7 kW (47.18 HP), fork carriage width: 1,100 mm, fork length: 1,150 mm, fork width: 122 mm, fork thickness: 40 mm, turning radius (inner): 160 mm, turning radius (outer): 2,460 mm, front tire size: 28-9-15 12, rear tire size: 6.50-10 10, overall weight: 4,610 kg, total height: 2,130 mm, total length: 3,865 mm, total width: 1,225 mm, color: red, fuel: diesel, Technical Data Year of manufacture: 2017 Engine: Diesel Max. lifting capacity: 3,000 kg Load center: 500 mm Duedpfxsyxmufo Aihsu Lift height: 4.70 m Weight: 4,610 kg Fork dimensions (L x W): 1.15 m x 0.12 m x 0.0045 m Overall dimensions (L x W x H): 3.86 m x 1.72 m x 2.13 m Tyres: Super-elastic Max. gradeability: 20% Travel speed: 18 km/h Fully functional, general signs of use

Condition: used, functionality: fully functional, machine/vehicle number: 2481298, Year of construction: 2017, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 145 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, power: 34.7 kW (47.18 HP), fork carriage width: 1,100 mm, fork length: 1,150 mm, fork width: 122 mm, fork thickness: 40 mm, turning radius (inner): 160 mm, turning radius (outer): 2,460 mm, front tire size: 28-9-15 12, rear tire size: 6.50-10 10, overall weight: 4,610 kg, total height: 2,130 mm, total length: 3,865 mm, total width: 1,225 mm, color: red, fuel: diesel, Technical Data Duodpfx Asyqykvsihsu Year of manufacture: 2017 Engine: Diesel Max. lifting capacity: 3,000 kg Load center: 500 mm Lift height: 4.70 m Weight: 4,610 kg Fork dimensions (L x W): 1.15 m x 0.12 m x 0.0045 m Overall dimensions (L x W x H): 3.86 m x 1.72 m x 2.13 m Tyres: Super-elastic Max. gradeability: 20% Travel speed: 18 km/h Fully functional, general signs of use

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Dodpfey Sazfox Aihouu Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), type: HZO 50/30/600/D/GL piston diameter: 50mm Duedpsyxnwuofx Aihju piston rod diameter: 30mm stroke: 600mm perm. pressure: 103 bar

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. Djdoby Rfpepfx Aiheuu We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm Djdpfx Ajx D Riboihouu • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: good (used), Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Trivac D 30 A & S 30 A Voltage: 400V / 50Hz Suction capacity: approx. 30 m³/h Ultimate pressure: approx. 5x10e-3 mbar & 5x10e-2 Status: Refurbished Warranty: 12 months Accessories: Instruction manual Duedpsb Ii E Defx Aihju Mineral oil filling Quantity: several available Delivery time. from stock

Condition: used, functionality: fully functional, machine/vehicle number: H2120X00.., Year of construction: 2020, operating hours: 1,256 h, load capacity: 3,000 kg, lifting height: 4,980 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork length: 2,200 mm, drive type: Diesel, Diesel Forklift Dusdpfewlwp Hex Aihou VIN: H2120X00.. Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Solid Rubber Rear Tires Condition: 40 - 60% Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Full Cabin

Condition: new, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,760 mm, total length: 4,100 mm, Diesel forklift Manitruck D 30 Dodoxluz Depfx Aihouu Drive Diesel Year built 2023 Lifting height (mm) 4,760 Lifting weight (kg) 3,000

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, analog distribution card, load amplifier, load amplifier -Manufacturer: bg Bernd Grigat, load amplifier from injection molding machine Demag D 100-275 NC -Type: QVA 30/1 Item No.: 2442/00 -Quantity: 2x amplifiers available -Price per piece Dodpfxon Hbcye Aiheuu -Total dimensions: 100/40/H110 mm -Weight: 0.3 kg/pc.

Condition: used, Ferwood Code: RU0001071 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Dedpfxou U D Ahs Aihouu

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Duedpfxoqvnl Tj Aiheu

Condition: used, functionality: fully functional, machine/vehicle number: H2X393J047.., Year of construction: 2018, operating hours: 1,750 h, load capacity: 3,000 kg, lifting height: 6,450 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,840 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: H2X393J047.. Dsdpfx Aieycm A Nshsuu Load center: 500 mm Fork width: 100 mm Fork thickness: 45 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Solid rubber Front tires condition: 80 - 100% Rear tires type: Solid rubber Rear tires condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, ZVG Stabau S11-ZVP35-S

Condition: used, functionality: fully functional, machine/vehicle number: H2X393J04292, Year of construction: 2018, operating hours: 7,509 h, load capacity: 3,000 kg, lifting height: 4,650 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, fork length: 2,200 mm, drive type: Diesel, Diesel forklift Chassis number: H2X393J04292 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tires type: Solid rubber Front tires condition: 80 - 100% Rear tires type: Solid rubber Rear tires condition: 20 - 40% Djdpfjx Ixq Dex Aiheuu Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, STVZO, full cabin, SE tires, white.

Condition: used, Automatic double cell unloader without pit for use in a squaring and edge banding line Motorized panel introduction transfer Double automatic panel unloading station Suction cup system for moving the panels Duedpsrzhftefx Aihju Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Martyr panel management system Programming and control system

Condition: used, Automatic double cell loader without pit for use in a squaring-edging line Motorized panel introduction transfer Double automatic panel loading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Programming and control system Djdpfx Asrzhfhoihjuu

Condition: used, axle configuration: 3 axles, first registration: 04/1984, color: other, Year of construction: 1984, Empty weight: 5.960 kg Axle 1: left 10mm right10 mm Axle 2: left 10 mm right 10 mm Dsdpsyh D R Ssfx Aiheuu Axle 3: left 10mm right 10mm We have the possibility to stack trailers!

Condition: new, table diameter 1200 mm table load 3 t swivelling range 0 - 135 Grad turning speeds 0,07- 0,7 U/min Duedpfofv Azaex Aiheu table height adjustment von 980 bis 1750 mm max. torque on the faceplate 4500 Nm welding current 700 Ampere including remote control and welding current transmission.

Condition: new, table diameter 1300 mm table load 3 t swivelling range 0 - 130 Grad Duodjfv Ax Hjpfx Aihou turning speeds 0,05 - 0,5 U/min 6000 Nm 0 1,1 / 1,1 kW welding current 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. Duodsfv Ayyepfx Aiheu - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 1,604 h, machine/vehicle number: DHKCEAAHSM6051226, USED DOOSAN HYDRAULIC EXCAVATOR IN GOOD WORKING CONDITION MODEL : D80R Dujdpfx Aiey E Hb Sohsu SERIAL : DHKCEAAHSM6051226 YEAR : 2021 HOUR : 1604

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Dsdpeq H Shcsfx Aihouu Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.