Used Bollegraaf Recycling Solutions B.v. Hbc 60 A for sale (82,767)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Dkjdevf E Avjpfx Akgsn Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, For sale is a complete Bollegraaf baling system consisting of conveyor technology, baling press and wire stations. Technical data baler: Dkjdpszbxw Asfx Akgen Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: Machinenummer 230067.020, pressing force: 60 t, power: 45 kW (61.18 HP), operating pressure: 250 bar, Bollegraaf Recycling Solutions, the original manufacturer of this mobile Bollegraaf baler, hereby offers the following machine(s) FOR RENT ONLY: Year of construction: 2022 Weight excl trailer: 22.000 kg Mobile Baler Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Dkodpeh I T Ibofx Akgen Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW

Condition: ready for operation (used), Year of construction: 1999, operating hours: 15,547 h, functionality: fully functional, machine/vehicle number: W99-031.010, pressing force: 60 t, pressure: 250 bar, power: 30 kW (40.79 HP), year of last overhaul: 2024, Equipment: documentation/manual, This used baler is being sold by Bollegraaf Recycling Solutions. This is an HBC60 (30kW) baler with vertical binding. Dkjdpfx Asyux Nxekgsn This baler can be viewed in our overhaul workshop. This baler has only 15,547 hours. Technical condition is very good! (the baler has only baled paper) This baler comes with the following options: * intermediate hopper + distributor * belt feed chute * bale discharge, * wire roller platforms

Condition: new, functionality: fully functional, Year of construction: 2026, RSS 600 series Mono Rotor Shredder new model 2026 Djdpfx Akoirt H Ajgokn 18.5kw Screen size in consultation Motor cover, pusherbox guide strips, PLC controlled. Conveyor and/or discharge screw is optional available. suitable for various types of plastic/wood/or other material Delivery in consultation Larger or smaller models also available. Intrested ?, reactions with your name, company name and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver machines at any place, install when you whish and support you along the way, at any time. Grinder 1000 series 45kW 3 x 2 knife set 2 x stators Dkedog Ainqopfx Akgsn screen your request Product discharge and storage in various options. Other adjustments negotiable. Delivery in consultation. Call or email us for consultation or if you have any questions, important! name company name and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, RSS HD 4 Shaft Shredders in any size, Adjustments to e.g. knives, motors, sieve, frame possible. Supply and discharge belts, storage, metal separation possible. Larger or smaller models also available. optional fast hydraulical screen cleaning or changesystem for advise or information do not wait, contact us. Delivery in consultation. Dkjdpfxsh N Dmns Akgen

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver the machines where you want them, install them if you wish by mutual agreement. Optional: stainless steel drain element, stainless steel storage silo, blower, pipes approx 3 meters. Grinder 800 series 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators screen deck your request Dkjdjt Iw Huopfx Akgon With Variablele Frequency controller, Optional Product discharge and storage in various options in combination extra favorably priced Motor power adaptable. Other adjustments can be discussed such as a rotor adjustment, more blades e.g. 5 rows of blades or heavy duty version. Delivery / time in consultation. Call or email us for consultation or if you have questions, please respond with your name, company name, and correct phone number. Without these correct details RSS Recycling Shredders and Solutions (Netherlands) cannot respond.

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Baler weight: 19000 kg Weight conveyor: 6000 kg Engine: 30 kW Vertical binding Number of wires: 5 Dkedpfjxtmyzox Akgon

Year of construction: 2026, condition: new, functionality: fully functional, DN Solutions PUMA DNT2600M Type: CNC Turning Center (Live Tooling) Dedpoy R E Stjfx Akgjkn Control Unit: Fanuc Chuck Size: 10 Inch with C-Axis Bar Capacity: 81 mm Max. Turning Diameter: 380 mm Max. Turning Length: 610 mm X-Axis Travel: 260 mm Z-Axis Travel: 658–680 mm Spindle Speed: 3500 rpm Spindle Power: 22–26 kW Max. Torque: 327–735 Nm Turret Capacity: 12 Stations Live Tool Speed: 6000 rpm

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,300 kg, total width: 820 mm, total length: 1,650 mm, total height: 1,600 mm, cutting force: 100 t, pressure: 160 bar, warranty duration: 12 months, year of last overhaul: 2026, power: 7.5 kW (10.20 HP), MIZAR ALS Series - Hydraulic Alligator Shear / Crocodile Shear for Scrap Metal & Cables High-Precision Hydraulic Cutting for Scrap Cables & Metals The MIZAR ALS Series is engineered for powerful and reliable hydraulic cutting of scrap cables, aluminum, copper, and various metal profiles. Designed for durability and operational safety, ALS shears deliver consistent cutting performance in demanding recycling environments. ENGINEERED FOR INDUSTRIAL PERFORMANCE & ADVANTAGES • Advanced Hydraulic System: Equipped with a premium Bosch Rexroth hydraulic system to ensure stable pressure, smooth and fast operation, and a long service life. • Hardened Cylinder Shafts: Induction-hardened and chrome-plated cylinder shafts provide superior wear resistance and corrosion protection, ensuring continuous performance under heavy-duty conditions. • High-Strength Blade Technology: Specially processed, high-alloy tool steel blades offer high cutting efficiency and an extended blade lifetime, significantly reducing maintenance frequency. • Industrial-Grade Electronics: All electrical and electronic components are powered by Siemens, ensuring maximum operational reliability and global service availability. Fully CE and EAC certified for international compliance. APPLICATION AREAS • Cable Recycling: Scrap copper and aluminum cables, heavy-duty wire harnesses. • Non-Ferrous Metals: Aluminum profiles, extrusions, and window frames. • Heavy Scrap: Copper busbars, conductor bars, and industrial metal offcuts. • Light Metal Scrap: General metal cleaning and preparation for further shredding or smelting. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material type and capacity) • ALS S1: Compact and efficient solution for medium-capacity operations. • ALS M1: Extended cutting capacity for larger cross-sections and higher throughput requirements. Why MIZAR ALS Series? Djdpjyyuptofx Akgjkn • High hydraulic stability and precision cutting • Long blade lifetime with low maintenance costs • Safe and operator-friendly design (foot-pedal operated) • Plug-and-play installation for immediate use • Built for continuous industrial recycling environments Need a cutting solution tailored to your material? Contact us for a customized quotation, technical details, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: MS06001129, The MlttiScan 600 is used for capturing master data. The articles are measured and weighed using 3D measurement technology. Dedpfx Asy U Upvjkgskn

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Djdpfxedfc Uno Akgjkn SEE THE TECHNICAL DESCRIPTION BELOW Bale Size: 600mm x 400mm x ... Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Capacity:

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW - Machine Weight : 150.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable Dodpfx Akogv Acusgekn

Condition: new, Year of construction: 2025, 1. Electric Motors Total Power: 360 kW 2. Machine Weight: 44.000 kg 3. Shredding Capacity: 10 - 15 tons/h (Iron & Steel) 4. Blade Quantity: 78, Blade Thickness: 150 mm. Dkjdpsdfc Uzofx Akgen 5. Loading Chamber Dimensions: 2350 x 4085 mm 6. Shredding Chamber Dimensions: 1500 x 2000 mm 7. Replacement and maintenance of the blades can be easily done from the top of the chamber. 8. Cutting blades are made of material No: 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (Twisting and breaking resistant ) 10. All chamber walls will be covered with anti-wearing armor steel material HARDOX 500. 11. All static blades and distance rings will be made of HARDOX 450. 12. Speed: 4,5 – 6 rpm 13. The movement power of shafts will be provided by four planet reductors which are driven by four power-controlled bi-directional hydro motors. Hydraulic equipment will be PARKER brand or BOSCH-REXROTH. 14. There will be hydraulic oil and reducer oil cooling units separated from each other. 15. Each shaft will be able to move independently from each other. 16. The loading of the shredder can be done by crane 17. The machine will stop itself with an acoustic warning with the help of security sensors which are going to protect the machine against any harm. 18. There will be an automatic grease oiling system to keep bearings oiled automatically. 19. All electrical parts will be SCHNEIDER and SIEMENS brand. 20. The machine will be fully automatic with PLC control. There will be a touch screen on the control panel which will provide easy access to machine settings and process monitoring. 21. The machine will be under Aymas Makina San. Ve Tic. A. S. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) operation hours. 22. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.

Condition: used, Height: 410 cm Lifting capacity: 1.200 kg Djdpfxsy U H Rrj Akgekn Working height: 410 cm Supply voltage: 24 V The measuring trolley consists of: * Jungheinrich EJC 112 trolley * Mounting adapter * Storage cabinets for PC, batteries and accessories * Touch screen * Hydraulic lock Application: quality control and 3D measurement of parts. Mounted on electric pallet truck Brand: Jungheinrich Type: EJC 212 Year of construction: 2021 CE conformity: yes Lifting capacity: 1.200 kg Working height: 4100 mm Load center distance: 600 mm Battery voltage: 24 V Driving power: 1.6 kW Net weight (without battery): 839 kg Including 2 transport trolleys on rail Capacity: 8000 kg Dimensions: 2250x1800 mm Rail length: 17 m Auction by tender of the production line of KSK GmbH at Schwerte (DE). The site was active within component production for the mobile crane industry and specialized in the production of heavy, welded steel components and long-form structural parts. Among the products processed within KSK were high strength steel grades such as S690QL, S960QL, S1100QL and S1300QL. The online auction opens Wednesday 6 May and closes Tuesday 9 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Dkedpfx Akjx Rqkujgjn Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 4 h, power: 45 kW (61.18 HP), Rotor length: 1000 mm, motor power: 45 + 2.2 kW. Hopper size: 1400 x 1000 mm, screen size available on request. Optional conveyor belt available. Delivery upon request. For more information: RSS Recycling Shredders & Solutions Please include company name for inquiries or questions. IMPORTANT! Provide name, company, and telephone number. Dkedpekzg U Dsfx Akgon

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Dksdpfx Aket Iwt Uegjn reactions or questions ? please with full name, company name and phone number.

Condition: new, Year of construction: 2025, JMC 600 GT on stock. Rental and financing possible The 600 GT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation. Ideal for larger items such as car radiators which can be handled in just one pass. Dodpfjid Ipcex Akgekn The 407/500/600GT can also be adapted to process catalytic converters. JMC catalytic converter shears have been purpose built to recover the valuable dust containing precious metals found in catalytic converters in ELV (end-of-life) vehicles. The shears are sufficiently versatile to be used anywhere in your yard. The catalytic converter is placed in the jaws which are controlled by a foot pedal, and cut open Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out. All JMC Cat Shears can be supplied with dedicated extraction and filtration systems to remove additional dust because this may also contain precious metals. So you can be sure that you will maximise the return from your catalytic converters. Shears in the range include the 407 Cat which has a 407mm, 16″ blade, the 500 Cat which has a 508mm, 20″ blade and the 600Cat which is equipped with a 608mm, 24″ blade.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the common laser printers - also colour prints on glass, wood, textiles, plastic, metal and many other materials New model: PS-UV4060 Max Print head: Epson TX800 2690 dpi max. Including software for printer and image processing weight: 90kg Dkedpfx Ajfbmgfjkgen Operating display Table movement through screw technology 360 degree use possible on request: for bottles and round objects A2 size 45x65cm and 20cm height possible Software setting and printer explanation gladly if required. Germany/Europe-wide.

Condition: new, Year of construction: 2025, machine/vehicle number: 60919029293, This UV printer replaces the common laser printers - also colour prints on glass, wood, textiles, plastic, metal and many other materials New model: PS6090 Max Pro Speed king! Print area: 70x100cm print height: 150mm Vacuum Air Table Water circulation system Print head: 3x Epson TX800 ( CMYK + CMYK + WWWW + VVVV - 18 channels ) 720x1080 / 720x1440 / 720x2160 dpi Including software for printer and image processing Dodpsfvyagofx Akgokn Dimensions: 1900x1600x1220mm weight: 400kg

Condition: new, Year of construction: 2025, This UV printer replaces the common laser printers - also colour prints on glass, wood, textiles, plastic, metal and many other materials New model: PS-UV4060 Max Pro three-head machine 2x CMYK + 4x white + 4x varnish Dsdefvyacjpfx Akgekn Flexibility Monster - colour + white + paint function Print head: 3x Epson TX800 (CMYK + CMYK + WWWW + VVVV / 18 channels) 720x1080 / 720x1440 / 720x2160 dpi Including software for printer and image processing weight: 99kg Operating display Vacuum Air Table - for attracting light materials Table movement through screw technology 360 degree use possible on request: for large round bottles Objects A2 size 45x65cm and 20cm print height printer dimensions: 1000x980x650mm Water Circulation Cooling System Software setting and printer explanation gladly if required. Germany/Europe-wide.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the common laser printers - also colour prints on glass, wood, textiles, plastic, metal and many other materials New model: PS-UV4060 Max Volume For large objects with high passage height Print head: Epson TX800 (CMYK + WW / 6 channels) 720x1080 / 720x1440 / 720x2160 dpi Including software for printer and image processing weight: 90kg Operating display Table movement through screw technology Dodofvx U Hspfx Akgjkn 360 degree use possible on request: for large round bottles Objects A2 size 45x65cm and 40cm print height printer dimensions: 107x106x102cm Water Circulation Cooling System Software setting and printer explanation gladly if required. Germany/Europe-wide.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the common laser printers - also colour prints on glass, wood, textiles, plastic, metal and many other materials New model: PS-UV4060 Max Pro Double / double head machine 2x CMYK + 4x white Speed monster!! Print head: 2x Epson TX800 (CMYK + CMYK + WWWW / 12 channels) Dkedpfxofvx U Ue Akgen 720x1080 / 720x1440 / 720x2160 dpi Including software for printer and image processing weight: 95kg Operating display Table movement through screw technology 360 degree use possible on request: for large round bottles Objects A2 size 45x65cm and 20cm print height printer dimensions: 920x940x570mm Water Circulation Cooling System Software setting and printer explanation gladly if required. Germany/Europe-wide.