5-axis horizontal machining center

Mikron HSM 400 U

Condition: good (used), Year of construction: 2003, MIKRON HSM 400 U 5 axes machining center with 5 continuous axes X 400 mm Y 240 mm Z 350 mm, 42,000 rpm, ATC & 100 places EROWA pallets Robot - can work with or without pallet robot Qjo9F

Year of construction: 2005, Condition: excellent (used), MIKRON HSM 400 U high speed machining center The exact scope of the offer can be seen in the photo gallery. Included are among others: Measuring probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, belt filter system, approx. 50 HSK tool holders etc. 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Swok30 Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Control: Heidenhain iTNC 530 Weight: 5500 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, 5-axis machining center including pallet automation TECHNICAL DETAILS Number of axes: 5 X-axis: 400 mm Y-axis: 240 mm Z-axis: 350 mm Sesnqbmzyj Speed: 42,000 rpm Number of tool changer positions: 100 positions Automation: EROWA pallet robot

Condition: good (used), Year of construction: 2002, operating hours: 16,516 h, Functionality: fully functional, machine/vehicle number: 107.84.00.070, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530 M, rotational speed (max.): 42,000 rpm, TECHNICAL DETAILS Machine type: High-speed center Dqj90B Manufacturer: MIKRON Type: HSM 400 Control: HEIDENHAIN iTNC 530 M Serial number: 107.84.00.070 Year of manufacture: 2002 Cycle times Switch-on time: 25,671 hours Operating time: 22,211 hours Working time: 10,475 hours Spindle running time: 16,516 hours Axes and table Total number of axes: 3 Number of spindles: 1 Max. Workpiece weight on the table: 200 kg Longitudinal travel (X-axis): 400 mm Transverse travel (Y-axis): 450 mm Vertical travel (Z-axis): 350 mm Pallet changing device Quantity: 10 Length: 240 mm Width: 240 mm Tool changer Number of tools: 36 Tool change time: 10 seconds Average chip-to-chip time: 12.5 seconds Tool holder: HSK E40 Spindle Speed infinitely variable from: 100 rpm to: 42,000 rpm Feed rates Work feed: 1-40 m/min X-axis: 0-40 m/min Y-axis: 0-40 m/min Z-axis: 0-40 m/min Rapid traverse: 42 m/min Connections and power Connection: 400 V, 50 Hz, 3-phase Spindle motor power: 12.5 kW Noise level: 75 dB(A) Dimensions and weight Machine weight approx.: 6,500 kg Dimensions (L x W x H): 2,100 mm x 2,400 mm EQUIPMENT Set of tool holders (without tools) Set of collets Water cooler (manufacturer: BURN) Infrared measuring probe (manufacturer: m&h) Tool breakage control (manufacturer: BLUM) Chip conveyor Electronic handwheel Lighting system Hot air shrink unit (manufacturer: HOT SHOT) Machine can be inspected assembled and energized for inspection after consultation.

Condition: ready for operation (used), Year of construction: 2002, Main Drive Spindle speed range 42000 Tool taper HSK E40 Number of axis 3 Movement X-Axis Movement 400 mm Biie7Feexo Y-Axis Movement 450 mm Z-Axis Movement 350 mm Additional Equipment Tool probe Some holders included This 3-axis MIKRON HSM 400 vertical machining center was manufactured in 2002. It features a spindle speed of 42,000 rpm, HSK E40 cone type, and an internal cooling system at 21 bar. The tool magazine accommodates 18 places, and it includes some holders and a tool probe. A great opportunity to buy this MIKRON HSM 400 vertical machining center. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: excellent (used), Number of paletts 18 Carrying force 25 kg Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Misc. accessories F3Tebooyq MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2006, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 42,000 rpm, MIKRON VERTICAL MACHINING CENTER MODEL HSM 400 RUNS 400x450x350 mm Blsu3Nj9Phb SPINDLE 42000 RPM HEIDENHAIN iTNC 530 CNC

Condition: good (used), Year of construction: 2002, operating hours: 16,516 h, Functionality: fully functional, machine/vehicle number: 107.84.00.070, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530 M, rotational speed (max.): 42,000 rpm, TECHNICAL DETAILS Machine type: High-speed center Manufacturer: MIKRON Type: HSM 400 Control: HEIDENHAIN iTNC 530 M Serial number: 107.84.00.070 Year of manufacture: 2002 Cycle times Switch-on time: 25,671 hours Operating time: 22,211 hours Working time: 10,475 hours Spindle running time: 16,516 hours Axes and table Total number of axes: 3 Number of spindles: 1 Max. Workpiece weight on the table: 200 kg Longitudinal travel (X-axis): 400 mm Transverse travel (Y-axis): 450 mm Vertical travel (Z-axis): 350 mm Pallet changing device Quantity: 10 Length: 240 mm Width: 240 mm Tool changer Number of tools: 36 Tool change time: 10 seconds Average chip-to-chip time: 12.5 seconds Tool holder: HSK E40 Spindle Speed infinitely variable from: 100 rpm to: 42,000 rpm Br2Ovfrwfdi Feed rates Work feed: 1-40 m/min X-axis: 0-40 m/min Y-axis: 0-40 m/min Z-axis: 0-40 m/min Rapid traverse: 42 m/min Connections and power Connection: 400 V, 50 Hz, 3-phase Spindle motor power: 12.5 kW Noise level: 75 dB(A) Dimensions and weight Machine weight approx.: 6,500 kg Dimensions (L x W x H): 2,100 mm x 2,400 mm EQUIPMENT Set of tool holders (without tools) Set of collets Water cooler (manufacturer: BURN) Infrared measuring probe (manufacturer: m&h) Tool breakage control (manufacturer: BLUM) Chip conveyor Electronic handwheel Lighting system Hot air shrink unit (manufacturer: HOT SHOT) Machine can be inspected assembled and energized for inspection after consultation.

Condition: good (used), Year of construction: 2012, The machine is in good technical condition, after previous agreement the possibility of testing. Dqnt0H

Condition: excellent (used), Year of construction: 2012, Machining center with 5 continuous axes yom 2012 with Heidenhain TNC 530 control, strokes of X 600 Y 450 Z 450 mm, ATC and 12,000 rpm with chip extractor and CTS (cooling through spindle) In8P2L23T

Condition: good (used), Year of construction: 2006, Working area X-Y-Z: 1,850 mm x 1400 mm x vertical 720 mm/horizontal 905 mm Work table diameter 1600 mm Max. Workpiece weight: 4,000 kg Motor spindle 15,000 1/min NC swivel milling head (A-axis) -20°/+120° NC rotary table (C-axis) Control Heidenhain iTNC 530 IKZ Rotoclear HSK-A63 45-station tool magazine chip conveyor Oil mist extraction Tool measuring device Laser NC 4/HSK-A63 Thermal error compensation in Z Electronic handwheel 3D measuring probe RPM 60 Roof opening for crane loading Qi90Rjo0 Weight: 31,000 kg

Condition: used, Year of construction: 2014, operating hours: 20,294 h, Functionality: fully functional, machine/vehicle number: 107.59.00.166, travel distance X-axis: 400 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 350 mm, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC530, overall weight: 7,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 7,841 h, number of slots in tool magazine: 68, Equipment: chip conveyor, documentation/manual, Mikron HSM 400U LP GS AgieCharmilles 5-axis machining center simultaneous Tool spindle 42000 min-1 Tool magazine 68 x HSK-E40 Macro Magnum rotary swivel table Pallet magazine 18 x Macro Magnum Pallet Macro Magnum d= 156mm Spiral conveyor Second nozzle for cooling lubricant Internal cooling lubricant supply 18-70 bar Dphv7H Oil separator Flushing gun Rotating inspection window Minimum quantity cooling lubrication Mist extraction ITM Intelligent Tool Measurement Infrared measuring probe 40, 00-Ti APS Advanced Process Systems extended ITC Intelligent Thermal Control ITC-5x Intelligent Thermal Control 5Axis Belt filter system 650l Accessories: 18 Marco Magnum pallets with mount Lang Makro-Grip 77mm Night King clamps Approx. 70 Farion Centro-P HSK-E40 holders incl. collets. Machine is sold without warranty. The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as subject to prior sale!

Year of construction: 2013, Condition: used, x-travel 650 mm y-travel 650 mm z-travel 550 mm Control HEIDENHAIN iTNC 530 tool change unit 60 pos. table diameter 600 mm a-axis +91/-120 ° c-axis 360 ° number of spindle speeds 20.000 U/min/rpm tool adaptor HSK-A63 spindle drive 39 kW Hu3N7Fg Internal cooling system 18 - 70 bar chip conveyor kW total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 2006, x-travel 400 mm y-travel 240 mm z-travel 350 mm b-axis +-110 ° c-axis 360 ° spindle drive 12/13 kW Tool taper HSK E40 Cu3Mulaa9C rapid traverse 42.000 mm/min number of spindle speeds 30.000 U/min/rpm tool change unit RANDOM 68 pos. table surface area EROWA ITS 148 palets changer ITS 148, 20 pos. internal coolant system feed Control HEIDENHAIN iTNC - 530 total power requirement kW weight of the machine ca. 7 t dimensions of the machine ca. m

Year of construction: 2010, Condition: excellent (used), AgieCharmilles Mikron HSM 400U Gxb77Hy

Condition: good (used), The scope of delivery includes: Cb79Ntk 01x U- collision protection, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 100 x 50 mm profile dim. outside: U: approx. 80 x 40 mm material thickness: approx. 6,00 mm base plate dim.: approx. 200 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 04 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, cutting width (max.): 428 mm, total length: 1,090 mm, total width: 1,465 mm, space requirement height: 1,200 mm, HSM shredder FA400 Uped3Bh3Ir 90-150 sheets, 374 mm/s 428 mm wide Connected load 4 kV, connection 400V.

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 50 x 50 mm profile dim. outside: U: approx. 40 x 40 mm material thickness: approx. 5,00 mm base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Hbh2Cs97Nv Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, operating hours: 9,800 h, power: 210 kW (285.52 HP), gearing type: mechanical, fuel type: diesel, maximum speed: 90 km/h, first registration: 12/2007, mileage: 1,69,871 km, axe configuration: 4x4, driver cabin: other, wheelbase: 3,080 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, differential lock, seat heater, Chassis version * VarioPilot (right/left shuttle steering) Engine * Radiator grille behind both radiators * Increased engine output * Clean-Fix quick radiator cleaning system * Engine power take-off, to the rear, with flange * Engine PTO drive incl. front PTO shaft * PTO speed limiter Transmission * Downshift transmission with working group * Hydrostatic drive with variable speed motor (SN) * Automatic Shift (EAS). * Transmission oil cooler Axles * Differential lock front axle Frame & frame attachments * Lockable fuel tank * Exhaust pipe upwards * Rear attachment fittings * Reinforced rear cross member * Trailer coupling with large jaw, ring spring Brake system * Two-line trailer brake system Cab exterior * Pre-fitting, cab for mowing door/ mower seat right Unimog * Raising device for cab * Sliding rear wall window (left) Cab interior * Fine dust and pollen filter. * Warning light for telescopic cylinder * Air-suspended swivel seat with seat heating, driver * Air-suspended suspension seat with seat heating, front passenger * Windshield laminated glass, electr. heatable. Electrics / Electronics * Battery main switch on battery box * Continuous current socket 12V/15A, with C3 signal * ABS trailer socket 24 V, additional * Trailer socket 12 V, 13-pin * 24 V front socket, 7-pin * 32-pin appliance socket * 24 V on-board socket in the vehicle with C3 signal * Daytime running lights * Working lights on the chassis, to the rear * Auxiliary headlights for front-mounted implements * Yellow rotating beacons, left + right, with tripods * Alternator 28 V / 100 A (2800 watts) Hydraulics Cuznurfrrg * Proportional dual-circuit hydraulic system * Tilt cylinder * Rear hydraulic plug connection, cell 2+3. * Rear pressure line for 2nd hydraulic circuit * Separate rear return line * Snow plow relief * Hydr. plug connection front 4-fold, cell 1 + 2 * Front pressure line, for 2nd hydraulic circuit * Separate return line at the front * Pressure and return line at the front, hydraulic circuit 3+4 Structure * Quick-change device for flatbed * Platform 2400 x 2050 x 400 mm. Further scope of delivery * Increased load rating. Other * Attachment fittings in the middle. * Fastening parts between axles * 4-celled hydraulic system * VarioPower r,2 .(III+IV),63ccm,125l * Pressure line + sep. return line center, 2nd circuit. * Hydr. plug connection front 4-fold, cell 3 + 4 Unimog * German Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg Dqnbk9 dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture) Machine dealer with own stock of 1600 m².

Condition: used, Functionality: limited functionality, Used hacksaw Dqnmrn Manufacturer Kasto Type EBS 400 U Machine works, but loses oil between the cheeks. Saw blade length 635 mm Weight approx. 900 kg Coolant pump present, but not connected. Item location: 59425 Unna The machine can be inspected under power. A forklift is available for loading. Subject to prior sale. It is possible to examine the items for sale professionally on site. Specific questions should be clarified in advance. The information, e.g. technical data, dimensions, year of construction, condition are non-binding and are given to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, dealers and legal entities. Company names and trademarks are the property of their owners and serve only to identify and describe the products. The installation and electrical connection of the machine/device must be carried out or checked by a trained specialist. Please also have a look at my other offers. Unless otherwise agreed, the item MUST be paid for and collected within 14 days of invoicing. Otherwise the costs for storage will be charged.

Condition: used, saw blade diameter 400 / 425 x 40 mm cutting diameter 40 - 180 mm cutting speed 14/28 m/min capacity 90 degrees: flat 260 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: flat 180 x 80 mm work height max. 1050 mm voltage 400 V Bpzmmzib total power requirement 5.0 kW weight 1170 kg range L-W-H 1230 x 1205 x 1980 mm Furnishing: - semi-automatic underfloor saw - with miter adjustment, swiveling left / right - hydraulic, vertical & horizontal clamping device - large work table - stepless feed from the saw blade - saw blade - machine base

Color: orange, empty load weight: 7,000 kg, tire size: 365/80R20, Year of construction: 2008, Condition: used, tire condition: 70 %, front tire size: 365/80R20 | 70%, rear tire size: 365/80R20 | 70%, maximum speed: 90 km/h, Equipment: air conditioning, compressed air brake, lighting, Tires (v):365/80R20 , Tires (h):365/80R20, First registration:2008, Forward gears:16, Reverse gears:8, Drawbar - automatic_____Selling here a very well maintained and immediately ready for use Mercedes Benz Unimog U 400 6 cylinder with about 9,400 operating hours, about 205,000 KM..000 KM.equipment:Front mounting plate size 3, rear mounting brackets, radio, power door, hydrostat, interchangeable steering, two-circuit hydraulics with EHS, snow plow relief, 3rd circuit line hydraulics, rotating beacon, engine line raised, front PTO, rear cross beam reinforced, mower seat, plunging with large mouth, windshield heatable.customer services are made completely, Tüv newFurther details are available on request...,Storage location:94491 Hengersberg Bith7Wohpse

Condition: used, Year of construction: 2010, operating hours: 5,348 h, power: 175 kW (237.93 HP), gearing type: mechanical, fuel type: diesel, first registration: 01/2010, color: blue, mileage: 1,11,509 km, empty load weight: 11,660 kg, tire size: 405/70 R20, number of seats: 3, driver cabin: other, wheelbase: 3,600 mm, emission class: euro5, Equipment: ABS, additional headlights, all wheel drive, cable winch, crane, differential lock, parking heater, seat heater, * A52 Differential lock front axle * B42 Trailer brake system dual line * C47 Radiator grille behind both radiators Crane Palfinger PK 18001 C Year of construction 2009, crane no. 63.155 Crane superstructure behind driver's cab Crane carrier frame with hydraulically extendable 4-fold outriggers Crane with hydr. 4-fold extension, max. hydr. outreach 12.60 m Control system with 6 crane functions Equipment for 2 hydr. attachments Radio remote control with 6 functions Start-stop and speed function, actuation via radio remote control Load values: 4.30m = 4,000 kg 6.30m = 2,550 kg 8.30m = 1,840 kg 10.40m = 1,420 kg 12.60m = 1,160 kg Hydraulic oil filling: Panolin bio-oil Steel platform on crane carrier frame, three-way tipper, 2200x 2440x 400 mm Accessories: clamshell bucket 200 l, with rotary motor and additional timber grab Werner M79 H1 ZW 0013 frame cable winch with recovery support Year of construction 2009, winch no. 63.157 Pull rope winch to the rear, with winding device Rope diameter 13 mm, length approx. 60 m Pulling force in the lowest rope layer 7780 daN Pulling force in the top rope layer 5650 daN Winch control via crane radio system Rgcsihfco Direct contact/ used vehicles and equipment: Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Overall weight: 7,000 kg, color: orange, operation weight: 7,000 kg, maximum load weight: 7 kg, tire size: 385/65R22.5, Year of construction: 2011, Condition: used, tire condition: 60 %, front tire size: 385/65R22.5 | 60%, rear tire size: 385/65R22.5 | 60%, maximum speed: 90 km/h, Equipment: air conditioning, compressed air brake, lighting, Tires (v):385/65R22.5, tires (h):385/65R22.5, forward gears:24, reverse gears:16, first registration:27.01.2011, towing jaw - automatic_____We sell here a very well maintained Mercedes Benz Unimog U 400 from year of construction 2011.approx. 4.900 operating hours, approx. 87. 000 kilometers.000 kilometers.tires 385/65R22.5 with approx. 60% profile.crawling gears, tachograph, Tüv until August 2023, SP until February 2023, rotating beacon, front PTO, 4 cell hydraulics.machine ready for immediate use.more pictures will follow shortly.....,storage location:93095 Hagelstadt Dm9Wz2