Used As 1050 for sale (1,359)

Listing

Request more images Request more images Already requested

10

Israel

4,539 km

Lathes

Mazak INTEGREX i-630V/6

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2017, Operating hours: 10,186 h, General Data Measurements width 5362 mm Measurements depth 7703 mm Measurements height 3813 mm Machine weight 35000 kg Control Unit Brand MAZAK Model MAZATROL SMOOTHX CNC Ibkuig8y0 Main Drive Spindle speed range 10000 Movement X-Axis Movement 1425 mm Y-Axis Movement 1050 mm Z-Axis Movement 1050 mm B-Axis Movement 150º C-Axis Movement 360º Workpiece Workpiece drm over bed 1050 mm Workpiece drm over support 1000 mm Table Outer length 630 mm Outer width 630 mm This Mazak INTEGREX i-630V/6 Lathe was manufactured in the year 2017 in Japan and has 10186 cutting hours. It is equipped with a MAZAK MAZATROL SMOOTHX CNC control unit. The machine has a spindle speed of 10000 rpm. Application Types Turning

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

Bacău

5,494 km

CNC Engine Lathe

REM SN 1600x10000

Price info Price info Already requested Call

Condition: as good as new (ex-display), Year of construction: 2023, Parallel Lathe turning/milling/grinding1600x10.000 -Height of centers above bed guideways - 1050 mm - Passing diameter above bed guideways - 2000 mm - Passing diameter above sled - 1600 mm - Distance between centers 1- 10000 mm - Bed width - 1150 mm - Bed guideways number - 3 - Main drive motor power - 60 kW - Spindle speed -1 - 160 rot/min - Maximum toorque Nm 40000 - Maximum weight of the parts 1 - 25 tons - Table diameter - 1600mm - Headstock quill diameter - 275 mm - Tailstock quill diameter - 260 mm - Transversal sled travel - 580 mm - Longitudinal feed domain - continous variation - 1- 6000 mm/min - Transversal feed domain - continous variation - 1 - 6000 mm/min - Passing diameter through center rests (closed support) - 100 - 700 mm - Machine is equipped with 3 steady rests - Total machine weight: 40.400 kg. - Last edition CNC Fanuc 0i TF equipment. - New electrical components. - New hydraulic equipment. 3. Grinding device Ezonesfav - Revolution range 1500 rot/min - Total horizontal travel - 1050 mm 4. Milling device - motor 14/10 kW; - revolution range 1500/750 rot/min

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Subic Bay, Philippines

4,413 km

2200 Ton ROLL PRESS SKEM SRP2000 -20M

SKEM SKEM-SRP2200-20M

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2007, YOM: (2007); Max. Roll Length 20 M; Min. Daylight between Roller 960 mm; Max. Ram stroke 1050 mm; Top Roll diam. 500 mm; Bottom Roll 420 mm; 8 sets of Back-up Rolls; Min/Max Bottom Roll Centers 500/800 mm; Pressing Speed 1 to 6 mm/sec. Ram Approach 60 mm/sec; Bgfxncpn3hy Main Motor 125 HP. Including Spare for Bottom Roller, control panel, panel boxes and conveyors. Capacity: 2200 TON, Working size: 20,000mm x 25t, 5,000mm x 40t

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Radom

6,026 km

Table for hard cover making

Lidograf Casemaker MT 1050/740

Price info Price info Already requested Call

Condition: new, Table for hard cover making 1050×740 Ctlyoqsf39 The device is brand new, with a 12 month warranty. European production, based on brand-name components. Work cycle: The operator manually hands the covering material to a gluing device in which the animal glue is automatically applied (working temperature 60-70’C). The covering material sheet with the glue applied, the operator places it manually on the stage, then manually adds the cardboard and joint board sheets. The operator prepares the pre-prepared cover manually to the device in which the top and bottom of the covering material are wrapped up and glued (patented brush system). During the sizing operation, the cover is pressed through the arrangement of the guide rollers. Covers leaving the device are immediately suitable for further processing The machine is equipped with: – A gluing machine applying glue to the top of the sheet – table with a suction – fixing elements for covering material and cardboard – a module for wrapping the cover – receiving table Technical data: Max format: 1050x740mm Min format: 140x140mm Capacity: 100-150 covers / h Thickness of the layer: 80-170 gsm Thickness of cardboard: 1-4mm Wrap up: 13-20mm Temperature of the adhesive: 30-100 ‚C Capacity of the bender: 2-3kg Smooth speed control of rollers and brushes Types of veneer material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1600x1800x1000mm Power supply: 380V Power consumption: 3.7kW Weight: 300kg We invite you to tests to our headquarters Machines are available from stock.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Bang Phli District, Samut Prakan, Thailand

2,440 km

OFFSET UV Machine

KBA RA 105-6+L CXPWVA RA 105-6-L CXPWVA

€2,45,000

FOB ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Year of construction: 2001, KBA RAPIDA 102-6-L age 2001 Serie No, 051-7 0110 0218 Di9qcv No impression 215 MM Printing units: 6+Lack Size 720x1050 mm Technical features: Speed 15.000 sheet/h Min paper size 360 x 520 mm Thickness 0,08 - 1,2 mm UV Eltosch 3 interdek removable for all unit 3 lamps at end of press Ink tempurature water cool system ANILOX Trasue (No 60/80/100) Fully equipped Steel plate on feeder and delivery Suction tape feeder Preset feeder automatic thickness and paper size setting Double sheet detection - electric Antistatic feeder and delivery Varidamp continuous dampening with combo Technotrans refrigeration & re-circulation Inking unit temperature control for duct roller and oscillating distributors Colortronic all units Impression cylinder washing device - automatic Blanket washing device - automatic Ink-roller washing device automatic CX package for cardboard up to 1.2mm Coating unit TRESU doctor delivery extension

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

10

Mažeikiai

6,087 km

Vertical CNC machining centre

Toyoda PV6

€14,900

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Feed speeds 15000 mm/min. Bgrj9mlwf2 Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Dimensions in mm: about 3000 x 5000 x 2900 Weight in kg: about 13000

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Hungary

6,062 km

Erosion machines

Sodick AQ750L

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement 750 mm Y-Axis Movement 500 mm Z-Axis Movement 400 mm V-Axis Movement 520 mm U-Axis Movement 770 mm Table Outer length 1050 mm Cuynkeoydo Outer width 750 mm Height adjustment 400 mm Table load 1500 kg This Sodick AQ750L Erosion Machine was built in 2002. The machine has 5 axis, with an X-Y travel movement of 750 x 500 mm. Application Types EDM

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Łódź

6,154 km

Injection molding machine

Battenfeld Plus 350/75

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 1997, Battenfeld Plus 350/75 Year of manufacture: 1997 Injection unit: Screw diameter: 22 mm Injection weight: 34.5 g Injection pressure: 2034 bar Metering volume: 38 ccm Clamping unit: Clamping force: 35 t tie bar distance: 270 mm size of clamping platens: 470x280 mm ejector: hydraulic clamping unit: hydraulic Control system: UNILOG 1020 Additional equipment: Euromap 12 Robot interface Biogw7nnbpe Dimensions: Weight: 1050kg Length/width/height: 2.24x0.88x1.70m Drive: Pumps/motor: 7,5 kW Heating power: 2,76 kW Total power: 10,26 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Sierakowska Huta

6,304 km

Low-spindle milling machine

STEHLE

€1,250

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Catalog number 7207 TECHNICAL DATA - spindle diameter 30mm - working height of the spindle 120mm - replaceable spindle - spindle locking - adjustable up/down - original cast iron guide - 4 types of rotation speeds + right/left - tabletop dimensions 1060x770mm - cast iron top - 4kW motor - dimensions length/width/height 1060x1050x1070mm - weight 510 kg Dm8ylz ADVANTAGES – German production – used milling machine - very good condition Net price: PLN 5500 Net price: EUR 1250 Net price calculated at the exchange rate of PLN 4.40/EUR (with larger exchange rate fluctuations, the price may change)

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

10

Radom

6,026 km

Stacker

Baumann Wohlenberg BA 2N

Price info Price info Already requested Call

Condition: good (used), Stacker Baumann Wohlenberg BA 2N The machine is 100% functional and in perfect condition. This is the latest design from a German manufacturer. Technical data: Max format: 750 x 1050 mm Stack height: 1100mm Weight: 800kg Power supply: 400V Air table Ndcv8ftp3 Chrome table surface Fence protecting the machine’s work area (original by Baumann).

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Wiener Neudorf

(dealership location)

6,311 km

Eccentric Press - Single Column

PresseRoss PresseRoss 20V2

€13,800

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Year of construction: 2005, gebraucht 2005 7289 prompt, Zwischenverkauf v Italien 13800 € 1 20 to 550 mm 370 mm 110 mm 5 - 75 mm 160 1/min 187 x 143 mm 35 mm 38 mm 185 mm 225 mm 225 mm 1,5 kW 1050 mm 1250 mm 2100 mm 1150 kg Bak3ayjzuut 2 V-guides Front and side table shielding by safety doors 2-hand control and foot pedal Clamping plate Thickness table and clamping plate 50/50 mm User Manual in German CE Declaration of conformity

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

9

Tyczyn

5,934 km

pallet rackings Schaffer 6100x1050

Schäfer PR350

€11

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

load per truss pair (max.): 2,100 kg, total height: 600 cm, load capacity per storage section: 2,100 kg, total depth: 1,050 mm, Condition: good (used), Year of construction: 1995, Functionality: fully functional, pallet rackings Schaffer 6100x1050 beams 2700mm 3x700 kg -1500 pcs Bcwlrskfon frame 5800-6100x1050mm -400 pcs

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

10

Hungary

6,062 km

Machining centers (vertical)

Okuma MX55-VA

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 7000 Tool taper HSK63 Movement X-Axis Movement 1050 mm Y-Axis Movement 560 mm Gmddg8 Z-Axis Movement 450 mm Table Outer length 1300 mm Outer width 560 mm Height adjustment 800 mm Table load 700 kg This OKUMA MX55-VA Vertical Machining center was manufactured in the year 2000 in Japan. The machine has a spindle speed of 7000 rpm. Application Types Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Łódź

6,154 km

Injection molding machine

Battenfeld Plus 350/75

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 1996, Battenfeld Plus 350/75 Year of manufacture: 1996 Injection unit: Screw diameter: 22 mm Injection weight: 34.5 g Injection pressure: 2034 bar Metering volume: 38 ccm Clamping unit : clamping force: 35 t tie bar distance: 270 mm size of clamping platens: 470x280 mm ejector: hydraulic clamping unit: hydraulic Control system: UNILOG 1020 Additional equipment: Biogwctdhg2 * Dimensions: Weight: 1050 kg Length/width/height: 2.24x0.88x1.70 m Drive: Pump/motor: 7.5 kW Heating power: 2,76 kW Total power: 10,26 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Sierakowska Huta

6,304 km

Low-spindle milling machine STEHLE

STEHLE

€1,568

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Catalog number 7210 TECHNICAL DATA - spindle diameter 25mm - working height of the spindle 120mm - replaceable spindle Dm8nxp - adjustable up/down - original guide with full adjustment - trolley with material pressure - guide on the trolley adjustable at an angle - 4 types of rotation speeds + right/left - tabletop dimensions 1050x770mm - 3.7 kW motor - dimensions length/width/height 1850/1950/1100mm - weight 673 kg ADVANTAGES – German production – sidecar – used milling machine, very good condition Net price: PLN 6,900 Net price: EUR 1568 Net price calculated at the exchange rate of PLN 4.4/EUR (with larger exchange rate fluctuations, the price may change)

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

8

Radom

6,026 km

Perfect binder

Fastbind Elite XT

Price info Price info Already requested Call

Condition: good (used), Fastbind Elite XT perfect binder The machine is in very good visual and technical condition. Possibility of gluing hard and soft covers and blocks. The machine is equipped with milling. Perfect for photobooks. Original product – Made in Finland Hard cover strip included as well as a soft cover set. Description: Technical capabilities of the machine: cycles / hour. up to 450 Productivity: books / hour up to 180 Min./max. binding thickness 0.1–50 mm max. glued spine length 455 mm 3red8z0cew max. cover thickness 400 g/m² Voltage 220-240V Machine dimensions (W/L/H) 1050 x 520 x 570 mm Weight 70 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Wiener Neudorf

(dealership location)

6,311 km

Folding Machine

ERBEND UFA 1015

€6,320

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Year of construction: 2023, neu 2023 8305 prompt, Zwischenverkauf v Türkei 6320 € 130.82 € 1 1050 mm 1.5 mm 1 mm 2.2 mm 150 ° 500 mm 200 mm Cplahcfnwm 1300 mm 750 mm 1515 mm 280 kg Verstellbereich 35 mm sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC adjustable angle gauge shelve and box for tools machine on rolls with brakes operating manual in German or English

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

7

Yerevan

3,926 km

Flexo printing machine

Bielloni Saba 6 slv

€1,30,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 2006, Machine is six-colored, the max width of printing is 800mm, the material width is 920mm. The minimum print repeat is 340mm and max print repeat is 1050mm. the central drum's diameter is 1410mm. Printing rollers Bbq7b3bc2qn Z=78 L=390 Z=80 L=400 Z=84 L=420 Z=92 L=460 Z=106 L=530 Z=116 L=580 Adapter sleeves for L=530 and L=580 Anilox rollers L = 120l/sm ,,volume 11 sm3/

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

8

Hungary

6,062 km

Machining centers (vertical)

DOOSAN DNM 5700

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2019, Operating hours: 1,200 h, Control Unit Brand FANUC Bwqe22tobw Model 0iMF Main Drive Spindle speed range 12000 Spindle motor power 18,5 kW Number of axis 3+1 Movement X-Axis Movement 1050 mm Y-Axis Movement 570 mm Z-Axis Movement 510 mm Table Table load 1000 kg This DOOSAN DNM 5700 Vertical Machining Center was manufactured in the year 2019 and has 1200 production hours. It is equipped with a FANUC 0iMF control unit and has 3+1 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Price info Price info Already requested more

Auction

9

Osterhofen

6,561 km

Plotter

HP DESIGN JET 1050C PLUS

13 days left

Details

Condition: used, 1 x HP DESIGN JET 1050C PLUS plotter Color: black Dimensions(cm): L:150 W/D:40 H:130 Condition: used Xfttjbyxa Storage location of goods: Entrance room left

more

Listing

Request more images Request more images Already requested

6

Leipzig-Stahmeln

(dealership location)

6,632 km

Dickenhobelmaschine PLANERMAX 630 DELUXE

WINTER

€6,900

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, - Hobelbreite 630 mm - Hobelhöhe min./max. 3-300 mm - max. Spanabnahme 8 mm - min. Werkstücklänge 280 mm - Abmessung Dickentisch 1050 x 630 mm - Motor 7,5 kW / 400 V - Drehzahl 4800 U/min - Sicherheitsmesserwelle Z = 4, FI 120 mm mit 4 Streifenhobelmesser 630 x 35 x 3 mm - Vorschubgeschwindigkeit stufenlos 0 - 16 m/min. - segmentierte Stahleinzugswalze - 2 glatte Stahl Auszugswalzen - Dickentisch auf 4 Tragspindeln - elektrische Höhenverstellung - Dickentisch vorprogrammierbar mit Digitalanzeige der Hobelhöhe Myex3o - Holzablage mit kratzfreier Teppichauflage - Absaugstutzen 150 mm - Messereinstelllehre - Abmessungen L=1200, B=1100, H=1160 mm - Gewicht 950 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Barsbüttel

6,795 km

Surface Grinding Machine

BLOHM HFS 9

Price info Price info Already requested Call

Condition: used, grinding length:900 mm grinding width:400 mm workpiece height:600 mm table clamping area :1320 x 300 mm speeds::1400-2800 U/min grinding wheel diameter - max.:400 mm grinding wheel width max.:80 mm grinding wheel hole diameter:127 mm table height over floor:1050 mm total power requirement:11 kW Bisb9fhrost dimensions of the machine ca.:3800 x 2230 x 2300 mm weight of the machine ca.:4 t

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Wiener Neudorf

(dealership location)

6,311 km

Tryout Press - hydraulic

SICMI PSV 70

€13,800

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 13800 € 282.9 € 70 to fix 350 mm 900 mm 1050 mm max. 9 mm/s 2 kW 1900 mm Bilvflj8jdq 850 mm 2250 mm 1030 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Send inquiry Send inquiry Already requested more

Listing

Hamburg

6,807 km

Diesel Forklift

Hyster H4.50XL

€9,900

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

fuel type: diesel, Condition: used, Year of construction: 1994, Operating hours: 7,314 h, Diesel Forklift Istnkoi Capacity: 4500kg Load Centre: 500 Lift height: 3450mm Overall Length: 3250mm Overall width: 1850mm Closed height: 2470mm Overall weight: 6640kg Mast type: Standard Fork length: 1050mm YOM: 1994 Condition: Einsatzbereit und voll funktionsfähig Zustand Technisch: very good Engine: Perkins Bereifung vorne Typ: Pneumatic tires Bereifung vorne Grösse: 8.25-15 Bereifung hinten Typ: Pneumatic tires Bereifung hinten Grösse: 7.00-12 Description: Wir haben neben diesem Hyster Modell noch ca. 200 Schwerlaststapler, Kompaktstapler, Gabelstapler & Seitenstapler in unserem Lager Hamburg und Danzig. Besuchen Sie unsere Homepage - Mietkauf & Finanzierung zu günstigen Konditionen sind für uns jederzeit machbar. Gerne kaufen wir auch Ihren Gebrauchten frei an, auch ohne dass Sie ein Fahrzeug bei uns erwerben. Unser Inhaber Herr Peter Sawitzki berät Sie gerne ausführlich zu diesem H4.50XL P.S.: Unsere Stapler-Meisterwerkstatt ist auf Reparatur, Instandsetzung, Überholung und Sonderbau für Gabelstapler ab 8 to. spezialisiert. Gerne stellen wir auch Ihr Fahrzeug bei uns zum Kommissionsverkauf aus. 3rd valve,

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

3

Slovakia

6,072 km

Machining centers (vertical)

Eumach FBE-4000

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2013, General Data Dmjwud Machine weight 22500 kg Control Unit Brand Fanuc Model Series 31i Main Drive Number of spindles 1 Spindle speed range 3500 Number of axis 3 Movement X-Axis Movement 4000 mm Y-Axis Movement 1000 mm Z-Axis Movement 950 mm Workpiece Workpiece weight 9000 kg Table Outer length 4100 mm Outer width 1050 mm Tools Slots in storage 24 Type of tool holder 50 This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm. Application Types Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Kassel

6,831 km

Welding rotary and turning table

FÖRSTER AE 1380 (3000x1500 mm)

€1,900

FCA Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: repair required (used), Year of construction: 1999, Welding and turning table Fabr. FÖRSTER Type AE 1380 Serial # 864409 Year of construction 1999 Cvn8jafy9h Technical data: Table size 3000 x 1500 mm Drive power 3 kW Dimensions approx. 3500 x 1900 x 1300 mm Weight approx. 1050 kg used, in good condition FÖRSTER reversible welding tables are equipped with an electromotive rotary drive which enables the table surface to be positioned continuously. Special price, as available in stock as motor defective € 1.900,--

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Hessisch Lichtenau

6,811 km

Straightening and welding plate cast steel heavily ribbed

1200x800

€850

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Straightening and welding plate cast steel heavily ribbed length 1200 mm width 800 mm thickness 150 mm working height 1050 mm plate thickness approx. 30 mm continuous - simple metal base weight 270 kg Ytnl98 good condition

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

3

Nürtingen

6,831 km

Wire EDM machine

GF AgieCharmilles Progress VP3

Price info Price info Already requested Call

Condition: refurbished (used), Year of construction: 2014, GF AgieCharmilles Progress VP3 Year of construction 2014 Travels: X= 500 mm, Y= 350 mm, Z= 426 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG-VPC generator AGIEVISION 5 control unit Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg Bis8jh7jqku The machine is cleaned and overhauled by us after receipt of order. You receive a 6-month warranty on all machine parts. We are also happy to offer you commissioning and training

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Freising

6,652 km

Membrane Filtration System

Pentair Südmo GmbH

Price info Price info Already requested Call

Condition: used, Year of construction: 2015, Additional title: Beer Membrane Filtration (BMF) J0tpzq Capacity approx.: 175 hl/h filtrate Flow rate: 330 m3/h un-filtrate pump Flow pressure: 1 bar un-filtrate pump Number of modules per skid: 18 pcs. (no. of BMF Skids - 4 St.) Length: approx. 10500 mm Width: approx. 7000 mm Base construction: Modules mounted on frame Features: 1 x BMF Modulblock; 4 x BMF Skid, je 18 Membranmodulen Membrane filter system for the filtration of beer. The BMF system consists of 1 module block and 4 BMF skids with 18 membrane modules each.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Crailsheim

6,778 km

Electric 3-wheel forklift

Yale ERP16ATF

Price info Price info Already requested Call

Condition: used, Year of construction: 2002, Operating hours: 7,200 h, Electric 3-wheel forklift Capacity: 1600kg Load Centre: 500 Lift height: 4350mm Free lift: 1380mm Overall Length: 1750mm Overall width: 1050mm Closed height: 1970mm Overall weight: 3440kg Mast type: Triplex Fork length: 1100mm YOM: 2002 Zustand Technisch: good Engine: Elektro Fahrmotoren 2x5.8 kW Bereifung vorne Typ: Super Elastic Bereifung vorne Grösse: 18x7-8 Bereifung hinten Typ: Super Elastic Bereifung hinten Grösse: 15x4 1/2 Batterie Baujahr: 48 Description: Yale ERP16ATF Klasse H Antriebsmotor und die DrehstromHydraulikmotoren werden drehstrombetrieben, dadurch sanfte Wechsel zwischen Vorwärts- und Rückwärtsfahrt sorgt für ein wirklich nahtloses Fahren. Der Stapler ist mit einer automatischen Feststellbremse und mit Ölbad-Lamellenbremsen ausgerüstet. Lenkung Der Lenkmotor ist ein bürstenloser Gleichstrommotor. Standardmäßig sind die Stapler mit einer geräuscharmen, energiesparenden hydrostatischen transistorgesteuerten Servolenkung ausgestattet. Die Leistung des Staplers kann über das moderne Armaturendisplay auf die Anforderungen Ihres Einsatzes oder auf die Vorlieben Ihres Fahrers eingestellt werden, wobei 4 vorprogrammierte Leistungsstufen zur Verfügung stehen. Optional gegen Aufpreis: - Seitenschieber - Zinkenverstellung - usw. 3rd valve, Arbeitsscheinwerfer vorn, Overhead guard, Front screen, + Beleuchtungsanlage Cf7iub2bm9

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

12

Poland

6,172 km

Lathes

DMG MORI CTX510 eco V3

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2008, Operating hours: 28,127 h, Control Unit Brand Siemens Model 810D ShopTurn Main Drive Spindle speed range 3250 Movement X-Axis Movement 300 mm Z-Axis Movement 1050 mm Media Main electronic connection 400V / 50 Hz Power consumption 40 kVA This DMG MORI CTX510 eco V3 Lathe was manufactured in the year 2008 and has 28127 production hours. It is equipped with a Siemens 810D ShopTurn control unit. The machine has a spindle speed of 4000 rpm. Bb9mwv2nck0 Application Types Turning

Price info Price info Already requested more

Listing

Deutschland

6,760 km

Frame press

MAWEG HILDEBRAND Euro-Z

€2,500

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Year of construction: 1990, Working width 3250 mm Working height 2300 mm Number of cylinders 7 St. Dimensions (L/W/H) 4400 x 1050 x 3200 mm loading dimensions L x W x H 4400 x 1050 x 2950 mm Fzglxmc Maweg Hildebrand frame press EURO-Z ----- Press with 2 medium pressure beams! External dimensions approx.: Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm Loading height: 2,950 mm Pressing dimensions: length = 3,250 mm, height = 2,300 mm Printing plates: depth=100 mm, width=120 mm Selling ex location as stated. You can see the press in use until around the end of January 2024. (technical information according to the manufacturer - no guarantee!)

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Hessisch Lichtenau

6,811 km

E-welding machine, rod electrode welding device

ESAB LTG 250

€480

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Year of construction: 1997, ESAB type LTG 250 electric welder Stick electrode welder Machine No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED I3emjqr 150 Amp. = 100 % ED Power adjustment: stepless - Electrode holder with 6 meter connection cable - Direct current - fan-air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug space requirement L x W x H 1200 x 750 x 1050 mm weight 180 kg good condition Unit was originally designed also for TIG welding. The hose package for TIG welding is not present and the function has not been tested. The water cooling was for the hose package for TIG welding. The unit is therefore sold only as an electrode welder.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Gerolzhofen

6,761 km

edge belt sanding machine

Holzstar Typ KSO 750 / 230 V

€830

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, - NEW - Make Holzstar Type KSO 750 / 230 V - With swivel-mounted sanding unit and oscillating sanding belt - With oscillating sanding belt for a good removal rate, a clean sanding pattern and a longer service life of the sanding belt - With height-adjustable sanding table - With -45° to 45° infinitely adjustable mitre and workpiece fence as standard - Infinitely adjustable sanding unit (0°-90°) for vertical and horizontal sanding - Table height adjustment - Robust cast iron work table with T-slots, stable stand of the machine during work - With height-adjustable additional table for contour sanding - Quick and easy sanding belt change via quick-release system - Spring-loaded tensioning device for even belt tension - Sanding base with graphite coating as standard - Suction nozzle Ø 100 mm - With lockable storage option in the standard base - With lockable emergency stop switch Equipment details: - Thanks to the infinitely adjustable sanding unit, the edge sanding machine is suitable for a wide variety of sanding processes such as vertical and horizontal sanding. vertical and horizontal sanding Scope of delivery: - Mitre fence Coefioz0bd - Workpiece fence 700 x 60 mm Technical data: Table height min./max. 970 / 1050 mm Table height adjustment 80 mm 80 mm Longitudinal table dimensions 750 x 250 mm Cross table dimensions 300 x 250 mm Belt length 2260 mm Belt width 150 mm Sanding surface 820 x 170 mm Sanding drum diameter 110 mm Sanding belt speed 16,3 m/s Suction nozzle Ø 100 mm Motor power 2.2 kW Electrical connection 230 V Mains frequency 50 Hz Weight 120 kg Dimensions (L x W x H) 1300x750x1200 mm . 5900751 Storage location 97447 Gerolzhofen - free loaded -

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

Poland

6,172 km

Machining centers (horizontal)

DMG MORI NHX6300

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2018, Operating hours: 429 h, General Data Measurements width 3930 mm Measurements depth 5823 mm Measurements height 3228 mm Machine weight 18750 kg Control Unit Brand DMG MORI Model ERGOline Main Drive Spindle speed range 8000 Number of axis 4 Movement X-Axis Movement 1050 mm Y-Axis Movement 900 mm Z-Axis Movement 1030 mm Table Outer length 630 mm Outer width 630 mm Table load 1500 kg Tools Max weight 30 kg Max tool length 630 mm This DMG MORI NHX6300 horizontal machining center was made in the year 2018 in Japan and has 429 hours. It is equipped with a DMG MORI ERGOline, CELOS with FANUC control unit, and has 4 axis. The machine has a spindle speed of 8000 rpm. Application Types Dlaamz Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Hessisch Lichtenau

6,811 km

TIG welding machine

DALEX TGKW 55

€780

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Year of construction: 1975, TIG welder DALEX type TGKW 55 Serial No. 532521 Year of construction approx. 1975 power 225 Amp. = 60 % ED Bc9vsd2yic 125 Amp. = 100 % ED Adjustment range 2.8 to 225 amps Current type direct current and alternating current (AC-DC) Mains connection 380Volt, 50 Hz - Power adjustment via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable - 2-stroke and 4-stroke welding device - Remote control with rotary potentiometer for fine adjustment - Digital display for amperes - TIG hose package 4 meters - Welding gas pressure reducing valve - Water cooled Space requirement L x W x H 1050 x 610 x 890 mm weight 290 kg good condition

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Gerolzhofen

6,761 km

Edge sanding machine

Rehnen Junior R1

€3,900

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, -New- The upper part in heavy cast design with built-in three-phase motor 380 V, 2.2kW, 2850 rpm; the machine is equipped with built-in Switch and plug combination; Motor protection switch and main switch according to VDE; Dimensions of the back wall of the sanding belt: 850 x 150 mm; Bwzz3esm Steel table adjustable in height by means of spring pressure; Tape measure: 150 x 2280 mm; the back wall of the sanding belt is covered with a graphite sliding coating; the machine is supplied with an assortment of sanding belts; The scope of delivery also includes a bracket and Miter fence. The machine is connected to a central extraction system with one air speed Dust-tested at least 20 m / s (GS) Holz-BG-Stuttgart. Technical specifications: Motor power: 2.2 kW Sanding belt size: 150 x 2280 mm Sanding belt speed: 22 m / sec. Table size: 750 x 350 mm Required space: 1000 x 800 mm Weight: from 180 kg Extraction D .: 100 mm Item No. 1050-500000 Incl.: - swiveling 90-180 ° Item No. 1050-590010 - Belt oscillation item no. 1050-590020 - Support table on the pulley Item No. 1050-590040 - pneumatic belt tension Item No. 1050-590155

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Poland

6,172 km

Milling machines

Weeke Optimat BHC 280

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2003, General Data Measurements width 5900 mm Measurements depth 3800 mm Measurements height 2200 mm Machine weight 4000 kg Control Unit Brand WEEKE Movement X-Axis Movement 3310 mm Y-Axis Movement 1735 mm Z-Axis Movement 220 mm Table Outer length 2750 mm Outer width 1050 mm Media Main electronic connection 400V / 50Hz This Weeke Optimat BHC 280 Drilling, Sawing and Milling machine was manufactured in the year 2003 in Germany. It is controlled by a WEEKE control unit. The machine has a workpiece thickness of 100 mm. Application Types Ispnfse Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Tschechien

6,393 km

Punching machines

Trumpf Trumatic 500R

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2000, Operating hours: 36,200 h, General Data Machine weight 11050 kg Control Unit Brand Bosch Main Drive Punching force 220 kN Table Outer length 5050 mm Outer width 1250 mm Max Material Thickness Steel 8 mm Media Power consumption 19 kVa General Data Machine weight 11050 kg Iy9o3zphb Control Unit Brand Bosch Main Drive Punching force 220 kN Table Outer length 5050 mm Outer width 1250 mm Max Material Thickness Steel 8 mm Media Power consumption 19 kVa This Trumpf Trumatic 500R Punching machine was manufactured in the year 2000 in Germany and has 36200 production hours. It is equipped with a Bosh control unit. The machine has a punching force of 220 kN. Application Types Punching

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Tschechien

6,393 km

Laser cutting machines

Trumpf TruLaser 1030

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2010, Operating hours: 27,000 h, General Data Machine weight 8900 kg Main Drive Gkxy9s Laser power 2 kw Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Media Power consumption 65 kva This TRUMPF TruLaser 1030 Laser cutting machine was built in the year 2010 in the United States and has 27000 hours, of which 10500 are laser hours. The machine has a laser power of 2 kW. Application Types Laser Cutting

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Slovenia

6,393 km

Machining centers (horizontal)

Mandelli storm 1100

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2000, Control Unit Brand Fanuc Model 160i-M Main Drive Spindle speed range 32000 Number of axis 3 Movement X-Axis Movement 1000 mm Y-Axis Movement 800 mm Z-Axis Movement 1050 mm Ko02opiyf7 This Mandelli Storm 1100 Horizontal Machining center was manufactured in the year 2000 in Italy. It is equipped with a Fanuc 160i-M control unit and has 3 axis. The machine has a spindle speed of 32000 rpm. Application Types Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Italy

6,576 km

Machining centers (vertical)

Okuma MX55 VB

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 1998, General Data Measurements width 3000 mm Measurements depth 2700 mm Measurements height 2700 mm Machine weight 9000 kg Control Unit Brand OSP Model 700 M CNC Main Drive Spindle speed range 12000 Tool taper BT 50 Xp8yi0v0 Movement X-Axis Movement 1050 mm Y-Axis Movement 560 mm Z-Axis Movement 450 mm (light on the vertical mm. 610) Table Outer length 1300 mm Outer width 530 mm This Okuma MX55 VB Vertical Machine Center was made in the year 1998. It is equipped with an OSP 700 M CNC control unit. The machine has a spindle speed of 12000 rpm and is equipped with through-spindle cooling at 20 bar, an automatic pallet changer, and a chip conveyor. Application Types Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Italy

6,576 km

Machining centers (vertical)

Mazak VCN 510C

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand Mazatrol Model 640M Nexus Main Drive Spindle speed range 12000 Spindle motor power 18,5 kw Number of axis 3 Movement X-Axis Movement 1050 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Outer length 1300 mm Outer width 550 mm Table load 1200 kg Additional Equipment Chip conveyor This Mazak VCN 510C vertical machine center was built in 2005. It is equipped with a Mazatrol 640M Nexus control unit and has 3 axis. The machine has a spindle speed of 12000 rpm, is fully revised, in perfect condition like new. Application Types Milling Gpawfoq7id

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Italy

6,576 km

Machining centers (vertical)

Okuma MB 56-VA

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 7500 kg Control Unit Brand Okuma Model OSP U100 Main Drive Spindle speed range 15000 Spindle motor power 22/18.5 Kw Number of axis 3 Movement X-Axis Movement 1050 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 32 m/min. Table Outer length 1300 mm Outer width 560 mm Clxk7yov Table load 900 kg Tools Slots in storage 20 Type of tool holder BT-40 This OKUMA MB 56-VA Vertical Machining center was manufactured in the year 2003. It is equipped with an OKUMA OSP U100 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm. Application Types Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Germany

6,760 km

Injection moulding machines

Engel VICTORY 1050/220

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2003, Operating hours: 98,371 h, General Data Machine weight 12900 KG This Engel VICTORY 1050/220 Injection moulding machine was manufactured in the year 2003 and has 98371 production hours. Application Types Injection Moulding Evmw9cdu

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Germany

6,760 km

Machining centers (vertical)

MTcut UD140H-5A

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2015, Operating hours: 36,922 h, General Data Machine weight 32000 kg Control Unit Brand Heidenhain Model iTnc 530 SmarT.NC Main Drive Spindle speed range 15000 Movement X-Axis Movement 1620 mm Y-Axis Movement 1260 mm Z-Axis Movement 1050 mm B-Axis Movement 0,001° x 180° C-Axis Movement 0,001° x 360° Tools Type of tool holder HSK 63 This MTcut UD140H-5A Vertical Machine Center was made in 2015 and has 36922 production hours, of which 7442 are spindle hours. It is equipped with Heidenhain iTnc 530 SmarT.NC control unit. The machine has a spindle speed of 15000 rpm. Czv2ajaqde Application Types Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Germany

6,760 km

Machining centers (vertical)

DMG DMU 125 T

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 1998, Operating hours: 28,018 h, Control Unit Brand DMG Model MillPlus Main Drive Spindle speed range 8000 Tool taper SK50 R9q7m9z Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Table Outer length 1500 mm Outer width 1050 mm Table load 2500 kg Tools Slots in storage 30 Media Chip conveyor Yes This DMG DMU 125 T Vertical Machining Center was manufactured in the year 1998 and has 28018 hours, of which 9528 are cutting hours. It is equipped with a DMG MillPlus control unit. The machine has a spindle speed of 8000 rpm. Application Types Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Germany

6,760 km

Milling machines

FEHLMANN Versa P825

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2010, Operating hours: 11,045 h, General Data Machine weight 10500 kg Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 50-20000 Spindle motor power 24 kW Number of axis 5 Movement X-Axis Movement 820 mm Y-Axis Movement 700 mm Z-Axis Movement 450 mm C-Axis Movement 360º Tools Type of tool holder HSK- A63 General Data Machine weight 10500 kg Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 50-20000 Spindle motor power 24 kW Number of axis 5 Movement X-Axis Movement 820 mm Bgdl3jor2m0 Y-Axis Movement 700 mm Z-Axis Movement 450 mm C-Axis Movement 360º Tools Type of tool holder HSK- A63 This FEHLMANN Versa P825 Milling machine was manufactured in the year 2010 in Switzerland and has 11045 hours. It is equipped with a HEIDENHAIN ITNC 530M control unit and has 5 axis. The machine has a spindle speed of 50-20000 rpm. Application Types Milling

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Germany

6,760 km

Injection moulding machines

Engel 1050/275 HL

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 20000 Control Unit Brand Engel Injection Unit Screw diameter 55 mm Bcfty7xzrek Clamping Unit Clamping force 2750 kN This Engel Es 1050/275 HL Injection moulding machine was manufactured in the year 2003 in Austria. It is equipped with an Engel control unit. The machine has a clamping force of 2750 kN and a screw diameter of 55 mm. Application Types Injection Moulding

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

Germany

6,760 km

Machining centers (horizontal)

Quaser HX404

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 2365 mm Measurements depth 4915 mm Measurements height 2895 mm Machine weight 10500 kg Control Unit Brand FANUC Model 31 LB Main Drive Spindle speed range 15000 Spindle motor power 26 kW Movement X-Axis Movement 560 mm Y-Axis Movement 640 mm Z-Axis Movement 640 mm B-Axis Movement 360º Tools Type of tool holder BT 40 Additional Equipment pallet is included No zero point clamping systems included 1x hydraulic power unit (motor) Bf23yos7w7j This Quaser HX404 Horizontal Machining center was manufactured in the year 2016 in Taiwan. It is equipped with a Fanuc 31 LB control unit. The machine has a spindle speed of 15000 rpm. Application Types Milling

Price info Price info Already requested more

Save search query