Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams
-comes: from an Atlas hydraulic excavator
Zo327qo
-Piston diameter: approx. 115 mm
-Piston rod: Ø 70 mm
-Bore piston rod: Ø 60 x 45 mm
-Bore hydraulic cylinder: Ø 50 x 71 mm
-Stroke: 720 mm
-universally applicable:
-Number: 1x stamp available
-Price: per piece
-Dimensions: 1290/250/H140 mm
-Distance to the center holes: 1130 mm
-Weight: 124 kg
The basic parameters of this compressor are:
Pw3qam
* capacity 1440 l/min
* main motor power 11,0 kW
* tank 500 l
* maximum working pressure 10.0 atm
* built-in refrigerant dehumidifier
* electronic setting of compressor working parameters
* soundproofed cabin ( only 67 dB )
* complies with CE standards
* instruction manual in Polish and a set of documents for UDT (Office of Technical Inspection)
* weight 340 kg
* 2022 year of production
* manufacturer's warranty available
* available immediate...
ATLAS 1702D
Year: 1985
Operation hours: 10.327
ROPS
Hydr. 2 piece boom
Stick: 1,90 meter
Gripper-, Hammer- line
Rfscx
2 shell grabs
Tyres: 10.00-20 approx 10-20% good
Blade support and 4 point stabilizer
Deutz 6 cylinder engine typ F6L918 with 72kW
CE
Operation weight: 21 to.
-Year of construction 2019
-Weight approx. 9,850kg
-Financing for traders
-Hours approx. 822
-Engine Deutz TCD 3.6 L4 100KW
-20km/h
-Street legal
-Customer service NEW / UVV
-All wheel steering / front wheel / crab steering
-Fan reversible
-Automatic climate control
T9f2cnq
-LED headlights 2x front and rear
-Radio with speakerphone
-Hydr. quick coupler
-Earth bucket 2500 mm TPV 1.55 cbm
-Pallet fork 1200 mm
-3. Control circuit elec.prop.serial
-Pressure relief for control circuit in front
-Socke...
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
- Atlas Copco - T 30 R-01 Flexiroc | Used Drill in good condition. Our expert inspector checked 68 inspection points - 68 were approved, 0 showed imperfections, 0 presented issues. Buy it now for
EUR 97.000
or make us an offer. We can deliver from Nokia, Finnland to your destination. You can estimate the cost using our price calculator. Surf...
Type: AT 500 Condition: functionally tested, very good, used - suction capacity 650 l - boiler capacity 500 l - maximum pressure 12 bar - automatic star delta switch
Ch2uxcvtky
-Year of construction 2019
-Weight approx. 9,850kg
-Financing for traders
-Hours approx. 1100
-Engine Deutz TCD 3.6 L4 100KW
-20km/h
-Street legal
-Customer service NEW / UVV
-All wheel steering / front wheel / crab steering
-Fan reversible
-Automatic climate control
-LED headlights 2x front and rear
-Radio with speakerphone
-Hydr. quick coupler
-Earth bucket 2500 mm 1.55 cbm
-Pallet fork 1200 mm
-3. Control circuit elec.prop.serial
-Pressure relief for control circuit in front
-Socket in front ...
Generator in very good condition, looks like new. The unit has hydraulic outputs visible in the pictures.
The machine has documents
I issue a VAT invoice
Year 2019
Operating hours: 4510
Model Atlas Copco QAS60
Kva 60
Kw 48.6
V 400
A 87.6
Country of manufacture Spain
H8ix9eeum
I also have other aggregates at attractive prices.
Year 2013
Engine hours 10,400
Nominal output power
40 KVA
rated current
57.1A
nominal voltage
400V
Libra
1041 kg
Type of cooling
in
Transport length
Dmnkjkd
2.1m
Transport width
0.95m
Transport height
1.17m
Engine manufacturer
Kubota
Engine type
V3800DI-T
Engine power
38 kW
Emission level
3A
Atlas Copco ga 11 ff compressor with integrated dryer (the compressor is super functional, the dryer must be checked as it is faulty).
Cr0cjxga
bars max 10
power 11kw-15hp
air flow litres/min 1680
Screw compressor ATLAS COPCO type GA 310 PACK
Ser. # ABP718625
Technical data:
capacity 4,3 m3/min
max. power 10 bar
Speed 2925 rpm.
Power 30 kW
Dxflg922
with
- Water separator
- Flair dryer / Delair DDA 24
- Running time 44711 hours
used, in good condition
Emulsion splitting plant Oil-water separation system
The inexpensive and permanently reliable
The solution to the problem is usually the oil/water
Befumu0m
Separation for dispersed condensates. The
purified water meets the legal
Sewer discharge regulations
-Dimensions: 650/520/H1000 mm
Atlas Copco
ZS4 VSD+ 45kW 1.0 E
screw blower
Cigyyg2wzn
Screw blower, oil-free compressing with sound insulation hood with control and frequency converter.
Cooling: air
Drive power: 64.00kW
Final pressure: 1200mbar
Delivery quantity: 7.25 - 30.33m³/min
Motor bearing damage
feed pressure: 10 bar
liter capacity: 10 l
total power requirement: kW
volume capacity: 10,1 l/sec.
Qkp72
Number of working hours: 35642 h
revolutions per minute of the motor:: 1500 U/min.
rated capacity: KW
connected load: 11 kW
machine weight approx.: 488 kg
dimensions L x W x H: ca. 1,1 x 0,8 x 1,0 m
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
1994 - Atlas - 1204 | Used Wheeled Excavator with 11743 hours in poor condition. Our expert inspector checked 53 inspection points - 34 were approved, 14 showed imperfections, 5 presented issues. Buy it now for
EUR 8.500
Cvojwd7g
or make us an offer. We can deliver from Lipsko, Polen to your destination. You can estimate the cost using our p...
Pneumatic double diaphragm pump
-Fast venting and immediate suction of the medium
-Dry running without: damage
-Hermetically sealed for: moisture-sensitive liquids
-Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces:
-Air max. Pressure: bar
-Air connection: 1 "inch
-Water output: l/min
-Water max. Pressure: bar
-Connection: B coupling
-Dimensions: 480/400/H530 mm
-Weight: 32 kg
Bcavd2zxj9
feed pressure: 9,75 bar
liter capacity: 10,1 l
total power requirement: 5,5 kW
volume capacity: 10,1 m³/min.
Number of working hours: 26071 h
revolutions per minute of the motor:: 3000 U/min.
protection class: CE 0038
machine weight approx.: 310 kg
dimensions L x W x H: 1,2 x 0,6 x 1,0 m
Z2vrs
Condensate separator installed
Atlas Copco COMPRESSOR WITH 12 MONTHS WARRANTY, LIST PRICE EURO 15204, POSSIBILITY TO COMBINE DRYER (AVAILABLE).
Fosvzvyz
MAIN FEATURES:
BAR MAX 10
POWER 18KW-25HP
AIR FLOW MINUTE:3120
Atlas Copco screw compressor GA 22-7,5. Power 22 kW, capacity 59,2 l/s, working pressure 7,5 bar, year of manufacture 1991, dimensions d.1200, w.800, h.1000 weight 520kg.For the last four years it has been used as a reserve, due to insufficient power it has been scrapped. The price of 1300 euros is quoted without VAT
Ivrt27shy
Used diesel power generators in good mechanical condition.
35kVA/28kW.
Engine: Yanmar
Alternator: Sincro
Operating hours: approx. 11000
Manufacturing date: 2004
Available for immediate collection in Denmark.
4699 EUR plus VAT. (VAT extempt if payment from outside Denmark).
Civsz3vwuc
EXW Greve, Denmark.
Payment prior to collection.
No warrenty. Bought as is.
First come first serve.
operating pressure: 13 bar
volume capacity: -
voltage: 230 V
air-pressure connection: Aus- und Eingang: 1" Zoll
total power requirement: 0,54 kw
weight: ca. 52 kg
dimensions L x W x H: 0,8 x 0,4 x 1,0 m
- dehumidifying of compressed air
- working pressure air conditioning max. 35 bar
- refrigerant R 134 A
- heat exchanger
- size 320 x 180 x 315 mm
- fan dia. = 260
7nkgtxinl
end of rental compressor, machine always maintained by our technicians, perfect (the customer bought a new compressor).
latest generation touch module
pressure: bar max 13
min capacity liters : 27800
Ifcvw8epu
power :180 kw-245 hp
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Stroke: 250 mm
-Piston diameter: 40 mm
-Piston rod: 16 mm
-Price: per piece
-Number: 2 pieces
-Dimensions: 410/55/H55 mm
2rnqya
-Weight: 1.5 kg/piece
Atlas Copco COMPRESSOR WITH WORLDWIDE WARRANTY, PROMPT DELIVERY, 200 LT TANK, INTEGRATED DRYER, DD FILTER AND RXD SPECIAL OIL. PRICE LIST EURO 11684
MAIN FEATURES:
Rb8td
BAR 1O MAX
POWER 7KW-10HP
AIR FLOW 1062
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders
-Stroke: 50 mm
-Piston diameter: 50 mm
-Piston rod: 16 mm
-Price: per piece
-Number: 2 pieces
H8k3iu7
-Dimensions: 100/65/H65 mm
-Weight: 0.75 kg/piece
Atlas Copco COMPRESSOR WITH WORLDWIDE WARRANTY, NEW MODEL COMPLETE WITH 500 LT TANK, UD LINE FILTER AND INTEGRATED DRYER. LIST PRICE EUROI 25538
MAIN FEATURES:
BAR MAX 10
0e2dstj9
POWER 22KW-30HP
AIR FLOW MINUTE:3720
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200-40
Bub0ad2wri
-Stroke: 240 mm
-Piston rod: Ø 40 mm
-Number: 2x cylinders available
-Price: per piece
-Dimensions: 320/280/H470 mm
-Weight: 34 kg/piece
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200-40
-Stroke: 200 mm
-Piston rod: Ø 40 mm
Gtt3tl3uw
-Total dimensions: 330/280/H510 mm
-Weight: 33 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200
-Stroke: 194 mm
H3xa9ti9
-Piston rod: Ø 40 mm
-Total dimensions: 220/265/H645 mm
-Total weight: 24 kg
We make it easier for you to find: "atlas 72 c"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Morlock Motors official partner of Machineseeker and Truckscout24
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.