Belt sander air, metal sander, sanding machine air long and narrow (LUCH-00050) Speed = 16000rpm Sanding belt = 10x600mm Air connection = 1/4'' Hose connection = 3/8'' Average air consumption = 170 L/min Working pressure = 6.3 bar Includes 3 sanding belts grit 60 + 80 + 120 Separate sanding belts are available from us (LUCH-00279) AIR TOOLSAir tools, also called pneumatic tools, are often used in combination with a compressor. The compressor can be connected to the tool with a compressed air hos...
Sander (pneumatic), sanding machine on air, compressor sanding machine, air pressure sanding machine (LUCH-00092). Speed = 16,000rpm Sanding belt = 10 x 330mm Air connection = 1/4'' Hose connection = 3/8'' Average air consumption = 170 L/min Working pressure = 6,3 bar Includes 3 sanding belts grit 60 + 80+ 120. Loose sanding belts are available from us (LUCH-00278) AIR TOOLSAir tools, also called pneumatic tools, are often used in combination with a compressor. The compressor can be connected to...
used disc sanding and belt sanding machine
300 mm pulley diameter
V0cpqtrl
The SICAR CL2NRT wide-belt sander
9bw7dkw
Location
Gorzów Wlkp.
Conditions of delivery
Cost of delivery
to be agreed
Start type
to be agreed
Description
Comments
dwywałowa with a boot
one motor feeds two shafts
With 2 sanding units consisting of: - Calibration roller - Combination unit with rigid shoe - Roller table at the inlet 350 mm - Roller table at the outlet 350 mm second hand Make SCM - DMC - Technosand Type TC 1100 MC Year of manufacture 2000 Machine no. SA / 004295 Working width approx. 1100 mm Passage height approx. 160 mm CE-type tested Number of units 2 pieces Belt dimensions 2630 mm x 1150 mm 1 piece calibrating roller 22 kW fluted 1 piece combination unit 11 kW with rubberized roller Diam...
CATALOG NUMBER 6089
TECHNICAL DATA
- max width of the processed element: 1300mm
- max height of the workpiece 180mm
2 aggregates:
1) grooved rubber roller for calibration
2) metal roller + shoe + metal roller
in advance:
- rubber roller, pressure roller
- aggregate
- rubber roller. pressure
- aggregate
- rubber roller, pressure
from down:
- pulling tape
- oscillation of pneumatic straps
- electric table top lifting + manual
- 0.44kW lifting motor
- 2 types of feed speed
- 0.85kW feed motor
- 22...
Working width 130 cm
Working height 15 cm
Ikmltr3da
18,5 kW 11 kW Motor
two units first rubber roller second 2 metal
Very good condition.
Wide belt sander Sandingmaster
type CSB 3 900
sanding width 900 mm
Hsngxtn
throughfeed height 160 mm
1 calibrating roll 15 kW and
1 sanding pad 11 kW
With cleaning brush
With 2 sanding units consisting of:
- calibration roller
- Combination unit with running shoe
Btmsqlapji
with a new feed carpet
second hand
Make Sandingmaster
Type CSB2-600
Machine no. 7612312
Operating hours 7805.45
Working width 600 mm
Passage height approx. 150 mm
Aggregates from above 2 pieces
Belt dimensions 630 mm x 900 mm
Feed speed 7/14 m / min.
1 piece calibration roller 7.5 kW
Diameter 250 mm
1 piece combination unit 7.5 kW with rubberized roller
Air shoe
Required space approx. 160...
- working width 1100mm
- calibrating unit with steel shaft
- kombi unit with rubber shaft
- pneumatic pad
Gfczkl2mc
- material measurement
- pneumatic activation of machine options
- pneumatic oscillation with photocells
- pneumatic band tension
- variable regulated feeder
Wide belt sander SCM Sandya 5 RCS 110
working width 1100 mm
working height 150 mm
two aggregates
1. sizing roller
2. Combination unit with viscera
Btp9j2ij8k
the viscera is shot automatically
driving engine with power 7,5 kw
weight of the machine: 1200 kg
CE-marking
Belt grinder make Unknown
Technical data:
belt width 40 mm
Dfhmll9fs
Support table 400 x 265 mm
Outer dimensions 550 x 700 x 1500 mm
Weight approx. 80 kg
used, in good condition
SCM SANDYA WIDE BAND SANDER 10
sanding width 1100 MM
Oq3h73p3
1 calibration unit with steel roller
2 combo unit (with rubber shaft and foot)
Feed rate infinitely adjustable
electric table adjustment
table position display
18.5 kW engine driving both units
conveyor belt in very good condition
Belt sanding machine with agregate.
Year of production: 2006
Sanding head with brushes: 1,8kW
Sanding agregate with adjustable angle: 2,6kW
Bho2uvlt09
Machine with feeding belt included.
Bütfering Optimat SCO 213/CE/Sandy
The 2-belt machine for pre- and re-sanding of veneered workpieces with 2 electronic sanding pads. Calibrating and pre-grinding with the contact roller in the first unit.
Varnish sanding package
Constant table
new frequency converter
grinding width 1300 mm
Year of manufacture 2004
Bourjjnsyj
Checked for function
SCM SANDYA WIN wide belt sander
- very good condition
- DTR in Polish
- CE
TECHNICAL PARAMETERS:
Bkxfkhxbkl
grinding width 610 mm
grinding height 3 - 140 mm
metal shaft + shoe
electric height adjustment
pneumatic oscillation
two kinds of feed speed
7.5 kW main engine
0.3 kW feed motor
height adjustment motor 0.25 kW
dimensions (length / width / height) 100 x 105 x 200 cm
weight 489 kg
Wide belt sander SCM Sandya 10
Machine model: RCS 110
working width 1100 mm
working thickness min/max: 3/160 mm
grinding belt dimension 1110×2150 mm
two grinding units:
Cfku0xhe
calibrating roller
combi aggregate with a shotgun
common motor with power 15 kw
grinding belt cleaning system on the second unit
conveyor with a vacum system
stepless regulation of the conveyor speed
optical oscillation
CE-marking
machine dimensions: 1800x1800x2000h mm
BSander 150.200 machine is a machine polisher to grind tube front and profile ends, edges grinding and cylindrical grinding on the upper surface of the plant.
Band size 150 x 2000 mm
Belt speed 29 m/s.
4,0 kW / / 3 x 400 V / / 50 Hz dimensions L x W x H 700 x 530 x 1130 mm
Wgtkowa
Weight 90 kg
Price on request
Sanding belt dimensions 2000 x 150 mm
belt speed 29 m/s
Motor 4.0 kW; 3 x 400 V; 50 Hz
Bitiumv7ib
Dimensions:
L= 700 mm; W= 530 mm; height 1130 mm
Weight 90 kg
Wide belt sander SCM Sandya 20 RRR 1350 mm
Motors with power
Bslkynun27
1.18,5 kw
2.15 kw
3. 9/11 kw two-speed
Continuous regulation of feeding speed
Pressure skids
Year 1998, CE standard
BSander 75.200 machine is a machine polisher to grind tube front and profile ends, edges grinding and cylindrical grinding on the upper surface of the plant.
Belt dimensions 2000 x 75 mm
Belt speed 29 m/s
Power of 3 kW dimensions L x W x H 700 x 490 x 1130 mm
Yrxz78
Weight 72 kg
Price on request!
Sanding belt dimensions 2000 x 75 mm
Bht7sal8
belt speed 29 m/s
Motor 3.0 kW; 3x 400 V; 50 Hz
Dimensions:
L= 700 mm; W= 490 mm; height 1130 mm
Weight 72 kg
(Price without undercarriage)
sanding belt dimensions: 1220 x 100 mm
belt speed: 19 m/s
Bitirw2kty
Motor 1.5 kW; 230 V; 50 Hz
Noise level: 83-87 dB/A
Dimensions:
L= 610 mm; W= 390 mm; height 330 mm
Weight 40 kg
Sanding belt set, 3 pieces (LUCH-00279) Suitable for :LUCH-00092 60, 80 and 120 Grit 10 x 330 mm Sanding belt 10 x 330 mm, 3 pieces. Find here the right sanding belts for your belt sander. A belt sander is mainly used for removing large amounts of material on often large surfaces. Around the belt sander is an oval belt. This belt moves like a caterpillar over the surface. For the optimal result it is advised to let the belt sander rest on the surface. The machine should always be used with the s...
Lower Disc Master Sander
Model DM DDD BB
Year 2006
Max Working Width 53”
Vt2pie
Max Working Height 4”
16 Sanding Discs
Variable Disc Speed 50-300 RPM
Electronic Display
2 Rotating Roller Disc Sanders
Variable Speed 14-300 RPM
One with feed One Against the Feed
Vacuum Bed
Motorized Height Adjustment
480 Volts 3 Phase 60 Operation
Sanding belt set, 3 pieces (LUCH-00278) Suitable for :LUCH-00092 60, 80 and 120 Grit 10 x 330 mm Sanding belt 10 x 330 mm, 3 pieces. Find here the right sanding belts for your belt sander. A belt sander is mainly used for removing large amounts of material on often large surfaces. Around the belt sander is an oval belt. This belt moves like a caterpillar over the surface. For the optimal result it is advised to let the belt sander rest on the surface. The machine should always be used with the s...
5 sanding discs 2", P500 (LUCH-00287) Grain 500 5 pieces This sanding disc set is for the LUCH-00169 !The number 100 stands for the amount of grains that are present on 1 square centimetre. The sandpaper with the indication P100 has therefore 100 grains on 1 square. The sandpaper with the indication P180 has therefore 180 grains on 1 square. The sandpaper with the indication P40 has only 40 grains on 1 square. The bigger the number, the finer the sandpaper because there are more grains on 1 squa...
Sanding disc 6"(150 mm), P320, 5 pieces (LUCH-00292) Korel 320 With holes 5 pieces This sanding disc set is for the LUCH-00259 !
Ekeswf9
Sanding disc 6"(150 mm), P60, 5 pieces (LUCH-00295) Grain 60 With holes 5 pieces This sanding disc set is for the LUCH-00259 !The number 100 stands for the amount of grains that are present on 1 square centimetre. The sanding paper with the indication P100 has therefore 100 grains on 1 square. The sanding paper with the indication P180 has therefore 180 grains on 1 square. The sanding paper with the indication P40 has therefore only 40 grains on 1 square. The bigger the number, the finer the san...
Sanding disc 6"(150 mm), P120, 5 pieces (LUCH-00293) Grain 120 With holes 5 pieces This sanding disc set is for the LUCH-00259 !The number 100 stands for the amount of grains that are present on 1 square centimetre. The sanding paper with the indication P100 has therefore 100 grains on 1 square. The sanding paper with the indication P180 has therefore 180 grains on 1 square. The sanding paper with the indication P40 has therefore only 40 grains on 1 square. The bigger the number, the finer the s...
Sanding disc 6"(150 mm), P80, 5 pieces (LUCH-00294) Grain 80 With holes 5 pieces This sanding disc set is for the LUCH-00259 !The number 100 stands for the amount of grains that are present on 1 square centimetre. The sanding paper with the indication P100 has therefore 100 grains on 1 square. The sanding paper with the indication P180 has therefore 180 grains on 1 square. The sanding paper with the indication P40 has therefore only 40 grains on 1 square. The bigger the number, the finer the san...
5 sanding discs 2", P320 (LUCH-00288) Grain 320 5 pieces This sanding disc set is for the LUCH-00169 !The number 100 stands for the amount of grains that are present on 1 square centimetre. The sanding paper with the indication P100 has therefore 100 grains on 1 square. The sanding paper with the indication P180 has therefore 180 grains on 1 square. The sanding paper with the indication P40 has therefore only 40 grains on 1 square. The bigger the number, the finer the sanding paper because there...
Timing belt wrench, arc wrench, tension wrench, v-belt wrench, bent wrench 10 pcs, tension wrench set, multi-tooth ring spanner, tensioner set (GERE-01925).Ergonomic with soft handle shaped ring spanners especially for e.g. hard to reach timing belts and r the long narrow holder and the 45° bend, these ring spanners are excellent for hard to reach places in the r operating the automatic tensioning device of V-belts and flat belts Also suitable for tensioning pulleys, belt tensioners of old of th...
Seatbelt alarm adapter, 1 piece, Alarm stopper (AUTM-01200). 1 pieceThis seatbelt connector is exclusively meant for deactivating the alarm in your car, if it is activated by an object in the seat. It may not be used on seats where people are transported.
C8mwzsnz0
V-belt pulley puller, Puller set 10-piece, V-belt pulley replacement (AUTM-02061).Pullers and crossbars can be combined with each other. For use on pulleys up to 200 mm For use on: Power steering pump - fan wheel - alternatorContents: 2x Cross beams: 140 mm long 230 mm long2x Straight pullers: 60 mm long 110 mm long1x Special shape pullers: 60 mm long
Bqnnr8b93d
Drill and sanding disc set, Drill set, 20 pieces (GERE-01681).Contents:4x Sanding belt holder : 1/2'', 3/4'', 1'' and 1-1/2'' 8x Sanding belt fine : 120 grit 8x Sanding belt coarse : 80 gritDrillingTrailer And Tools is your supplier of automotive tools and automotive parts. We have virtually everything in our range to make your workshop or garage complete. In addition, we guarantee our products and only make an offer where we are sure of the quality. Also you do not have to worry that you pay to...
Multitool (GERE-01298). A triangular adapter for sandpaper, two pieces of sandpaper, a steel scraper, a universal saw blade for wood, plastic and flexible metal. In addition, a screw with washer, an Allen key and, not inconveniently, an English manual! Sawing, sanding, polishing and grinding Can handle almost any material Saws even metal pipes and tiles Sands wood, concrete and masonry Removes easily joints, carpeting, vinyl and sealant edges We have a wide range of construction tools, which w...
Flap disc 125 mm, K-40 (GERE-01533) Diameter : 125 x 22 mm Maximum RPM : 12200 - 80m/s Grit : K-40 Brand : Hfftech Flap disc is a deburring disc type with small strips of sanding cloth on it, the blades. It combines what a grinding wheel and a sanding wheel are suitable for. Flap disc 125 mm, K-40 , Flap disc , Lamell disc , Sanding disc , Flap disc. A lamellar disc is a grinding disc made of lamellas with an abrasive. The disc is mostly used for finishing welding seams, but also for heavier san...
Flap disc 125 mm, K-80 (GERE-01535) Diameter : 125 x 22 mm Maximum RPM : 12200 - 80m/s Grit : K-80 Brand : Hfftech Flap disc is a deburring disc type with small strips of sanding cloth on it, the blades. It combines what a deflashing disc and an abrasive disc are suitable for. Flap disc 125 mm, K-80 , Flap disc , Sanding disc , Flap disc. A lamellar disc is a grinding disc made of lamellas with a sanding agent. The disc is mostly used for finishing welding seams, but also for heavier sanding wor...
Flap disc 125 mm, K-60 (GERE-01534). Diameter : 125 x 22 mm Maximum RPM: 12200 - 80m/s Grit : K-60 Brand : Hfftech Flap disc is a deburring disc type with small strips of sanding cloth on it, the combines therefore that which a deburring disc and sanding disc suitable for ell disc 125 mm, K-60 , Flap disc , Flap disc , Sanding disc , Lamellar disc is a grinding disc made of lamellas with a sanding disc is usually used for finishing especially welding seams, but also for heavier sanding is done w...
The twisted round brush for steel 100mm (GERE-01556) Twisted round steel brush for steel Diameter = 100 mm shaft thickness = 6.35 mm (1/4") Maximum speed = 11000 RPMBrushes / steel brushesTo make your workshop or garage complete and every possible job you take on to satisfaction, both in effectiveness and in the quality of the final result, you need ht offer of the best articles. Then at Trailer And Tools you are at the right place. We are your provider when it comes to automotive tools and auto...
Used machine
Condition: very good
Year of manufacture: 2003
-tolerance accurate calibrating with the contact roller
-sanding of solid wood 1st unit contact roller 2nd unit link pressure beam
-sanding of veneered workpieces with both sectional pressure beams
-intermediate varnish sanding with either one or two sanding units
Equipment and technical data:
constant working height
grinding width 1350 mm
workpiece thickness min./max. 3 - 150 mm
Operating terminal with 50 program memory locations
CPS ...
Working hours machine: 372 h
max. working width: 1350 mm
workable material thickness: 0,5-160 mm
number of aggregates: 4
Aggregate configuration: RPPB
Standard configuration
Blmblomat7
Extended machine accessories
Table dimensions 3000 x 1000 mm
throat 1000 mm
motor power 7,5 kw
sanding belt measurements 7800 x 150 mm
stroke of moving table 300 mm
working length 2600 mm
Gi0c9dpsm
Working width 150 mm
Length of sanding paper 7800 mm
Dust suction hood 180 mm
total power requirement 9,8 kW
6
6.000 €
Bidding plus VAT
23 days left
23 days left
control make: Siemens, type: Simatic Panel, max. grinding width: approx. 1500 mm
Guvc8yj
CATALOG NUMBER H0325
new machine, CE certificate
TECHNICAL DATA
- max grinding width 970mm
- max height of workpiece 304mm
- min. height of workpiece 7mm
- rotational speed of the grinding roller 1600U / min
- feed speed 1.8 - 9.1m / min
- sanding cylinder motor power 3.7kW (S1) / 5.2kW (S6)
- feed motor power 130W
- 230V or 400V voltage
- sanding roller diameter 155mm
Bgy2tady3s
- weight (net / gross) 355kg / 390kg
- machine dimensions 1143x711x1321mm
Net price: PLN 17 000
Net price: EUR 390...
Wide belt sander WEBER OFZ-2-1350
P89khvs
working width 1350 mm
number of aggregates 2
1. sizing roller with the engine with power 18,5 kw
2. aggregate with the viscera with the power 11 kw
brush with the power of 11 kw
sweeping brush
smooth regulation of feed speed
weight of the machine: 2700 kg
This may be of interest to you
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
