Dental Wings Dental Wing 3D Scanner DW-5-140
Year of manufacture 2008.
Serial no: DW-A-414
Accessories in a case please check the pictures, also the connection USB cables with the computer.
no USB key software is available, only the installation CD.
Lamp lighting is confirmed
Required PC connection • Detailed operation is uninspected because details are unknown
Power 100 W, Input 100—240V, 50-60 Hz
Condition: Power ON ok, but not tested. The scanner is new and has never used.
price Euro 1.30...
9
Catalog No. : 5648
Type: XOTM 60
Producer: UNIT
Made in: 2004
Tg7gapxj
Characteristic:
Minimum diameter of the pipe: 20 mm
Maximum diameter of the pipe: 60 mm
Machine length: 4900 mm
Machine weight: 130 kg
5
OPERATOR INTERFACE PANEL USED GOOD WORKING
Iei0zlz
PAY PAL
SENDING POST POLAND TO UE 30EURO
Satisfaction Guaranteed, sold with 14 days Warranty.
We accept paypal only
1
3HAC17396-1 ABB Serial measurement unit
Lgtqkzzj
5
UNIHOLZ modular hinge drilling unit
ECO STAR model
production year 2006
Fzzxdrx
0.75 kw engine, 2800 RPM
maximum drill bit diameter 40 mm
3 spindles
CE marking
400V power supply
base - table on wheels
Discover more used machines
3
Length: mm
B7wpfi7hhq
height: mm
power consumption: A
voltage: 220 - 240V V
connected load: 215 kW
total power requirement: 0,215 kw
weight of the machine approx.: 16 kg
dimensions of machine: 0,5 x 0,2 x 0,45 m
2
neu
ca. 8 Wochen ab Auftragse
Türkei
20200
377.74
0.4 - 4 mm
200 mm
200 x 3 mm
80 mm
100 m/Min
8 Nm
500 mm
500 mm
500 mm
Pixln
helical gear boxWATTDRIVE (Made in Austria)
FESTO pneumatic equipment
servo drive and control SIEMENS
7" colour touchscreen SIEMENS
4 gear rollers drive. Prevents the separation of the rollers during piloting operation for higher accuracy
Remote service module
EUCHNER hand wheel
BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH ...
6
Hydraulic power unit REXROTH
Year of manufacture approx. 1970
working pressure- nominal capacity: 50 bar
Operating pressure: max. 70 bar
volume flow: approx. 40 liters/min.
tank capacity: 240 liters
Engine power: 4 kW
Mains connection: 380 Volt, 50 Hz
- 1x electric hydraulic valve BOSCH
Na08xd
Space requirement Length: 1020 mm, Width: 610 mm Height: 1000 mm
Own weight: approx. 170 kg
4
offer consists of:
- punch unit HP-200A
Horizon HP-200A
punch unit
- features: press- and punch
Qdrpn
- numbers of holes: max. 4 holes; min. 2 holes
- punch hole position: max. 14mm; min. 9mm
- punch hole diameter: 6mm
- size:
max. 356x508mm;
min. 120x90mm
- punch thickness:
max. 4mm
- speed: max. 4000 Broschüren/h
- power: 230V / 50Hz - 0,68kW
- dimensions: 500x770x1035mm
- weight: 168kg
We can also organize the following for you:
packaging, loading, transport ( by ship or plane)...
6
- no description available -
Evleri73e
5
Switchgear, control, flame sensor, flame monitor, UV flame sensor, UV sensor, control device, burner control, automatic burner control
Brtvzmtud8
-Manufacturer: Landis & Gyr, burner control unit
-Type: LFE1
-Dimensions: 210/100/H1400 mm
-Weight: 1.8 kg
4
Length: mm
height: mm
power consumption: 40 - 500 A
welding current: V
total power requirement: 27,5 (kVA)
weight of the machine approx.: 120 kg
dimensions of machine: 1,0x0,53x1,5 m
Welding rectifier / inverter
MIG / MAG and electric welding
Supplied with transport rack
Type of current: direct current
TIG 10A / 10 V to 500A / 30V
Qag3f
E-welding: 12A / 20.5V to 500A / 40V
MIG / MAG: 40A / 12V to 500A/ 39V
Voltage U1: 380 - 415V
Cooling type F, water cooled
Protection class IP 23
2
material width 500 mm
material thickness - 4,0 mm
feed length 0,01 - 9999,99 mm
number of rolls 2
material cross-cut 1000 mm²
Power capacity 4,6 kW
Weight 0,5 t
Dimensions (WxDxH) 1,0 x 0,8 x 1,3 m
electronic roll feed
B2yioz2ox0
6
Electric screwdriver unit with automatic feed and pneumatic double stroke with touch screen operation
and screw feeding by vibration conveyor, sorting device, spiral conveyor, vibratory bowl for screwdriving technology
BÖLLHOFF Type Uniquick Vario + electric screwdriver unit REXROTH EC303 SZ3 + CS351S-G IL + PLC control Panasonic GT12 / FP0R
The system consists of the following components:
- Vibratory feeder BÖLLHOFF Uniquick Vario
- Electric screwdriver unit Böllhoff Uniquick Vario UVS-100-R-E ...
offer consists of:
Hohner stitching head
manual adjustment
Connectable to the following machines:
- AC 1200-4800
- HAC
- MC
Hwgvvc2eo
- AC 8000S/ 8300S
- MAC
- TAC
Technical Details:
- size: min. 148x115mm, max. 320x330mm
- thickness: min. 2 Blatt, max. 4mm
- cycles: max. 2350/h
- dimension: Breite 100cm, Tiefe 62cm, Höhe 85cm
- weight: 130kg
- power: 220-240V, 300W
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
5
- no description available -
Bzjkw32j30
5
Hydraulic filter, filter element, high pressure filter
-Manufacturer: Parker, high pressure filter with contamination indicator
-Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters
-Price/sale: only complete
2sx2eu
-Dimension: 500/250/H160 mm
-Weight: 20.8 kg
4
Length: mm
height: mm
power consumption: 350 A
welding current: V
total power requirement: 17,5 kVA
weight of the machine approx.: 55 kg
dimensions of machine: 0,64 x 0,31 x 0,46 m
Welding rectifier/inverter
MIG/ MAG:40A / 14V up to 350A / 31,5 V
B7wpemjwln
TIG: 10A / 10V up to 350 A
E-welding: 15A / 20,5V up to 350A / 34V
Voltage U1: 380 - 415V
Cooling type: F (water cooled)
Protection class: IP 23
6
Drilling unit, drill feed unit AIRTEC / SUGINO SELFEEDER / ROMAI
Drill head with multi-spindle drill head, drill feed unit
Drilling unit, drill feed unit AIRTEC / SUGINO SELFEEDER
Type: D4P-1330G
Year of manufacture: 2001
drilling capacity D4P max.: Ø 13,5 mm
Drilling capacity 1330G: Ø 6 mm in steel at speed 3.000 rpm.
Spindle speed: 3000 rpm.
Stroke path: max. 100 mm
spindle receptacle: B16
Shank adaption at the drilling spindle sleeve, e.g. for multi-spindle drilling head: Ø 50 mm
Outside diam...
6
offer consist of:
GUK fold unit
FA 52/4 Stat 2 HT
- roller condition: 0%
- rollers refurbished: 1.536€
- 4 buckles
- installation: height manually adjustable
2saelm
- usage: online and offline workable
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
5
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
-Milling unit: swiveling
-1x engines Perske
-Motor type:
Shnvkxjva
-Power: 0.75 kW
-Voltage: volts
-Frequency: 300 Hz
-Speed: 8,600...
6
Length: mm
height: mm
power consumption: A
welding current: V
total power requirement: 27,5 (kVA)
weight of the machine approx.: 120 kg
dimensions of machine: 1,0x0,53x1,5 m
Welding rectifier / inverter
Heh2xey9w
MIG / MAG and electric welding
Supplied with transport rack
Type of current: direct current
TIG 10A / 10 V to 500A / 30V
E-welding: 12A / 20.5V to 500A / 40V
MIG / MAG: 40A / 12V to 500A/ 39V
Voltage U1: 380 - 415V
Cooling type F, water cooled
Protection class IP 23
6
Drilling unit, drill feed unit AIRTEC / SUGINO SELFEEDER
Type: D4P-1330G
Year of manufacture: 2001
drilling capacity D4P max.: Ø 13,5 mm
Drilling capacity 1330G: Ø 6 mm in steel at speed 3.000 rpm.
Spindle speed: 3000 rpm.
Stroke path: max. 100 mm
spindle receptacle: B16
Shank adaption at the drilling spindle sleeve, e.g. for multi-spindle drilling head: Ø 50 mm
Bz2x78bmr7
Outside diameter of the clamping shank: Ø 92 mm
motor speed: 2855 rpm
Motor power: 0,75 kW
Mains connection: 400 Volt, 50 Hz...
1
offer consists of:
Horizon Stitching unit SP-1
Hohner stitching head
manual adjustment
- without stitching head
Technical Details:
- size: min. 148x115mm, max. 320x330mm
- thickness: min. 2 Blatt, max. 4mm
- cycles: max. 2350/h
- dimension: Breite 100cm, Tiefe 62cm, Höhe 85cm
- weight: 130kg
- power: 220-240V, 300W
Owq0z
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
5
Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame
-Transfer in current condition as seen
-1x: punching bracket as shown in the pictures
-Manufacturer: CEWE
-1x: type LWS 35-150
-Dimensions: 300/80/H220 mm
-Weight: 13 kg
Mnbnz
4
Length: mm
height: mm
power consumption: 40-500 A
welding current: V
total power requirement: 27,5 (kVA)
weight of the machine approx.: 93 kg
dimensions of machine: 0,75 x 0,4 x 0,6 m
Welding rectifier / inverter
MIG / MAG and electric welding
Supplied with transport rack
Type of current: direct current
TIG 10A / 10 V to 500A / 30V
E-welding: 12A / 20.5V to 500A / 40V
MIG / MAG: 40A / 12V to 500A/ 39V
Voltage U1: 380 - 415V
Bhw9esii
Cooling type F, water cooled
Protection class IP 23
5
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG unit carrier for milling units
-with heavy leadership
-laterally movable
Sfonowluz
-with counter
-Table height: 285 mm
-Table surface: 1210 x 295 mm
-Table thickness: 18 mm
-Dimens...
4
Length: mm
height: mm
power consumption: 350 A
total power requirement: 17,5 kVA
weight of the machine approx.: 60 kg
dimensions of machine: 0,64 x 0,31 x 0,46 m
dimensions:: Wagen: L:1,0 x B: 0,5 x H: 0,2 m
Welding rectifier/inverter with trolley
MIG/ MAG:40A / 14V up to 350A / 31,5 V
TIG: 10A / 10V up to 350 A
E-welding: 15A / 20,5V up to 350A / 34V
Voltage U1: 380 - 415V
Cooling type: F (water cooled)
Qag2h
Protection class: IP 23
5
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
-Milling unit: swiveling
-1x engines Perske
-Motor type:
-Power: 0.75 kW
-Voltage: volts
-Frequency: 300 Hz
-Speed: 8,600 rpm
Loir...
2
Length: mm
height: mm
power consumption: 40-500 A
welding current: V
total power requirement: 27,5 (kVA)
weight of the machine approx.: 120 kg
B7wpohaqao
dimensions of machine: 1,0x0,53x1,5 m
Welding rectifier / inverter
MIG / MAG and electric welding
Supplied with transport rack
Type of current: direct current
TIG 10A / 10 V to 500A / 30V
E-welding: 12A / 20.5V to 500A / 40V
MIG / MAG: 40A / 12V to 500A/ 39V
Voltage U1: 380 - 415V
Cooling type F, water cooled
Protection class IP 23
5
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
S0xbjp2us
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
-Milling unit: swiveling
-2x motors
-Motor type:
-Power: 0.23 kW
-Voltage: volts
-Frequency: Hz
-Speed: 18,000 rpm
-Other engines...
2
Length: mm
height: mm
power consumption: A
welding current: 200 V
total power requirement: kw
weight of the machine approx.: 40 kg
dimensions of machine: 0,8 x 0,4 x 0,8 m
Welding rectifier
MIG-MAG 30A / 15V to 200A / 24V
Voltage U1: 230/400V
Protection class IP 21
Yqweypt9
Cooling: air cooled
Equipment:
Welding gun with connection cable
Ground cable
5
Control device for electric forklift, electric motor, DC motor, traction motor, drive motor, motor control, motor controller, control, drive control
-Manufacturer: Jungheinrich, travel control
-Type: Mikropuls 1505 F
Btmskcxzet
-Dimensions: 210/170/H90 mm
-Weight: 2.1 kg
2
cooling capacity: kW
drive power: kW
voltage: V
Number of ventilators: 2 St.
max. temperature: zul. 320 Grad
pressure: zul. 10 bar
total power requirement: kw
weight of the machine ca.: auf Anfrage t
dimensions L x W x H: 2,9 x 1,9 x 2,3 m
mechanical filters
Dqc7mqsd
ventilator size Ø 800mm
flange connection Ø 220mm
equipped with security valve.
external commissioning.
5
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
Lqmcp
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
-Milling unit: swiveling
-2x motors
-Motor type:
-Power: 0.23 kW
-Voltage: volts
-Frequency: Hz
-Speed: 18,000 rpm
-Other en...
5
welding current: 400 A
power consumption: 25 kVA
current: bei 100% max.400 A
weight of the machine approx.: 302 kg
dimension machine xH: 1,2x0,6x1,2 m
Welding Rectifier
MIG MAG
- water-cooled, cooling type AF, protection type IP 22
- direct current
Equipment:
- with feed unit Kjellberg DTV 500
- without hose package, without pressure regulator, without ground cable, new
S8u2jl38x
Device has been tested.
5
High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay,
Control box, burner control
Qcqosqqn
-Manufacturer: Landis & Staefa, automatic burner control unit
-Type: LMG22.130A27
-Dimensions: 90/60/H60 mm
-Weight: 0.2 kg
3
Length: mm
height: mm
power consumption: A
capacity at 100% ED: 400 A
capacity: 60% ED = 500 A
welding current: Gleichstrom V
weight of the machine approx.: 230 kg
dimensions of machine: m
capacity: 21 kVA
Pbcff
Welding rectifier
MIG / MAG
Cooling type F
Protection class IP 23
insulation class F
incl. wire feed device, feed rate 0,5 - 20 m/min
Ground cable/pliers
Hose package 4 meters new
5
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG unit carrier for milling units
-with heavy leadership
-laterally movable
-with counter
Cs7vcfby
-Table height: 342 mm
-Table surface: 1715 x 225 mm
-Table thickness: 115 mm
-Dimens...
4
tank capacity: 100 l
overpressure : 250 bar
motor:
total power requirement: 7,5 kW
weight: 164 kg
dimensions L x W x H: 0,7 x 0,5 x 1,0 m
further technical details:
Bmgxghcoe7
- working pressure 160 MPa
- 1440 rpm (pump)
- hydr. connection 3/4"
