4
Cutting width: 434mm, compressed air supply: 220l/min, length: 1362mm, width: 809mm, height: 1205mm, weight: 220kg.
Etbsdqf
8
Abschwarter Maja BXA 554,
Belt warden with feed and discharge belt,
with new pressure wheels and discharge belt,
Ejnrny3d
Connection 400V, year of construction 2008,
Dimensions LxWxH approx. 125x113x122cm, weight approx. 383kg,
Machine in good used condition, fully functional
8
Derinding machines Weber ASB 600/2,
2 speeds, also open to use,
Connection 400V, dimensions LxWxH approx. 80x77x119cm,
weight approx. 215kg,
Qghft
good used condition, runs perfectly
8
Hang 115 G 3P Punching and eyeletting machine of the back eyelet
Producer: Hang Germany
Very good condition, after the review.
The machine is used for crimping eyelets on the back of a binder (Griffloch)
Yiiwxj3
Separate punching and eyelet tools punch holes and align eyelets with a single stroke in a fast, cam-driven sequence of movements
Easy to replace, automatic eyelet guide
Weight 340 kg
380V power supply
4
Type: TT-2100CMG
Description: Double-spindle parallel lathe with portal stacker. Automatic system for loading machined parts.
Qnkfl
Manufacturer: TAKISAWA Machine Tool
Year of production: 2017
Control system: Fanuc 31i
Distance from spindles: 340 mm
Turning diameter: 240 mm
Max. part length: 135.5 mm
Axis travel: X axis: 142 mm, Z axis: 165 mm
Axis feed rates: X axis: 24 m./min., Z axis: 24 m./min.
Number of spindles: 2 pieces
Chuck: three-jaw hydraulic 8 inch (blind) 2 x
Spindle speed: 4,500 rp...
5
• Carrying out folding operations of sheets with a maximum thickness of 1.5 mm and a maximum size of 8 m
• year of manufacture 2009
• weight 13000 kg
• hydraulic pressure 180 bar
• maximum thickness of the raw material 1.5mm
The machine is equipped as standard with safety equipment to prevent accidents during use:
B7tlbd8g
• emergency stop switch
• emergency stop cable along the machine
The machine is equipped as standard with a software system that has the following characteristics:
• manual ...
2
Perforating device
Mxd0fw
Creasing device
15
We manufacture industrial paint plants. We are happy to be a solution partner in case of need.
- Electrostatic Powder Coating Ovens (Box Type / U Type / Conveyor, etc.)
- Powder / Wet Paint Booths
- Washing and Drying Lines
Ccsah3kzl0
- 900 Degree Enamel Ovens
-Powder Coating Guns
-Powder Coating Booths
-Powder Coating Booth Filters
-Electrostatic Powder Coating
- Tailor-made Special Production Facilities
Note: Our furnaces are manufactured according to your demands, in desired dimensions, wit...
CAM-300 Automatic Sanitary napkin , surgical mask, paper napkin, napkin, paper, Sanitary Napkin, Mask, Towel, Wet Wipes , wet towel packing line Sanitary Napkin Packing Machine
Main Features
☆ Fully servo driven,Servo motor management by electronic CAM
☆ Modular structure design，Small floor area
☆ Force restrict protection, stable running
☆ Suitable for different direction packing
Main component configuration
★ Motion control system：MITSUBISHI/SIEMENS
★ pneumatic：SMC
★ Guide rail, screw rod ： ...
7
SEMIAUTOMATIC MACHINE FOR FIXING RADO AND FINGER HOLE EYELETS ON FILES OM 12/C
Producer: Industria Meccanica Lombarda srl Italy
Qsfnz
Very good condition, the machine is ready for production.
IML OM12 / C – semi-automatic machine for die cutting and crimping rado eyelets and ridge eyelets
Max format 750x390mm
Cardboard thickness 0.5-3mm
Weight 210 kg
Pneumatic power supply + 220V.
ALUMINUM AND PVC DOUBLE HEAD CUTTING MACHINE
OUR Q450 - Q500 - Q550 SAW MACHINES ARE AVAILABLE.
It complies with CE Standards.
2 Years Garantueed.
Saw movement with hydro-pneumatic hydrocheck control.
Cutting Accuracy +/- 0.1mm
*90 and *45 can be automatically adjusted to two inward angles.
*Automatic slicing at 90 angles.
10' color touch screen.
Possibility to connect remotely and provide technical support.
Ccqmr2nbgm
Servo motor motion system.
180mm saw exit distance and 80mm x2 profile cutti...
6
ROLLFORMING MACHINE
PRODUCING SQUARE PROFILES
WITH 5 TONES OF TOOLS
Bhxi3quk0n
MADE IN ITALY
8
Working paths
Cctqfz8wiv
X-axis (horizontal) 2,500 mm
Y-axis (horizontal) 1.000 mm
Z-axis (vertical) 1,000 mm
Working spindles
Drive power spindle (S1) 54 kW (SK-50)
Torque spindle (S1) 200 Nm (SK-50)
Max. Spindle speed 12.500 rpm (SK-50)
Work table
Table dimensions, W x L, 3,000 x 1,000 mm
Table load, max. 4,000 kg
B-axis
B-axis swivel range ± 120
Speed, max. 100 rpm
Swivel torque, max. 2,282 Nm
Clamping torque, max. 4,000 Nm
Rotary table (C-axis)
Table diameter, Ø 1,000 mm
Table load, max....
7
ORION AND SN
Automatic single-headed welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
7gejx2o
- Pneumatic work
- Seamless and standard welding
- One-button welding mode changeover
- Welding between 30˚ and 180˚
- Automatic process from start to finish
- Welding time control and digital temperature control
- Temperature control from 0˚ to 350˚ with electronic thermostat
- PLC control system
STANDARD EQUIPMEN...
4
TFON Leveltech®
Leveling And Residual Stress Relieve Machine
Model Names : L-9060 / L-9011 / L-9013 / L-9015 / L-9020
Material Thickness ( mm ) : 1,0 mm - 28,00 mm
Max. Material Width ( mm ) : 600 mm - 1100 mm - 1300 mm - 1500 mm - 2000 mm
Min. Material Lenght ( mm ) : 145 mm
Flattening Gap Adjustment : Servo Hydraulic / PLC Control
Overload Protection : Standard
Screen : Touch
CE-Certificate : Standard
Ibct2ygx8
Machine Weight ( KG ) ( Model Respectively ) :
26.000 KG - 31.000 KG - 35.000 KG...
7
L Bar Wrap Shrink Packaging Machine BSF-5540
Brand new device.
Description:
The main advantages of the cover shrink wrapping machines are, among others simultaneous welding and shrinking, small overall dimensions and easy movement. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They have the option of regulating the welding time and temperature of the heaters, as well as the possibility of shrinking PVC foil and polyolefin foil.
Technical parameters:
Po...
7
Ingersoll Hansen Center 300 EDM CNC Erodiermaschine
Hersteller [manufacturer]: Ingersoll Hansen
Typ [ type]: Center 300
Steuerung [control unit]: MultiPulse Control
Baujahr[construction year]: 1997
+ Inkl. Handheld
+ Inkl. EROWA Preset Comfort 3D-22 / Robot X system EDM dynamic tooling system (optional)
+ Inkl. EROWA 3-D Koordinatenmesssysem (optional)
Vollständige Dokumentation ist vorhanden.
Besichtigung unter Strom kann kurzfristig erfolgen.
Für weitere Fragen stehen wir Ihnen gerne zur...
11
ORION II SN
Automatic double head automatic welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
⦁ Pneumatic work
⦁ Automatic process from start to finish
⦁ Welding time adjustment, digital temperature control
⦁ Temperature control from 0º to 350º with electronic thermostat
⦁ Welding from 30° to 180° with single head
⦁ PLC control system
⦁ Easy Teflon replacement system
STANDARD EQUIPMENT:
⦁ Right and lewegp pr...
2
TFON Leveltech®
Leveling And Residual Stress Relieve Machine
Model Names : M-5560 / M-5511 / M-5513 / M-5515
Material Thickness ( mm ) : 1,0 mm - 15,00 mm
Max. Material Width ( mm ) : 600 mm - 1100 mm - 1300 mm - 1500 mm
Min. Material Lenght ( mm ) : 110 mm
Flattening Gap Adjustment : Servo Hydraulic / PLC Control
Overload Protection : Standard
Screen : Touch
CE-Certificate : Standard
Machine Weight ( KG ) ( Model Respectively ) :
12.000 KG - 15.000 KG - 18.000 KG - 22.000 KG
822kths
Machine...
5
Mini Pak’r Air Cushion Machine
Trw7aupr
The machine creates air-inflated fillings from the foil sleeve.
230V power supply
Weight about 6 kg.
4
GALAXY - III (PVC)
Milling copier with triple socket for drill bits (handle) and water drainage channel boreholes for PVC profiles
APPLICATION:
Ivpxmrgd
Used for cutting out handle sockets in aluminium and PVC profiles (openings, sockets for mounting locks, grips, hinges, opening channels etc.).
FUNCTIONS:
- Ease of use and operational safety through ergonomic design
- Possibility to open different channels independently of copy sets
- Copying sets
- Pneumatic clamps
- Triple drilling jack
- Pos...
2
TFON Leveltech®
Leveling And Residual Stress Relieve Machine
Model Names : S-3560 / S-3511 / S-3513
Qdhtp
Material Thickness ( mm ) : 0,3 mm - 5,0 mm
Max. Material Width ( mm ) : 600 mm - 1100 mm - 1300 mm
Min. Material Lenght ( mm ) : 70 mm
Flattening Gap Adjustment : Electromechanics / PLC Control
Overload Protection : Standard
Screen : Touch
CE-Certificate : Standard
Machine Weight ( KG ) ( Model Respectively ) :
5.000 KG - 10.000 KG - 14.000 KG
Machine Size ( mm ) ( Model Respectively ) ...
9
ALCOR II R
PVC cutting centre
Used for cutting, milling, punching and marking on 4 surfaces of PVC profiles.
Servo-controlled cutting
Servo controlled pivot axis
Automatic positioning in all degrees between 30° and 150° with servo drive
Robot with pneumatic handle and servo axis control and manual adjustment function for accurate profile positioning
Industrial PC with Windows-based touch screen and easy to use practical interface
Remote access Data transfer with remote control Network connection...
3
ORBIT IV SA
PLC-controlled semi-automatic machine for cleaning corners and PVC surfaces
APPLICATION:
It is used to clean the surplus resulting from the welding of PVC profiles
FUNCTIONS:
⦁ Cleaning the lower, upper and outer surface of the profile with two independent cleaning devices
⦁ Memory capacity for 250 profiles
⦁ Touchscreen control panel
⦁ Easy and quick entry of the program into the profile to be cleaned using Özçelik Makina's own software
⦁ Adjustable cleaning speed
⦁ PLC control syst...
3
SIRIUS automatic welding and cleaning centre (3 axes)
The centre is designed to weld and ring the four corners of PVC profiles
- minimum frame size 350x400mm - welding and cleaning
- maximum frame size 2540x4000m - welding and cleaning
- Welding and cleaning min size of the profile:
30mm height, 30mm width
- welding and cleaning maximum profile dimension:
200mm height, 150mm width
- welding seam thickness 0.2mm
- pneumatic operation
- automatic frame rotation
- large work programming memory
- s...
5
LEO R
Fully automatic, digital single-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Automatic operating system
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all stages between -22.5 °C and + 45 °C with servo motion system
- Batch processing and precision cutting
- Programming process and large memory
- remote access
- Data transfer via Ethernet and USB
- industrial PC wit...
4
Radial automatic single head saw LEO X with servo
As standard:
- 550mm target
- refrigeration system
- digital conveyor right 1pc
- automatic positioning of any angle between 30-90
degrees
- hydro-pneumatic cutting depth setting
- 3kW engine power
- cutting zone cover
- horizontal pneumatic clamps
- data transmission over the network, Ethernet, USB
- PC (IPC) HMI touch screen
Options for a surcharge:
- vertical pneumatic clamps
- chip extraction
- left-hand conveyor
Bhm0dpjn2c
- barcode printe...
10
Automatic single head saw, blade Ø 500 mm + conveyor K-3000 (length 3m) right hand side as standard
APPLICATION:
For cutting aluminum, plastics and wooden profiles
FEATURES:
Iwqqn3br
- Hydropneumatic cutting
- Safe cuts thanks to protective cover with safety sensor
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Possibility to cut at any intermediate angle between
- 67.5° to + 45°
- Speed regulation based on the type of profile to be cut
- Horizontal and vertical pneumatic cla...
2
Automatic single head saw METEOR I 600 (400V power supply)
disc Ø 600 mm, cooling system + conveyor K-3000 right in standard
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
- Safe cuts with automatic safety cover
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 67.5 °
- Speed control
- Horizontal (2pcs) and vertical (2pcs) pneumatic clamps
STANDARD EQUIPMENT:
- Shield Ø...
8
METEOR I 420
Automatic single-headed saw blade Ø 420 mm as standard with manual dimensional conveyor K-3000 (3m)
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
⦁ Hydropneumatic cutting
⦁ Safe cutting thanks to safety sensor cover
⦁ 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
⦁ Can be cut in any intermediate angle between - 45 ° to + 45 °
⦁ Speed adjustment depending on the profile to be cut
⦁ Horizontal (2pc) and vertical (2pc) pneumatic clamps
STANDARD EQUIPM...
7
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
J82pyb
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with pre...
7
DELTA III
Automatic slicing saw , blade Ø 450 mm, PLC control system
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
Dewfamxdy
- Shield 450mm
* minimum slice thickness 5mm
* maximum slice thickness at one time 750mm
- Safe cuts thanks to the cover with safety sensor
- Automatic terminal system
- Cutting speed control
- Digital adjustment of the blade extension according to the width of the cut profile
- Feeding of profiles with a system that prevents them from bei...
13
ALCOR I
THREE-AXIS CUTTING CENTRE CONTROLLED BY CNC
APPLICATION: For cutting aluminium, PVC and wood profiles, blade Ø 550 mm.
MAIN FEATURES:
- Precise cutting at any angle between 30° and 150°
- Up to 7 profiles can be loaded
- Waste treatment capacity of more than 800 mm for new production
- No waste cutting
- CNC control, touch screen
- Data transfer via remote network connection, Internet and USB
- Remote access
- Pneumatic maintenance system
- High processing capacity to increase efficiency...
6
GEMINI - II A
Semi-automatic, digital twin-head cutting-off machine, 2x blade Ø 400 mm, twin-cutting
APPLICATION:
For cutting aluminium, plastics and wooden profiles
MAIN FEATURES:
- Hydro-pneumatic cutting
- Safe cuts thanks to the fitting of a cover.
- Manual positioning at all stages between -45° and +45°
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles - quick manual adjustment
- Automatic positioning of cutting length
- PLC control system
- Possibility of storing dimensions
Iyjeni9p
...
6
GEMINI IV M - Two-headed manual saw for cutting aluminium, PVC and wood
As standard:
- 2x 450mm disc,
- the conveyor on the moving head on the right,
- the cooling system,
- horizontal clamps
- hydropneumatic cut,
- guards protecting the cutting area with sensor
security
- manual angle positioning in the range between 45-90
degrees
- horizontal clamps
- support profile
For a surcharge:
Vsyzsy
- conveyor on fixed head
- vertical clamps
- chip extraction
The price given is the net price.
12-mo...
6
GEMINI IV SA
Semi-automatic, digital twin-head cutting-off saw, 2 x blade Ø 450 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Manual positioning on all steps between 45° and 90°
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- PLC control system
Bhmgw9zmsa
- Cutting capacity of 4000mm and 6000mm profiles wi...
4
GEMINI V SA - disc extension up to 185mm
Semi-automatic twin-headed saw blade, blade:2 x Ø 550 mm
APPLICATION:
For cutting aluminium, plastics, wood
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- High-speed positioning in steps 22.5°, 45° to 90°
- Manual positioning of any intermediate angle within the available span range
- Precision cutting
- Maximum internal angle 90 degrees, maximum external angle -22.5 degrees
APPLICABILITY TO SELECT THE TYPE OF...
