Wedging and Coring Machine

PND OS12

Condition: used, Scanico Freezing Tunnel -Year of manufacture: 2017 -Freezing capacity: 50kW -External dimensions: 4100 x 3250 x 3200 mm -Belt width: 2 x 600 mm Dwjdpfx Aoxfivcjddof -Belt length: 4100 mm -Separate belt control possible -Refrigerant: R449A-freon -Maximum product height: 150 mm -Condition: Used in very good condition, ready to work -Technical documentation and manual available Refrigeration compressors system Bitzer -Type: S6F-30.2Y-40P (x4) -Volume: 101.4 m3/h (x4) -Cooling capacity for R404A: 165.6 kW at -25°C/40°C, 142.8 kW at -30°C/40°C, 101.2 kW at -40°C/40°C -Dimensions: 3150 x 1170 x 1920 mm -Condition: Used in very good condition, ready to work LUVE Condenser -Type: LMC6F 3542 V/H EC -Cooling capacity: 247.2 kW -Number of fans: 4 x 630 mm -Dimensions: 5400 x 1110 x 1250 mm -Condition: In very good condition, fans tested, under nitrogen pressure

Condition: ready for operation (used), functionality: fully functional, total height: 1,200 mm, total width: 580 mm, total length: 820 mm, input voltage: 230 V, The machine is designed for pitting plums, leaving the plums whole. Electrical connection: 230 V. Machine dimensions mm: 820 x 580 x h1200. Originally, the machine is equipped with 10 blades, but 2 blades were already lost when it was purchased, but this does not interfere with the operation process at all. Only the yield is slightly lower. Dsdjw H I Trepfx Addewf Productivity with 8 blades: 100 fruits / 1 minute Hole diameter: 30 mm. Machine weight: 100 kg.

Year of construction: 2017, condition: excellent (used), ABL fruit chunker in superb condition. Has been chunking fruits such as pineapple, melon and oranges. Bought new in 2017. We also have 2 x AP15 peelers available separately. Dedpfx Adenfvi Esdowf

Year of construction: 2013, condition: ready for operation (used), The Tona Rapid XL processes larger fruits and vegetables with a maximum diameter of 130 mm and a maximum height of 220 mm. It can be used to efficiently cut products such as pineapples, beets, oranges or eggplants/aubergines into slices, segments or cubes. The cutting machine is particularly suitable for fruit and vegetables that must remain in a certain alignment during the cutting process in order to ensure perfect cutting results.   Dodpfx Aewdpmuoddowf

Condition: ready for operation (used), Kronen dicer, type: UJ, serial number: 206, year of construction: 1995, 400 V, 3 Ph, 50 Hz, 0.9 kW, distance between knives: 10 mm, total dimensions: 650 mm x 650 mm x 1240 mm. Dedpfxeu Atmhe Addjwf

Condition: excellent (used), functionality: fully functional, WORKING MEASUREMENTS: Useful tape width: 55cm Number of spirals: 18 Spiral diameter: 4.20 m approx. Height of product entry: 1.20 m Height of product exit: 3.70 m Technical description: DRUM: It is the element in charge of transmitting the movement to the belt, it is built by stainless steel profiles welded to a base ring formed a kind of cage. Dwodpfewnzahsx Addef MAIN STRUCTURE: It is the part of the tunnel that supports the conveyor belt (through an auxiliary structure) and the drum (through the bearings). It is built with folded and welded stainless steel plate profiles. AUXILIARY STRUCTURE: It supports the belt in its movement. To avoid metal-to-metal contact, it is covered with a special high density polyethylene profile. DRUM SUPPORTS: The lower supports have two main functions: centering the drum and supporting its weight. In the upper part, other supports are placed whose mission is exclusively to collaborate in the centering of the drum. EVAPORATOR: A circular evaporator located at the bottom of the drum is used, which results in an important space saving and in a horizontal air circulation without dead spaces. FANS: Fans are placed at the top and at the bottom with the discharge directed towards the inside of the evaporator so that the air flows through the evaporator towards the product. The fans will be sized so that the air velocity, both through the evaporator and through the product, is adequate. TRACTION: Consists of an electric motor-reducer of adequate power, with previously calculated reduction ratio, so that the speed of the drum and therefore of the belt are suitable. SPEED VARIATION EQUIPMENT: This consists of a frequency variator that, by varying the power supply frequency to the preset electric motor drive (between 20 Hz. and 60 Hz.), modifies its speed and therefore the output speed of the reducer, which allows us an appropriate retention time in each case. CONTROL PANEL AND MANEUVERING BOARD: The control panel includes the electrical and maneuvering elements of the Tunnel. In its front panel there are the general maneuvering controls, as well as a synoptic of operation and with the indications of the safety and alarms indicated with a luminous signal. Inside are the control elements, frequency variator with potentiometer, electronic starters for fans and other equipment protection elements.

Year of construction: 2008, condition: used, ABL washer for floating product. Dwsdpfeu Rq Acox Addof

Condition: good (used), mileage: 611 km, color: orange, lifting height: 6,500 mm, Year of construction: 2006, operating hours: 4,225 h, Field of application: Construction CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information Boki Kiefer HY1251 with Palfinger PK 2700 A * 2006 * Diesel * 4225 working hours * 611 kilometers * 6.5 meters hook height * 5 meters horizontal range * Load moment 2.6 tons/m * 2370 kg own weight * equipped with tipper body Dwsdjwakzrepfx Addef * including crane book and other documents

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that must reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Continuous autoclaves: These are integrated within production lines. Containers enter the autoclave automatically and exit at the other end already sterilized. This enables much higher production volumes. Dodpfxjwxwzpe Addowf - FMC-JBT rotary cooker-coolers: These consist of two or more bodies in which each sterilization phase is carried out. Measurements: Module 1: 9 m x 2 m x 2.30 m. Module 2: 9 m x 1.55 m x 2.30 m. Module 3: 13 m x 2.10 m x 2.30 m.

Condition: used, mileage: 2,97,000 km, power: 316 kW (429.64 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, Year of construction: 2017, first registration: 03/2017, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), RENAULT C430 PLATFORM + CRANE + REMOTE CONTROL / 8x4 Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2017 ? MILAGE: 297 000 km EQUIPMENT: ? ABS ? ASR ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH CAPACITY: 13 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 200/363/143 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING CRANE: PALFINGER PK 26002 - EHD + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Dwodpfoxtb Duox Addjf * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 01265