Automation System

SCHÜCO ISOMAT 5

Year of construction: 2007, condition: good (used), SCHÜCO ISOMAT 5 polyamide joining machine on aluminum profiles Semi-new with tooling for different profiles Currently disassembled for transport The profile taping machine can be used to apply a protective tape on all profiles with two parallel surfaces. It is also possible to apply the tape on a third side, at right angles to the other two, in a single operation. Pedpfotq E Eijx Ab Iegw

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Pgsdemhhf Sopfx Ab Iew Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, The manufacturer Zambelli Metalltechnik GmbH & Co. KG is discontinuing support for all paternosters and storage lifts as of December 31, 2023. The company will no longer provide support or spare parts in the future. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits and support for these devices. Pgedpfxoiy Dw Hs Ab Isw Please feel free to contact us at any time.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) Psdpfx Abomhhype Iegw - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Pjdpfxeihvtgo Ab Ijgw

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm Pgodpfxjmhh Dhs Ab Iew - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Psdpfewtg Hwex Ab Iegw

Condition: repair required (used), Year of construction: 1984, operating hours: 6,646 h, functionality: fully functional, total width: 4,300 mm, total height: 6,030 mm, total length: 3,750 mm, GUTMANN Shot Blasting Machine type PH315 Hook-type shot blasting machine for workpieces up to 2100 mm in height, 900 mm in diameter, and a maximum weight of 500 kg. The machine requires an overhaul and has not been started since it was dismantled and transported from Germany. Technical documentation is available in German. The machine is disassembled and stored outdoors. No CE mark. Currently equipped with 3x 1TZ90011DA234FB4Z turbines from Motorenmaier, 11 kW/12.6 S1. Pjdpfx Aewtpxijb Iegw As spare parts: 3x TYP RF132S/20K from AGTOS, 7.5 kW (blades require repair). Tungsten plates for internal repairs of the shot blasting chamber are also included as spare parts. Total width with guides: 4300 mm Total height (assembled): 6030 mm Total length with guides: 3750 mm

Condition: used, machine/vehicle number: 38342, Year of construction: 1998, load capacity: 2,000 kg, lifting height: 5,130 mm, free lift: 1,740 mm, mast type: triplex, construction height: 2,330 mm, fork length: 1,100 mm, total length: 2,500 mm, drive type: Elektro, construction width: 1,850 mm, Four-way sideloader Chassis number: 38342 Load center: 550 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tires type: Vulkollan Front tires Size: 2-ply Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Rear tires Size: 4-ply Rear tires Condition: 80 - 100% Battery manufacturer: New with Aquamatic 72V 535-3 Battery year of construction: 2017 Battery condition: 80 - 100% Description: Travel drive 2x3.5kW, working hydraulics 1x6 kW, steering hydraulics 1x3kW Overall height extended 6130 mm Platform height 450 mm Frame cut-out 1300 mm Mast extension 1200 mm Fork positioner, Implement length over carrier 2900 mm Fork adjustment 355-2890 mm Fork tilt +/-3.5° Side guide rollers on request Pjdpfx Asu D R Eqsb Iogw Roof cover, Glazed cab front and rear

Condition: used, CIRCULAR SAW WITH AUTOFEED Pgjdpfxe Dv Rae Ab Isw Technical characteristics: DIAMETER DISK 380 mms Comments: MAGGOT in GERMANY