Mesh welder

Schlatter AG MG900

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, welding power (max.): 420 kVA, wire diameter (max.): 8 mm, type of input current: AC, mesh size: 25 mm, working length: 4,000 mm, wire diameter (min.): 2 mm, Machine Profile: Schlatter MG900 PG12 Ljdpfxjy D Huio Ap Ajhg The Schlatter MG900 is a high-performance, fully refurbished resistance welding line, specifically designed for the production of wire mesh panels. It can process wire diameters of up to 12 mm with a maximum mesh width of 1,250 mm and a length of up to 3,000 mm. The machine has undergone comprehensive modernization to ensure maximum efficiency and flexibility in production. Technical Specifications 1. Main Components: Longitudinal Wire Feeder LV - Upgraded to a high-precision servo axis. - Magazine feeders for wires up to 3,000 mm in length. MG12.4 Mesh Welding Machine - Fitted with 6 transformers. - Four (4) Schlatter welding presses, 5 kN each. - Machine upgraded to 12 welding presses. Cross Wire Feeder QFD34 - Allows double wire insertion for two different line wires. - Note: The second tier is not yet installed in the photos. Mesh Extraction MVL - Driven by MS2N servo motor with CtrlX by Bosch Rexroth. - Equipped with three Schlatter mesh grippers (expandable on request). Mesh Stacking Unit MS - Automatic stacking of mesh panels (travel distance 3,100 mm). Control and Power Cabinet - Siemens S7 TIA machine control system. - Rexroth CtrlX components for high-dynamic motion control. Longitudinal Wire Loader LFE - Not included, available on request. Special Features and Advantages: - Full Refurbishment: Machine has been completely overhauled and modernized, with warranty included. - Efficiency: Fully automated operations via mesh stacker and servo-driven longitudinal wire feeder. - Future-Proof: Equipped with the latest technologies and control components. Specification: - Mesh width (cross wire length): max. 1,250 mm / min. 200 mm - Mesh length, with manual loading: max. 3,200 mm / min. 300 mm - Maximum distance between outermost line wires: 1,200 mm - Longitudinal wire spacing: 25 – 150 mm - Cross wire spacing: min. 12.5 mm, infinitely programmable - Longitudinal wire diameter: 2.0 – 10.0 mm - Cross wire diameter: 2.0 – 8.0 mm - Maximum number of longitudinal wires: 24

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm Lhedpfxjd H Ur Ae Ap Aeg - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA Ledpjlf Iqnofx Ap Aohg - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Lhodpfxor Nfvme Ap Aog Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine - Heated stainless steel blades on top - Heated stainless steel blades on bottom Ledpfxsykp Dxo Ap Ajhg - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m - Set of support arms

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Lhedpfx Apsx Adbnj Aeg Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Year of construction: 2018, condition: like new (used), functionality: fully functional, A new system for treating wastewater or condensate. Stored in 2018 and unused. Can be connected and tested if necessary. Lhsdpswhlr Iofx Ap Aog

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Lhodpowp Ilysfx Ap Ajg Stack height max. (mm) - 500

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Ljdpouc Sifjfx Ap Ajhg Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: new, Year of construction: 2025, 3 axis welding rotary table Protec KT 10 000 HV Lhedpfsmk T Rbex Ap Asg with height adjustment Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 dimensions: height tilted min: 1050mm height tilted max: 2200mm height horizontal min: 1360mm diameter of the clamping disk 2000mm length 3250mm, width 1700mm speed from 0,05 to approx. 0,6 rpm.