Wood shredder

Schuster LL 600 PLLA

Year of construction: 2024, condition: new, ♻ Universal use (various wood, pallets with nails, chipboard boards, waste and scrap, veneer, MDF boards, cardboard boxes, plastics, textiles, tires, etc.). ✔ Power: 55/75/90/110 kW ✔ Shaft length: 1400 mm ✔ Shaft diameter: 315 mm ✔ Shaft RPM: adjustable ✔ Number of cutting knives: 60 Tjdpfen Nwxfex Ac Nef ✔ Granulation: 15-90 mm ✔ Capacity: up to 17 m3/h* ✔ Filling opening: 1400 x 1800 mm ✔ Dimensions L/W/H: 2,20/3,10/2,80 m ✔ Weight: 7000 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), ♻ The MONSTER is a hybrid machine with two shaft PRE-SHREDDER P150 TWIN (with two reduction gearboxes) combined with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets. ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder combined with pre-shredder, capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder with pre-shredder: ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* ✔ Material: Pallets ✔ Filling opening: 2072 x 1070 mm ✔ Weight: 4200 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW Tjdpfx Aetpwrmoc Njf ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: new, Technical Data: - Hopper opening: 1850 x 1250 mm - Hopper volume: approx. 3.0 m3 - Rotor diameter: 500 mm - Rotor length: 650 mm - Rotor speed: 80 rpm - PLC control - Motor–gearbox: 18.5 kW - Control cabinet (completely wired) incl. 5 m cable - Automatic star-delta start - Weight: 3600 kg - Performance depends on material Main applications and processable materials: Tjdpfxswb Sdqs Ac Nef - Recycling and volume reduction of non-ferrous metals - Recycling and volume reduction of wood waste - Recycling and volume reduction of plastics and foam / Styrofoam - Recycling and volume reduction of electric cables and coils - Recycling and volume reduction of plastic containers and composite materials

Condition: reconditioned (used), power: 30 kW (40.79 HP), hopper volume: 800 l, working width: 800 mm, Slow-speed shredder, 800 x 1000 mm hopper, 30 kW motor, hydraulic pusher, reversible knives Todpowzg Tasfx Ac Nsf

Condition: good (used), screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor, trough screw conveyor, trough screw conveyor -Conveyor screw: Conveyor length: approx. 3600 mm Tsdpfswna Dlox Ac Nef -Design: stable -Drive motor: KEB 0.75 kW -Speed: 24 rpm -Conveyor screw: Ø approx. 270 mm -Conveyor screw pitch: 260 mm -Inlet/Outlet: Ø 250 mm -Dimensions: see technical drawing in the photos -Transport dimensions: 4290/400/H590 mm -Weight: 400 kg

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Tedpfotqfhxjx Ac Nsf Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: excellent (used), Year of construction: 2017, Weima Wood Shredder - Walking Floor Shredder - Low-Noise and Slow-Running Top condition - only 150 operating hours - Type: WL 600 Shaft diameter (mm): 260 Knife length (mm): 600 Knife shaft speed (rpm): 80 - 125 Number of knives (pcs): 14 Max. granulate size (mm): 20/25 Opening (mm): 600 x 800 Extraction port diameter (mm): 160 Motor power (kW): 15 Voltage (V): 400 Working height (mm): 1645 L x W x H (mm): 1,805 x 1,118 x 1,645 Weight (kg): 1,100 Todpfoxiq Syox Ac Njf Location: ex-stock 54634 Bitburg - available immediately - Subject to prior sale

Condition: used, Year of construction: 2010, Heavy-duty shredder with large rotor Low operating hours Used, excellent condition, low usage Manufacturer: DHB-Maschinenbau Type 800 Year of manufacture: 2010 Operating hours: 2108 Machine number: 30123 CE type-approved Motor: 30 + 2.2 kW Slow-speed With hydraulic push floor Hopper opening: 800 mm x 1000/1300 mm / 1.25 m³ Cutting width: 800 mm Rotor size: 800 x 400 mm diameter Vibration dampers Number of blades: 46 concave pieces Screen hole size: 15/20 mm New price approx. €45,000 Extraction connection D 200 mm Required space approx. 2700 mm x 1600 mm x 1900 mm Weight approx. 3400 kg Total connected load approx. 32.5 kW Todjxddukopfx Ac Nef Storage location: 97447 Gerolzhofen, free loaded, unpacked Sold as seen, in current condition No warranty or guarantee

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Tjdpfx Aox Alpgjc Nsf Storage location: Supplier

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, volume flow: 9,400 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, Three fans are offered; the price is for one fan each. All three fans are identical in design. Tjdexcv Ndopfx Ac Nsf