CNC lathe

TAKISAWA, MADE IN JAPAN TC – 350M L5

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, Djdpswlhvwofx Akgokn chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] Dkodpfxeuha Ume Akgjn - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm Dksdpfx Asyz Dcfjkgon z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A 63 swivellable NC: ° table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - Swivel-Millinghead - Package for tropical climate

Condition: ready for operation (used), CNC lathe by CMZ, model TX66 Y2 Quattro, year 2012, with driven tools on both turrets, Y-axis. Dsdpfxoyk D Hus Akgskn

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,530 h, Control Unit Brand FANUC Model 31i-Model B Main Drive Number of axis 3 This 3-axis Star SR-20J N was manufactured in 2019. It's a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information. Dkedpfx Akex D I Axjgjn Application Types Turning

Condition: excellent (used), Year of construction: 2014, operating hours: 31,000 h, functionality: fully functional, CNC-swiss type automatic lathe brand: STAR type: SV-38R new in: 2014 equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, driven tools, 2x C-axis, Y2 axis, subspindle, high pressure pump, oil mist, backworking, chip conveyor, parts conveyor, fire extinguishing system, useable for short and long parts automatic bar loader FMB TURBO 5-55 Dkedpfeytq Ahox Akgjn

Condition: new, Year of construction: 2024, functionality: fully functional, Baty SM350 profile projector - Powerful inspection for demanding applications Dkodpfx Aksuyh Rpsgjn The Baty SM350 is a sophisticated profile projector with a 350 mm screen and a robust, precise working platform with a measuring range of 250 mm x 125 mm. It is ideal for precise optical inspections in environments where reliability and accuracy are paramount. XLS: A simple 2-axis digital display for X and Y measurements, ideal for basic applications. MX200: This model extends the functions to include geometric measurements, including the calculation of angles, radii and distances. It also enables the creation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This version includes optical edge detection and full reporting, including SPC diagrams and DXF overlays. The device is equipped with a 3-position lens turret that allows quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also offers advanced measurement functions such as edge detection and DXF overlays. These features make it the ideal solution for detailed inspections and demanding measurement tasks in the manufacturing industry

Condition: ready for operation (used), Year of construction: 2017, operating hours: 67 h, spindle motor power: 22,000 W, spindle speed (max.): 3,300 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 1,585 mm, overall weight: 16,600 kg, controller manufacturer: MAZATROL, number of axes: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features full 5-axis simultaneous machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine includes a robust tool magazine capacity of 72 positions and is equipped with both main and second spindles for enhanced capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX i-200 S turn-mill centre. Contact us for further details. • Operating time: Approx. 68 hours • Availability: Immediate • Key capabilities: • Full 5‑axis simultaneous machining • Main spindle + second spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and working range • Max swing: Ø658 mm • Swing over cross slide: Ø658 mm • Max machining diameter: Ø658 mm • Max machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (second spindle): Ø65 mm • Max support mass (main spindle): 650 kg • Max support mass (second spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor output: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blow system: Included • Additional configuration: Heavy‑duty HD1 spindle; removal of standard spindle cylinder and chuck • Second spindle (HD2) • Chuck size: 8" • Max speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor output: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Max speed: 12,000 rpm • Motor output: 24 kW • Cooling: Oil & air • Tool interface: HSK‑A63 (T63) Dkedpfoy Sltgex Akgen • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travels • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: Tool breakage detection in magazine; Overload detection • CNC functions and software • 5‑axis machining function package • Tool radius compensation for 5‑axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous tapping with milling spindle • Cooling and preparation • Through‑tool coolant: 7 MPa • Preparation for oil mist extraction system • Highlights • Practically new condition with only ~68 operating hours • Very rich factory configuration • Full 5‑axis simultaneous machining • Main and sub‑spindle configuration • 72‑tool CAPTO magazine • Production‑ready with significant savings vs. new Additional equipment • Chip and parts handling • Side chip conveyor – Consep type • Belt‑type parts conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder • Bar feeder interface kit • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70‑V‑I‑R‑FM • Year: 2018 • Other accessories • Machine mounting anchors • 3‑color machine status signal lamp Technical Specification Counter Spindle Yes Driven Tools No

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Dksdpfx Akowglnyjgen Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 630 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: MATRIX, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 25,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, This 5-axis Mazak Variaxis 630-5X T was manufactured in 2009, offering advanced capabilities for complex machining tasks. Ideal for precision engineering, this vertical machining center ensures reliable performance. Consider the opportunity to buy this Mazak Variaxis 630-5X T vertical machining center. Contact us for more information. Machine Benefits Dsdpjyallkofx Akgskn Technical Machine Benefits • Number of tools (atc magazine): 80 • High pressure through the spindle: 20 bar Extra Information Machine still under power Technical Specification Taper Size ISO 40