Second-hand machinery for sale (50)

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) Iedsxb U Txepfx Abcjap -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. Iajdsxftvajpfx Abcop -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: excellent (used), Marinus Machines V&G 400 Series, Through Feed End Matching Machine suitable for fixed or random lengths as needed Maximum working length up to 6m, Minimum working length: 500m/m Total Power: Appr: 32kw, Tooling included. Iaodeydii Iepfx Abcsp 400v 50hZ 20 pieces per minute possible depending on length. PLC Controls. Complete Safety Enclosure.

Condition: good (used), WEINIG HYDROMAT H-23 10 SPINDLE MACHINE WITH TILT BEAM Isdpfx Ajycvfmjbcjap SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 11 KW 3: LEFT 11 KW 4: RIGHT 11 KW 30° TILTABLE 5: LEFT 11 KW 6: TOP 11 KW 7: BOTTOM 11 KW 8: TOP 11 KW 9: BOTTOM 11 KW 10: UNIVERSAL 11 KW 360° TILTABLE 60 M/MIN+ ELECTRIC. FEED 14 x DRIVEN TOP FEED ROLLERS 7 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 7+9 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 7500 KGS DUSTHOODS: 10 x 140 MM DIAMETER

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm Iaodpfx Abjycuqnscsp

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. A3 Outfeed Drop leaf. Crossfeed belt conveyor. Scissors lift with pack chains. Iaedox Rblpopfx Abcop pack outfeed chains.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Iaodpfx Aox Rbkxsbcep Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Year of construction: 2000, condition: excellent (used), Weinig High-Mech A4 bundling system Bundle forming packaging unit possible to combine with other Weinig outfeed handling systems available from stock such as buffers and stackers. Consisting of 1. Weinig 815-300 high speed bundling unit 2. Weinig 812-200 outfeed roller conveyor with crossfeed 3. Control panel with Siemens S7-300 CPU Iedjq Rvrbepfx Abcoap

Condition: like new (used), functionality: fully functional, TAWI High-Frequency Vacuum Lifter Built for speed and precision in logistics, warehouses, and packaging lines. One-handed lifting system easily handles boxes, baggage, drums, and food-grade items. High frequency manual handling device for where speed is critical. Overhead rail system 11.5 x 3m, divisible in half, the rails can also be increased in width (330kg weight). Max load of overhead rail system is 60kg. 3 lifting heads included (50kg capacity). 1. Lifting plate = 160mm diameter round. Iaodpfxjxx Sv So Abcop 2. Lifting plate 240 x 360mm 3. Lifting plate 300 x 100mm

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. Isdjq Dzkuepfx Abcoap • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: new, Year of construction: 2025, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. Iajdpfx Aexhfycsbcop OF-100 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed.

Condition: excellent (used), Weinig Unistacker Paternoster stacker with additional handling equipment Iaodpfx Abjxbpgascop Offer includes 1. Weinig 820 right angle transfer conveyor. 2. Weinig (5 belt) sorting station feeding to paternoster stacker. 3. Weinig 811 Unistack Paternoster stacker with 3x stick magazines. Minimum length approximately 500mm. Maximum length 3100mm. Pack width 1200mm Pack height 1200mm Max. capacity 5 layers per minute 4. Weinig 802 scissors lift roller conveyor feeding to pack outfeed. 5. Weinig 812 powered roller conveyor outfeed. 6. Mosca pack strapping machine (not tested). 7. Weinig chain pack outfeed conveyor

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Iasdpfx Aswmw Nvebcjp Possible to offer tooling if needed.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Ijdswgbxzopfx Abcjap

Condition: excellent (used), Standard version Weinig 811 board stacker Length min.-max. 1800 - 6100 mm Width max. 250 mm Height max. 160 mm Outfeed of automatic stacker Stack cross section max. 1200 x 1200 mm Stack weight 5000 daN (5 to) Max. capacity 5 layers per minute Iasdpfexbpi Uox Abcep 4 elevator arms, 4 carrying arms and 4 lifting arms lnfeed height of automatic stacker in connection with elevator approx. 850 mm Beginning of stack above ground 600 mm Drive motor 7.5 kW (10 HP) Possible to offer 811 floor level stackers also for 6m boards with board stacked on scissors lift with roller conveyors

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Iaodpfjw Np Uusx Abcsp Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. Iedpfx Asth Taaobcjap 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Iaodpoq Dzi Tsfx Abcop Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), Year of construction: 2003, Weinig E1 moulder infeed. Max length 6m Minimum length 450mm 80m/min+ 5.5kW hydraulic unit Switchable continuous or stop start feeding as needed Possible to offer moulder also if needed A1 moulder outfeed. Iaodpfx Aswmcvbebcop Automatic deposit on a belt conveyors for manual stacking.

Condition: good (used), Weinig Hydromat H23 8 spindle Ijdjxgq Rwjpfx Abceap 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Mainly used in high-speed production lines (up to 180m/min) Maximum length 6.1m. Workpieces are dropped on anti-clockwise rotating rollers, thus creating a precise reference line. Ijdpfoxbpqrjx Abceap Transport conveyor belt between moulder and transfer system for separation of workpieces. - precise positioning of pieces in the following cross feeding system - low noise emission due to carful returning to reference line - automatic transfer to cross feeder, stacker or further processing unit. Possible to offer 2 arm right angle transfer units also if needed.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Iodpfxewgbw Rj Abcoap Possible to offer with additional Weinig bundling system if needed.

Condition: like new (used), Tool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Iodpfx Abjn I Sadoceap Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: like new (used), Through feed double end trimmer saws. 2x 3kW saw motors. Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar. Iaedpfx Abeif N Sxjcjp

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. A3 Outfeed Drop leaf. Iodpfx Absv R Utnjceap Crossfeed belt conveyor. Scissors lift with pack chains. pack outfeed chains.