Mitsching GmbH

Condition: used, operating hours: 29 h, Description: BOBCAT E27 Z 29 short-tail excavator, demonstration model, quick coupler 29, operating hours like new, TOP condition!! * First commissioning in 2026 * Standard equipment * TOPS/ROPS cabin with heater * 1,500 mm dozer blade * 300 mm rubber tracks * Long dipperstick * Heavy counterweight * Hydraulic bolt-on quick coupler LA with E27z2 cabin, with AUX5 * Automatic idle * LED work lights on the front and rear of the cabin * Floating function for the dozer blade * Adjustable double-acting auxiliary hydraulics with quick couplings * Battery disconnect switch * Pre-installation for hydraulic clamp * Control console lock * Hydraulic monitoring with shut-off * Foldable and ergonomic pedals * Warning tone when the fuel tank is full * Grease gun holder * Horn * Proportional auxiliary and swing hydraulics control via push button * Automatic safety belt * Suspension seat with high backrest * Two travel ranges with automatic transmission * Four mounting points on the upper carriage Technical specifications: * Diesel engine D1105-E4B-BCZ-1 (Kubota) * 15.3 kW at 2,400 rpm * Cooling: Water * Hydraulics: Total flow rate: 86.8 l/min * System relief pressure for auxiliary hydraulic circuits: 180 bar * Auxiliary hydraulic flow: 50.0 l/min * Digging depth with long dipperstick: 2,847 mm * Max. speed, low range: 2.5 km/h * Max. speed, high range: 4.3 km/h * Operating weight: approx. 2,700 kg (cabin + heater) Pgsdpjz Hd Dusfx Alwet * Quick coupler M503 with lifting hook * Swivel bucket, hydraulic, 1,200 mm * 2 years Bobcat manufacturer's warranty or 2,000 operating hours. Despite the greatest care, errors within the advertisement cannot be ruled out. We reserve the right to make changes and sell the item in the meantime!

Condition: used, mileage: 5,78,000 km, power: 355 kW (482.67 HP), first registration: 04/2020, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, DAF XF 480 SSC Standalone air conditioning, full fairing, Super Space Cab, retarder/intarder, auxiliary heating, well maintained service record, overall well-kept condition. Special Equipment: EURO 6 engine Automatic climate control Stationary air conditioning: i-Park Auxiliary heater Fuel tank: 620 liters Additional fuel tank: 430 liters, aluminum Roof air deflector Fog lights Wheelbase variant: 3800 mm Fifth wheel coupling Upper bunk bed Lower bunk bed Side fairings Cab seats: luxury driver's seat, air-suspended Skylights in high roof External sun visor Central locking with remote control Pedpfx Alsz Hd Dnswsgt Despite our best efforts, errors in this advertisement cannot be excluded. Subject to mistakes and prior sale!

Condition: used, axle configuration: 2 axles, first registration: 03/2025, next inspection (TÜV): 03/2027, loading space length: 3,320 mm, loading space width: 2,350 mm, loading space height: 600 mm, total width: 2,420 mm, total height: 410 mm, Year of construction: 2025, Vetter TRG 8120 / TRA 8120 Cable Drum Variable Trailer, 1 owner, low usage, not used on construction sites, as new condition. TRA 8120 tandem trailer for the Subduct Drum Frame TRG 8120: - Height-adjustable overrun drawbar with DIN towing eye and jockey wheel, including interchangeable ball hitch coupling. - 2 rear telescopic crank supports. - Floor made of phenolic resin-coated plywood with mounting points for securing the frame. - Ramp slot for inserting aluminum ramps. - No drop sides, no aluminum ramps included. - Trailer TÜV-certified. - Vehicle ID No.: WHC2PHTXXRN623360 Payload: 1200 kg Unladen weight (approx.): 800 kg Gross weight: 2000 kg Drawbar load: 100 kg Platform internal width: 2350 mm Trailer overall width: 2420 mm Platform internal length: 3320 mm Maximum trailer overall length: 5550 mm Loading height: 600 mm Coupling height: 410 mm Tyres: 4x 195/55 Additional equipment: aluminum side panels, 300 mm high, including APR Board hinges, for trailer TRA 8120. Optional extras: Aluminum ramps 2500x600x55 mm, APR Ramp. Surcharge for 2 aluminum ramps, each 2500x300x55 mm, coarse, for trailer TRA 8120. - Permissible load per ramp pair: axle spacing 2.0 m = 1400 kg; axle spacing 1.5 m = 1400 kg; axle spacing 1.0 m = 1220 kg; single axle = 900 kg Net purchase price: €696.00 + 19% VAT Podpoz Hd Dhofx Alwjgt TRG 8120, drum transport and 1 pay-off frame for up to 8 subduct drums on trailer TRA 8120 or on truck beds. The frame can also be placed on the ground at the worksite and the drums unwound. Drums from various manufacturers can be accommodated: - Up to 8 drums, diameter 1200 mm - Max. drum width: 440 mm - Max. payload: 2000 kg The frame is equipped with: - 2 lightweight aluminum drum axles - 6 spacers - 4 clamping collars for 2 shafts - 1 rear portal for deflection piping Advantages of the frame: - Usable on a range of vehicles - Can be placed directly on the ground - Fully disassemblable, bolted construction - Completely hot-dip galvanized and robust Technical data: Length: 2770 mm, Width: 2330 mm, Internal width: 2160 mm, Height: 770 mm, Weight approx. 277 kg Former net new price: €16,892 + 19% VAT Despite the utmost care, errors in this advertisement cannot be excluded. Errors and prior sale reserved!

Condition: used, maximum load weight: 24,490 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 02/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 3,990 mm, Year of construction: 2018, Equipment: ABS, Kögel Plane Mega Liner S 18 Edscha, hydraulic lift roof, color: white-black, 2-axle 2 axles Payload: 24,490 kg Tires: 445/45 R 19.5 SAF axles Edscha tarp Sliding tarp Hydraulic lift roof with a total lifting height of 500 mm Floor 30mm thick, waterproof plate floor, cut edges sealed all around, continuous, waterproof bonding between chassis and floor plate with a durable, high-performance adhesive. Strength according to EN283, for floor loads up to a maximum of 7,000 kg forklift axle load. Premium visible sealing Accessories: Steel corner posts at the rear outside as a trapezoidal box, Delta rubber corner profile at the rear across the rear frame, pallet stop on the side rail, left, welded, approx. 20mm high Pallet stop on the side rail, right, welded, approx. 20mm high Steel front wall, continuous, with sturdy corner reinforcements, front wall reinforced on the inside with a screen-printed plate Loading area: 13620 x 2480 x 3000 mm Podpfx Asz Hd Dbslwjgt Fifth wheel height unladen: 975 mm Multilock outer frame, universal cargo securing system every 100 mm Sliding step ladder at the rear Side marker lights in LED design 1 rear fog light 1 reversing light 10-year Krone manufacturer's warranty against rust-through Detailed construction description of the semi-trailer will be sent upon request. Tested cargo securing (EN 12642 XL)

Condition: used, Year of construction: 2024, operating hours: 49 h, Rampicar ROTAIR R70AE Tracked Dumper Tool Carrier, Year 2024, approx. 49 operating hours, as new Description: * Maximum undercarriage load capacity 800kg * Honda GX390 petrol engine with electric start * Mono joystick for drive control * Hydrostatic drive system * Separate drive motors for each side * Undercarriage with centrally mounted oscillating rollers Pedpfx Ajz Hd Awjlwsgt * Mechanical emergency brake * Tipping skip with self-loading shovel * 1 free hydraulic circuit with control lever * Various attachments can be fitted optionally; see Rotair manufacturer’s brochure (link) Despite our utmost care, errors in this listing cannot be completely excluded. Subject to errors and prior sale!

Condition: used, mileage: 7,88,700 km, power: 368 kW (500.34 HP), first registration: 06/2019, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania S500 with full body cladding, retarder, auxiliary air conditioning, Alcoa rims, roof bar with long-range spotlights, 4x2 semi-trailer tractor, Euro6d, S cab with 2 sleeping berths, 2 tanks (500L/500L), ACC adaptive cruise control, lane departure warning system, collision warning system, differential lock, leather seats, auxiliary air conditioning, auxiliary heater, seat climate control/seat heating, air suspension, load indicator, air horns, xenon headlights, Scania multimedia entertainment system, navigation system, Alcoa alloy rims, and more. Well-maintained with service records, Scania 6-year service assistance contract, first owner, in very good condition. Pgedjz Hd Aqepfx Alwst Despite our best efforts, errors within the advertisement cannot be ruled out. We reserve the right to correct errors and make sales subject to prior sale!

Condition: used, maximum load weight: 2,641 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2025, Year of construction: 2025, Henra MT 353517 Machinery Transporter for construction equipment, etc. – new New, immediately available from stock. Permissible gross weight 3500kg. Transport area 3500 x 1700mm. Standard features include: * Bolted tubular drawbar with 2 different heights for overrun brake installation * Recessed lashing hooks in V-grooves in the loading area * Very low loading floor for easy driving on and off Psdpfx Asz Hd Adolwegt * 115 cm long loading ramp with sturdy drive-on aid and adjustable spring system * Loading ramp equipped with a robust and practical rotary latch (prevents tailgate rattling) * Heavy-duty bucket holder, also serves as a spare wheel bracket * Integrated LED side marker lights in side rail * LED front lights and LED contour lights * Sealed front section with tubular frame * Heavy-duty 18 mm plywood/wooden floor with anti-slip surface * Wheels 185/60R12 * Approved for 100 km/h * Despite the utmost care, errors in this listing cannot be excluded. We reserve the right of prior sale and to make changes!

Condition: used, mileage: 97,400 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, F-MAX LUXURY LED lighting package, Intarder, auxiliary heater, parking heater, TPMS (tire pressure monitoring system), Alcoa aluminum rims, roof light package with chrome bar, HORN AIR chrome, full trim, fully equipped, first owner, 3-year manufacturer's warranty, very well-maintained condition. Further technical data: Engine displacement: 12740 cm³ Emissions class: Euro 6 Environmental badge: 4 (Green) Color: black Interior features: * Adaptive cruise control * Auxiliary air conditioning * Air conditioning * Navigation system * Retarder/Intarder * Parking heater Safety & Environment: * ABS * ESP * Particle filter Vehicle description: Vehicle specification: * Engine: 500 hp * Emission standard: Euro-6 * Transmission: 12-speed automatic ZF Traxon Axles and wheels: Wheelbase: 3,600 mm Front axle: * Tire size: 385/55R22.5 * Brakes: Disc brakes * Suspension: Parabolic leaf spring * Load capacity: 8,000 kg Rear axle: * Tire size: 315/70R22.5 * Brakes: Disc brakes * Suspension: Air suspension with 2 air springs * Load capacity: 11,500 kg * Fifth wheel height: 1100 mm Special equipment Luxury Pack: Exterior: * Roof light package with chrome bar * HORN AIR chrome * Electric tilting cab * LED low beam headlights * Side skirts * Aluminum wheels * 1 tank 600 l * 2 tank 450 l * Fifth wheel height: 1,100 mm Podpsz Hdz Tjfx Alwsgt * Fog lights * Sun visor on the cab * Roof spoiler * Side spoiler * Rain sensor * Automatic headlights Interior: * 8-inch cluster display * Multimedia system with 7.2-inch touchscreen * Truck-specific navigation system * Refrigerator * Electric cab tilting mechanism * Parking heater * Auxiliary air conditioning * Climate control * Double armrest on the passenger seat * 2nd bed + storage compartments Technical features: * Cruise control * ADAPTIVE CRUISE CONTROL with ZF INTARDER * LDWS (Lane Departure Warning System) lane keeping assist * AEBS (Advanced Emergency Braking System) emergency brake assist * EBS (Electronic Braking System) * ESP (Electronic Stabilization Program) * ASR (Anti-Slip Control) * ECO-Roll * Differential lock * Adaptive speed regulation * Max Cruise (Predictive Speed Control) * TPMS (Tire Pressure and Temperature Monitoring System) * ADR & smart tachograph * Truckconnect * Emergency brake assist HIGHLIGHTS & PACKAGES * ADPAB LUXURY PACK ENGINE, TRANSMISSION & CHASSIS * FD2AB Intarder LIGHT & VISIBILITY * FT22050 LED lighting TECHNOLOGY & SAFETY * FT22067 Auxiliary cooling incl. AGM battery 210 Ah * FT22042 Tire pressure monitoring system - (TPMS - Tyre Pressure & Temperature Monitoring System) Further features: * FT22069 CB radio antenna (antenna only) * FT_VA_BREIT Front axle 385/55, Rear axle 315/70 R22.5 * FT004 Warranty 3 (3 years from registration for the entire vehicle) * FTTANK Tank 600l right and 450l left * HORN AIR chrome * Roof light package with chrome bar * FT22019 Fifth wheel height 2 bellows air suspension (Catalog Height 1100mm) SAF 1.119, 1.147, C2AS, 315/70 R 22.5 Continental, 2.47, low rolling resistance Despite the utmost care, errors in the advertisement cannot be ruled out. We reserve the right to make changes and sell the vehicle subject to prior sale!

Condition: used, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 06/2022, Year of construction: 2022, Alga TAT B-180, 7.3m, ramps, 19 t permitted total weight, low loader trailer, low-bed trailer, 1st owner, well-maintained condition. Technical Description: Chassis/suspension/number of axles: ABS, EBS, loading area 7,300 mm, low-bed 6,300 mm, rear slope: 1,000 mm, aluminium drop sides 400 mm, foldable, removable, split in the middle (Kinnegrip), 8 lashing eyes per side, each with a pulling force of 2 t, 2 pairs of lashing boxes front and rear each with a pulling force of 10 t, height-adjustable drawbar / stepless +/- 150 mm, 50 mm towing eye, one-piece ramps approx. 2,500 mm x 500 mm fully retractable, 2 folding supports at the rear, EBS, ABS, "GIGANT" axle(s), drum brake system, leaf suspension. Former net list price: €32,700 Podpfez Hd D Iox Alwjgt Despite all due care, errors in the advertisement cannot be excluded. Subject to errors and prior sale!

Condition: used, first registration: 04/2025, Year of construction: 2025, Equipment: ABS, Kögel MEGA S24 MEGA, lift axle on the 1st axle, lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding curtain sides, sliding roof cover, toolbox, 1st owner, as new condition. Permissible kingpin load: 12,000 kg Technical possible kingpin load: approx. 12,000 kg Permissible axle load: 24,000 kg (8,000 kg per axle) Technical possible axle load: approx. 27,000 kg (9,000 kg per axle) Permissible total weight: 36,000 kg Technical possible total weight: approx. 39,000 kg Unladen weight, basic equipment: approx. 6,130 kg Unladen weight, individual configuration: approx. 6,582 kg Theoretical payload: approx. 29,418 kg Floor load capacity according to DIN EN 283 with test axle load 7,200 kg (A) Wheelbase: approx. 6,390 mm (A1) Axle spacing: approx. 1,310 mm (A2) Axle spacing: approx. 1,310 mm (D) Overall length: approx. 13,950 mm Pgjdpfx Alsz Hd D Uowjt (E) Overall width: approx. 2,550 mm (F) Internal loading length: approx. 13,620 mm (G) Internal loading width: approx. 2,480 mm (G2) Rear through-loading width: approx. 2,480 mm Tire size: 445/45R19.5 (H1) Loading height unladen, driving position level: approx. 1,020 mm (H2) Loading height laden, driving position level: approx. 990 mm (H3) Achievable dock height at rear with kingpin height 910 mm, loaded, raised: approx. 1,200 mm Ride height set to 265 mm. (K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm] (K1) Height under roof, internal: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm] (X1) Overall height unladen, driving position level: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment (X2) Overall height laden, driving position level: = H2 + K + T +/- body height adjustment Superstructure settings: The “Mega” superstructure design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, lateral through-loading height, internal height) change accordingly depending on the selected body setting. (T) Roof construction height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-width height corresponds to the specified internal height under the roof. (N) Front overhang (according to ISO 1726): approx. 1,685 mm (N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm (O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm (P) Construction height above king pin: approx. 90 mm (S) Possible kingpin height unladen: approx. 930 - 1,060 mm, horizontal at approx. 930 mm (Pay attention to overall height!) Braking system in accordance with ECE-R13 Electrical system in accordance with ECE-R48 Wabco brakes, air suspension BPW triple-axle assembly ECO Air with disc brakes Ø 370 mm, ET 120, 260 mm air suspension stroke. 6 x 445/45 R 19.5 tires Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in the direction of travel Vario Fix steel-perforated outer frame with 3 pairs of stanchion sockets Mechanical/hydraulic lift mechanism, lift height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!) Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only. "Daimler load securing DL 9.5" certificate

Condition: used, mileage: 14,58,555 km, power: 331 kW (450.03 HP), first registration: 06/2016, fuel type: diesel, overall weight: 44,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania R450 MEGA, full cab, auxiliary climate control, completely overhauled engine at 790,000 km * Full cab * Partial leather upholstery * Seat ventilation * Camera, monitor * Power: 331 kW / 450 hp * Engine displacement: 12,742 cc * EURO 6 * Retarder * ABS * ASR * ESP * Differential lock, rear axle * Neb * Exterior mirrors and wide-angle mirrors, electrically adjustable and heated * Distance control cruise control with emergency braking assist * Lane keeping assist * Storage compartment above driver / center / passenger * Air horns on the roof of the cab * Suspension: leaf spring suspension, front axle; air suspension, rear axle Pjdpfxsz Hd Efs Alwogt * Auxiliary climate control * 2x comfortable sleeper berth * Auxiliary heater * Extendable refrigerator under the berth * Air-sprung comfort seat, driver * Seat heating * CD radio / AUX / USB / Bluetooth * Navigation system * Multifunction steering wheel * Sun visor, exterior, transparent * Fog lights * Electric windows * Automatic climate control * Additional headlights on the cab * 2 XL fuel tanks Tires: Front axle: 355 / 50 R22.5 Rear axle: 295 / 60 R22.5 Despite the utmost care, errors within the advertisement cannot be ruled out. We reserve the right to make changes and to sell the vehicle in the meantime!

Condition: used, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 11/2023, loading space length: 3,660 mm, loading space width: 1,700 mm, loading space height: 2,100 mm, total length: 5,450 mm, total width: 2,550 mm, total height: 2,600 mm, Year of construction: 2023, Unsinn UKAG 3617-35-21 box trailer, lowerable, with ramp, new TÜV (technical inspection), first owner, like new. Technical specifications of the trailer: * Dimensions & Weights: Internal length: 3,660 mm | Internal width: 1,700 mm | Loading height: 490 mm | Permissible total weight: 3,500 kg * Wheels: Tire size 185 R14C 8PR | Wheel size: 14 inches | Rim type: Steel rim | Number of axles: 2 * Chassis: Chassis made of sturdy steel frame (welded and hot-dip galvanized), overrun device with ball coupling, automatic jockey wheel with steel rim and solid rubber tire (load capacity 500 kg). * Loading area: Made of 18 mm phenolic resin plywood, non-slip and waterproof. * Body: * Walls made of insulating panels (steel sandwich). * Exterior in silver (RAL 9006), interior in white (RAL 9010). * Wall thickness: 45 mm | Edge profiles made of aluminum | Internal height: 2,100 mm. * Rear door double-leaf with stainless steel rotary latch and stainless steel door latches. * Passage dimensions (W x H): 1690 x 2099 mm. * Ramp made of aluminum with transport brackets on the inside of the left rear door (load capacity 2,000 kg). * 2 maneuvering handles mounted on the front wall profile. * Additional door with aluminum frame (standard size, on the side on the right in the direction of travel at the front, door hinged on the right). * Loading and securing: 10 recessed lashing points in the floor panel (divided on the left and right on the outside). * Hydraulics: Electro-hydraulics mounted in the container (with battery and charger, without hand pump) and charging cable for electro-hydraulics to the towing vehicle. * Other: Plastic tool box with lock (internal dimensions L/W/H: 590 x 265 x 320 mm) mounted on the box wall. Pjdpfez Hd Hpsx Alwsgt Former net new price: 21,700,- € Despite the greatest care, errors within the advertisement cannot be ruled out. We reserve the right to make changes and sell the item subject to prior sale!

Condition: used, mileage: 2,49,000 km, power: 205 kW (278.72 HP), first registration: 06/2004, fuel type: diesel, overall weight: 24,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: blue, gearing type: automatic, emission class: euro5, total width: 2,500 mm, total height: 3,430 mm, Year of construction: 2004, Equipment: all wheel drive, crane, Grove GMK 2035, year of manufacture 2004, excellently maintained, 48 meters: 29-meter main boom, 19-meter fly-jib, with new UVV (safety inspection) and new TÜV (roadworthiness certification). For sale is a meticulously maintained Grove GMK 2035, German machine, 2nd owner, complete service history, exceptionally well-kept and reliable condition, professionally operated and fully serviced. Technical Highlights & Equipment: - Grove GMK 2035, year 2004 - Operating hours: approx. 21,400 h - Original 48-meter ship fly-jib - Twin hydraulic folding jib, backlash-free - Telescopic main boom: up to 29 m - 4x4 all-terrain chassis - Mercedes drive unit (robust, reliable) Recent maintenance: Pedjz Hd Hijpfx Alwsgt - Complete winch service: brand new (cost €14,800, documentation available) - One of the key components of the GMK 2035, completely overhauled and tested - New UVV, all safety-relevant inspections freshly performed - New TÜV, vehicle and crane inspection fully renewed - Well-maintained, seamless history with full documentation - No pending repairs - Mechanics, hydraulics, boom, and electrics in excellent condition Documentation: - All inspection reports readily available - Load charts for main boom and fly-jib - Winch documentation and €14,000 invoice - Complete German service history - Operator’s manual and service booklet Technical condition: - Hydraulics: tight, clean, powerful - Boom: in excellent condition, no play - Visual: tidy and clean - Immediately operational, no further investment required Despite utmost care, errors in this listing cannot be excluded. We reserve the right for mistakes and prior sale.

Condition: used, maximum load weight: 32,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, Vehicle Description: Kögel S24-1 Cargo, Lifting Axle, BPW ECO Axles Air Compact, Edscha sliding roof, side curtains, mounted on both sides: Steel pallet stop strips with VarioFix hole pattern (bolted), VarioFix slotted frame, on both left and right sides in the direction of travel, for internal width 2,468 mm (loading height under outer rail is reduced by approx. 20 mm). Axle lift mechanism on axle 1, fully automatic, load-dependent axle lift control. Start assist: activation by pressing the brakes three times, 30% overload allowed up to a speed of 25 km/h. Plastic toolboxes EBS system 2S/2M with stability control program (includes ABS/ALB function). IDEM Telematics System BasicTrailer incl. GPS location monitoring, coupling status, EBS data. - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". Technical Data: Permissible total weight: approx. 39,000 kg Basic equipment unladen weight: approx. 5,920 kg Unladen weight of customized vehicle configuration: approx. 6,333 kg Bed length (internal): approx. 13,620 mm Bed width (internal): approx. 2,480 mm Rear through-loading width: approx. 2,480 mm Loading height unladen, level travel position: approx. 1,220 mm Loading height laden, level travel position: approx. 1,190 mm Vehicle height set at 290 mm Side through-loading height (internal): approx. 2,680 mm Height under roof (internal): approx. 2,760 mm Front overhang (ISO 1726): approx. 1,685 mm Front overhang radius (ISO 1726): approx. 2,040 mm Rear swing radius (contrary to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Chassis: Axle lift mechanism on axle 1, fully automatic and load-dependent. Start assist via triple brake actuation, 30% overload up to 25 km/h. BPW ECO Axles Air Compact assembly with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm lift. Tyres: 6 x 385/65 R 22.5 tyres, 160J (European brand of Kögel's choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Tarp: Tarp rope with two holders on the front wall Sliding tarp, quality approx. 900g/m², with over-center tensioning system, according to DAIMLER cargo securing standard (DL 9.5). Psdpsz Hd Hcsfx Alwogt Documents: - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,330 kg Max payload: 32,670 kg Axle configuration: 3 Wheelbase: 6,390 mm Loading length: 13,620 mm Loading width: 2,480 mm Loading height: 2,710 mm First registration: 03/2019 Suspension: Air Color: Silver Tire size: 385/65R22.5 Features: ABS, EBS, Telematics A complete equipment list is available on request. Despite utmost care, errors in this advert cannot be excluded. Subject to prior sale and errors. Please request more information.

Condition: used, mileage: 13,20,055 km, power: 331 kW (450.03 HP), first registration: 09/2016, fuel type: diesel, overall weight: 44,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania R450, full cab, auxiliary climate control, completely overhauled engine at 790,000 km * Full cab * Seat ventilation * Camera, monitor * Power: 331 kW / 450 hp * Displacement: 12,742 cc * EURO 6 * Retarder * ABS * ASR * ESP * Differential lock, rear axle * Neb * Exterior mirrors and wide-angle mirrors, electrically adjustable and heated * Adaptive cruise control with emergency braking assist * Lane keeping assist * Storage compartment above driver / center / passenger * Air horns on the cab roof * Suspension: front axle leaf spring, rear axle air suspension * Auxiliary climate control * 2x comfort sleeper berth * Auxiliary heater * Pull-out refrigerator compartment under the berth * Air-suspended comfort driver's seat * Seat heating Pedoz Hd E Sopfx Alwsgt * CD radio / AUX / USB / Bluetooth * Navigation system * Multifunction steering wheel * External sun visor, transparent * Fog lights * Power windows * Automatic climate control * Auxiliary headlights on the cab * 2 XL fuel tanks Despite our best efforts, errors in this advertisement cannot be ruled out. We reserve the right to make changes and corrections, and to sell the vehicle prior to confirmation.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2018, total width: 2,550 mm, total height: 980 mm, Equipment: ABS, Krone ZZB18eLZ Dolly, Mega or standard axle, actively steered axle, SAF axles, 23,000 km, large Wabco Trailer Smart Board, first owner, like new. Technical description: Frame as a double T-longitudinal beam with welded cross members, fifth wheel coupling, mounted on a turntable, overall height approx. 185 mm, underrun protection according to EC regulations. Drawbar for steered axle with bolted 50mm or 57.5mm drawbar eye, length when coupled low 4,150 mm, extendable by 4x100 mm, length when coupled high 3,500 mm, extendable by 3x100 mm (center of drawbar eye to center of fifth wheel plate). Front support with crank and gear. Actively steered dolly axle, low maintenance with disc brakes (430mm), offset 120, air suspension with lifting and lowering device, 1 valve, center hole centering. Pedpfez Hd A Dox Alwegt Tires: 4, size 445/45 R 19.5, manufacturer according to Krone's choice. Wheel covers according to EC directives 78/549/EEC and 91/226 EEC with corresponding splash protection device, black plastic mud flaps as quarter panels with upper tarpaulin cover, at the rear with mud flaps. Braking system according to ECE-R13, including vehicle stabilization function, spring brake parking brake, EBS system, 2S/2M, 2 sensors on one axle, diagnostics via ISO7638 connector (EBS supply cable), Palm coupling connections, brake connections for trailer on a strip in the frame. Lighting and signaling system according to ECE-R48, two 7-pole sockets DIN1185/3731, license plate, outline and side marker lights in LED design, multi-function tail lights including 1 rear fog light and 1 reversing light, electrical connections for trailer on a strip in the frame, connection cable for electrical and air connections (trailer). Steel parts shot-blasted, KTL-primed and powder-coated, standard paint finish (single-color), underrun protection and lighting carrier powder-coated in white, axles including wheel hubs in RAL 9005, components in black or galvanized, rims in silver, contour marking according to ECE-R48. Despite the greatest care, errors in the advertisement cannot be ruled out. Errors and prior sale are reserved!

Condition: used, maximum load weight: 2,840 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 10/2023, Year of construction: 2023, Baos M353616 Full-Aluminum Construction Machinery Trailer / Machinery Transporter Car Trailer 3,500 kg Condition: as new (Year of manufacture: 2023) Demonstration unit TÜV inspection: new Immediately available Technical specifications: Permissible total weight: 3,500 kg Unladen weight: approx. 660 kg Payload: approx. 2,840 kg Number of axles: 2 Loading area length: 3,550 mm Loading area width: 1,650 mm Brake type: braked, overrun brake Chassis: low-loader (wheels next to body), rubber torsion axles Electrics: 12V, 13-pin connector Tire size: 195 R14C Pgedpfx Aez Hd E Eslwot Equipment: Heavy-duty automatic jockey wheel with strut Bucket holder Phenolic resin coated anti-slip floor plate 2x lashing points 2000 daN at the rear of the loading area 8x floor anchors 800 daN mounted laterally in the loading area 4x aluminum tie-down rings on the outer frame Automatic jockey wheel Foldable aluminum loading ramps incl. support stands Aluminum plug-in panel between aluminum loading ramps Aluminum mudguards Welded frame V-drawbar AL-KO or Knott axles and brake system 100 km/h speed approval Despite the utmost care, errors in this advertisement cannot be excluded. Subject to prior sale and errors!

Condition: used, mileage: 2,87,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: Podpfxjz Hd Exe Alwsgt * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Condition: used, maximum load weight: 2,860 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 12/2022, total width: 2,320 mm, Year of construction: 2022, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional car transport. Fitzel Algema Eder Euro-Trans 35-22/53X tarpaulin trailer, pendulum axle, 100 km/h approval, single owner, used twice, no signs of wear, as new condition. Gross weight 3,500 kg, Tare weight approx. 640 kg (including special equipment), payload 2,860 kg X-Line pendulum axles for 100 km/h approval Podpfxoz Hd Ers Alwsgt Lift axle preparation Tyres: 195/50 R13C 104N M+S on alloy rims Loading dimensions: 5,300 x 2,180 mm, loading height 660 mm Overall dimensions: 6,620 x 2,220 mm, approach angle approx. 7.5° Standard equipment: • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable due to center-of-gravity shift with descent and tilt damper • 2 extractable and infinitely laterally adjustable ALU loading ramps, centrally lockable, operable from both sides, lockable • 2 rubber buffers per loading ramp for safe locking when retracted • Lashing straps, attachable on both sides at over 50 lashing points, for legally required load securing • 1 certified load securing according to TÜV certificate no. LS1206430Z1 • 1x 13-pin plug connection cable, 1 metre long, 12 volts • 8 large rear lights incl. 2 reverse lights and 2 rear fog lights • 2 rear outline marker lights, 4 orange side marker lights and 2 white front position lights - for your safety • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support wheel at the front allows for easy single-axle maneuvering with rubber-sprung axle • Reflective side stripes for your safety - F-band • 2 rear rolling supports • 2 driving tracks (550 mm wide, roughened) for safe, slip-free loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers required for 100 km/h approval Included special equipment: • Aluminum floor plate • High tarpaulin 5.30 x 2.30 x 2.00 m (internal loading dimensions LxWxH) - Complete aluminum frame with 2 support wheels, rollable as a unit - Front chamfered 600 x 600 mm - Incl. truck-grade tarpaulin, color black - Roll-up by hand on all 4 sides - Auxiliary loading mirror fitted front left - Winch clamp holder at the front right of the tarpaulin frame (tarpaulin height customizable) • Tarpaulin color: RAL black • High rear tailgate for tarpaulin • Right-hand side flap • Sliding curtain left and right Empty weight incl. special equipment only approx. 640 kg = 2,860 kg payload! - New list price according to equipment: €31,050 net plus €190 COC paper/document - Despite our best efforts, errors within the advertisement cannot be excluded. Subject to errors and prior sale!

Condition: used, Year of construction: 2023, operating hours: 39 h, Putzmeister SP 25 DQR Mortar Machine and more, 39 operating hours, like new!! SP 25 DQR: High performance for versatile applications. In addition to classic interior and exterior plastering applications, the powerful SP 25 DQR screw pump with forced mixer is suitable for a variety of other special applications, such as concrete repairs or filling and grouting work. The focus of the increased performance is on larger processing volumes, as well as higher delivery rates and pressures. Multi-component materials and ready-mix dry mortars can be mixed on site in the powerful forced mixer with any desired mixing time. The lifting function of the mixer enables a low filling height and allows the easy transfer of the mixed batch into the feed hopper. Main features: * Robust design - proven in construction site use and on the test track * Large lifting mixer with a volume of 240 liters allows the mixing of larger quantities of material/containers * Lower filling height simplifies filling and cleaning of the mixer * Central control panel with intuitive keypad and clear display * Larger tank for maximum operating time without refueling * Support feet for the best stability on the construction site * Robust plastic hood according to the highest quality standard * Safe relocation of the machine with a crane - thanks to the integrated crane eye Description: High performance for versatile applications. In addition to classic interior and exterior plastering applications, the powerful screw pump with forced mixer is suitable for a variety of other special applications, such as concrete repairs or filling and grouting work. The focus of the increased performance is on larger processing volumes, as well as higher delivery rates and pressures. Multi-component materials and ready-mix dry mortars can be mixed on site in the powerful forced mixer with any desired mixing time. The lifting function of the mixer enables a low filling height and allows the easy transfer of the mixed batch into the feed hopper. Robust plastic hood according to the highest quality standard. Central control panel with intuitive keypad and clear display. Robust design - proven in construction site use and on the test track. Support feet for the best stability on the construction site. Safe relocation of the machine with a crane - thanks to the integrated crane eye. Large lifting mixer with a volume of 240 liters allows the mixing of larger quantities of material/containers. Lower filling height simplifies filling and cleaning of the mixer. Larger tank for maximum operating time without refueling. Pedpfx Ajz Hd Eljlwjgt Technology with screw Fluid for mortar. Operation: Diesel-powered. Installation: Mobile. Application area: Industry. Application: Mixing. Protection level: Robust. Other features: Tank, construction site. Throughput: Max: 4.5 m³/h. Min: 0.3 m³/h. Pressure: 35 bar. Delivery height: 50 m, 70 m. Power: 28 kW. Length: 4,280 mm. Width: 1,410 mm. Height: 1,480 mm. Weight: 1,050 kg. Despite the greatest care, errors within the advertisement cannot be ruled out. We reserve the right to make changes and sell the item prior to sale!

Condition: used, mileage: 7,31,778 km, power: 353 kW (479.95 HP), first registration: 11/2017, axle configuration: 4x2, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Front axle: Steerable Rear axle: Double-tired Unladen weight: 7,912 kg Payload: 11,088 kg GVWR: 19,000 kg Damage: None Podpfxoz Hdy As Alwegt

Condition: good (used), mileage: 10,29,185 km, power: 338 kW (459.55 HP), first registration: 07/2015, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: AdBlue, EBS, airbag, electric window regulation, fridge, parking heater, power mirror, retarder, second fuel tank, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering Podpez Hdyiofx Alwjgt Rear axle 1: Double wheels Rear axle 2: Lift axle Weights Empty weight: 10.034 kg Carrying capacity: 15.963 kg GVW: 26.000 kg Maintenance, history and condition APK (MOT): tested until 03/2027 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Intarder - Radio/cassette player - Radio/Cd/Audio system - Radio/CD player - Sleeper cab - Speed limiter - stand airco - Vehicle heater - Visor

Condition: used, Year of construction: 2010, operating hours: 904 h, load capacity: 272 kg, empty load weight: 1,251 kg, fuel type: electric, Genie GS1532. Year of manufacture: 2010. Pjdez Hdycjpfx Alwsgt Metered operating hours: 904. Working height: 6.5 meters. 24-volt batteries with 230-volt charger. In working condition. Video, photos and more information also available via WhatsApp! Price net + 21% VAT, or net export price with VAT number. We speak Dutch. Wir sprechen Deutsch. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: excellent (used), Year of construction: 2011, Type: Horizontal CNC: Yes MAZAK QUICK TURN SMART 100 S Machine type: CNC Horizontal Turning Machine Manufacturer: Yamazaki Mazak Model: QUICK TURN SMART 100 S Year of manufacture: 2011 Country of manufacture: Singapore CNC control: MAZATROL SMART Number of axes: 2 Chuck size: 6” Maximum spindle speed: 6,000 rpm Maximum turning diameter: 280 mm Maximum machining length: 310 mm Maximum swing over bed: 580 mm Bar capacity: approx. 51 mm X-axis travel: 200 mm Z-axis travel: 340 mm Turret: 12-station Tailstock: Yes Spindle nose: A2-5 Spindle bore: approx. 51 mm Pgjdpfoz Hdx Sox Alwjt Machine weight: 3,400 kg DESCRIPTION : MAZAK QUICK TURN SMART 100 S CNC lathe, manufactured in 2011. Equipped with MAZATROL SMART CNC control, 2-axis configuration, 6” chuck, 12-station turret and spindle speed up to 6,000 rpm. Maximum turning diameter 280 mm and machining length 310 mm. Machine weight: 3,400 kg.

Condition: used, empty load weight: 1,900 kg, maximum load weight: 14,100 kg, overall weight: 16,000 kg, loading space length: 7,700 mm, loading space width: 2,460 mm, GERMAN DEALER offers: BDF swap body platform 7.82m, galvanized, with lashing rings, craneable, 16,000 kg gross weight, 1,900 kg unladen, 7,700mm x 2,460mm. Multiple units available. Numerous swap bodies and drawbar trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### NATIONWIDE DELIVERY AVAILABLE IN GERMANY! MEPO-Nutzfahrzeuge has been supplying since 1983! VIEWING BY APPOINTMENT ONLY! ##### Pgjdpjz Hdx Ejfx Alwot