Hrastnik Maschinenbau GmbH

Condition: used, Year of construction: 1972, functionality: limited functionality, FRECH DAM 100, year of manufacture 1972. General overhaul by Brescia Presse in 2000. The hydraulic system was converted to an external two-stage hydraulic pump with tube cooler. Mold spraying system Wollin, cooling belt and holding furnace RAUCH MO 125 E by RAUCH. Further details and pictures on request. Laodpfsxn Sp Dex Aabsh

Condition: ready for operation (used), Year of construction: 2006, A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible. Ledpsw R Dgzofx Aabsah

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Lajdpfx Aowywn Esabjh

Condition: used, Year of construction: 1998, workpiece weight max. 2000 gr Used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer Lodpfx Aowx R Uieabsah During repair we exchanged weight cell and control.

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 Laodswpr Ufepfx Aabsh SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: C1403, Foundry machine for aluminum, IDRA 280 TONS REFURBISHED BY TECNOPRESSE IN 2017 Good working condition Ledswpr N Ajpfx Aabjah AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Condition: good (used), functionality: fully functional, FRECH DAK 580-62 DRC Die-Casting Machine, used Machine number 430302, pressing force 5800 kN, opening force 155 kN, maximum opening stroke 680 mm, double toggle lever (mould lock), pressure chamber design cold chamber, press-in force 589 kN, filling piston diameter 60 to 110 mm, filling volume of pressure chamber 1101 to 3700 cm³, specific pouring pressure 642 to 2155 bar, largest blast area approx. 274 to 920 cm³, clamping plates 1120 x 1120 mm, clear width between columns 700 x 700 mm, mould height max. 800 mm, min. 350 mm, mold area 446 x 446 mm, 4 columns, column cross-section 140 mm³, software version SBS 20.10 VISUALIS 17.10, including dosing furnace MELTEC AVDF 1200/5000, year 2016, Serial number 3376/16, handling robot ABB, spray head, temperature control unit REGLOPLAST 300DG/12/FM30/1K/RT45, serial number 371412, without year of manufacture. Technical attributes Laodpfswc Tn Tex Aabeh dimensions (l x w x h) approx. 8000x5500x3500mm weight approx. 36000kg year of construction 2000

Condition: good (used), Year of construction: 2001, functionality: fully functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1000 mm, clamping platens 1300 x 1300 mm, column distance 825 mm, column diameter 180 mm, casting force max. 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1539 to 4523 cm³, operating pressure 160 bar, drive motor 45 kW, with dosing furnace MELTEC AVDF 1200/5000, year 2017, serial number 3469/17, 30 kW, handling robot ABB, year 2007, with control system, spray head, power supply unit in control cabinet missing, pump defective, as spare parts donor Technical attributes dimensions (l x w x h) approx. 8000x7500x3500mm Lajdpfswc Tdzox Aabsh weight approx. 36000kg year of construction 2001

Condition: used, Year of construction: 2017, heating capacity 2 x 12 kW Cooling capacity 2 x 35 kW Used heating and cooling unit from Robamat for die casting machines. This two-circuit device is designed for the temperature control of die casting tools with water. Available ex stock. Checked, maintained and repaired at service partner of the manufacturer Lodpfov U Dl Ijx Aabjah Circuits: 2 Flow temperature max. 160°C Heating capacity 2x 12kW Cooling capacity 2x 35kW Voltage 3x 400V / 50Hz Production cycle - break Interface RS485 new pump protection filter casing and filter insert

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, stroke length: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Tie Bar Diameter: 125 mm Clearance Between Tie Bars: 579 x 579 mm Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Power Requirement: 22 kW Machine Weight: 11,974 kg (26,400 pounds) Lsdpfov D Dwpex Aabsah Sold with trimming press and manipulator.

Condition: new, Year of construction: 2024, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm Lodpevvx Hcofx Aabjah casting capacity 130 kN casting plunger stroke 175 m/m injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 m/m Used Die Casting machine DAW XX with XX control and real-time injection for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement. ----- Used Die Casting machine DAW XX with XX control for the use of zinc alloys. Available from used machine stock. On the machine some repairs were carried out by us as manufacturer. Amongst other things, the closing unit was overhauled, all cylinders new sealed and recognizable defective parts replaced. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. ----- Used Die Casting machine DAW XX without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, 6166 000, TiMix 5, microtiter plate shaker Model: 6166 000 Type: TiMix 5 Condition: Used Lodpfx Aeuz Ebhjaboah

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Laodoucfwpopfx Aabjh

Condition: ready for operation (used), Year of construction: 1982, Clamping force: 300t, mold clamping area X/Y: 880mm/880mm, plunger stroke: 400mm, column diameter: 100mm, ejector force: 18t. Height adjustment: 200mm, clamping surface between the columns X/Y: 555mm/555mm, mold height min./max.: 200mm/650mm, mold opening stroke: 540mm, max. casting weight: 5.2kg. Dimensions X/Y/Z: approx. 6150mm/1950mm/2615mm, weight: approx. 16000kg. This machine is a spare parts carrier. Controls, electrics and paintwork must be renewed. On-site inspection is possible. Lsdpfott Dybox Aabjah

Condition: new, Year of construction: 2024, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,3 t lock stroke 280 mm capacity of ejector 61 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 78 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 147, 191, 241 cm 2 volume cast pressure 396, 327, 275 da/cm² casting area 226, 274, 326 cm 2 Traverse Stroke 220 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) Ledpsr Hwf Aefx Aabsah 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.1Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.3Spray rail CR 275

Condition: new, Year of construction: 2024, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm Lodpsr Hwfxjfx Aaboah column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.2Integrated water circuit 2+4 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.0Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.1.2Spraymotion 411 E with servo drive 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.1Spray rail CR 155 7.12.3 Low noise chute

Condition: new, Year of construction: 2024, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Lasdpjiu Smbsfx Aaboh Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1Cover for drop through area at the subframe 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.4.2Securing of ejector platen 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.1.1Nitrogen pressure control for piston accumulator 3.2.4Multi-Chamber furnace with pump 3.2.5Isolated Cover for Crucible Multi-chamber-furnace 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.2Integrated water circuit 2+4 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.2Convenience Package – Casting – 5.2.1Ejector Pressure graphics in DATADIALOG control 5.4.1Data logging Scope 5.4.2Configurable In- and Outputs 5.6.0Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.2Spray rail CR 245 7.12.3Low noise chute

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. Lsdjfbl E Sspfx Aaboah 7900 kN clamping force. 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently.

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Machine is DISMANTLED Lasdpfx Ajfbl Ensabjh