Promet AG

Condition: ready for operation (used), Year of construction: 2015, Belt sander manufactured in 2015. This Kundig Premium-1 1100K features a supply voltage of 400 V/AC and a control voltage of 24 V/DC. It operates at a current of 24.90 A and has a power rating of 12.62 kW. If you are looking to get high-quality sanding capabilities, consider the Kundig Premium-1 1100K machine we have for sale. Contact us for further details. • Supply voltage: 400 V AC • Control voltage: 24 V DC Godpjyt Rlpsfx Abhebi • Current: 24.90 A • Power rating: 12.62 kW • Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2008, Belt sander manufactured in 2008. This TECNOLEGNO COMPACT 52 is a 5-aggregate sander designed for sanding edges and profiles. If you are looking to get high-quality sanding capabilities, consider the TECNOLEGNO COMPACT 52 machine we have for sale. Contact us for further details. Gbsdpeyt N Ntefx Abhoi • 5 - Aggregate sander for sanding edges and profiles

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. Godpfjyn E H Rox Abhobi The dust collection container with filter fleece is located underneath. The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: like new (used), Year of construction: 2020, operating hours: 28 h, functionality: fully functional, total width: 1,970 mm, total height: 2,410 mm, total length: 2,035 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,600 kg, grinding height: 160 mm, grinding belt speed: 18,000 mm/s, type of input current: three-phase, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, workpiece width (max.): 1,300 mm, Equipment: type plate available, Metgrid sp. z o.o. is selling an almost unused wide belt sander from the renowned manufacturer Costa. Machine specifications: - Costa MD6 CC 1350 wide belt sander - Maximum sanding width: approx. 1300 mm - Working thickness range: 0.8–160 mm – suitable for sanding sheets and profiles - Equipped with two sanding belts and a scotch brite brush - Comes with a full set of additional equipment: > Dust extraction system > Conveyor roller tables (custom designed and built) > Foil applicator for sheets (custom designed and built) Gbsdpfxjyl Svtj Abhji The machine is like new, which is confirmed by a recent service report: "Technician’s service notes: Machine inspection. Operating hours: 28. Overall condition of the machine is very good, cylinders and drive belt in perfect condition. Test sanding on a stainless steel sheet – no remarks. Filter: 26 hours. Operational, with some external signs of corrosion." More photos can be provided upon request for interested parties. The sander can be viewed in Zgierz, near Łódź. For any questions, please contact by message or phone.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20 h, working width: 650 mm, Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details. • Sanding belt dimension: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V • Duty type: S1 • Variable feed speed: 3.7–16 m/min • 1 combination aggregate • Interchangeable sanding pad • Rubber contact roller: 85 Shore • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction connection: 120 mm • Control: Conventional (non-CNC) • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional equipment • Double-sided roller table extension Gbjdpfx Abeyli H Ajhsi • Abrasive belts included: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs)

Condition: ready for operation (used), Year of construction: 2006, working width: 1,100 mm, overall weight: 2,460 kg, This CB Levigatrici belt sander was manufactured in 2006. It features a maximum working width of 1100 mm, operates on 400 V / 50 Hz, and has a total power of 48 kW. Weighing 2460 kg, it's a robust choice for your sanding needs. Consider the opportunity to buy this CB Levigatrici belt sander. Contact us for more information about this machine. • Grinding units: 3 • Electrical: 400 V / 50 Hz Godoygwuqspfx Abhobi • Total power: 48 kW • Rated current: 94 A • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK SG460S 400V Metal Drum Grinder – Advanced Through-Feed Grinding Machine The CORMAK SG460S 400V metal drum grinder is an advanced through-feed machine designed for precise grinding of metal components. With a grinding drum and a working width of 460 mm, this model is ideal for serial production and facilities that require high-quality surface finishing. It is especially effective for processing small parts after welding or laser cutting. Key Advantages of the Machine 120 mm grinding drum ensures even grinding without risk of burning or scratching Conveyor belt provides smooth transport of the workpiece and stable guidance under the grinding unit Adjustable feed speed from 0 to 4.0 m/min allows adapting the working pace to the material type Dust extraction system with a Ø100 mm outlet ensures efficient dust removal, improving working conditions and component longevity Robust industrial construction (148 kg) guarantees machine stability even during intensive use Design and Technology The SG460S model is designed for stability, precision, and durability. The main frame is made of steel, providing resistance to vibration and deformation. The main 3.0 kW motor drives the grinding drum at 2800 rpm, enabling effective removal of excess material and burrs even in hard steel grades. The 60 W feed motor works with a speed controller, allowing the operator to precisely control the grinding process. The large conveyor belt width of 465 mm enables processing wide elements in a single pass, minimizing operating time. Precision and Work Efficiency The machine provides precise control over the thickness of the processed workpiece in the range of 5 to 80 mm. The grinding belt speed of 14 m/s ensures high surface quality without burning effects. The drum diameter and working length (465 mm) translate into even contact pressure and a uniform final result. Standard Equipment 120 mm grinding drum Conveyor belt width 465 mm Main motor 3.0 kW Feed motor 60 W Dust outlet Ø100 mm Worktable height adjustment Optional Equipment Metal dust and chip extraction system Grinding belts of various grit sizes Automatic material feeding system Technical Specifications Main motor power: 3.0 kW Voltage: 400 V Grinding drum speed: 2800 rpm Gjdpjycfzksfx Abhjbi Grinding drum belt size: 2760 × 75 mm Conveyor belt size: 1120 × 450 mm Worktable size: 460 × 465 mm Dust outlet diameter: 100 mm Conveyor feed speed (variable): 0–4 m/min Max. workpiece height: 80 mm Min. workpiece height: 5 mm Max. workpiece width: 460 mm Grinding drum dimensions (Ø × length): 120 × 465 mm Feed motor power: 60 W Machine dimensions: 880 × 720 × 1230 mm Net weight: 148 kg

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software Gbodpfjyaqg Tex Abhoi • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm

Condition: ready for operation (used), Year of construction: 2018, This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Machine Benefits Technical Machine Benefits • Working width: 1100 mm • Min. /max. Working height: 4 - 170 mm • Sanding belt dimensions: 1115 x 2150 mm • Feed speed: 4. 5 / 9 m/min • Main motor 15 kw (20 hp) Extra Information ontrol Unit Electronic ammeter for the main motor to display current consumption Electronic display of the working height Gbsdpfxox Nr Sde Abhsi Electronically controlled sanding belt Electronic working height adjustment Electronic Programming Unit LOGIC 50 K Electronic Programming Unit LOGIC SC with LCD display with two rows of dust-proof polishing keypads and integrated LED signals Workpiece Rubber pressure rollers Kickback protection at the inlet Rubber feed carpet Roller table with two rollers at the inlet and outlet of the work table Pneumatic on/off switching of the roller - 1st unit Pneumatic on/off switching of the roller - 2nd unit TES elastic link sanding pad Pneumatic on/off switching of the sanding pad unit Tools "R" unit with roller "CS" combination unit with roller/sanding pad Rubber-coated calibration roller Rubber-coated sanding roller Hard sanding pad "RA" diagonally ribbed steel contact roller in the first unit

Condition: new, Year of construction: 2022, width of the strips 75 mm band length 2000 mm band speed 36 m/min total power requirement 4 kW weight of the machine ca. 82 kg dimensions of the machine ca. 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results Godsx H Alispfx Abhjbi - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tiltable sanding unit - Fold-away protective screen

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,551 h, total width: 1,790 mm, total height: 2,150 mm, overall weight: 2,300 kg, product length (max.): 1,690 mm, This Kundig Premium-2 1350-RG belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt release system. Accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Consider the opportunity to buy this Kundig Premium-2 1350-RG belt sander. Contact us for more information about this machine. Additional equipment • Steel roller • Rubber roller with a device for a needle roller (unused) • Belt release Machine Benefits Technical Machine Benefits • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity unspecified) • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency-controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency-controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Maximum current consumption RP/RE: 36 A • Maximum current consumption RE-L: 56 A • Required slow-blow fuse minimum RP/RE: 40 A • Required slow-blow fuse minimum RE-L: 63 A • Cable cross-section reduced load RP/RE: 5x6 mm² Gjdpfx Absx D E I Eshjbi • Cable cross-section reduced load RE-L: 5x10 mm² • Cable cross-section correct dimensioning RP/RE: 5x6 mm² • Cable cross-section correct dimensioning RE-L: 5x10 mm² • Extraction connection for 1st unit diameter RP/RE: 180 mm • Extraction connection for 1st unit diameter RE-L: 180 mm • Extraction connection for 2nd unit diameter RE-L: 180 mm • Extraction connection for belt blow-off diameter RE-L: 150 mm • Required total extraction connection diameter RP/RE: 200 mm • Required total extraction connection diameter RE-L: 300 mm • Air velocity at extraction openings RP/RE: 22 m/s • Total air volume for dust extraction RP/RE: 2000 m³/h • Total air volume for dust extraction RE-L: 5400 m³/h • Negative pressure RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for belt or workpiece blow-off per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Maximum workpiece width RP/RE: 1350 mm • Minimum workpiece thickness RP/RE: 4 mm • Maximum workpiece passage height RP/RE: 200 mm • Working height including machine base RP/RE: 910 mm • Feed speed range RP/RE: 3–15 m/min • Total machine length RP/RE: 1690 mm • Total machine length RE-L: 1850 mm • Total machine width RP/RE: 1790 mm • Machine height including base and extraction outlet RP/RE: 1950 mm • Maximum machine height including base and extraction outlet RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. • Contact roller unit • Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width • 7" color touch screen • Digital grain compensation Gedox D Eyhspfx Abhjbi • Vacuum table with blower integrated in the machine stand • Infinitely variable feed speed 2.5–18 m/min (controllable from the touch screen) • Sanding width: 1100 mm • Sanding height: 3–170 mm • Sanding length: 1900 mm

Condition: ready for operation (used), Year of construction: 2002, This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine. Gedex D Dp Uspfx Abhebi Application Types Sanding

Condition: ready for operation (used), Year of construction: 2007, operating hours: 37,000 h, functionality: fully functional, Timn Scope of Supply • Item 1: Timesavers machine model 71-serie-1600-WW-RT (for No. 4 finish). • Item 2: Timesavers machine model 71-serie-1600-BB-RT (for SB finish). • Item 3: Filtration equipment • Item 4: Laminator UNIVERSAL LAMINATOR UL 2931 • Item 5: Extensive set of spare parts (contact rollers, billyrollers) • Additional equipment: tables and pallet stacks • Year of manufacture: 2007 • Operating hours: 37,000 • Machine in working condition. 1.2.1 ITEM 1: First Machine: 1 TIMESAVERS, 71 series-1600-WW-RT General Description: Grinding machine equipped with two wide abrasive belt top contact rollers for grinding and finishing stainless steel coils to a NO. 4 finish. Operation: • Load meter indicates percentage of head motor load, allowing full utilization of available horsepower. • Mitsubishi E 1070 Control unit including: • Electronically digital feed speed read-out in mm/min. • Electronically digital thickness set-up read-out in mm. • EMC Filter (for fluctuations in the electrical supply). 1st Head for No. 4 finish: • Contact roller: Ø280 mm, with special vulcanized oil and heat-resistant rubber, 55 Shore hardness, with special profile groove. • Heavy-duty grinding head. • Fine height adjustment of the head, precision to 0.01 mm for pressure or abrasive belt thickness adjustment. • Displacement can be read out on the dial indicator. • Outboard support: quick-release M20 bolt for fast abrasive belt changes and rigid head support. • Abrasive belt tension: air-operated and activated by thumb switch. Air tensioning automatically compensates for belt stretch. • Machine cannot be started unless belt is tensioned. • Abrasive belt tracking: electronic system automatically keeps the high-speed abrasive belt on the head. • Belt trimmer: lever to correct belt mis-tracking. • Tracking limit switch: safety stops the grinding head in case of tracking failure. • Frequency-controlled main motor, 45 kW, 8-22 m/sec for achieving different finishes. 2nd Head for No. 4 finish: (Specifications identical to the 1st head: 280 mm contact roller, frequency-controlled 45 kW motor, etc.) Godsxvbxdspfx Abhsbi Technical Specifications (Item 1): • Max. working width: 1600 mm • Abrasive belt dimensions: 1600 x 2620 mm • Working height opening: 0.5-50 mm • Feed speed (frequency controlled): 0-30 m/min • Main motors (1st & 2nd head): 45 kW each • Total installed power: Approx. 100 kW • Machine weight: 9,000 kg _____ ITEM 2: Second Machine: TIMESAVERS, 71 series-1600-BB-RT General Description: Brushing machine equipped with two brush units for SB Scotch-Brite brush finish. Brush Head Specifications (1st & 2nd Head): • Scotch-Brite brush: Ø400 mm • Motorized height adjustment • Adjustable oscillation: 200 to 700 oscillations per minute • Frequency-controlled main motor, 22 kW per head Technical Specifications (Item 2): • Max. working width: 1600 mm • Brush diameter: 400 mm • Working height opening: 0.5-80 mm • Brush oscillation motor: 3 kW • Machine weight: 12,000 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,500 kg, compressed air connection: 6 bar, table length: 1,600 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 4,000 mm, workpiece length (max.): 1,500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing stainless steel sheet surfaces. Wide belt sanding machine featuring two top-mounted wide belt sanding units and one brush unit. This is a dry-operating machine equipped with a Wandres production cleaning brush. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Technical Data: Year of manufacture: 2021 Gsdpjq Tp H Hefx Abhsbi Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Adjustment accuracy: 0.01 mm Flat feed belt Feed speed: 4-20 m/min Electrical: Main motor 1st unit, frequency controlled: 22 kW Main motor 2nd unit, frequency controlled: 22 kW Main motor 3rd unit, frequency controlled: 15 kW Feed motor: 3 kW Electrical connection: 400 V Frequency: 50 Hz Compressed air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Wandres air consumption: 235 l/min Dust extraction PER unit: Required capacity at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Extraction and/or on-site installation services can be offered upon request. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine!

Condition: new, Year of construction: 2025, DM1100 Z – NEW DESIGN – at €29,800-- Gbedpfx Asimdmtsbhji Deburring up to 1100mm width. The DM1100 Z refines and deburrs light metal sheets cut by laser, punching, or shearing. This machine is equipped with a single wide-belt station, which can be used for deburring parts ranging from 50×50 mm in size up to 1100 mm in width. The DM1100 Z is also suitable for surface finishing and can operate with both standard abrasive paper and non-woven/Scotch belts. With an additional table, the new DM1100 Z can be combined with an existing DM1100 C edge-rounding machine. We also offer a part return system for this machine.

Condition: ready for operation (used), Year of construction: 1998, Machine come with equepement on picture. Gbjdpfx Aofa S E Iebhji