Ewald Dandler

Condition: excellent (used), functionality: fully functional, Angle Cutter INDUMASCH 260 Dledpfoxyl Evsx Addea

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, control type: manual, degree of automation: manual, actuation type: hydraulic, cutting angle (min.): 30 °, cutting angle (max.): 120 °, cutting force: 12.5 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, punching diameter: 105 mm, throat depth: 300 mm, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, Angle-adjustable notcher with punching station for use with standard Trumpf single tools. Dedpfx Adoxv Sw Djdjla

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² Dedsxrylbopfx Addela 4 mm at 600 N/mm² Stepless angle adjustment 30 - 120° Drive power approx. 4 kW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, Capacity: 250 x 6 mm Electric variable angle adjustment, independently adjustable from 30 to 130 degrees Hydraulic drive Blade height and depth adjustable via potentiometers Table dimensions: 1200 x 900 mm Motor power: 5.5 hp Connection voltage: 380V Length: 1000 mm Width: 1200 mm Height: 1400 mm Weight: 1200 kg Dedpfx Adsxrv Hbsdsla VAT/margin: VAT: The listed price is excluding VAT (VAT deductible for businesses) Note: The information on this page has been compiled to the best of our knowledge, however, its accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we recommend you verify all relevant details.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 654311519, Offer 25321 Technical data: - Cutting length up to 200 mm - Cutting thickness – steel up to 6 mm – stainless steel up to 4 mm - Infinitely adjustable cutting angle: 30° – 140° - Hydraulic hold-down device - Stroke rate: 28 strokes/min - Depth stops with angle adjustment - Table height approx. 920 mm Dedpfx Adjxqycdedola - Drive: 400 V / 4.0 kW - Electric foot pedal - Space requirement approx. W 1050 x H 1350 x D 1200 mm - Weight approx. 950 kg

Condition: used, functionality: fully functional, Year of construction: 1996, cutting angle (min.): 30 °, cutting angle (max.): 140 °, sheet thickness steel (max.): 6 mm, power: 3 kW (4.08 HP), overall weight: 1,060 kg, Equipment: documentation/manual, Capacity: 6 mm. Length of blades: 220 mm. Adjustable blade angle: Variable angle 30-140°. Motor: 3 kW. Year: 1996 Country of origin: Italy. Size (L x W x H): 1150 x 1100 x 1450 mm. Weight: 1060 kg. Dlsdpfx Adoxpf Hlsdja Capacity 60-140° = 6 mm. Capacity 30-60° = 3 mm. (With special blades). With: press brake station with manual back gauge (tool 415 mm.), Rectangular notching unit 100 x 25 mm., radius notching tool, debth regulator and hydraulic locking of blade angle. All our machines will be tested and serviced before delivery.

Condition: used, Year of construction: 1990, plate thickness 8 mm pressure 60 t Dsdpfoxgn Dnex Addjla notching: width x thickness 310-310-8 mm mm weight of the machine ca. 3,5 t

Condition: new, 6.0 mm ST 40 3.0 mm VA 30 - 140 Grad blade length 200 x 200 mm table: 900 x 990 mm work height max. 940 mm Punching capacity 35.0 in 6.0 mm ST 40 Throat / punching unit 135 mm engine output 4.0 kW weight 1020 kg range L-W-H 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover Dodpoxcuybsfx Addjla - Foot pedal with emergency stop

Condition: used, Year of construction: 2001, plate thickness 8.0 mm ST plate thickness 5.0 mm VA table-size 1000 x 950 mm blade length 200 x 200 mm strokes per minute 60 H/min adjustable Winkel 30°-140° mm work height max. ca. 950 mm oil volume 60.0 l engine output 4.0 kW weight of the machine ca. 1200 kg range L-W-H 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots Djdexab Sxepfx Addela * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : ?machineno=1008-9397087

Condition: used, Year of construction: 1993, plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment Dledsxab Srjpfx Addoa - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA

Condition: used, Year of construction: 1996, plate thickness 6.0 mm ST thickness at "Niro-steel" 4.0 mm plate thickness 8.0 mm ALU Dedpsxabx Eofx Addela angle adjustable from - to 30 - 140 Grad table: 950 x 890 mm blade length 220 x 220 mm stroke 35 H/min work height max. 1150 mm total power requirement 3.0 kW weight 800 kg range L-W-H 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - ?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Condition: used, Year of construction: 1989, Used notching machine from Boschert Model: K 30 120 Adjustable angle Dlsdpfx Ajw Rvk Eeddea Pneumatic clamping of the corner Year of manufacture: 1989

Condition: good (used), Year of construction: 2009, Technical data can be seen on the data plate! Dlsdpfx Adewqmrhodea

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 6 mm, table height: 900 mm, overall weight: 1,550 kg, total length: 1,500 mm, total width: 1,200 mm, total height: 1,250 mm, cutting length (max.): 200 mm, Hydraulic corner shear with infinitely adjustable angle between 30 and 120 degrees. Capacity St 40 max. 200 x 200 x 6 mm, Rvs 200 x 200 x 4 mm. Equipped with 2 stops with degree graduation and foot pedal for operation. Dsdpfowqfwcex Addola

Condition: used, functionality: fully functional, EUROMAC MULTI 220/6R NOTCHING MACHINE Maximum cutting length 220 mm Maximum sheet thickness 6 mm Variable cutting angle 30 - 120 WITH PUNCHING MACHINE EUROMAC Multi 220/6R 2-station notching and bending machine Press brake, press brake, cutting machine Cutting capacity steel from 6 mm to 45 kg/mm2 Becu Akmemck Ryo Iswn 4 mm for stainless steel Station I (notching) Notching angle from 60° to 140° (with special knives from 30° to 140°) Dlodpfx Adewqdfxsdsa Knife length 220 mm Table dimensions 950 x 640 - manual angle adjustment by handwheels - Notching angle with built-in knife set from 60° to 140° - hydraulic knife locking upper and lower - automatic cutting gap adjustment - Blank holder - Measuring tapes built into the table - Stop guides with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 tons Table dimensions 950 x 340 Working height 1100 mm - Regular lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4 prisms 90°, length = 415 mm - Upper tool 90°, length = 415 mm Motor power 4kW Mains connection 400 volts, 50 Hz OVERALL DIMENSIONS 115X100X125 WEIGHT: 900 KG

Condition: used, Year of construction: 1990, cutting angle 90 ° Djdpfx Aowgi Nheddola cutting length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3,0 kW weight 900 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 206988, Order No. 24554 Technical Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Continuous cutting angle adjustment from 30 to 135° - Stroke rate 60 rpm - Table support surface with T-slots 800 x 1000 mm - Depth stops with measuring scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - Electric - Foot switch - Space required approx. W 1000 x H 1650 x D 1700 mm Dlsdpsv Uytzofx Addja - Weight approx. 1100 kg

Condition: used, Year of construction: 1999, plate thickness 4 mm plate length 200 mm total power requirement 3 kW weight of the machine ca. 550 kg dimensions of the machine ca. 1,0 x 0,8 x 1,0 m Dlodpfevy Iklox Addea

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), overall weight: 1,200 kg, cutting length (max.): 200 mm, Selling our notching machine FIM Versa 206 Machine can be tested under power at any time. TECHNICAL DATA ; Capacity: 200 x 200 x 6 mm steel ; Djdpfjvld Hysx Addela Table dimensions: 1000 x 750 mm ; Blade length: 200 mm ; Angle adjustment: 30 - 60° / 60 - 135° Power: 4KW Total weight: approx. 1200kg

Condition: used, Year of construction: 1982, plate thickness 8 mm blade length 250 mm angle adjustable from - to fest table surface area 840 x 750 mm total power requirement 3,0 kW weight of the machine ca. 1,3 t dimensions 1,4 x 1,1 x 1,5 m Hydraulic notching machine Djdpfx Adsvki Hijdjla - Footswitch - 2 pcs. sheet metal stop

Condition: used, plate thickness 6 mm blade length 220 mm angle adjustable from - to variabel table surface area 1000 x 800 mm Dlodpfx Aevki Exsddoa weight of the machine ca. 0,9 t dimensions 1,3 x 1,3 x 1,4 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: used, plate thickness 3 mm blade length 250 mm angle adjustable from - to fest 90 Grad table surface area 900 x 790 mm total power requirement kW weight of the machine ca. 0,65 t dimensions 1,2 x 0,9 x 1,1 m Djdpfx Adovki D Uodela Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: good (used), functionality: fully functional, Year of construction: 1989, sheet thickness steel (max.): 6 mm, table height: 900 mm, power: 4 kW (5.44 HP), overall weight: 2,150 kg, total length: 1,550 mm, total width: 1,200 mm, total height: 1,350 mm, cutting length (max.): 200 mm, Hydraulic notching machine, adjustable angle 30-120°, cutting capacity 6 mm, cutting length 200 mm, punching station on the back siede, footpedal, accessoires Dledpfovkg Nujx Addoa

Condition: used, Year of construction: 1993, Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Dodju Eh Rgepfx Addsla Blade length: 200 mm Digital angle displays right and left Weight: approx. 1,200 kg Good condition

Condition: good (used), Technical data: Hydraulic angle-adjustable notching machine Dsdju A Iutepfx Addela Manufacturer: Indumasch Type: 206/N Table dimensions: 1000x800 mm Cutting thickness: 6 mm (unalloyed steel) / 4 mm (stainless steel) Blade length: 200 mm Cutting head stepless: 30-135 ° Total power requirement: 3 kW Machine dimensions: approx. 1660mmx1000mmx1500 mm (LxWxH) Machine weight: approx. 1100 kg