Scarlur

Condition: excellent (used), functionality: fully functional, power: 12.2 kW (16.59 HP), fuel type: diesel, overall weight: 1,664 kg, Year of construction: 2022, operating hours: 817 h, Equipment: rubber tracks, JCB 15C-1/SW/2x bucket/1.7 t/swing arm • Manufacturer: JCB • Type: 15C-1 • Year of manufacture: 2022 • Operating hours: 817 hrs • Power: 12.2 KW/16.59 HP • Engine: 3-cylinder Perkins 403D-07 diesel • Swing arm • Rädlinger quick coupler MS01 • Manual quick coupler • Dozer blade • Rubber tracks • Digging depth: 2.42 m • Transport length: 3.86 m • Transport width: 1 m • Transport height: 2.32 m • Next service: 12/2026 • Total weight: 1664 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions. Pgjdpoz Hb Spsfx Alwst

Condition: good (used), Year of construction: 1986, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Pjdpfx Ajz Hb Sijlwogt Total power requirement: 45 kW Machine weight approx.: 18 t

Condition: used, Year of construction: 2007, Overview Pedpfxoz Hb Scj Alwegt This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Year of construction: 1991, operating hours: 23,976 h, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 355 Lotse, spindle speed (max.): 3,000 rpm, table length: 1,000 mm, table load: 6,000 kg, table width: 1,200 mm, number of axes: 5, This 5-axis JUARISTI 12/TS1.7 boring machine was manufactured in 1991. It features a substantial X-axis travel of 2000 mm, Y-axis travel of 1200 mm, and Z-axis travel of 1200 mm. The CNC rotary table dimensions are 1000 x 1200 mm, with a maximum table load of 6000 kg. If you are looking to get high-quality boring capabilities, consider the JUARISTI 12/TS1.7 machine we have for sale. Contact us for further details. - Travel W-Axis: 590 mm- Spindle Diameter: 115 mm- Tool Taper: SK50 / Mass BT- Foundation Type: T-Form Pgedpfx Aoz Hb N Iolwet Technical Specification Taper Size SK 50

Condition: used, Agfa ST 125SX plate stacking machine. Pjdez Hb Nzspfx Alwogt

Condition: used, Year of construction: 2006, Overview Pedpfx Aljz Hb Nujwjgt This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: T20-3 KMT - Year of manufacture: 2006 - Machine type: bottle dryer (air knife tunnel) - Conveyor: plastic chain, 120 mm wide - Power supply: 400 V, 3 phases, 50 Hz - Control voltage: 24 V DC - Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Equipment - Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts - Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers - Siemens SIMATIC touch panel (French, Dutch, German) with output counter, selector switches and emergency stops - Control cabinet with four Danfoss VLT 2800 frequency converters - Stainless steel frame on adjustable feet, enclosure with transparent hinged guard doors - CE marked Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 10,567 h, We are selling a mobile excavator O&K MH PLUS, manufactured in 1995, with various accessories. The operating hour meter reads 10,567. The tires were replaced approximately 4 years ago and show very little wear. Various hydraulic hoses have been replaced. See photos. The excavator is used very rarely and is always stored in a covered hall. Podpfjz Hb Nnex Alwsgt Deep digging bucket: approx. 30 cm Deep digging bucket: approx. 80 cm Ditching bucket: approx. 200 cm The excavator must be picked up on site.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 215 mm, travel distance Z-axis: 1,250 mm, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 RatioLine was manufactured in 2000. It features a nominal power of 43 kW and a robust machine weight of 6550 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Index G300 RatioLine horizontal turning machine we have for sale. Contact us for further details. - Current Type / Frequency: 3 Ph / 50 Hz- Nominal Voltage: 400 V~- Control Voltage: 24 V-- Nominal Current: 78 A- Nominal Power: 43 kW- Cabinet Weight: 710 kg Technical Specification Pgjdpfx Ajz Hb Nhslwot Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Pgjdpjz Hb Nbofx Alwjt

Condition: used, functionality: fully functional, total width: 80 mm, total length: 128 mm, total height: 93 mm, type of input current: AC, input voltage: 100 V, control voltage: 240 V, product height (max.): 128 mm, Industrial metal detector Mesutronic – with control panel Podpfx Ajz Hb I Rolwegt For sale: tunnel-type metal detector for installation on a conveyor belt, complete and in good condition. External dimensions: 128 × 80 × 93 cm Useful internal dimensions (tunnel): 107 × 80 × 70 cm Includes control panel with digital display and programming keys. Original Mesutronic electronics with MTM Power PMA 30/12-24-15-MG power supply. Input voltage: 100–240 V~ / 47–63 Hz Condition: used, inspected, good physical condition. Mounted on an EPAL pallet for easy transportation. Applications: quality control in recycling, plastics, food, packaging, and other industries.

Condition: used, Koenig Rex Classic T4/3 bun roll machine 4-pocket SK58  weight range 35-85 grams capacity 6000 pcs/h setting device with long moulder Pgedpfx Aljz Hb Iwjwjt

Condition: used, For export only! ECRM Mako5, film imagesetter, 50/70 format, HQ-RIP. Pgjdpfjz Hb Iqsx Alwst

Condition: used, Immediately available. Pjdpez Hb Ikefx Alwogt

Condition: new, Year of construction: 2026, functionality: fully functional, Screen Conveyor BELT CONVEYOR – 600mm/800mm/1000mm/1200mm/ WIDTH with ANY LENGTH 600 mm - 800 MM - 1000MM -1200MM CONVEYORS FROM FABO COMPANY • High quality Polat brand reductor • Drive drums are rubber coated and threaded. • Belts are EP 125, 4 layers’ double stick 10mm thickness • Conveyor belt system was protected with emergency stop • All motors are GAMAK or equivalent brand • A side scraper system is available to prevent spillage of the final product into the stock area during crushing Podpfxsz Hb Idj Alwegt • The gear units are 3 transmission type and the new generation is with torque connection system • Long life rollers FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, Screen Conveyor BELT CONVEYOR – 600mm/800mm/1000mm/1200mm/ WIDTH with ANY LENGTH 600 mm - 800 MM - 1000MM -1200MM CONVEYORS FROM FABO COMPANY • High quality Polat brand reductor • Drive drums are rubber coated and threaded. • Belts are EP 125, 4 layers’ double stick 10mm thickness • Conveyor belt system was protected with emergency stop Psdpfx Alsz Hb H Tjwjgt • All motors are GAMAK or equivalent brand • A side scraper system is available to prevent spillage of the final product into the stock area during crushing • The gear units are 3 transmission type and the new generation is with torque connection system • Long life rollers FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), machine/vehicle number: H - 6030, Year of construction: 2013, Model No.: 143783 Maximum load: 300 kg Equipment / Additional information: Loading direction: left Podpfxez Hb H Hj Alwjgt Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO ME Series mobile sand screening plant is an ideal solutions for the classifying materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 9 m3 - Plant Dimensions: 14130x4600x4160 mm - Production Capacity: 200-300 Tons Per Hour - Vibrating Screen and Deck: 2000x5000 (4 decks) - Total Motor Power: 65 Kw - Generator (optional): 100 kvA ME-2050 IS A COMBINATION OF: Pedpfoz Hb Hysx Alwegt • Bunker (Hopper) • High Stroke Vibrating Screen • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spraying system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output approximately 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; up to 60 mm available. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spraying unit top / bottom. Joint milling unit. Glue application unit. 2-roll edge magazine. Pressing zone. Cutting unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm as well as for 1 mm edges. Pgedoz Hb Hmspfx Alwet Location: Customer.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 220 mm, travel distance Z-axis: 400 mm, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, number of axes: 2, Vertical turning machine manufactured in 2007. This DOOSAN PUMA V400-2SP features a maximum turning diameter of 400 mm and a turning height of 400 mm. It includes dual 8/12-station turrets and operates with a FANUC Series 18i-TB CNC control. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA V400-2SP machine we have for sale. Contact us for further details regarding this machine. Pjdpfx Aez Hb Htslwogt • Control feature: Independent dual-channel operation (Right & Left) • Machine condition: Good working condition, currently under power • Max. turning diameter: Ø 400 mm • Max. turning height: 400 mm • Max. swing over bed: Ø 490 mm • Chuck size: 315 mm • Spindle nose: A2-8 • Turrets: 2 × 8/12-station turrets • Guideways: Box guideways (heavy duty) Additional equipment • Rear/side chip conveyor with cart • High-pressure coolant system Technical Specification Driven Tools No

Condition: used, mileage: 1,57,000 km, power: 235 kW (319.51 HP), first registration: 04/2019, empty load weight: 7,606 kg, maximum load weight: 10,394 kg, overall weight: 18,000 kg, tire size: 295/80R22.5, axle configuration: 4x2, wheelbase: 3,875 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 4,600 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, navigation system, onboard computer, seat heater, trailer coupling, Vehicle location: en route / in transit, steel body, short cab, 1 air-suspended driver's seat, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, sun visor, center console, navigation system, ABS (anti-lock braking system), constant throttle, lifting and lowering function, differential lock, work lights, leaf-air suspension, trailer hitch (air, light, hydraulic), low-noise G1, lashing rails, green environmental badge. Pgodpfx Aez Hb Hgelwet Wheelbase: 3875 mm, Body: Meiller tipper, 3-sided steel sideboards, oscillating and foldable, disc brakes on front and rear axles that relieve the suspension, data subject to change as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per shelf and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 37.00 m - Shelf load capacity: 2,000 kg per shelf - Bay load capacity: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue painted - Levels: ground + 3 beam levels - Pallet spaces: 160 including ground spaces - Version: Used Jungheinrich MPB SCOPE OF DELIVERY: - 11 × Uprights, approx. 520 × 110 cm, pre-assembled - 60 × Beams, approx. 360 × 12 × 5 cm - 120 × Safety pins PRICE: €3,750.00 net €4,462.50 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optional - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new construction, renovation, or expansion – we will provide you with competent advice on your racking configuration. Podpfx Aez Hb Haelwjgt SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions on site. Many systems are set up and can be experienced directly. Our specialist consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND WHAT YOU'RE LOOKING FOR YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us by message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, mileage: 1,001 km, first registration: 01/2014, empty load weight: 280 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2014, load capacity: 3,000 kg, Equipment: crane, Vehicle location: Bovenden. Includes Kinshofer rotary head and upper mounting! Bucket width approx. 600mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Podjz Hb E Aopfx Alwogt

Condition: good (used), functionality: fully functional, power: 55.16 kW (75.00 HP), overall weight: 3,500 kg, fuel type: diesel, fuel: diesel, gearing type: hydrostat, Year of construction: 2017, operating hours: 3,960 h, Equipment: all wheel drive, soot filter, HAKO Citymaster 1600 Pjdpfxoz Hb Evo Alwjgt Municipal utility vehicle with winter maintenance equipment - KIF snowplow/sweeper brush with a 135 cm clearing width - KIF SS-400 salt spreader This Hako Citymaster 1600 was first commissioned in 2017, has approximately 3,960 total operating hours according to the meter, and is in good overall condition with the usual signs of wear and tear, has just undergone a minor service, and is ready for immediate use. The sale is of a used machine and excludes any return, guarantee, or warranty. - Net price: €20,924 // Gross price: €24,900 - Inspection / test drive is welcome - Shipping can be arranged nationwide; the costs depend on the distance! - We would be happy to arrange an attractive leasing/financing offer for you through our leasing partner!

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen. Pgjdpjz Hb Epjfx Alwot

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty racking solution for industrial storage requirements. The modular high-bay racking is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy loading units. Pgjdpfjz Hb Eisx Alwjt PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 3,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam colour: yellow painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright colour: blue painted - Levels: Floor + 2 - Pallet spaces: 99 including floor positions - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 12 x Uprights (approx. 400 x 105 cm), pre-assembled - 44 x Beams (approx. 270 cm) - 88 x Safety pins Price: €2,200 net €2,618 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carriers – freight costs depending on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quote – tailored to your specific requirements. Whether new construction, conversion, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get an in-depth look at our pallet racking, shelving systems, and other storage solutions. Many systems are assembled and ready for demonstration. Our specialist advisors are available to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am to 4:00 pm. Alternatively, send us a message with your name and number, and we will get in touch with you as soon as possible.