VALOR CNC+ Sp. z o.o. Sp.k.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 34,000 h, travel distance X-axis: 570 mm, travel distance Z-axis: 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details. - Main Drive: 19 kW- Machine Control: NUM / Keller/Plus (IBM Monitor setup)- Maximum Torque Duty Cycle: 60% / 100%- Torque: 1800 / 1400 Nm- Max Rapid Traverse (Longitudinal/Cross): 10 / 5 m/min- Tool Turret: 8-position disc turret, Sauter VDI 30- Chuck: Forkardt three-jaw chuck installed, diameter 200 mm- Included Accessories: Steady rest- Operational Status: Out of service since mid-2023 due to operator retirement- Operating Hours: Approx. 34,000 hours (single-shift operation/power-on time) Iedpfxozuyqco Aavsba Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), functionality: fully functional, turning length: 230 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, The machine was manufactured in the 1990s. TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 210–230 mm Swinging diameter over bed: 190–200 mm Travel in X-axis: 125 mm Travel in Z-axis: 195 mm Ibsdpfxjzul Uys Aavja Spindle speed range: 6,000 rpm Spindle bore: 43 mm MACHINE DETAILS Machine weight: approx. 2,500 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Iedpfxozul T No Aavsba Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Ibjdpfx Aszul Tvoavja Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, turning length: 50 mm, turning diameter: 40 mm, spindle speed (max.): 8,000 rpm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Turning diameter: 40 mm Turning length: 50 mm Isdpfx Aszul Srsavoba Travel range X-axis: 180 mm Travel range Z-axis: 200 mm Rapid traverse rate X/Z-axis: 15 m/min Spindle speed: 8,000 rpm MACHINE DETAILS Control system: Fanuc 0i-TD Dimensions & Weight Footprint: approx. 1,500 × 700 × 1,600 mm Machine weight: approx. 1,500 kg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, turning length: 50 mm, turning diameter: 45 mm, travel distance X-axis: 180 mm, travel distance Y-axis: 200 mm, controller model: Mitsubishi FCA70LPC-V, TECHNICAL DETAILS Turning diameter: 45 mm Turning length: 50 mm Travel range X-axis: 180 mm Travel range Z-axis: 200 mm Rapid traverse X/Z-axis: 20 / 30 m/min Spindle speed: 8,000 rpm MACHINE DETAILS Control system: Mitsubishi FCA70LPC-V Isdpfx Aaozul R Uovoba Dimensions & Weight Machine weight: approx. 1,600 kg Footprint: approx. 1,700 × 700 × 1,700 mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 145 mm, turning diameter: 168 mm, travel distance X-axis: 130 mm, travel distance Y-axis: 110 mm, controller model: FANUC 31i-TA, TECHNICAL DETAILS Turning diameter: 168 mm Turning length: 145 mm X-axis travel: 130 mm Ibjdpezul Ruofx Aavea Z-axis travel: 110 mm Spindle speed: 45–6,000 rpm MACHINE DETAILS Control system: FANUC 31i-TA EQUIPMENT 2 × Portal clamping system 2 × Part chute for inspected parts 2 × 3-jaw chuck, SMW Autoblok, Type BHM 165, 152.4 mm (6 inches) SMW Autoblok hydraulic cylinder, Type SIN-S 100, left SMW Autoblok hydraulic cylinder, Type VNK 70/37, right Chip conveyor, discharging to the rear of the machine Air-controlled part clamping monitoring, right Part clamping monitoring, on both sides 4-position spindle orientation, on both sides Coolant injection in the chuck via Deublin rotary distributor, on both sides Automatic coolant pump with 200 l tank capacity 2 × 8-station turret Signal light with traffic light design Preparation for oil mist extraction Automatic machine shutdown Automatic central lubrication RS-232-C interface External transformer 10 × Boring bar holders 3 × Turning tool holders, right 3 × Turning tool holders, left Customer macro B Turning cycles

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 352016, Schaublin CNC lathe, type 140-CNC A2-4, in excellent condition. Specifications: - FANUC control 21i-TB - Maximum turning diameter over the bed: 300mm - Spindle speed: 50-6000 rpm - Maximum bore of the main spindle: 39mm - 12-position VDI turret with live tools - Machine dimensions: 2530x1400x1840mm - Weight: 3020kg Accessories: - Coolant system - Air filter system (mist collector) - 30 VDI 30 tool holders - 2 VDI 30 live tool holders - Various extras, see photos Iedpfszub Agsx Aavjba

Condition: good (used), Year of construction: 2012, Turning diameter: 168 mm Turning length: 145 mm Travel – x: 130 mm Travel – z: 110 mm Spindle speed: 45 – 6,000 rpm Rapid traverse X + Z axes: 18 / 24 m/min Rapid traverse X and Y axes: 24 m/min Equipment/Accessories: - CNC control FANUC 31i-TA - 2 x portal loading system - 2 x workpiece slides for inspected parts - 2 x 3-jaw chuck SMW Autoblok 6 inch, type BHM 165 - SMW Autoblok hydraulic cylinder type SIN-S 100 (left) - SMW Autoblok hydraulic cylinder type VNK 70/37 (right) - Chip conveyor (discharging to the rear of the machine) - Air-controlled workpiece positioning control (right) - Workpiece clamping monitoring (both sides) - 4-position spindle orientation (both sides) - Coolant injection in the chuck via Deublin rotary distributor (both sides) Ibjdpozt R U Aefx Aavsa - Automatic coolant pump (tank capacity 200 l) - 2 x 8-station turret - Signal light (traffic light design) - Oil-mist extraction preparation - Automatic machine switch-off - Automatic central lubrication - RS232 C interface - External transformer Tooling: - 10 x boring bars - 3 x turning tools (right) - 3 x turning tools (left) CNC functions: - Customer macro B - Turning cycles

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Control system: WINMAX (graphic, touchscreen) with USB port Max. swing over cross slide: 230 mm Max. turning diameter: 254 mm Distance between centers: 403 mm Spindle bore: D45 mm Chuck size: 160 mm Tool turret: 12-station Ibjdpezt Rgrsfx Aavsa Spindle speed: 6000 rpm Power: 15 kW Machine weight approx.: 3000 kg Dimensions approx.: 3000 x 2000 x 2000 mm Accessories, equipment: - Hydraulic tailstock - Coolant system - Integrated tool setter - Parts catcher - Machine light - Chip conveyor160 mm - Hydraulic 3-jaw chuck - Machine mounts - Machine manual

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Iodpfx Ajzt Iacsavjba Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Iedpfx Ajztyrqoavsba Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Ibodpfx Aajztyqyjvoa Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 3,000 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 30,000 W, total height: 2,240 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: Series 18T-C / 16T-C, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details. Working capacity: • Swing over bed: 700 mm Iodpfxsztyh Sj Aavjba • Swing over saddle: 480 mm • Recommended machining diameter: 315 mm • Maximum machining diameter: 460 mm • Maximum machining length: 1,050 mm • Draw tube diameter: 91 mmAxis travel: • C: 360° (indexing increment 0.001°)Main spindle: • Chuck diameter: 304 mm • Spindle nose: ASA A2-8 • Spindle bore: 102 mm • Front spindle bearing diameter: 160 mm • Spindle motor power: 22/30 kWTool turret: • Tool holder type: VDI 50 • External tool height: 25 mm • Maximum boring bar diameter: 50 mm • Turret indexing time: 0.25 sDriven tools: • Speed range: 30–3,000 rpm • Motor power: 3.7/5.5 kW • Maximum collet capacity: 25 mm • Maximum tapping capacity: M20Feed rates: • X-axis rapid traverse: 16,000 mm/min • Z-axis rapid traverse: 20,000 mm/min • X-axis feed motor power: 3.8 kW • Z-axis feed motor power: 5.0 kWTailstock: • Quill diameter: 120 mm • Quill taper: MT6 • Quill travel: 120 mmElectrical data: • Power requirement: 50 kVA • Coolant pump power: 0.24 kWFloor space: 3,890 × 2,390 mm Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2014, - Accessories included. - Control system: WEILER C3 based on Siemens SINUMERIK 840D WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Ijdpfx Aeztxq Esavsba Swinging diameter over cross slide 160 mm Distance between centers 750 mm TURRET Turret head DIN 55027/DIN ISO 702-3, size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60%/100% ED 9/7 kW Speed range 1 – 4,500 rpm Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Transverse 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force transverse 3,000 N Max. rapid traverse speed longitudinal/transverse 6/3 m/min THREAD CUTTING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 threads/inch TAILSTOCK Tailstock spindle diameter 50 mm Tailstock quill stroke 110 mm Internal taper DIN 228 MK 3 mm

Condition: used, GOODWAY GCL-2 LATHE FANUC O-T Series CNC Control Max. diameter, swing diameter: Ø 300 mm Maximum turning diameter, turning diameter: Ø 230 mm Standard turning diameter: Ø 220 mm Maximum turning length: 300 mm Turning length: 300 mm Maximum turning diameter: Ø 51 mm Maximum spindle bore diameter: Ø 66 mm Spindle mount: A2-6 Iodpfx Ajztq Ehsaveba Motor power (Continuous / 30 min.): 11/15 KW Maximum speed [rpm]: 4,500 rpm Maximum travel of the X-axis: 125 mm Maximum travel of the Z-axis: 320 mm Turret: 8 stations Machine dimensions: approx. 2480 x 1300 x 1635 [mm] Machine weight: approx. 3500 [kg].

Condition: good (used), Year of construction: 1996, functionality: fully functional, CNC lathe Weiler DZ 26 The machine has only ever been operated with oil! Year of manufacture: 1996 Control system: Sinumerik Equipped with driven tools and an FMB bar feeder. Ibjdoztl Haepfx Aavja Further details to follow.

Condition: good (used), Year of construction: 1996, functionality: fully functional, CNC lathe, Spinner TC 32 model, with bar feeder. Ibedpfx Aaeztl E Novea The machine has only been operated with oil. Year of manufacture: 1996 Control system: Sinumerik Further details will follow.

Condition: used, Year of construction: 2012, controller manufacturer: Mitsubishi, controller model: M70, _____ Description: Year of manuf. : 2012 Control : Mitsubishi M70 Turning length : 100 mm Mainspindle: Technology:Belt-driven spindle Speed:6.000 rpm Power (max.):7,5 kW Iodpfx Aasztifmevjba Torque (max.):60,8 Nm Barcapacity:42 mm C-Axis:0,001° Workpiececlamping:Collet chuck, Type 173E Subspindle: Technology:Belt-driven spindle Speed:5.000 rpm Power (max.):5,5 kW Torque (max.):38,7 Nm C-Axis:0,001° Workpiececlamping:Collet chuck Movement in X/Z:140/310 mm Rapid travers in X/Z:12 m/min Toolcarrier (X/Y/Z): Technology:Turret with 8 stations Tooldrive:5.000 rpm Movement in X/Y/Z:140/70/235 mm Rapid travers in X/Y/Z:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pump Rawmaterialfeed:Bar laoder, IEMCA Master 80 HF Finishpart removal:Part catcher with conveyorbelt Fire-extinguishing unit:Kraft + Bauer Further Equipment:Trafo

Condition: good (used), Year of construction: 2021, Turning center GILDEMEISTER/DMG Sprint 20-8 with DMG FANUC Series 32i Model B control, serial number 8104000418B, year of manufacture 2021, operating hours estimated by management at approximately 7,240 hours, chip conveyor, bar feeder FMB Turbo 2-20, serial number 21-301797, year of manufacture. Ibedpfxeztdhis Aavoa

Condition: good (used), Year of construction: 2001, INDEX ABC multi-spindle automatic lathe with INDEX control, serial number 401566, year of manufacture 2001, operating hours estimated at approximately 44,285 hours according to management, chip conveyor DGS, bar feeder FMB 5-42/322/A. Ibedpfx Aeztc Rvjavea

Condition: good (used), Year of construction: 1998, INDEX ABC multi-spindle automatic lathe with INDEX C 200-4 control, serial number 400923, year of manufacture 1998, operating hours estimated at approximately 52,924 hours according to management. Includes chip conveyor DGS and bar feeder FMB 5-42. Isdpeztc Rpofx Aaveba

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,716 h, travel distance X-axis: 260 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 3,450 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, product length (max.): 2,800 mm, number of axes: 3, This 3-axis EMCO Emcoturn 65 was manufactured in 2019. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine offers an impressive X-axis travel of 260 mm and Z-axis travel of 610 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 65 horizontal turning machine we have for sale. Contact us for further details. Ibedpfx Aaoztc Rcovja • Number of spindles: 2 • Spindle motor power: Main spindle: 17 / 22 kW; Counter spindle: 11 / 16.5 kW • Spindle speed range: 60 – 5000 rpm • Spindle bore: Ø73 mm • Number of tool slots: 12 • Rotating tools: yes • Lubrication tank: 10 l • Pump drive power: 0.57 / 2.2 kW • Air pressure: 6 bar • Cooling pressure: 3.5 bar (optional 14 bar) • Air supply: 5 l/min • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle spindle nose: A2-6 • Main spindle bearing Ø: 105 mm • Main spindle torque (40% DC): 305 Nm • Max. chuck size: Ø250 mm • Counter spindle torque (40% DC): 80 / 125 Nm • Counter spindle spindle nose: A2-6 • Counter spindle max. chuck: Ø200 mm • C-axis resolution: 0.001° • Turret type: VDI30 • Turret max. speed: 5000 rpm • Turret max. power: 6.7 kW • Turret max. torque: 25 Nm • Turret indexing time: 0.2 s • Rotary tools: VDI30 • Rotary tools speed: 0 – 5000 rpm • Rotary tools torque: 25 Nm • Rotary tools power: 6.7 kW • Coolant system tank capacity: 230 l • Coolant system flow rate: 15 / 65 l/min • Hydraulic unit max pressure: 50 bar Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, spindle bore: 44 mm, spindle speed (max.): 6,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 406 mm, spindle nose: A2-5, Equipment: documentation/manual, The Haas ST Series high-performance turning centers were designed from the ground up to offer setup flexibility, exceptional rigidity, and high thermal stability. The ST-10 boasts an extremely compact footprint while still providing a generous working area. Extremely compact footprint Ibsdpfxsztacps Aavja High spindle speed and rapid traverse rates Ideal for high-volume, high-production environments

Condition: good (used), Year of construction: 1998, Weiler E30 CNC lathe Dimensions, width: 1200 mm Dimensions, depth: 1800 mm Dimensions, height: 1700 mm Machine weight: 1300 kg Spindle bore: 42 mm Workpiece depth over the bed: 330 mm Multifix holder B installed Fixed steady rest (optional), clamping range: 15-100 mm Traveling steady rest (optional), clamping range: 10-85 mm Collets from 3-28 mm (in 0.5 mm increments) Tailstock with MK3 chuck Drive power 100% / 60% duty cycle: 9/11 kW Max. torque on the spindle: 180 Nm Total speed range: 1-4500 min⁻¹ Feed drive: Three-phase feed drives Feed range, longitudinal: 0-20 mm/rev Cutting speed, longitudinal/facing: 10/7.5/5/3.5 m/min Tailstock quill diameter: 50 mm Quill travel: 110 mm Internal taper of the quill: MK 3 Swinging diameter over the cross slide: 160 mm Bed width: 240 mm Travel of the cross slide: 180 mm Length of the bed slide guide: 395 mm Ijdpfx Aaozr Uc Ujvjba Cross-section of the cutting tool (height/width): 20 x 20 mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing: 70 mm Internal taper of the main spindle: MK 5 Workpiece: Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: 0.125 - 28 mm DP thread range: 1-224 G/" Number of threads max.: 50