Bitzer Kühlmaschinenbau GmbH

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 55,000 h, overall weight: 7,300 kg, Equipment: safety light barrier, TRUMPF TruBend 5085 (B03) Lajdpez Dgv Ujfx Apdeg Year of manufacture: 3/2017 Press force: 850 kN (85 tons) Machine operating time: 55,000 hours, hydraulic operating time: 14,000 hours, press beam operating time: 2,300 hours, crowning operating time: 200 hours. Control system: TASC 6000 Configuration: 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping BendGuard Additional lighting for the front and rear working areas.

Condition: excellent (used), Year of construction: 1984, Retrofit completed in 2023. Laedpjz A S U Hefx Apdeg Performed on an 80-ton x 10-meter press brake.

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Press force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS with back gauge Weight 8800 kg Lodpjz A Ia Sjfx Apdeag without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are probably lost.

Condition: good (used), Year of construction: 2004, Well-maintained, used press brake from Ermaksan. Type: AP 2600 80 Capacity: 2600 x 80 tons NC control Laedpsz Aihmefx Apdog Includes a set of tooling.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), pressing force: 80 t, stroke length: 150 mm, total length: 3,180 mm, total width: 1,250 mm, total height: 2,450 mm, overall weight: 6,000 kg, Equipment: documentation/manual, Accessories: 3 x bending prism, 3 x top beam, several bending segments, backstop, stroke counter, manual night operation. Technical parameters: Rated force 800 kN, Working table length 2500 mm, Table width 160 mm, Ram speed: downward 50 mm/s, pressing 10 mm/s, upward 100 mm/s, Maximum ram stroke Z 150 mm, Distance between side frames B 2050 mm, Overhang A 250 mm, Maximum opening height H 380 mm, Parallel ram stroke accuracy 0.1/1000 mm, Working fluid pressure 24 MPa, Electric motor power: main 5.5 kW, Machine dimensions: length (with cabinet) 3180 mm, width 1250 mm, height 2450 mm, Machine weight 6000 kg. The machine can be tested in our warehouse in Přerov by arrangement. Lsdpfxjzzffrs Apdjag

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Lasdpfezwcl Ujx Apdjg Weight: approx 4 T

Condition: good (used), functionality: fully functional, CNC bending machine CTO 80/2500 Ledpfxjzurxfs Apdsag

Condition: used, Year of construction: 2021, power: 21 kW (28.55 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 300 mm, table length: 3,100 mm, ram plate length: 3,100 mm, total length: 4,350 mm, total width: 2,040 mm, total height: 2,515 mm, overall weight: 5,900 kg, Morgan Rushworth XPE CNC 3100/100 electric press brake in excellent condition. The machine has been used in our steel fabrication workshop and has completed relatively low operating hours. It has been well maintained and was recently serviced by the manufacturer. The press brake is fully operational and can be inspected and demonstrated under power prior to purchase. Lodpfxszr Ngbo Apdeag Specification: Year of manufacture: 2021 Pressing capacity: 100 tonnes Bending length: 3,100 mm Maximum stroke: 300 mm Nominal power: 21 kW Electrical supply: 400 V, 50 Hz, three-phase Machine weight: 5,900 kg Overall dimensions: 4,350 × 2,040 × 2,915 mm Serial number: B 28015 The machine is available for inspection by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 80 t, stroke length: 120 mm, table length: 2,500 mm, throat depth: 250 mm, distance table to ram: 385 mm, clearance between the columns: 2,000 mm, oil tank capacity: 160 l, total length: 2,600 mm, total width: 1,450 mm, total height: 2,300 mm, overall weight: 4,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic CNC Servo Press Brake MTP 80X2500 with MTP-3212 Controller – In Stock The MTP 80X2500 is a hydraulic CNC servo press brake designed for accurate and efficient sheet-metal bending. The machine delivers a pressing force of 80 tonnes and offers a maximum working length of 2,500 mm. It is suitable for processing sheet metal up to 4 mm thick. The machine is equipped with two controlled axes: * X-axis – servo-controlled back-gauge positioning * Y-axis – servo-controlled ram movement The MTP-3212 CNC controller features a large colour touchscreen and a clear, intuitive operating menu. Its software automatically calculates the required bending angle, helping simplify machine setup and improve production efficiency. The controller can store data for up to 40 different punch types. The machine is fitted with an AMADA-style quick-clamping system, enabling fast and convenient tool changes. Two front material supports are included. High-quality components ensure reliable operation and a long service life. The hydraulic system uses a renowned German Rexroth valve, while the electrical system incorporates Schneider components. Safety components are supplied by Omron and Schneider. Steel hydraulic connections help minimize the risk of leakage. For comfortable operation, the press brake is equipped with a mobile control unit and a controller mounted on an adjustable arm. Integrated LED lighting provides excellent visibility throughout the working area. The machine includes extensive safety equipment, such as side guards, a rear safety gate, easily accessible emergency-stop switches and a safety light barrier. The light barrier helps prevent accidental access to the area between the punch and die during operation. A Polish-language operating manual and a CE declaration of conformity are included. Technical support is also available to assist with tooling selection, material selection, bending sequences and the configuration of suitable operating parameters. Technical specifications: * Pressing force: 80 t * Maximum working length: 2,500 mm * Maximum sheet thickness: 4 mm * Controlled axes: X and Y * Distance between columns: 2,000 mm * Throat depth: 250 mm * Ram stroke: 120 mm * Maximum opening height: 385 mm * Back-gauge travel: 600 mm * Motor power: 5.5 kW * Overall weight: 4,800 kg * Dimensions (L × W × H): 2,600 × 1,450 × 2,300 mm * Front material supports: 2 * Punch clamping: AMADA-style quick-clamping system * CNC controller: MTP-3212 * Safety light barrier: Yes * CE marking: Yes * Documentation: Polish-language operating manual The machine is currently in stock and available for prompt dispatch. Ledpfxozrl Nlj Apdjag Delivery can be arranged throughout Europe and to destinations beyond Europe. Transport costs are calculated individually and depend on the delivery destination. Please contact us with your delivery address or postal code to receive a transport quotation.

Condition: excellent (used), Year of construction: 2009, Year of manufacture: 2009. Bending length: 3100 mm. Pressing force: 160 tons. Maximum sheet thickness: 6 mm, with a material strength of 45 kg/mm². Serial number: SN20090122. Ljdpfx Aezq Aq Depdsag Country of manufacture: Great Britain.

Condition: used, Year of construction: 2010, Technical details: pressure: 80 t chamfer lenght: 2500 mm distance between columns: 2125 mm Laodpfx Apjzpaqfodog max. ram stroke: 200 mm plate thickness: 6 mm total power requirement: 9 kW operating pressure: 275 bar throat: 420 mm ajustment speed: 100 mm/s working feed: 10 mm/s weight of the machine ca.: 5,8 t dimensions of the machine ca.: 3,8 x 2,4 x 2,95 m NC pressbrake, controlled axis: Y1, Y2, X1, R with toolcabinet incl. accessories, barely used! *

Condition: excellent (used), Year of construction: 2014, operating hours: 443 h, Model Amada HFE MK2 80 x 2500 , 4 axis Hydraulic Downstroking Press Brake VERY LOW HOURS 443 Year 2014 Lsdpfx Apjzmtqajdoag Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, Year of construction: 1995, machine/vehicle number: 1453G, functionality: fully functional, operating hours: 71,614 h, pressing force: 80 t, stroke length: 340 mm, table width: 2,550 mm, table length: 2,550 mm, overall weight: 7,800 kg, A YouTube video demonstrating the operation is available! We offer this used Weinbrenner GP 80-2550 press brake for sale. The control system was upgraded to a Cybelec VisiTouch Pac in 2023. The press brake is in good condition, well-maintained, and currently still in production. Over the years, various components have been renewed (drive motor, belts, guides, rear stop fingers, compressed air lines, etc.). The machine received service from B+Z in 2026. A large amount of tooling is included. 2 upper tool sets and 1 lower tool set (3V die) have been re-sharpened by UKB; invoices are available. The machine has UKB adapter strips in the lower tool, allowing the use of lower tools with the Trumpf system. A laser angle measurement system from Data M Engineering (Laser Check) has been installed on the machine. Upon purchase of the machine, the buyer will receive comprehensive training on its operation. The machine is being sold because we have had a second Weinbrenner with a 3m bending length for a year. This became necessary because a flatbed laser with a 3m processing length was also acquired a year ago. Since we now need the space of the old press for final assembly, it is being sold. Location: 82538 Geretsried Equipment: - Factory number: 1453G - Year of manufacture: 1995 - Working width: 2550mm - Controlled axes: Y1, Y2, Z1, Z2, X, X1, R, 2x bending assist, crowning, die shift - Hydraulic ram clamping - Hydraulic die clamping - 2 bending assists - Control system upgrade to Cybelec VisiTouch Pac in 2023 - Weight: 7800 kg - Press force: 80 tons - Ram stroke: 340 mm If you have any questions or need more information, please send us a message or call us. Lsdpszmmwtefx Apdeag

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 85 t, stroke length: 445 mm, overall weight: 8,600 kg, operating pressure: 300 bar, control voltage: 24 V, TECHNICAL DETAILS Control system: TASC 6000 Pressing force: 850 kN Stroke: 445 mm Operating pressure: 300 bar Lajdpfx Apszlc Ryjdog Follow-up time: 95 ms Follow-up travel at 220 mm/s: 10 mm Follow-up travel at 160 mm/s: 8.5 mm Equipment: 4-axis rear stop, bending aid MACHINE DETAILS Safety clearance: 190 mm Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V Compressed air connection: 6 bar Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,500 x 2,000 mm Machine weight: 8,600 kg Note: The operating hours can be found in the last image.

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: A10587, functionality: fully functional, pressing force: 80 t, stroke length: 200 mm, throat depth: 250 mm, controller model: Cybelec DNC 30, distance between stands: 2,050 mm, TECHNICAL DETAILS Pressing force: 80 t Bending length: 2,550 mm Frame width: 2,050 mm Table width: 240 mm Maximum stroke: 200 mm Overhang: 250 mm Installation height: 450 mm Stroke speed - downwards, unloaded: 100 mm/s Stroke speed - pressing, loaded: 12 mm/s Stroke speed - upwards, unloaded: 105 mm/s MACHINE DETAILS Control system: Cybelec DNC 30 Laodszk E Acspfx Apdeg Oil capacity: 250 l Machine weight, approx.: 8,000 kg

Condition: like new (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 365 mm, table length: 2,100 mm, clearance between the columns: 540 mm, overall weight: 9,050 kg, Equipment: CE marking, safety light barrier, The following 2 metre Trumpf press brake featuring the specific extended daylight configuration. The machine is in exceptionally clean, near-mint condition. This is largely because it is being sourced from an immaculate, highly regulated factory that manufactures components exclusively for the medical sector. Used Trumpf V series cnc pressbrake for sale Laodpfx Apjzfp D Tedog Trumpf v85 2m x 85ton – 4axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Model: v85 Year: 2001 Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Crowing Complete with: • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 2axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition Delivery to your works, installation and tuition with your operators available.

Condition: ready for operation (used), Year of construction: 2019, pressing force: 82 t, stroke length: 300 mm, overall weight: 7,000 kg, number of axes: 4, This full electric drive SAFAN E-Brake Premium 80-2550 was manufactured in 2019. It features a pressing force of 80 tons and a bending length of 2550 mm, ensuring robust performance for various applications. The machine is equipped with a maximum stroke of 300 mm and a backgauge with 4 fingers for enhanced precision. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake Premium 80-2550 press brake we have for sale. Contact us for further details. • Power supply: 3 x 400 V, 50/60 Hz, N/PE • Connected load: 11 kW • Axis configuration: 4 CNC axes (Y1, Y2, X, R) • Manual Z-axis adjustment • Backgauge with 4 fingers • Condition: Very good, fully operational, regularly serviced and maintained Lajdpfszd Uv Ssx Apdsg • Note: Tooling is not included • No crowning needed • Manual, quick-release tool clamping system Promecam Advantages • Full electric drive • Up to 30% higher productivity • Up to 50% energy saving • No harmful hydraulic oil, low CO2 emissions • Noiseless operation • Full working length backgauge Technical Specification Bending Length 2550 mm

Condition: used, Year of construction: 2005, Max. pressing force 80 t Max. length 2500 mm Stroke 200 mm Machine weight 5750 kg Ledpfx Aozdf D Uspdsag

Condition: excellent (used), Year of construction: 2000, AMADA PROMECAM MODEL HFE 8025 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE description TYPE HYDRAULIC DOWNSTROKING CAPACITY 80 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2500 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V000426 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC Lajdpfxezbzq Ss Apdjg SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2000 price POA

Condition: excellent (used), Year of construction: 2001, Technical specifications: Working length: 2050 mm Distance between uprights: 1750 mm Press force: 85 tons Control system: DELEM DA65A Adjustable back gauge Axes: Y1/Y2; X; R; Z1/Z2 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Power: 11 kW Hydraulic tool clamping, top and bottom: WILA system CNC-controlled crowning I-axis: pneumatic die shifting ACB angle control system CE marking Dimensions (length x width x height): approx. 2200 x 2750 x 2900 mm Weight: approx. 9.5 tons Ljdozbuc Iopfx Apdsag Condition: Very good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are commensurate with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1996, pressing force: 85 t, stroke length: 365 mm, overall weight: 9,050 kg, Equipment: documentation/manual, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V85 Year of manufacture: 1996 Technical data Manufacturer: Trumpf Type: TrumaBend V85 Year of manufacture: 1996 Press force: 85 t Lajdpfeza Hxrsx Apdeg Operating hours: 46927 h (metered) Bending length: 2050 mm Stroke: 365 mm Stand distance: 410 mm Motor power: 10 kW Dimensions: approx. L 2.70 x W 2.40 x H 2.40 m Weight: approx. 9050 kg Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC-controlled crowning system • 2D graphics control DELEM DA • Hydraulic tool clamping, top and bottom • Pneumatic die shifting All information is provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: Numer fabryczny maszyny B0503A0341, functionality: fully functional, operating hours: 29,000 h, For sale, a used TRUMPF TruBend 5085 edge bending machine, manufactured in 2009. Laodpfx Aoy Tluyepdjg The machine is in unique technical condition – very good! The machine has a low number of operating hours – 8250. In 2020, the control system was replaced with a new one at an operating hour count of 20500. The actual total operating hours of the machine are 29000. Machine serial number: B0503A0341 Hydraulics: Hoerbiger Year of manufacture: 2009 Maximum pressing force: 850 kN Working length: 2720 mm Opening: 415 mm, Throat: 420 mm Power: 17 kW Voltage: 400 V Hydraulic oil tank capacity: 120 l Hydraulic system pressure: 300 bar Weight: 7800 kg Tool type: hydraulic Wila / Trumpf Control system: TASC 6000 - Upper drive in a four-cylinder version Y1/Y2 - 4-axis back gauge - X, R, Z1, Z2 Hydraulic upper tool clamping system WILA Hydraulic lower tool clamping system WILA CNC crowning BendGuard Preparation for ACB

Condition: used, Year of construction: 1993, Used 3 meter CNC press brake by Safan Model: CNCL 80 3100 Capacity: 3100 x 80 tons Lodpfx Apsy Nydzedeag Y1, Y2, and X axes CNC controlled CNC crowning Flat pressure table Year of manufacture: 1993

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 215 mm, throat depth: 410 mm, clearance between the columns: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Frame gap: 1,750 mm Stroke: 215 mm Throat depth: 410 mm Controlled axes: y1, y2, x, R MACHINE DETAILS Control manufacturer: DELEM Total power: 13 kW Dimensions & Weight Dimensions (L x W x H): 3,190 x 2,100 x 2,375 mm Machine weight: 8,750 kg EQUIPMENT Two-hand foot operation 2 support arms Crowning Die shifting Lodpfx Aey Ix Ipjpdoag CNC control Side safety doors 2 manual backgauge fingers

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, operating hours: 70,104 h, pressing force: 81 t, total length: 3,100 mm, total width: 2,180 mm, total height: 2,540 mm, overall weight: 5,750 kg, working width: 2,550 mm, Equipment: emergency stop, We offer this ready-to-use Amada HFBO 80-25 press brake, year of manufacture 1999. Lodpfxsy H Eqbo Apdjag If you have any questions or need further information, please feel free to send us a message or give us a call. The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.