Alfa Renovierung GmbH

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: - Motor 400V-50Hz-3Ph, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminum guide rail with 4 stops (2 profiles on the right/left, 1500mm each) - with quick-release chuck - 2 patented, fail-safe pressure clamping cylinders - Connection for dust extraction system in accordance with EC standards - Drilling bar made of aluminum, spindle spacing 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head swivel with locking in each position between 0° - 90° - Foldable side stops with fine adjustment via dials with decimal display - Drilling height adjustment via dials with decimal display - Rear stop, travel up to 300 mm - Fixed stops 37 mm for inserting dowel pin drills - Complies with EC standards - max. drilling width 704 mm - max. drilling depth 65 mm - max. workpiece width 960 mm Fpodpfxjzk N S Uo Afpji - max. workpiece length 3000 mm - max. workpiece thickness 60 mm Availability: short-term Location: 63934 Röllbach Condition commensurate with age.

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Equipment and technical data: - For drilling construction holes, horizontally and vertically - For drilling rows of holes vertically in a 32 mm grid - Vertical drilling unit with a double-spindle drilling head, freely positionable on an indexing table - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm Fedpfxszk N Dwe Afpspi - Drilling heads with pneumatic feed - Pneumatic material clamps - Through-width approx. 850 mm - Includes various stops and drill bits Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Universal radial drill with a pivoting drilling unit with fully automatic control with 2 safety-type pneumatic chucks Drilling head motor 2.2 kW with 21 spindles Spindle spacing 32 mm with integrated oil damping Vertical adjustment 80 mm Fpsdpfx Afezk N A Topji Drilling depth 80 mm Weight 420 kg Availability: short notice Location: Röllbach in age-appropriate condition

Condition: used, Used machine Equipment and technical data: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm Fpodjzk N Atepfx Afpsi - with drilling bar, drive motor 3 HP, 2800 rpm - 23 drilling spindles, drilling spacing 32 mm - pneumatic workpiece clamping via foot valve - 2 stop rails 1000 mm - with chassis Availability: short notice Location: 63934 Röllbach in accordance with its age

Condition: used, Used machine Condition: commensurate with age For efficient dowel hole drilling in longitudinal and transverse moldings for frame doors, door panels, drawer parts, and all types of crossbars 3-spindle motor Spindle spacing 25/25 mm Stroke, max. 80 mm Motor, 1.5 hp Support table 260 x 130 mm Fpedozk Ny Sopfx Afpoi Height adjustment from 5-40 mm, with scale With swiveling, folding stop Foot valve control North Rhine-Westphalia commensurate with age

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Universal radial drilling machine with a swiveling drilling head with fully automatic control with 2 safety pneumatic chucks Drilling head motor 2.2 kW with 21 spindles Spindle spacing 32 mm with attached oil damping Vertical adjustment 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Weight 420 kg Availability: short notice Location: Flörsheim Fodpfx Afjzk Nuvepepi in age-appropriate condition

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Fpodpfx Afozk Nuiopei Equipment and technical data: - Number of drilling spindles: 21 pcs. with 32 mm spacing - Drilling direction: from below and from the end face - Swivel range: 0-90 degrees, adjustable by handwheel - Pneumatic material clamps: 3 pcs. - Through-passage: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Diameter of dust extraction: 120 mm - Includes a variety of stops (see pictures) Availability: short-term Location: Röllbach in accordance with its age

Condition: used, Used machine for dowel drilling in the side or end face with roller-bearing drill shaft with conical claw coupling driven by any hand drill working width 650 mm with 7 drill shafts swiveling drill bar 0° - 45° - 90° clamping height 80 mm smallest hole spacing 30 mm Availability: short-term Location: Flörsheim condition according to age Fpjdpfx Afjzk Nq Djpji

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: Fpodpfxozktq Is Afpei - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: good (used), functionality: fully functional, For sale is a robust SF Scheer dowel hole drilling machine in a heavy-duty industrial design. The machine is ideally suited for the precise production of dowel holes in the furniture and interior design industries, as well as in professional window and door construction. Thanks to its solid cast iron construction, the machine operates with extremely low vibration and high precision. The horizontal drilling unit features 3 drilling spindles with a 32 mm spacing, making it optimally suited for dowel connections using the proven 32 mm system. Technical specifications Manufacturer: SF Scheer Machine type: Dowel hole drilling machine Number of spindles: 3 Spacing: 32 mm Stroke: 8 mm Motor power: 1.1 kW Voltage: 400 V Fedpsziz S Refx Afpepi Heavy-duty industrial design Equipment 3-spindle drilling unit 32 mm drilling pattern Precision work table Adjustable stop Adjustable drilling depth Pneumatic maintenance unit with pressure regulator and water separator Robust cast iron construction Mechanical operation 400 V high-voltage connection Scope of delivery SF Scheer dowel hole drilling machine Stop system Pneumatic maintenance unit Tool wrench as shown in the photos The machine is in a well-maintained, used condition with the usual signs of wear and tear. The sliding and support surfaces are in good condition, and the machine generally makes a solid impression. It is ideally suited for daily professional use. Inspection and test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information is without guarantee.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0-253-05-4317, workpiece height (max.): 60 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, controller model: Powercontrol PC85T mit Woodwop software, TECHNICAL DETAILS Process: horizontal drilling – injecting adhesive – driving in dowels Workpiece length min/max: 20 mm / 1,250 mm Workpiece width min/max: 50 mm / 800 mm Workpiece thickness min/max: 10 mm / 60 mm MACHINE DETAILS Control system: Powercontrol PC85T with Woodwop software Dowels: 8 mm x 30 mm, 8 mm x 35 mm Voltage: 400 V Frequency: 50 Hz Phases: 3-phase EQUIPMENT Drilling unit: 1 drilling and dowel insertion unit, freely programmable Fpjdpfxjzhm Sgj Afpji Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical clamping cylinders Double diaphragm pump 1:1

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Fsdpfxezgh Tve Afpepi Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Number of upper units: 4 With positioning via NC: yes Lateral horizontal groups: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for horizontal drilling: 12 Fpedpezf Ibwjfx Afpei MACHINE DETAILS Control: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8649

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 2,670 mm, total length: 5,000 mm, type of input current: three-phase, overall weight: 2,750 kg, workpiece height (max.): 50 mm, Gannomat Matrix 250/70 We offer this used, CNC-controlled multi-spindle boring, gluing, and dowel inserting machine, manufactured in 2003. Manufacturer: Gannomat Model: Matrix 250/70 Year of manufacture: 2003 - Suitable for flat surfaces up to a diameter of 35 mm - Suitable for end surfaces: drilling 6, 8, 10, 12 mm, gluing and inserting with a diameter of 8 mm, - Dowel length from 25 to 60 mm - X-length: 2,500 mm - Y-length: 700 mm - Maximum workpiece thickness: 50 mm - Includes miter stop - A 4-zone layout is possible with a center stop - Includes 16 suction cups and 8 clamps, as shown in the pictures - Includes vacuum pump - Simple programming directly on the machine, Fedpfozcf Udox Afpspi drilling of left and right parts is easily possible without the need for extra programming; during operation, it only needs to be positioned against the respective stop The machine is currently still in use. However, we only use it as a pure drilling machine and do not use the dowel inserting and gluing functions. An inspection can be arranged upon request. If you have any questions or require more information, please feel free to send us a message.

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Fpodpozbunkofx Afpsi Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: used, Year of construction: 2005, functionality: fully functional, New in the offer SCM MB 21 / HOLZKRAFT TECNOMAX MB21 Multi-spindle drilling machine Table width: 905 mm Maximum drilling stroke: 60 mm Drilling spindles: 21 Drill spacing: 32 mm 2 parallel stops Pneumatic tilting drilling block Pneumatic workpiece clamping Pneumatic clamping: 3 Workpiece support: standard table Drilling depth adjustment: turret-type stop Conformity marking: CE mark Weight: 267 kg Space requirements: Length: 1 m Space requirements: Width: 1.1 m Space requirements: Height: 1.3 m Fodpezaddfofx Afpjpi

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: Well-maintained/Functionally tested Equipment and technical data: Number of drilling spindles: 21 pcs. with 32 mm spacing Drilling direction: Bottom and end face Swivel range: 0-90 degrees, manually adjustable Fjdpfx Ajy Tczkefpspi Pneumatic material clamps: 3 pcs. Passage: Max. 100 mm in height and max. 640 mm in width Motor: 1.5 kW Dust extraction diameter: 120 mm Includes a variety of stops (see pictures) Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and technical specifications: - Motor 400V-50Hz-3Ph, 1.5 kW - Pneumatic single-head boring machine with 23 spindles - Aluminum fence with 4 stops (2 profiles each right/left, 1500 mm each) - Equipped with quick-change chuck - 2 patented accident-safe pneumatic clamping cylinders - Connection for dust extraction unit according to EU standards - Aluminum boring beam with spindle spacing of 32 mm - Worktable made of MDF and cast iron - Patented spiral system for fine adjustment of drilling depth - Pneumatic drilling head swiveling with lock at any position between 0° – 90° - Foldable side stops with fine adjustment via mechanical counters with decimal display - Drill height setting via mechanical counters with decimal display - Rear fence, travel up to max. 300 mm - Fixed stops at 37 mm for insertion of concealed hinge drill bits - Complies with EU standards - Max. drilling width: 704 mm - Max. drilling depth: 65 mm - Max. workpiece width: 960 mm - Max. workpiece length: 3000 mm Fedpjy Si Aljfx Afpspi - Max. workpiece thickness: 60 mm Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Fpsdpfx Afsy Ih Skepei Equipment and technical data: complete in standard version with: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blowing, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length 1300 mm, travel speed max. 105 m/min - Z-axis manually adjustable via mechanical digital counter, position via support table 5-40 mm - Dowel insertion overhang of 7-20 mm adjustable via mechanical digital counter, drilling depth of 0-35 mm (with drill length overall 70 mm) is automatically adjusted with insertion overhang - Closed gluing system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing the gluing system with: 1 stainless steel container for 7.5 kg of glue and 7.5 liters of water - Control lamp for glue residue level indicator in the glue container - 1 left-hand side stop, 1 right-hand side stop, and 1 center stop (all removable) - 4 start buttons for individual operation with 1-4 workpieces - 4 pneumatic angled clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 dust extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Industrial PC installed, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" touchscreen capacitive, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphic workpiece display, parametric programming, 0-point offset, programmable work lists, error diagnosis with plain text Special equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm), travel speed max. 30 mm/sec - 1 single-spindle vertical drilling unit drilling from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length overall 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) - 4 vertical angled clamping cylinders 10° with holder - 1 keyboard with holder Availability: by arrangement; currently being overhauled at the Ganner plant Location: Austria

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Drilling machine with automatic angle adjustment Fpsdpfxoy Iaizs Afpoi

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 896 mm Boring depth max. 65 mm Motor output 2x1,5 kW Overall size 1122x1040x1250 mm Fpodpfx Afjy Ehz Hopei Weight 380 kg Number of boring spindles 29 St.

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 704 mm Boring depth max. 70 mm Motor output 1,5 kW Fpjdpfx Asy Ehzgsfpji Weight 310 kg Number of boring spindles 23 St.

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 1088 mm Fodjy Ehyvopfx Afpopi Boring depth max. 85 mm Motor output 2x1,5 kW Overall size 1320x1040x1250 mm

Condition: good (used), Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left Fpjdsy Eg T Uopfx Afpei 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating system – Programming of manual and automatic anuba inserting – Inserting of single, anuba – Step by step execution Installed electrical power 7,62 Kw Compressed air 6-7 atm Machine Overall dimensions m 4400 x 1600 x 1600 h Weight kg 1650 Electrical cabinet overall dimensions mm 1050 x 550 x 1100 h Weight kg 390

Condition: used, Year of construction: 1996, Drilling head with 21 spindles, pitch 32 mm, working width: 640 mm, portal passage: approx. 750 mm, drilling stroke: 100 mm, positional adjustment of the drilling unit: 0-45 mm, positional adjustment of the hole pattern: 0-300 mm, spindle speed: 2800 rpm, shank diameter of the drill: 10 mm, clamping height of the workpieces: max. 100 mm, motor: 1.5 kW, working height: 850 mm, compressed air connection: 6 bar, weight: approx. 400 kg. Location: Nattheim. Fpjdpfx Afoy Dd I Hepji