Maschinenhandel-Kulms

Condition: used, Scharmann drilling machine Bljdpfx Aozilmrjmnsi Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Transverse (Z): 1,150 mm Spindle speed: 20 – 6,000 rpm Table size: 1,200 × 1,400 mm Table load capacity: max. 6 t

Condition: used, Year of construction: 2011, BRUSA & GARBOLI FORUS Bledpfszhxwhsx Amnei

Condition: used, functionality: fully functional, MASCHIATRICE A PATRONA usata, FAMUP (SERRMAC) MDR16.MASCHIATRICE A PATRONA, SERRMAC CON IMPIANTO REFRIGERANTE PIEDISTALLO E VASCA, USATO. Bledpfx Amezht Izenoi

Condition: excellent (used), - Digital display. - Various recordings. Work area Travel range along the X-axis: 450 mm Travel range along the Y-axis: 260 mm Quill travel along the Z-axis: 120 mm Travel range of the machine head along the W-axis: 450 mm Rapid traverse rates XY: 1,500 mm/min Work area Clamping surface L x W: 770 x 320 mm Blsdpfezg T Huex Amnoi Table (KS 321) Tool quick-change system: SF 32 Working spindle Speed range (stepless): 50 – 9,200 rpm Dimensions Footprint (width x depth x height): 1500 x 1480 x 2330 mm Weight Weight approx. 1,300 kg

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm Bsdpfxezg H H Ue Amneli 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Bedezg H H Ispfx Amneli Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: new, Year of construction: 2026, functionality: fully functional, Table dimensions: 730 x 210 mm Blsdpfxozg Hfwe Amnji Number of T-slots: 3 Drilling capacity in cast iron/steel: Ø 25 mm / Ø 30 mm Max. face mill diameter: Ø 76 mm Max. end mill diameter: Ø 20 mm Table longitudinal travel: 500 mm Table cross travel: 210 mm Spindle taper: Morse taper 3 Spindle stroke: 120 mm Spindle speed range: 100 – 2080 rpm Max. distance spindle nose to table: 440 mm Motor power: 1.5 kW Weight (Net/Gross): 280 / 310 kgs Packaging dimensions: 950 x 760 x 1150 mm Equipment, Accessories - Sheet metal base - Coolant system with tank and pump - Tapping function - Machine light - Automatic feed and rapid traverse on table longitudinal travel

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 14008455, Fehlmann Picomax 54 model with Heidenhain TNC 320 control, in very good condition. Technical specifications: - Year of manufacture: 2008 - Travel in X, Y, and Z axes: 500/260/480 mm - Travel of the drilling spindle: 160 mm - Table dimensions (L x W): 880 x 320 mm - Maximum table load: 250 kg - Distance from table to spindle nose: 0 - 605 mm - Feed rate in X/Y: 1 - 2000 mm/min Bljdpfxjzgwiys Amnji - Feed rate in Z: 1 - 1200 mm/min - Rapid tool change system: SF 32 - Spindle speed range, infinitely variable: 7100 rpm - Machine dimensions (W x D x H): 1850 x 2550 x 2400 mm - Weight: 2150 kg Accessories: - Heidenhain TNC 320 control - 4th axis with tailstock and Rohm 140mm 3-jaw chuck - Various holders - Microscope - Heidenhain probe - Machine lamp - Cooling system

Condition: excellent (used), functionality: fully functional, EMERSON DRILLING AND MILLING MACHINE MODEL 40 TC CROSS TABLE USED MACHINE, IN WORKING CONDITION Bsdozfpynopfx Amnjli INTERNAL CODE: SVR 413

Condition: new, Year of construction: 2026, CORMAK ZX 7055 VARIO Milling and Drilling Machine Main Advantages Rigid cast iron base and column – ensures stability when machining demanding workpieces, reduces vibration, and extends tool life. Variable spindle speed control in two ranges: 75–438 rpm (low range) and 438–2500 rpm (high range) – allows optimal parameter selection according to tool diameter and material type. Automatic spindle feed – provides consistent cutting performance and reduces the risk of drill breakage during deep-hole drilling. Tapping function – once the preset thread depth is reached, the spindle automatically switches to reverse rotation. Ground gears – ensure smooth and quiet gearbox operation with stable spindle torque. Dovetail guideways on all axes – provide precise table movement and reliable machine geometry. Swiveling head ±90° with height adjustment – facilitates chamfering, undercutting, and angular machining operations. Forward and reverse spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively dissipates heat during machining, prevents overheating of both the tool and workpiece, and improves machining accuracy and tool life. Standard Equipment Variable spindle speed control Electrically powered spindle head height adjustment Coolant system Technical Description Heavy-Duty Cast Iron Construction The robust cast iron construction forms the foundation of the machine’s durability and precision. The ZX 7055V DRO milling and drilling machine maintains excellent stability even during the most demanding operations. The machine features continuously variable spindle speed adjustment in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Large Cross Table with Precision-Ground Surface Bodpfxjzd R Eis Amnoli Attention to detail is a key design feature. The large cross table with a precision-ground surface ensures excellent flatness, resulting in highly accurate machining. Dovetail Guideways Innovative dovetail guideways provide smooth and precise movement along all three axes, enabling outstanding machining results without compromise. Forward and Reverse Rotation Adapt the machine to your requirements. The ability to rotate the spindle in both directions provides additional flexibility during machining operations. Swiveling Head ±90° and Adjustable Head Height Handle a wide variety of machining tasks thanks to the ±90° swiveling head and adjustable head height. Achieve precise results under all working conditions. Optional Machine Base A machine stand/base is available as an optional accessory. Technical Specifications Parameter Value Maximum Drilling Capacity Cast Iron (HT200) 45 mm Steel 32 mm Maximum Face Milling Capacity 80 mm Maximum End Milling Capacity 28 mm Table Size 820 × 240 mm Table Travel (X/Y) 595 / 185 mm Maximum Tapping Capacity M24 Spindle Taper MT4 Spindle Speed Range Low Range 75–438 rpm High Range 438–2500 rpm Spindle Travel Manual 107 mm Automatic 100 mm Distance from Spindle to Column Surface 250 mm Maximum Distance from Spindle Nose to Table Surface 445 mm Motor Power S1/S6 1.5 / 1.8 kW Net Weight 350 kg Overall Dimensions (L × W × H) 1084 × 924 × 1550 mm Height with Base 2150 mm

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power with overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Bedpfx Amozd Rizenjli Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: used, table width: 695 mm, table length: 1,200 mm, BOHNER & KÖHLE Knee-Type Milling Machine / Router, used, equipped with: rotary table, clamping surface approx. 1,200 x 695 mm, milling spindle with 1.5 HP, speed range: 700, 1,400 and 2,800 rpm. The bevel gear, which can be seen in picture no. 5, is not included in the scope of delivery! Bjdozdrn Sspfx Amnjli Technical specifications: weight approx. 3000 kg dimensions (l x w x h) approx. 2400 x 2300 x 2750 mm.

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,000 rpm, feed rate X-axis: 25 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (min.): 140 rpm, Equipment: rotational speed infinitely variable, Our demonstration machines at a great price: MDX-60 milling and drilling center, travel range X-axis 6300 mm, and MDX 20, travel range X-axis 2050 mm. Efficient CNC technology for economical component machining. Why use expensive and complex CNC machines with complicated standard CNC controls for these parts, or continue to rely on manual, time-consuming processes such as marking, center punching, and drilling?  No CNC knowledge is required thanks to a user-friendly interface.  There is no easier-to-use CNC milling/drilling machine.  Even with just one hole, the machine is faster than manual operation. Bljdpfxszdb Nms Amnji  Up to 80% time savings.  Graphical display of the programmed parts on a 21” screen.  Long parts can be fed through using a follow-up program.  Import of DXF and DSTV data directly from the CAD system.  High process and repeatability reliability.  Parts can be programmed after only a few minutes of instruction. Why make it complicated when it can be more efficient? The MDX center is a robust, clearly structured machine with minimal follow-up costs. An investment that pays for itself from the very first component. A cost-reducer for every metalworking company. Our great price for these demo machines, directly from us as the manufacturer in Bavaria: MDX 20: €63,500.00, including delivery MDX 60: €91,000.00, including delivery Validity: while supplies last. Arrange a demonstration appointment in Arnstorf or request our offer.

Condition: used, Approximately 40 tool holders for FEHLMANN, Picomax 51. Bjdpfezc Eriex Amnjli

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment Bsdpfx Ajzc Dyxsmneli - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: good (used), - MK3 - Variomat (continuously variable speed control) Blodsza Surepfx Amnoi - Table dimensions: 670 × 290 mm - Digital display on the X-axis - Cooling system - Lighting - 380V

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 615 B, The machine is in working condition, but it is missing a coolant reservoir and requires repainting. Bodpfx Amsza A E Uenjli

Condition: good (used), Year of construction: 2008, CNC MILLING MACHINE Blodpfxozabv Eo Amnei Manufacturer: FEHLMANN (SWITZERLAND), Type: PICOMAX 55 CNC 2/3, Year of manufacture: 2008, with quill, Control system: HEIDENHAIN 520, x/y/z travel: 500/255/160 mm, rotary axis (w-axis) travel: 500 mm, Table size: 885 x 320 mm, Spindle speed: 7100 rpm, Hydraulic tool change system: SF 32, Low operating hours.

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Bsdpsy T E Itofx Amnsli Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, Drilling and Milling Machine Manufacturer: KNUTH Type: TBF 500 Year: 2002 with coordinate table Spindle taper: MK4 Spindle speeds: 125-2500 rpm Motor power: 1.1 kW Table travel: X 500 mm, Y 160 mm Max. installation height: 300 mm Spindle stroke: 130 mm Table size: 200 mm x 730 mm Machine dimensions: Width 1000 mm, Depth 800 mm, Height 1800 mm, Weight approx. 350 kg Bledpfx Ajy Spubsmnoi In good condition.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 3010164, Offer 25462 Technical Data: - Drilling capacity in ST 37 up to 32 mm - Drill spindle mounting with drawbolt thread M 12 / MT 3 - Drill spindle speeds: 120 to 1600 rpm - Drilling unit height adjustable via hand crank - Maximum distance table / drill-milling spindle: 650 mm - Drill spindle stroke with fine feed via handwheel: 130 mm - Drill spindle outreach: 205 mm - Drill-milling unit rotatable 360° - Coordinate table with 3 T-slots: 730 x 210 mm - Table travel: X-axis 250 mm / Y-axis 200 mm Bledpfjy Nabaox Amnsi - Drive: 400 V / 1.5 kW - Space requirement: approx. W 1150 x H 1100 x D 1100 mm - Weight: approx. 270 kg

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Bodpfxjy Hq Dyj Amnoli Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, ZX7045 B1L milling and drilling machine is a versatile drill-mill designed for precision metal machining in workshop and production environments. The machine combines drilling and milling functions, ensuring stable operation thanks to its heavy cast-iron construction and a wide spindle speed range. It is a solution for facilities that require repeatability, rigidity, and real productivity. Main advantages Heavy, stable cast-iron body – minimizes vibrations during milling and drilling Automatic spindle feed (125 mm) – improves efficiency in batch operations Height adjustment on the support, not the column – greater setup precision 12 spindle speed ranges up to 3200 rpm – adaptable to material and tooling Equipped with coolant system – stable cutting conditions and extended tool life Dovetail guideways – high rigidity and movement accuracy Tilting head ±90° – enables angled machining Quiet operation thanks to ground gears and capability of both left- and right-hand rotation Construction and technology The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. Its heavy base and cast-iron body ensure high system rigidity. The cross table (1000 × 240 mm) features a precision-ground working surface, allowing accurate workpiece clamping. The MT4 spindle taper enables the use of a wide range of tools, including end mills, face milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered at 400 V, ensures stable performance even at larger milling diameters. Precision and performance With X/Y/Z travels of 560 / 190 / 430 mm, the machine supports a wide range of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. Adjustable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow parameters to be tailored to the material and quality requirements. Standard equipment Drill chuck arbor MT4/B18 Drill chuck 3–16 mm / B18 Reduction sleeve MT4/MK3 Reduction sleeve MK3/MK2 Basic tools User manual (Polish) Optional equipment Machine stand Automatic X-axis feed Swivel, tilting, and precision vises Rotary tables and dividing heads Tapping heads and milling heads Tool holders and drive arbors Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face mill diameter: 80 mm Bledoy E Hk Hepfx Amnei End mill diameter: 28 mm Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) Spindle taper: MT4 Spindle feed: 125 mm (automatic) Table size: 1000 × 240 mm Base dimensions: 440 × 600 mm Max. spindle-to-table distance: 445 mm Spindle-to-column distance: 262.5 mm X/Y/Z travel: 560 / 190 / 430 mm Quill feed rates: 0.12; 0.18; 0.25 mm/rev Head tilt (left/right): 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 375 kg

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,775 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, total length: 1,000 mm, total height: 1,700 mm, total width: 750 mm, table length: 580 mm, drilling depth: 130 mm, Arboga A2508U Milling Machine. Milling & drilling possible. 3-phase 380 Volt, 2-speed motor runs perfectly! Blodpfx Amey D Ugtensi Geared head with 8 spindle speeds. Spindle RPM adjustable from 100 up to 2775. MT3 spindle taper. Tool ejector. Röhm Supra 1-13mm drill chuck included. Röhm machine vice included. Drilling depth adjustable. Max drilling depth: 130mm Head angle adjustable. Head height adjustable. Cross table size: 580x250mm Made in Sweden. Overall dimensions: 100x75x170cm Weight: 270KG Contact us for shipping options! € 3,500.00 EX VAT!

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: BSA50, drilling capacity: 50 mm, Equipment: documentation/manual, Used grinding machine for sale. Ideal for workshops and DIY enthusiasts. The machine is fully functional but shows signs of wear consistent with its age. Perfect for sharpening tools and various grinding tasks. Robust construction ensures long-lasting durability. A must-have for every craftsman! Invest in quality. Grinding of two- and three-edged tools, drills up to 50 mm diameter Bljdpfoyz Iipox Amnoi Comprehensive documentation and instructions available Very versatile grinding machine, ready for use