PMP Service

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Nkedpjyxm Irofx Ah Row Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Creep feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Coolant system High-pressure coolant Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B axis Hydraulic unit Spindle oil cooler Note: The loading shaft must be supplied by the buyer.

Condition: used, Year of construction: 2007, (2007) Matsuura HPlus 300 PC11 CNC Horizontal Pallet Changing Machining Centre With Matsuura G-Tech 30i Contro Nedpfx Ahjyw Thce Rjkw Table Dimension 300 x 300mm. Maximum Table Load 250kg. Maximum Component Dimension Ø530mm x H760mm. Axis Travel 'X'=500mm, 'Y'=560mm, 'Z'=500mm, 'B'=0-360° (0.001° Increment). Distance Spindle Nose To Table 80-640 mm. Rapid Traverse 'XYZ'=60,000mm/min, 'B'=100rpm. Spindle Speed Range 50-15,000rpm (15kW Motor). Spindle Taper BT 40. 150 Position ATC. Maximum Tool Ø90mm (Ø150mm No Adjacent Tool), Maximum Tool Length 300mm, Maximum Tool Weight 8kg. S/No. 16950 (2007). Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice). With Dual Auger To FSE Chip Conveyor, FSE Through Coolant High Pressure Filtration System, Quantity Of Pallets With Tombstones, Spin Window, Hand Wheel, Signal Tower, Full Manuals, Tool Holders, Back Up CD/USB & Maintenance Records. New Spindle 18 Months ago at a cost of £20,000. Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice).

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, overall weight: 10,000 kg, spindle speed (max.): 14,000 rpm, number of axes: 4, This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2013. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and weighs approximately 10,000 kg with the rotary table. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details. • Power connection: 200 V / 3-phase / 50 Hz • Control: MORI SEIKI Additional equipment Nkedpfx Ajyw Rh Tsh Rew • CONSEP chip conveyor • KNOLL coolant filter unit, model FKA/500/KF110 (2013)

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, overall weight: 10,000 kg, spindle speed (max.): 14,000 rpm, number of axes: 4, This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2012. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and includes a rotary table, CONSEP chip conveyor, and KNOLL coolant filter unit. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details. • Connection specifications: 200V / 3 phases / 50Hz • With rotary table • Control: MORI SEIKI Additional equipment • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filter unit (2012) Nkjdpfxoyw N R Hs Ah Rjw

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 14,000 rpm, number of axes: 4, This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2011. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum spindle speed of 14,000 rpm and a robust table size of 400 x 400 mm, with a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details. • Units available: 2 • CNC Horizontal Machining Center (Mori 1) MORI SEIKI NH4000 DCG • Connection specifications: 200V/3 phases/50Hz Nsdpfxsyw N I Sj Ah Rokw • Table dimensions (W x D): approx. 40 x 40 cm • Control: MORI SEIKI • Horizontal CNC Machining Center (Mori 2) MORI SEIKI NH4000 DCG • Operating hours: 22,031 • Power supply: 200V/3 phases/50Hz • Control: MORI SEIKI Additional equipment • Mori 1 • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filter unit (2011) • Mori 2 • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filter unit (2011)

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Nkodpfx Ahoywxbns Rsw Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: used, Year of construction: 1995, functionality: fully functional, Year of manufacture: 1995 ▪ FANUC CNC control ▪ Travels: X 840 mm, Y 840 mm, Z 760 mm ▪ Milling spindle: 10,000 rpm ▪ Spindle motor power: 30 kW ▪ Spindle taper: ISO 50 (DIN 69871) ▪ Tool magazine with 60 positions ▪ No. 2 pallets, 630 x 630 mm ▪ Full-contouring rotary table (4th axis) ▪ Coolant through spindle, 40 bar with enlarged tank and paper filter ▪ Chip conveyor ▪ Tool presetting/presence probe ▪ Electronic handwheel (MPG) ▪ Weight: 18,500 kg X & Z axes rails and carriages replaced in 2022 Nkjdpfeywugysx Ah Rsw Spindle line newly rebuilt in 2024 Tool changer gearbox newly rebuilt in 2024

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, nominal power (apparent): 49 kVA, controller manufacturer: Okuma, controller model: OSP-P200M, table width: 400 mm, table length: 400 mm, table load: 400 kg, spindle speed (max.): 16,000 rpm, operating hours of spindle: 58,000 h, coolant supply: 60 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, pallet changer: automatic, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained 3-axis Okuma MA-400HA horizontal machining center for sale. The Z-axis module needs to be overhauled. If more than 30% of maximum rapid traverse speed is selected, the axis does not move. The machine is still in daily production and can be inspected at any time. The machine is sold including: - 100 SK tool holders (without tools) Nodpsyvga Uefx Ah Rjkw - Renishaw OMP60 measuring system including probe and receiver - 60 bar internal coolant supply - 6 pallets including fixtures for machining round parts. Minimum fixture diameter 160mm, maximum fixture diameter 370mm - Mayfran Consep 2000 II chip conveyor

Condition: excellent (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, torque: 95 Nm, controller model: ARUMATIK, Sparkchanger 3020 15 K – Technical Data and Condition Travel Distances and Dimensions X-axis travel: 762 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Distance from table to spindle: 100 mm to 610 mm Spindle and Tools Spindle speed: 15,000 rpm Tool magazine type: BT40 Number of tool positions: 30 Max. tool length: 300 mm Max. tool diameter: 150 mm Feed and Rapid Traverse Rapid traverse X & Y axes: 50 m/min Rapid traverse Z axis: 36 m/min Feed rate: 36 m/min Pallet Changer and Table Pallet changer table size: 500 x 860 mm Max. table load: 500 kg Additional Equipment Nkodpfx Ahjyuua Tj Rjw Cooling system: IKZ (internal coolant supply) Chip conveyor: combination type (scraper belt and hinged belt) Probe: Renishaw probe OMP 60 Tool measurement: Renishaw OTS (tool length & diameter measurement as well as breakage monitoring) Safety: Kraft & Bauer fire suppression system Operating medium: Can be operated with oil Operating Information and Condition Operating hours: 3,500 automatic hours Previous application: Exclusively used for aluminium components and oil cooling Machine condition: Very good

Condition: used, Year of construction: 1991, x-travel 710 mm y-travel 510 mm z-travel 510 mm Control Mazatrol M 32 Nedpfx Aheyutp Ts Rjkw size of pallet 500x500 mm spindle taper ISO 40 turning speeds 50-10000 U/min Spindle capacity 7,35 KW tool magazin: 60 numbers of pallets 6 weight of the machine ca. 8,5 t Accessories: Screw conveyorThe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial Number: 450 The machine is still under power and can be made available at short notice. • P8 power supply valued at 1500.- was replaced as recently as August 2024 • The spindle was repaired in 2017 and since then has mainly been operated in single-shift mode. As we primarily produce individual parts and small batches, the machine has spent most of its time being set up rather than running • Machine: Mori Seiki SH-50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Design: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travel: X 630mm, Y 600mm, Z 650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed on the X-axis has been reduced by 20% to extend the life of the telescopic covers. Seal ring on the pallet changer is likely defective, resulting in oil leakage. As a temporary fix, we have installed a ball valve in between; whenever a pallet change is required, the valve is opened. This doesn’t happen very often. Nkodpfxeyt Nnpo Ah Row If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2018, Horizontal Machine Center DMG MORI NH 5000DCG/40 Year 2018 Nkodpfx Aoyt Iubsh Rjw Tavel X 730 Y 760 Z850mm Fully C axis 0.001 degree MAPPS FAUNC Spindle 14,000rpm 37/22KW at 303Nm HSK-A63 Taper 60 ATC Pallet 500 x 500mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,500 mm, overall weight: 10,600 kg, number of axes: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Additional equipment • 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree • Workpiece probe • Internal cooling Nedpfxeytumds Ah Rskw • Large coolant tank with automatically coated filter paper Machine Benefits Technical Machine Benefits • Table size: 400 x 400 mm • Tool magazine: 60 positions Extra Information Machine still under power Dimensions Machine Depth 6000 mm Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2002, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 tools, SK 40 Nodjyrir Sspfx Ah Rokw Paper filter Chip conveyor

Condition: used, Year of construction: 2007, x-travel 200 mm y-travel 200 mm z-travel 400 mm Nedjyrh Avepfx Ah Rokw Control Siemens 840 D total power requirement 84 kW weight of the machine ca. 13 t

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Njdpfeyqybbjx Ah Rskw Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: used, Year of construction: 2004, x-travel 630 mm y-travel 630 mm z-travel 700 mm Control Meldas M650 tool adaptor HSK-A63 Table dimensions 450x450 mm Nkjdpfjyqv Azsx Ah Row Table load 400 kg number of spindle speeds 300 - 20.000 min-1 spindle taper HSK-A63 coolant durch Spindel drive motor Ac 45/30KW kW Rapid travel Z=60 m/min rapid traverse X,Z = 120 m/min feed Schnittvorschub =0,1-60 m/min rapid traverse B=120 m/min total power requirement 30 kW weight of the machine ca. 15 t FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2017, x-travel 700 mm y-travel 700 mm z-travel 700 mm Control Siemens type 840Dsl Number of spindles 2 St. Double reversible clamp The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Nodpoyquarsfx Ah Rekw We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2004, x-travel 800 mm y-travel 630 mm z-travel 710 mm Control Siemens type 840Dsl Number of spindles 2 St. Njdpfx Aeyqrx Seh Rjkw turning speeds 30-12000 U/min tool taper HSK 63 Tool changer 80 Pos. Feed 1-40.000 mm/min NC rotary table (B-axis) 250 degrees, minimum indexing unit 0.001 degrees, NC rotary table (A-axis) 360 degrees, minimum indexing unit 0.001 degrees, Cooling system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Nkodoypv T Rjpfx Ah Row Weight: 20,800 kg

Condition: used, Year of construction: 2019, 2019 OKUMA MA600HII 4-Axis Milling Machine with OSP P300M Control, 630 x 630mm Table max loads up to 1,200kg, high-speed Spindle 12,000rpm, Traverse Speed 60m/min, full-size Tool Magazine with 171 Stations, X Axis Travel 1000, Z Axis Travel 1000, Y Axis Travel 900. S/No. 224574 (2019) Nkodpfx Ajyplrpeh Rew A charge of €4500 for preparation and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Location: These lots are located in Mielec, Poland. Please visit our website for more details. Auction 3459

Condition: used, HELLER BEA 7 CNC machining center Control: Siemens Tool holder: SK40 Travel (approx.): X-axis: 630 mm Y-axis: 500 mm Z-axis: 560 mm Spindle speed: up to approx. 6,000 rpm Tool magazine: approx. 40 stations Machine weight: approx. 8,000 kg The machine is of robust construction and is suitable for precise milling and drilling operations in both single-piece and series production. The Siemens CNC control ensures reliable, intuitive operation. Options: With chip conveyor (if available) With tool changer With documentation With various tools With different pallets Nsdpfx Aoym Edgjh Rjkw

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, TECHNICAL DETAILS Travels & Axes Travel X-axis: 560 mm Travel Y-axis: 560 mm Travel Z-axis: 630 mm B-axis: 1° increment index table Rapid Traverses Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Workpiece Dimensions Maximum workpiece height: 900 mm Maximum workpiece diameter: 630 mm Maximum workpiece weight: 400 kg Spindle & Tools Maximum spindle speed: 14,000 rpm Distance spindle center to pallet surface: 80–640 mm Distance spindle nose to pallet center: 100–730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Feed Feed rate X-axis: 50,000 mm/min Feed rate Y-axis: 50,000 mm/min Feed rate Z-axis: 50,000 mm/min Work Table Table width: 400 mm Table length: 400 mm Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Nkjdpfx Ahoyk A S Ns Row Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,242 mm, table width: 2,170 mm, overall weight: 8,600 kg, spindle speed (max.): 10,000 rpm, tool weight: 7,000 g, product length (max.): 4,177 mm, number of axes: 3, This 4s TAJMAC-ZPS H40 TREND horizontal machining centre was manufactured in 2015. It features a spindle speed range of 40 – 10,000 rpm and an automatic tool changer with a capacity of 45 tools, ensuring efficient operation. With a rapid traverse of 50 m/min and a rotary table indexing range of 360°, this machine offers versatile machining capabilities. Consider the opportunity to buy this TAJMAC-ZPS H40 TREND horizontal machining centre. Contact us for further details. • B axis (table indexing range): 360° • Distances: • Spindle face to rotary table axis: 130–690 mm • Spindle axis to pallet clamping surface: 80–590 mm • Floor to pallet surface: 950 mm • Feedrates: • Feedrates in X/Y/Z: 0–15 m/min (programmable up to 50 m/min) • Rapid traverse in X/Y/Z: 50 m/min • Acceleration in X/Y/Z: 5 m/s² • Rotary table indexing time: • 0–90°: 3.2 sec • 0–180°: 4.6 sec • 0–270°: 5.5 sec • 0–360°: 6.7 sec • Accuracy (VDI/DGQ 3441): • Direct measuring system: Positioning X/Y/Z 0.008 mm; Repeatability X/Y/Z 0.005 mm • Indirect measuring system: Positioning X/Y/Z 0.010 mm; Repeatability X/Y/Z 0.006 mm • Spindle: • Transmission: Belt Nodpfx Aoykacxeh Rskw • Continuous torque (S1): 90 Nm • Torque at overload (S6-40%): 127 Nm • Automatic Tool Changer: • Capacity: 45 tools • Tool search: Both directions • Tool-to-tool time: 3.5 sec • Max tool diameter: 85 mm (with adjacent tools), 125 mm (without adjacent tools) • Max tool length: 300 mm • Max total weight in changer: 200 kg Additional equipment • Automatic pallet changer (APC): • Number of pallets: 2 • Pallet exchange time: 10 sec • Pallet weight: 90 kg • Coolant filtration unit: TECNIMETAL (weight without coolant: 280 kg) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC Control: Heidenhain ITCN 530 Nksdjyiyg Ispfx Ah Rew Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.