Woodmachine Sp. z o.o.

Condition: ready for operation (used), Year of construction: 2011, Additional Equipment Joint trimming unit Gluing unit Snipping unit Pre-milling unit Shaping trimming unit Profile scraper blades Surface scraper blades Buffing unit Grooving unit Ijlhcdwowttydexsau This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2015, This Biesse Akron 1440 was manufactured in 2015. It features a touchscreen control, joint milling, and a gluing unit with two Teflon-coated glue pans. It handles edges in rolls and stripes from 0.4 to 12 mm. Additional features include a snipping unit, pre-milling, rounding, and both profile and surface scraper blades. Consider the opportunity to buy this Biesse Akron 1440 edgebander. Contact us for more information about this machine. Ielhcewttxyedwxoau Application Types Edge Banding

Condition: used, Year of construction: 2008, Thickness of coiled edgeband max: 3 mm Workpiece length min: 65 mm Feedrate max: 18 m/min Electromotoric height adjustment: Yes Iolhcdewtqpcjwxsau Glue system granulate: Premelting unit Magazine for single strips: Yes Premilling unit: Yes SCM Premilling unit RT-E: Yes Preheating zone: Yes Trimming saw: 2 motors SCM Trimming saw K/SEL: Yes Flush/radius/chamfer milling units: 2 SCM Fine milling unit RI/1000: Yes Corner rounding unit: 2 motors SCM Corner rounding unit ROUND K: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RAS/K: Yes SCM Scraper unit RC L: Yes Buffing unit: Yes SCM Buffing unit SP N: Yes Finishing aggregate: Hot air Type: left-side machine Control: SCM ORION 200 Conformity marking: CE mark Weight: 2.080 kg

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Specification: Iolhcdwswtpx Asxjau Feed Speed: 8-18m/min Feed speed with contour trimming: 14m/min Workpiece Thickness: 8-60mm Edge Coil Material: 0.4-3mm Edge Material Strip: 0.4-12mm Pre-Milling Unit Workpiece Pre-Heating QA34 Gluepot for PU Glue Pressure Tank for PU Application Unit Magazine with Pressure Zone End Trim Unit Chamfer / Straight Pneumatic adjustment chamfer / straight and 2 point adjustment for flush / overhang

Condition: excellent (used), Year of construction: 2022, Specification: Feed speed 11m/min Separating agent spray device Joint Trimming unit Panel pre-heating QA65 glue pot for PUR application Airtec zero joint unit Pressure zone Lubricant spray unit Snipping Unit with pneumatic adjustment chamfer / straight Spray unit for antistatic Iajlhjwtpv Iecdwxju Trimming Unit radi 2mm Counter trimming unit radi 2mm Multistage scraping unit radi 1.3 & 2mm Glue Joint scraping unit Detergent spraying unit Buffer unit Led Indoor lighting 15.6 inch touch screen

Condition: used, Year of construction: 2022, Special price exhibition machine Garbsen edge banding machine K36 pcs. POWERFUL AND ROBUST. This Hebrock long-runner offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily work. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock sets new standards in the field of perfect edge processing of a wide variety of edge thicknesses. TECHNICAL PROFILE - Max. edge thickness up to 3 mm (optionally 8 mm) - Min. / Max. workpiece thickness 8-60 mm* - Min. workpiece length approx. 200 mm* - Min. workpiece width approx. 80 mm* - Feed speed approx. 7/10 m/min - Ready for operation in 6 minutes - Optional multi-tools - Weight 1700 kg - Extraction nozzle for jointing machine 80 mm - Extraction nozzle for main extraction (rear of machine) 140 mm - Air consumption standard machine approx. 300-400 l/min - Air consumption airtronic machine approx. 600-800 l/min THE BASIC EQUIPMENT - PLC control with touchscreen 10- Optical display for workpiece sequence- Pre-milling- Top-mounted hot melt adhesive container (interchangeable tank design / maintenance-free) with adhesive outlet device- Cross-cut saw- Milling unit- Corner milling machine- Radius scraper- Surface scraper- Cleaning station- Tools- Chip collection box (cross-cut saw)- Transport chain with permanently bolted special chains- Ball-bearing double roller top pressure- Boom (extendable to the front)- Unit viewing window from the rear of the machine and the operator's sideJoining stationWhispercut joining system with exchangeable dimensions: ø 100 x 43 mm Optional: ø 100 x 63 mmMotor power: 2 x 2.2 kWSpeed: 12,000 rpmMax. joining depth 3 mm - up to workpiece height 40 mmMax. Joining depth 2 mm - for workpieces over 40 mm. Optimal cutting edge utilization through separate manual height adjustment of the joining heads. ADVANTAGE - No more resharpening of the heads, only replacing diamond cutting edges. - No more readjustment in the machine necessary. - Only one set of joining heads required. - Lightweight aluminum construction makes it easier on motors. - Height adjustable for optimal cutting edge utilization. Glue pot interchangeable design. The proven Hebrock glue pot technology includes: - Peak heating times of the glue pot; your machine is ready for operation within 6 minutes! - A special Teflon coating, making cleaning your glue pot child's play. - Convenient and easy changing of your glue pot, thanks to quick-release fasteners on the electrical and pneumatic components, so a change is possible in under a minute. - Filling capacity 1 kg. Glue changing device. The glue changing device integrated in the machine makes changing glue types or colors easy. Simply press the button stored in the program to heat up to reach the outlet temperature, then Manually open the outlet using a slider and let the glue pot drain. Then refill the glue pot with new granules and achieve perfect results. Pressure zone: These 4 pressure rollers exert optimal pressure on the glued edge thanks to their spring-loaded mounting. Thanks to their coating, they are also easy to clean from adhesive residue or dirt. The stable construction of the mitre saw with linear guides enables precise sawing of the workpiece. Front and rear power: Version: 1 x 0.37 KW, speed 12,000 rpm. Milling station: This all-rounder in the field of edge processing offers the option of switching between the processing methods: radius / cha Iajlhewtnwqjcdwxsu

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: AH00003079, SCM Stefani KD HP edge banding machine for standard and polyurethane glue Year of manufacture: 2021, commissioned in September Machine used for 3 years in very good condition Test runs possible TECHNICAL DATA Adjustable feed speed: m/min 10 - 20 Panel thickness: mm 8 – 60 Edge thickness in strips: mm 0.4 – 12 Edge thickness from roll: mm 0.4 – 3 Max. cross-section of edge from roll: mm2 135 Diameter of edge roll plate: mm 780 Edge overlap relative to panel thickness: mm 2 + 3 Distance between adjacent panels (10 m/min): mm 500 Distance between adjacent panels (20 m/min): mm 650 Min. panel length (with min. width 100 mm): - at speed up to 18 m/min mm 140 Iajlhcjwtnu Asdwxeu - at speed up to 20 m/min mm 250 Min. edge length from roll: mm 170 Min. edge length in strips: mm 250 Min. panel width (with min. length 210 mm): - for panels up to 40 mm thick mm 55 - for panels 41 to 60 mm thick mm 80 - for edge thickness above 3 mm mm 80 Support carriage opening: mm 600 Working height: mm 950 – 980

Condition: used, Functionality: unexamined, Ferwood code: RU0011644 – Manufacturer code: K6343K0945 – Condition: Used – Functionality: Untested – If interested, we offer refurbishment service, please contact us. Iaelhcdowtm A Sswxou

Condition: ready for operation (used), Year of construction: 2010, General Data Iolhowtivnocdwxeau Measurements depth 7845 mm Machine weight 5000 kg Additional Equipment HOMAG gluing and finishing components This HOMAG KAL 210 AMBITION 2264 edgebander was manufactured in 2010. It features a max glued edge thickness of 20 mm, edge gluing height up to 60 mm, and a max feed speed of 25 m/min. Equipped with a granulate glue system, preheating zone, and various processing units including a joint trimming and corner rounding unit. Consider the opportunity to buy this HOMAG KAL 210 AMBITION 2264 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Application Types Ijljwtiu Dohcdwxoau Edge Banding

Condition: good (used), Year of construction: 2014, operating hours: 14,922 h, Functionality: fully functional, overall weight: 1,980 kg, pressure: 7 bar, operating pressure: 7 bar, On offer: An edge banding machine with a well-equipped set of units Manufacturer: Biesse Model: Akron 440 Iaelhjwthwqjcdwxeu Year of manufacture: 2014 Weight: 1980 kg Operating hours: 14,922 Machine length: 5160 mm Workpiece height: 10 - 60 mm Max. workpiece height with contour trimming unit: 35 - 60 mm Edge thickness in rolls: 0.4 - 3 mm Min. workpiece length: 140 mm Min. workpiece width (at 140 mm length): 85 mm Min. workpiece width (at 140 mm length): 50 mm Feed speed of conveyor chain: 12 m/min Operating pressure: 7 bar Equipment: 1) Joint trimming unit FI - 502, each with 3.5 kW high-frequency motors, set of diamond cutters H = 65 mm, ø 80 mm. Tracing system allows preservation of original geometry. 2) Gluing unit VC - 511, automatic edge feeding, pressing with 3 pneumatically controlled pressure rollers, (additional glue pot for EVA glue) 3) End trimming unit IN - 801, each 0.8 kW, tiltable from the control panel from 0° - 15° 4) Chamfer milling unit RI - 501 (with multifunctional kit and axis control), independently adjustable from 0° - 25° 5) Contour milling units CR - 200V 6) Compact radius scraper unit RBK - 503 7) Surface scraper RCC - 701 8) Buffing unit SP - 501 9) Hot air unit PH - 501, for refreshing the colors of thick PVC/ABS edges after processing with the surface scraper unit

Condition: excellent (used), Year of construction: 2006, operating hours: 770 h, Functionality: fully functional, total length: 6,400 mm, workpiece height (max.): 55 mm, total width: 900 mm, edge thickness (max.): 8 mm, total height: 1,600 mm, overall weight: 2,600 kg, pressure: 6 bar, On offer: Edge banding machine in very good condition with very few operating hours! Manufacturer: Brandt Model: KDF 660 Year of manufacture: 2006 Weight: 2600 kg Operating hours: 770 h Islhswthpgocdwxoau Machine length: 6360 mm Machine width: 900 mm Machine height: 1600 mm Workpiece height: 8 - 55 mm Max. workpiece height with contour milling unit: 40 mm Edge thickness (rolls): 0.4 - 8 mm Min. workpiece length: 160 mm Min. workpiece width: 65 mm Feed speed of conveyor chain: 14 m/min (11 m/min automatic with contour milling unit) Operating pressure: 6 bar Control: Power Control PC 16, all functions via simple push-button operation, short setup times, error diagnostics in plain text, graphical interface, production data acquisition Equipment: 1) Jointing milling unit for re-machining sawn workpiece edges to achieve optimal edge quality 2) Gluing unit, Quickmelt gluing part 3) End trimming unit, robust and high-precision thanks to linear guides 4) Tilting pre-milling unit with pneumatic adjustment 5) Contour milling units with automatic adjustment between thin and thick edges 6) Profile scraping unit with quick-change heads for easy tool changes 7) Flat scraping unit 8) Buffing unit

Condition: used, Year of manufacture: 2015, Edge thickness: 0.4-3 mm, Radius scraping unit: Yes, Surface scraper: Yes, Strip material up to 8 mm, Material thickness 12 to 64 mm, xmotion Plus control, Pneumatic-mechanical infeed lock, Jointing unit, Corner rounding unit, Infrared heating lamp for preheating the panel edge, Pressure unit, Combination milling unit Iajljwtfzyshcdwxju

Condition: used, Hebrock K34 PLC control with 15" touchscreen Pre-milling unit for joining before the gluing part (3 mm) Glue pot with removable pot and glue outlet device Max. edge height 60 mm Cross-cutting unit Milling unit for flush/radii/bevel trimming Corner rounding unit for radii/bevels Multi-radius scraper (R1/R2) Nesting Surface scraper Islhcdwjwtfvkexoau Release agent spray device Year of manufacture 2023, 52 operating hours Machine is in mint condition From carpentry liquidation / retirement from carpentry

Condition: excellent (used),

Condition: good (used), Year of construction: 2000, Machine available in approx. 8 weeks very good condition Edge banding thickness 0.4 - 8 mm Edge banding height max 51 mm Workpiece thickness 6 - 50 mm Workpiece width min. 65 mm Workpiece length min. 180 mm Feed rate 11 m/min Motorized bridge adjustment Control panel PLC Edge feeder 1902 automatic with pneumatic chopper up to 3 mm Gluing station 1906 with automatic reloading of glue cartridges Iaolhcdswr Turowxou Tracking nozzle Pressure unit 1816 3 rollers, 1st roller driven End trimming unit 1918 with 2 motors, pneumatically swiveling 0 - 12° PLC Milling unit 1942 combination with 2 PLC flush/chamfer/radius Radius scraper 1929 Corner rounding 1983 PLC Surface scraper 1964 Buffing unit 1940 Chip collection box Extendable workpiece support

Condition: used, Year of construction: 2018, Workpiece return: Conveyor belt Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 25 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Zero joint: Hot air BIESSE AirForce-System: Yes Glue system granulate: Premelting unit Quick-change glue pot: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Finishing aggregate: Hot air Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 6.450 mm Control: BIESSE SMART TOUCH 21,5 '' Islhcswr Airjdwxsau Conformity marking: CE mark Total connection: 27 kW Weight: 3.200 kg

Condition: used, Year of construction: 2014, Edgeband thickness max: 6 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Workpiece width min: 70 mm Feedrate max: 11 m/min Glue system granulate: glue pot below feeding chain Quick-change glue pot: Yes Magazine for single strips: Yes Premilling unit: Yes Ijlhewr Ahbocdwxeau Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Type: right-side machine Machine length: 3.800 mm Control: FELDER LCD ANZEIGE Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 7 kW Weight: 900 kg

Condition: good (used), Code: 0142 Brand: BRANDT - GERMANY Model: KD 56 - CE Standard Automatic edge bander for wood, pvc, veneer, abs, for furniture, custom-made furniture, panels, kitchens and various - CE Standard Technical data: Edge thickness mm 0,4 - 3 Min/max panel height mm 8 - 40 Min panel width mm 60 Min panel length mm 140 Feed speed mt/min 9 Panel support roller conveyor Composition: Gluing unit Shear for cutting roll material Double end cutting unit: Motors Kw 0,18 each - 12000 rpm Iaoljwryf Djhcdwxsu Tilting trimming unit: Motors Kw 0,27 each - 12000 rpm tilting 0-25° Edge scraper unit Brush unit: Motors Kw 0,090 - rpm 2750 - Brush diameter mm 120 Protection cabin Suction inlet diameter mm 100 Wheels on the basement for easy handling Power Kw 3,8 Compressed air 6 bar Overall dimensions mm 3100 x 900 x 1400 h Weight kg 860

Condition: excellent (used), Year of construction: 2020, Edge bander Manufacturer: Felder Type: G360-4 Year of manufacture: 2020 Operating hours: approx. 439 h Edge thickness: 0.4 -3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total output: 5.5 kW Total length: approx. 3,200 mm Islhcdwowrqzioxeau Joining unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: excellent (used), Year of construction: 2018, Edge bander Manufacturer: Felder Type: G360 Year of manufacture: 2018 Operating hours: approx. 903 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total power: 5.5 kW Total length: approx. 3,200 mm Islhcdwjwrqv Tjxoau Jointing unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: excellent (used), Year of construction: 2018, Edge bander Manufacturer: Felder Type: G360 Year of manufacture: 2018 Operating hours: approx. 1,288 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Ijlswrqk Dohcdwxeau Feed: 8 m/min Total power: 5.5 kW Total length: approx. 3,200 mm Jointing unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: used, Year of construction: 2016, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 20 m/min Electromotoric height adjustment: Yes Glue system granulate: glue pot below feeding chain Ijlhcdewrd N Hjwxeau Quick-change glue pot: Yes Suitable for PUR glue: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Suitable for nesting: Bündig/Radius/Fasestationen, Flat scraper Aggregates actuated by control: NC-axes Type: right-side machine Machine length: 5.284 mm Conformity marking: CE mark Total connection: 11 kW

Condition: used, Year of construction: 2020, Edgeband thickness max: 6 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Feedrate max: 10 m/min Iasljwrd Najhcdwxou Electromotoric height adjustment: Yes Glue system granulate: glue pot below feeding chain Quick-change glue pot: Yes Suitable for PUR glue: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Suitable for nesting: Flat scraper, Profile scraper, Bündig/Radius/Fasestationen Type: right-side machine Control: FORMAT 4 SMARTOUCH X-MOTION PLUS Conformity marking: CE mark Total connection: 15 kW

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Islhcdowq Sc Sowxjau Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280