T.B.G. Magyarország Kft.

Condition: used, Year of construction: 2016, Overview This Thermindus GV INSIEME is a propane-fired steam generator with an output of 250 kg of steam per hour, built in 2016 in Italy. It was commissioned in 2017 and supplied process steam to a craft brewery: the brewhouse hot side, a flash pasteurizer and a semi-automatic keg washer. It comes with 20 m of stainless steel steam line, a propane supply with automatic changeover and a maintenance logbook covering 2017 to 2026. Technical data - Manufacturer: Thermindus (Italy) Hedpfoz Hfxtsx Alwou - Model: GV INSIEME - Year of manufacture: 2016 - Machine type: gas-fired steam generator - Steam output: 250 kg/h - Maximum operating pressure: 6 bar - Safety valve setting: 6 bar - Test pressure: 10.4 bar - Maximum temperature: 165 °C - Water content: 44.1 l - Fuel: propane (P35 cylinders) - Electrical supply: 385 V + N - Pressure equipment: PED 2014/68/EU, category III, CE marked - Operating hours: 1,600 h Equipment - Steam generator with multi-jet gas burner - Control cabinet with indicator lamps and emergency stop - Stainless steel steam line, 20 m (flow and return) - 2 propane cylinder connection hoses with automatic changeover valve Condition Used, in very good working condition; in production until August 2026. Rust traces on the parts that are not stainless steel, with no effect on operation. Maintenance logbook with weekly, quarterly and annual checks; the last annual service in January 2026 covered descaling, a combustion check and anti-corrosion treatment. The unit is already dismantled, stored and ready for truck loading. Inspection possible on request. Availability Immediately. Location: France.

Condition: used, Year of construction: 2016, Overview This ABE KEG COMMANDER DUAL HEAD is an automatic keg washer built in 2016 by American Beer Equipment (USA) for craft breweries. Two kegs are processed side by side in a PLC-controlled cleaning cycle, with an output of 24-30 kegs per hour. The compact stainless steel unit carries its tanks, pumps and piping in its own frame and is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: KEG COMMANDER DUAL HEAD - Year of manufacture: 2016 - Machine type: automatic keg washer with 2 washing stations - Output: 24-30 kegs/h Hodpsz Hc Ulofx Alwsu - Operating mode: automatic, PLC with HMI display - Tank volume: 25-30 US gal (approx. 95-115 l) - Maximum power consumption: 11.3 kW - Electrical supply: 3-phase - Feed water: min. 4.1 bar (60 psi) at approx. 57 l/min (15 gpm) - Compressed air: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Air drain pressure: 1.4-2.1 bar (20-30 psi) - CO2 supply: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Machine weight: 220 kg Equipment - Two washing stations with height-adjustable keg holders and wash heads - Control panel with HMI display, a cycle start button per station, cycle cancel and emergency stop - Integrated stainless steel tanks - Two Goulds pumps with 3-phase motors - Stainless steel piping with water and drain connections and manual ball valves - Operator's and technical manual (English) Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Hodpez Hckmefx Alwou Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack CA-1 - Year of manufacture: 2006 - Machine type: carton erector with bottom gluing - Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps - Power supply: 400 V, 3 Ph, 50 Hz, 15 A - Compressed air: min. 5 bar operating pressure - Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm - Blank infeed: roller conveyor with stainless steel rollers, roller width 1,000 mm, infeed clearance 800 x 450 mm - Outfeed: roller conveyor with stainless steel rollers, roller width 300 mm, 3,050 x 650 x 880 mm Equipment - Stack preparation with automatic loading of the blank magazine - Blank magazine with lifting device, side guides and front and rear stops - Pick-up and erecting stations with vacuum suction grippers and vacuum unit - Folding, gluing, closing and pressing devices for the carton bottom - Side and height adjustment by handwheel for different carton sizes - Enclosure with windowed safety doors - Operator panel with display, keypad, start/stop, key switch and emergency stop; operator texts in French Hsdpfx Alsz Hcivoweu - Control cabinet and pneumatic service unit - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2022, Overview SMI ECOBLOC ERGON 6-20-5 HC EV blow moulder-filler-capper combiblock for still mineral water in 6.0 L PET bottles, max. 6,000 bottles/h. Built in 2022, started up in 2023 and run only 3 to 4 times a year. The complete downstream line (handle application, labelling, robot palletizing) is also on offer. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap Equipment - SMI blow moulder for 6 moulds - Filler with 20 filling valves - Capper with 5 capping heads - Cap sorter and cap elevator - Pressco control system for preform and neck inspection, integrated in the combiblock Not included Hsdpfoz Hcb Eex Alwju Blow moulds, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEM plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability From October 2026; the machine must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: used, Year of construction: 2007, Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Hodjz Hcaujpfx Alwou Technical data - Manufacturer: KHS - Model: Innofill NRF - Year of manufacture: 2007 - Output: 12,000 bottles/h - Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm - Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top - Vacuum device with vacuum pump - Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps - Machine pitch 36π, running direction left to right - Conveyor: stainless steel slat chain, 85 mm wide, conveyor height 1,250 mm - Power supply: 400 V, 3/N/PE, 50 Hz, 90 A nominal current, 100 A slow fuse; control voltage 24 V DC - Enclosure type 12 - Overall dimensions approx. 5,300 x 3,600 x H 4,400 mm Scope of delivery - Filler-closer monoblock with guarding, front panels slide up - Automatic central lubrication - Two infeed hoppers for corks and caps with elevating feed, approx. 1,600 x 1,200 x 1,720 mm and 1,500 x 1,250 x 1,550 mm - Stainless steel CIP unit, approx. 3,000 x 1,300 x 1,900 mm - Stainless steel control cabinet, approx. 2,500 x 750 x 2,100 mm - Stainless steel trolley, approx. 800 x 750 x 1,650 mm - Two trolleys with change parts, colour-coded format sets - KHS documentation: operating manuals, spare parts list, 2022 operator-panel supplement Condition Used. The machine is still installed at its production site and can be inspected by appointment. Availability Immediately.

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping Hsdpfx Aloz Hb Scjwju - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: T20-3 KMT - Year of manufacture: 2006 - Machine type: bottle dryer (air knife tunnel) - Conveyor: plastic chain, 120 mm wide - Power supply: 400 V, 3 phases, 50 Hz - Control voltage: 24 V DC - Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Equipment - Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts - Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers Hsdpfx Asz Hb Nuelwsu - Siemens SIMATIC touch panel (French, Dutch, German) with output counter, selector switches and emergency stops - Control cabinet with four Danfoss VLT 2800 frequency converters - Stainless steel frame on adjustable feet, enclosure with transparent hinged guard doors - CE marked Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This Kematec MBK 12 AS, built in 2006, places shrink capsules on wine bottles and shrinks them on in 12 heating stations. It runs at 3,000 - 12,000 bottles per hour and covers bottle heights of 235 - 360 mm and bottle diameters of 50 - 115 mm. The machine is still installed in a wine bottling line and can be inspected on site. Technical data Hsdpjz Hbzksfx Alweu - Manufacturer: Kematec - Model: MBK 12 AS - Year of manufacture: 2006 - Machine type: capsule placing and shrinking machine - Output: 3,000 - 12,000 bottles/h - Capsules: shrink capsules, max. length 80 mm, max. diameter 40 mm - Head diameter: 33 mm - Heating stations: 12 - Capsule magazine: 1,800 capsules - Bottle height: 235 - 360 mm - Bottle diameter: 50 - 115 mm - Working height: 1,100 mm (+/- 50 mm) - Direction of travel: left to right - Power supply: 400 V, 50 Hz; main drive 0.75 kW - Compressed air: 6 - 7 bar, approx. 350 l/min - Overall dimensions (L x W x H): 3,700 x 2,500 x 2,580 mm - Weight: approx. 1,400 kg Equipment - Capsule magazine with multi-level storage shelves and capsule feed - Rotary capsule placing turret - Rotary shrinking turret with 12 heating stations - Bottle infeed and outfeed on slat chain conveyor with guide rails - Siemens touch panel (French, Dutch, German) with fault list, emergency stop and signal tower - Control cabinet with PLC - Stainless steel frame, enclosure with transparent guard doors - CE marked; operating manual with spare parts list available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack SP - Year of manufacture: 2006 - Machine type: pick-and-place case packer - Bottle infeed: 4 lanes, lane width 85 mm - Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles - Case clearance: 175 x 400 mm - Power supply packer: 400 V, 3 Ph, 50 Hz, 27 A - Robot controller: KUKA KR C2, 400 V, 3 Ph, 50/60 Hz, 8 A - Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm - Change-part trolleys: 4 units, each 2,050 x 1,300 x 2,100 mm Equipment - Base frame with lifting column, counterweight and lifting unit - Cross conveyor and shifting carriage for the gripper head - Gripper head with pneumatic bottle tulips - Centring device for the cases in the packing zone - Four-lane bottle infeed table with lane guides - Case infeed and outfeed conveyors - Enclosure with windowed doors and safety fencing - KUKA KR C2 controller cabinet and KCP teach pendant on stand - KHS control cabinet - 4 change-part trolleys with gripper heads for different bottle sizes Hjdsz Hbxispfx Alwou - Operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2007, Overview This Logopak LOGOMATIC 920 II PF, built in 2007, is a print-and-apply labelling system for pallets. It prints labels by direct thermal or thermal transfer and applies them with a telescopic tamp applicator onto pallets standing still beside the conveyor. The machine is still installed at the end of a wine bottling and palletising line and can be inspected on site. Technical data - Manufacturer: Logopak - Model: LOGOMATIC 920 II PF - Year of manufacture: 2007 Hedpfxoz Hbp Is Alweu - Machine type: print-and-apply pallet labeller - Output: 4 labels/min - Print methods: direct thermal and thermal transfer - Label size: 148 x 210 mm (W x H), 3 mm gap - Label roll: max. diameter 400 mm, core diameter 76 mm (150 mm) - Mounting: vertical, print head at the bottom - Control: Logopak POWER LEAP II - Interfaces: W&T COM server, RS 232 - Power supply: 88 - 240 V AC, 50/60 Hz; 7 A at 115 V, 3.5 A at 230 V - Compressed air: required (valve block and vacuum generator) - Overall dimensions (L x W x H): 1,530 x 1,000 x 2,910 mm Equipment - Labelling unit in a closed cabinet with two windowed doors - Label unwinder, printer and telescopic tamp applicator - Control box on the machine frame with display terminal, start/stop, emergency stop, auto/bypass key switch and main switch - Bypass function and three-colour signal tower - Floor frame with foot plates for anchoring beside the pallet conveyor - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2007, Overview This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed. It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer. Hsdpez Hai Tjfx Alwsu Technical data - Manufacturer: Krones - Model: Variojet - Year of manufacture: 2007 - Machine type: rotary rinser for glass bottles - Output: up to 48,000 bottles per hour - Bottle formats: 330, 400, 500, 580 and 650 ml glass - Rinsing positions: 110 - Treatment stages: water rinsing, air blowing, gravity drainage - Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20 - Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A - Operating hours: 44,485 h - Dimensions: approx. 4.5 m across the carousel including the safety guarding Equipment - Rinser with carousel, bottle grippers and transparent safety doors - Front table with infeed screw and starwheels - Control panel with Krones iPanel - Water and air supply manifold - Domnick Hunter compressed-air dryer - Change parts for 330, 400, 500, 580 and 650 ml bottles - Water drip trays Condition Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed. Availability Available from late February / March 2027, after removal from the production line. Location: Poland.

Condition: used, Year of construction: 2015, Overview Hjdpfez E U D Njx Alwsu Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump Hodpfjz E U Dijx Alweu - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: used, Year of construction: 2012, machine/vehicle number: PST30, Used Tetra therm aseptic pasteurizer - 2012Technical Specifications & Performance DataThis aseptic pasteurizer delivers reliable high-temperature short-time processing for demanding beverage production. Engineered within the Tetra Therm family and manufactured in collaboration with Alfa Laval, it is configured for aseptic operation with integrated deaeration for quality preservation in sensitive products. As a second hand unit from industrial packaging environments, it offers strong performance for a used bottling line or a standalone processing cell.Machine type: Aseptic Pasteurizer (Flash)Brand: Tetra Pak (engineered with Alfa Laval)Model: CM6-SMYear: 2012Production capacity: up to 12,000 L/h (current setting approx. 6,000 L/h)Maximum process temperature (TS): 125 °CMaximum allowable pressure (PS): 6.0 barTest pressure (PT): 8.6 barProcess volume: 162.0 LFluid group: 2Deaerator: IncludedCE conformity: CE 0409Test pressure date: 2012-11-28Advanced Automation & Control SystemsDesigned for modern beverage production, this aseptic pasteurizer supports automated temperature control and stable holding conditions suited to HTST workflows. It is compatible with typical PLC/HMI architectures used in bottling equipment and packaging machinery, enabling recipe management, alarm handling, and trending through standard plant control systems. Safety interlocks and CE-compliant protections contribute to consistent operation and operator safety during process and cleaning phases.Production Line Integration CapabilitiesBuilt for inline placement within a beverage production or used bottling line, the unit integrates upstream with preparation and deaeration modules and downstream with sterile tanks, fillers, or homogenizers typical of industrial packaging. Format agility at the process level makes it suitable for multiple juice recipes and still beverage SKUs, helping plants adapt to seasonal or private-label demands without extensive hardware changes.Machine Condition & Maintenance HistoryThis is a second hand aseptic pasteurizer previously used for tomato juice and still (non-carbonated) drinks. It is presented as operationally ready for deployment, offering a practical choice for producers seeking proven equipment with established performance characteristics in beverage processing environments.Operational Performance & VersatilityThe system’s aseptic flash process, 125 °C temperature rating, and integrated deaeration help protect color, aroma, and nutritional attributes while reducing dissolved oxygen for improved shelf life. Its capacity range—currently set around 6,000 L/h with headroom to 12,000 L/h—supports both pilot-scale and medium-scale beverage production. This configuration is well suited to juice applications and other still beverages requiring controlled thermal treatment.Installation Requirements & Site PreparationThe pasteurizer is typically skid-mounted for straight... Hodpfxoz E Dlcj Alwju

Condition: used, Year of construction: 2004, machine/vehicle number: LC637, Used Sidel-Krones PET bottling line 18000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for PET bottle handling and optimized for still water applications. Built with premium components from Sidel, Krones, AROL, SMI, Twinpack, ACMI, TOSA, ., and Videojet, it delivers consistent performance at industrial scale. The line operates at a production capacity of 18,000 bph and is configured for the most common market formats.Production speed: 18,000 bph 2L, 23.000 BPH 0,5L Container types: PET bottlesBottle formats: Compatible with 0.5L and 2.0L bottle formatsPrimary components: Sidel SBO 16 Series 2 blow molder (16 molds), Sidel ALSIM gravity filler (63 valves), AROL capping system (pre-threaded plastic caps), Krones CONTIROLL roll-fed labeler (1 station, 16 bottle plates), SMI SK452 F shrink wrapper, Twinpack MHTE handle applicator, ACMI PASAR P130 2L layer palletizer, TOSA 125 + 475 ring pallet wrapper, . R 13/2 preform tipper, Videojet 3210 laser coderAir recovery: Integrated with blow molderChiller: Not includedTooling: Blow molds not includedBuild years (components): 2000–2024Advanced Automation & Control SystemsThe line integrates modern automation features across critical stations to ensure stable performance and high-quality output in beverage production. The Krones CONTIROLL labeler features electric head adjustment for precise label placement, while the capping system by AROL uses a pick & place distribution to ensure reliable application of pre-threaded plastic caps. The Sidel ALSIM filler operates within a pressurized cabin equipped with filters to support hygienic filling conditions.The Sidel blow molder includes an air recovery system to optimize compressed air utilization. Operator interfaces across the equipment provide intuitive adjustment and monitoring, supporting quick startups, changeovers, and routine operations in high-throughput environments typical of industrial packaging.Production Line Integration CapabilitiesThis second hand used bottling line is designed for seamless integration from preform handling to end-of-line palletizing. The . preform tipper, hopper, elevator, and preform infeed supply the Sidel SBO 16 Series 2 rotary blow molder. Downstream, the gravity filler and AROL capping machine form a robust monobloc for consistent filling and closure application. The Krones CONTIROLL labeler applies plastic wrap-around labels via a roll-fed station, supported by a Videojet 3210 laser coder for high-contrast coding. Secondary and end-of-line packaging are handled by the SMI shrink wrapper, Twinpack handle applicator, ACMI layer palletizer, and TOSA ring wrapper.Inline configuration from preform tipping through palletizingFormat change capabilities for 0.5L and 2.0L PET bottlesSuitable for water production with PET containersMachine Condition & Maintenance HistoryThis used bottling line is presented in working condition with components manufactured between 2000 and 2024, including a recent 2024 Videojet coder for coding in... Hedpfx Asz E Dk Eolwsu

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 9,000 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2008Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000 Hodpfxez E Dkxo Alwsu

Condition: used, Year of construction: 2001, machine/vehicle number: LC651, Used KRONES filling line for Vodka - glass 6000 BPH - Year 2001Technical Specifications & Performance DataThis complete glass bottling line, engineered around Krones equipment, is optimized for still strong spirits in non-returnable glass bottles. Configured with a dedicated rinser, a vacuum filling monoblock, a dual-carousel cold-glue labeling and tax-stamp system, and tray-plus-film secondary packaging, it delivers consistent performance for premium spirits presentation.Year: 2001Nominal speed: 6,000 bph on 0.7L formatContainers: Non-returnable Glass bottles; shapes handled: round, flask, shtoffFormats supported: 0.2L, 0.25L, 0.37L, 0.375L, 0.5L, 0.7L, 0.75LRinser: Krones Varioject 1440-24-188; rotary, 24 nozzles; single-channel; fixed nozzles; pre-treated water; gravity draining; no air blowFiller-Capper: Krones Vacufill 960-024-124-V; vacuum filling for still spirits; 24 filling valves; capper with 4 headsClosures: ROPP aluminum and Guala non-refillableLabeler: Krones Prontomatic / Taxomat 720-9-3-180 TA; cold glue; pre-cut paper labels; U-shape tax stamp 160 x 20 mmPacker: MEYPACK VP410; tray + filmConveyors: Krones Synco S bottle conveyors; Krones pack conveyorsControls: Siemens S7 PLC; electrical cabinets includedAdvanced Automation & Control SystemsThe line integrates centralized automation using a Siemens S7 PLC for reliable sequencing of rinsing, vacuum filling, labeling, and packaging. Electrical cabinets are included, supporting line interlocks, safety circuits, and device control. The rotary platforms and mechanical cam systems in the labeling/tax-stamping station ensure repeatable precision at rated speeds, while format-specific change parts support quick, accurate format transitions.PLC/HMI: Siemens S7 PLCControl architecture: Centralized line control with machine-to-machine interlocksSafety: Emergency-stop circuits and guarding typical of Krones rotary equipmentChangeover: Format parts for multiple glass shapes and volumesProduction Line Integration CapabilitiesDesigned for cohesive in-line operation, this used bottling line connects rinsing, vacuum filling, cold-glue labeling with tax stamping, and tray-plus-film packaging via Krones conveyor systems. It is ideal for second hand industrial packaging upgrades in beverage production focused on spirits in glass bottles. The broad format coverage supports brand portfolios requiring flask and shtoff bottles across multiple sizes.Machine typeManufacturer / ModelYearVarious EquipmentKrones Synco S (Conveyors) Hsdpfxoz E Di Uj Alwju

Condition: used, machine/vehicle number: LC674, Used MEC ISO DPS 12-12-1C bottling line - 2600 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling in 0.33L and 0.5L formats. The line combines filling, carbonation, sterile filtration, CIP cleaning, labeling, date coding and rotary bottle handling equipment for beverage production and industrial packaging applications.Container type: Glass bottlesCompatible formats: 0.33L and 0.5L bottlesFiller: Eurostar ISO DPS 12/12/C counter-pressure filler, 2,600 bphSTS labeling machine: S2T3/R1 front, back and neck labeling with date stamping, 2,500 bphCanellitech wraparound labeling machine: 3,000 bphCondition: Fully refurished in 2022. Filtration: 5 micron, 1 micron and 0.45-micron sterile filtration stagesCIP system: 2 x 350L tanksAdvanced Automation & Control SystemsThe line includes dedicated date-coding equipment, combining the STS integrated date stamp with a separate Overprint inkjet date stamp. This arrangement supports product identification and coding requirements within a glass bottle bottling process. The Carbotech 1000 carbonator is equipped with an upgraded variable overpressure pump to support controlled carbonation operations.The listed CIP, filtration and product-preparation equipment provide key process support for beverage production. Machines of this type are normally coordinated with bottle handling and packaging machinery to maintain a consistent production flow.Production Line Integration CapabilitiesThis complete bottling line is designed around counter-pressure filling of glass bottles and can be integrated with upstream product preparation and downstream industrial packaging equipment. Rotary loading and offloading tables support bottle transfer around the filling and labeling section. Full change parts are included for 0.33L and 0.5L bottle formats, supporting format changes between the stated bottle sizes.Machine typeManufacturer / modelYearVarious EquipmentITPL Filtration System2022Various Equipment6 PD CIP System2022Filling MachineEurostar ISO DPS 12/12/C2006SaturatorCarbotech 10002021Labeling MachineSTS S2T3/R12015 Hodsz E Dizopfx Alwsu

Condition: used, Year of construction: 2006, machine/vehicle number: LC672, Used Vitone V5 decanter for oil - 90ql MalaxeTechnical Specifications & Performance DataThe Vitone V5 is a used oil decanter system designed for separation duties within an olive oil processing operation. The system is configured around a decanter unit with a stated processing capacity of 50 q/h. It includes a 90 ql malaxer, an electrical control panel and an Alfa Laval separator, creating a coordinated processing package for oil production.Manufacturer: VitoneModel: V5Year: 2006Processing capacity: 50 q/hIncluded malaxer capacity: 90 qlIncluded equipment: electrical control panel, Alfa Laval separator and malaxerAdvanced Automation & Control SystemsAn electrical control panel is included with the decanter system to support operation and coordination of the processing equipment. The decanter assembly incorporates mechanically driven separation equipment, while the supplied control panel provides the basis for integrating the system into an oil extraction process. Control, motor and electrical specifications should be assessed during installation and recommissioning.Production Line Integration CapabilitiesThis oil-processing package is suited to the extraction and separation stages of an olive oil production plant. The malaxer prepares the olive paste before decanting, while the Alfa Laval separator supports downstream clarification and phase separation. The system does not handle containers or packaging formats directly; it is intended for process integration before bottling, labeling, capping and other industrial packaging operations.Machine typeManufacturer / modelYearMalaxerNot statedDecanterVitone V52006Centrifugal SeparatorAlfa LavalMachine Condition & Maintenance HistoryThis second hand oil decanter system is already dismantled and in storage. Its disassembled condition can simplify transport planning and allow the buyer to organize the layout of the malaxer, decanter, separator and electrical panel according to site requirements. Reassembly, mechanical inspection and functional commissioning are key stages before the equipment is returned to production.Operational Performance & VersatilityThe Vitone V5 decanter system is intended for oil processing applications, combining malaxing, decanting and separation functions. The 90 ql malaxer supports paste conditioning ahead of the decanter, while the included Alfa Laval separator is part of the final separation process. This configuration is relevant for processors seeking used bottling line ... Hedpfoz E Diuex Alwsu

Condition: used, machine/vehicle number: LC661, Used CFT-JORDAN complete fruit and vegetable puree production lineTechnical Specifications & Performance DataThis used bottling line is configured as a complete aseptic filling and processing line for fruit and vegetable purees. It integrates preparation, thermal treatment, deaeration, sterilization, and aseptic bag-in-bin/bag-in-drum filling. Designed for industrial packaging and food-grade production, it offers second hand value with robust stainless steel construction and modular components suitable for continuous operation.Main aseptic filler: MACROPACK TM2000/3Filling performance: up to 90 bags/hour (220.0L) or 30 bins/hour (1000.0L)Processing capacities (typical): crushers 9–15 t/h; enzymatic deactivators 20 t/h; vacuum deaerator 20 t/h; sterilizer 17 t/hThermal equipment: Pasteurizer 1.5 t/h (4000 x 1600 x 2350 mm); Enzymatic Deactivators ETS 20 fast/slow; Sterilizer OLIMPIC TC XX/ASUtilities (selected): sterilizer steam 2100 kg/h; deactivator steam 2000 kg/h; aseptic filler steam 50 kg/hKey powers (selected): Sterilizer 120 kW; Enzymatic Deactivator fast 18 kW; slow 12.5 kW; Aseptic filler 10 kW; pumps 1.2–18.5 kWMaterials: stainless steel tanks and sanitary pumps for hygienic product contactContainer formats: 220.0L bags; 1000.0L binsAdvanced Automation & Control SystemsThe line features modular automation at machine level with integrated motor control on pumps and thermal units. The aseptic filler is equipped for controlled dosing and steam-assisted sterilization of filling circuits. Operator panels on key units enable parameter setting for temperatures, flow rates, and timings. Safety interlocks and emergency stops are included on major modules such as the sterilizer, deactivators, and filler. Quick-change product hoses, sanitary clamps, and pump speed adjustments support rapid changeovers between puree types and package sizes.Production Line Integration CapabilitiesThis second hand aseptic processing and used bottling line is engineered for cohesive operation across preparation, thermal treatment, deaeration, sterilization, and aseptic filling. The included conveyors, pumps, and buffer tank ensure stable product flow, while the CIP station enables in-place cleaning of product-contact circuits. The system suits food and beverage production environments handling natural and concentrated purees.Machine typeManufacturer / ModelYearVarious EquipmentA Facchini 905/20 (Elevator)2007Various EquipmentCrusher 15 t/h (circular blades)Various EquipmentCrusher 9 t/h (studded shaft) Hjdoz E Dh Djpfx Alwsu

Condition: used, Year of construction: 2016, machine/vehicle number: PST34, Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice / concentrate (non-dairy)Documentation: Full documentation and user manual includedAdvanced Automation & Control SystemsThe integrated touchscreen HMI provides intuitive operation, real-time process visualization, and streamlined recipe management for consistent pasteurization results. Automated control of temperature, product flow, and holding time supports stable performance and product safety. Alarm handling, trend logging, and guided operator prompts help ensure repeatable processes with minimal downtime. The system’s CIP-ready design allows automated cleaning sequences to be managed from the control interface for efficient changeovers and hygiene assurance.Production Line Integration CapabilitiesEngineered for seamless integration in beverage production environments, this flash pasteurizer connects upstream to blending, filtration, and storage tanks, and downstream to fillers and industrial packaging systems. The skid-mounted footprint simplifies placement and utilities hook-up, enabling fast commissioning within second hand or upgraded processing setups. Its continuous operation supports steady flows into downstream filling and labeling equipment, helping maintain overall line efficiency.Machine Condition & Maintenance HistoryThe unit has a documented non-dairy product history processing apple juice and concentrate, contributing to a clean internal condition profile. Supplied with full documentation and user manual to facilitate installation, operation, and maintenance. Presented as a second hand pasteurization system suitable for beverage production environments seeking dependable thermal treatment with compact installation.Operational Performance & VersatilityThe tube-in-tube configuration is well-suited for juices, concentrates, and similar non-dairy beverages where gentle handling and stable heat transfer are critical. The design supports rapid heat-up and controlled holding for effective microbial inactivation while preserving product quality attributes. The CIP-ready construction, sanitary connections, and stainless steel surfaces... Hedpfx Aljz E Dhqewsu

Condition: used, Year of construction: 2014, machine/vehicle number: LC675, Used CSAK brewing canning line 2500 cans-hourTechnical Specifications & Performance DataThis complete canning line is a used, fully reconditioned industrial packaging system designed for beer production in standard 330 ml cans. Built around an atmospheric filling process, the line provides a coordinated solution for empty-can handling, filling, labeling and date or lot coding.Production capacity: 2500 cans/hCan format: 0.33L standard cansFilling method: Atmospheric filling, not counter-pressure fillingFiller manufacturer: Cask Brewing SystemsYear: 2014Advanced Automation & Control SystemsThe line includes guarded conveyor-based equipment with integrated operator controls. Visible features include touchscreen control interfaces, status-light towers, pushbutton controls and emergency-stop devices. Pneumatic lines, valves and adjustable conveyor guide components support controlled handling through the packaging process.Production Line Integration CapabilitiesThis complete canning line combines essential process stages for beer canning, from depalletizing empty cans through atmospheric filling, labeling and coding. It can be integrated with upstream beer-processing equipment and downstream secondary packaging machinery through suitable conveying and line-control arrangements.Machine typeManufacturer / modelYearDepalletizerCan depalletizer/elevatorFilling MonoblockCask Brewing Systems atmospheric filler2014Labeling MachineS2S Labelling Machines S2/ZPrinterLinx inkjet coderThe 0.33L can format makes this equipment suitable for producers requiring a compact beverage production solution for standard beer cans. The modular arrangement also supports practical connection to can conveyors, accumulation sections and downstream industrial packaging operations.Machine Condition & Maintenance HistoryThe line is used and fully reconditioned, providing a prepared second hand canning solution for operation. Its reconditioned condition is particularly relevant for buyers seeking established beverage production equipment with the core filling, labeling and coding functions supplied as one line.Operational Performance & VersatilityThe atmospheric filler is intended for beer in cans and is specifically identified as a non-counter-pressure filling system. The line incorporates an empty-can depalletizer/elevator, a Cask Brewing Systems filler, a Linx inkjet coder and an S2S Labelling... Hedpfxjz E Dhke Alwou

Condition: used, machine/vehicle number: LC680, Used KRONES Gera Returnable Glass Bottling Line, 20000 BPHTechnical Specifications & Performance DataThis used bottling line is a complete returnable glass bottling line designed for handling bottles in crates, covering the process from crate preparation through filling, labeling, inspection, crate packing and palletizing. The line combines equipment from Krones, Kettner, Rink, Syscona, Matec, Falterbaum and Bohrer.Filler capacity: 20,000 bphFilling type: isobaric filling (counter-pressure) - ( Heineken-style)Premix capacity: 22,000 L/hContainer formats: 0.33L and 0.75L returnable glass bottlesPackaging configuration: bottles in cratesClosure type: plastic screw caps Labeling technology: wet-glue labeling with 2 aggregatesMain equipment years: 1996–2016Advanced Automation & Control SystemsThe line includes automated systems for crate sorting, crate decapping, bottle unloading, washing, bottle inspection, closure inspection and finished-bottle quality control. The Krones Linatronic empty bottle inspector, Syscona Expert FHK closure inspection system and Krones Checkmat inspection equipment support controlled handling and verification throughout the returnable bottle process.Automated crate handling and inspection equipment can help reduce manual intervention while supporting repeatable product flow between washing, filling, labeling and repacking stages.Production Line Integration CapabilitiesThis complete bottling line is configured for returnable glass bottle production in reusable crates. Its process layout supports the preparation of returned containers, removal of existing closures, bottle and crate washing, empty-bottle inspection, filling and screw capping, wet-glue labeling, final inspection, crate packing and palletizing.Machine typeManufacturer / modelYearDecraterKettner Robot Junior RA3/C-T1996Decapping MachineRINK KM 690/4K2012Bottle WasherGM GERA ARCADE GEL32005InspectorKrones Linatronic2014Various EquipmentSyscona Expert KSA2014Various EquipmentBohrer R 302011Filling Monoblock Hedpfxez E Dhdj Alwsu

Condition: used, Year of construction: 1998, operating hours: 26,000 h, machine/vehicle number: LC670, Tetra Pak TBA 19 V10 complete filling lineTechnical Specifications & Performance DataThe Tetra Pak Tetra Brik Aseptic is a used bottling line filling machine for aseptic carton packaging. Built approximately in 1998, this industrial packaging machine is configured for 125 ml Slim Brik containers. Its vertical packaging-web handling arrangement supports the forming, filling and sealing stages required for compact carton packs in dairy product production.Manufacturer: Tetra PakMachine identification: Tetra Brik AsepticApproximate year of manufacture: 1998Machine Hours: 26.000 HoursContainer type: Brik cartonFormat: 125 ml SlimProduct application: Dairy productsFilling technology: Aseptic carton fillingAdvanced Automation & Control SystemsThe machine is equipped with an operator control panel and an electrical/control cabinet for managing operating functions. Visible pneumatic lines, mechanical drive assemblies and adjustable mechanisms indicate an integrated automation layout for web transport, carton formation and package handling. Aseptic carton filling equipment of this type is designed to coordinate film registration, forming and sealing operations through a controlled production sequence.The machine includes accessible service areas, adjustment points and an elevated operator platform to support routine operation and format-related setup activities.Production Line Integration CapabilitiesThis Tetra Pak filling machine is suited to operation as the primary filling and forming unit within an aseptic carton packaging section for dairy products. It can be integrated with upstream product preparation and sterile product supply systems, as well as downstream carton conveyors, accumulation systems, coding equipment and secondary packaging machinery. The lower discharge and product-handling section supports transfer of filled Brik packs toward the next stage of the production line.Machine typeManufacturer / modelYearFilling MachineTetra Pak Tetra Brik Aseptic1998The 125 ml Slim configuration makes this second hand aseptic filling machine relevant for beverage production and dairy packaging operations requiring compact carton formats. Integration should be planned around compatible carton conveying, downstream packing equipment and the process utilities required by the wider aseptic packaging installation.Machine Condition & Maintenance HistoryThe machine is offered as used industrial packaging equipment and is classified as ready for operation. Its stainless-steel enclosure, access panels, service platform, guardrails, access ladder and adjustable leveling feet are visible. Buyers can assess the equipment within the context of t... Hjdpfxsz E Dg Tj Alwou