Schreinerei Wagner

Condition: excellent (used), CATALOG NUMBER 7818 Technical data: - Max. working width: 1100mm - Max. working height: 180mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit - Metal pressure roller - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar - Extraction port diameter: 2x155mm Redpfx Absyyygdjkjr - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg Rsdpfxsyyyftj Abker – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 150 mm, type of input current: three-phase, – Made in Germany – Shoes with pneumatic jump (pressure shoe) TECHNICAL PARAMETERS: – Sanding width: 1100 mm – Max. sanding height: 150 mm – Min. workpiece length: 600 mm – Motor power: 2 x 15 kW – Both units with pressure shoes – Pneumatic pressure shoes – Adjustable shoe pressure – Rubber rollers: 70 Shore – Pneumatic oscillation – Cleaning brush – Feed tables with support rollers – Continuously adjustable feed speed – Feed speed range: 4–13 m/min – Extraction port diameter: 3 x 200 mm – Machine dimensions (L/W/H): 250 x 200 x 210 cm – Weight: ~2500 kg Rodpeyyv Auofx Abksr

Condition: excellent (used), WIDE BELT SANDER Butfering 110cm Model – super 111L Redpfx Abeyymlyjksr Sanding width: 1,100 mm 1 combination unit with steel roller The pad has quick raise/lower capability 11kW motor, star/delta starter Two feed speeds Electric table adjustment Electronic table position display Oscillation with photocells Sander in very good condition, ready for operation Machine dimensions: width 180cm, length 185cm, height 200cm Weight approx. 1,500kg

Condition: used, Kündig ENORM PRIMO – TOP CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine sanding machine Combination unit: contact roller and pneumatic sanding pad unit Enormatic Digital thickness display for workpiece height Belt drive motor power approx. 9 kW Contact roller level continuously adjustable via grit scale Infeed and outfeed table with roller support Working width 1100 mm Feed speed 2.5 - 15 m/min Machine will be PROFESSIONALLY REFURBISHED Available from stock Lieboch Rodpoyyltcjfx Abksr

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipped with 2 large-width upper sanding belts, with a calibration roller and sanding rollers, for sanding wooden panels and veneered surfaces. Maximum working width: 1350 mm Maximum sanding height: 160 mm Redpfx Aeyyb Najbkjr Machine weight: 2800 kg

Condition: used, Year of construction: 2004, functionality: limited functionality, power: 55 kW (74.78 HP), type of input current: three-phase, Model description on the information plate: KACCT 1150. Stored in dry conditions. Rsdpfx Ajyyannebksr

Condition: excellent (used), Wide Belt Sander SCM sandya 7 Sanding width: 1100 mm 1st unit with metal calibration roller, 15 kW 2nd combination unit with rubber roller and pad, 15 kW Rodpfoyx Dvysx Abker Minimum electrical protection: 32A Pad with quick lift and drop function Pneumatic oscillation Variable feed speed Electric table height adjustment Table position display Pneumatic feed belt centering Robust sander, excellent sanding quality

Condition: used, Year of construction: 2012, functionality: fully functional, working width: 1,100 mm, overall weight: 1,500 kg, power: 11 kW (14.96 HP), grinding belt speed: 18,500 mm/s, type of input current: three-phase, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 5.5 bar, grinding belt width: 1,100 mm, extraction nozzle diameter: 150 mm, input voltage: 400 V, operating pressure: 5 bar, pressure: 5.5 bar, workpiece width (max.): 1,100 mm, pass-through height: 160 mm, We are offering this used BULDOG 7 wide belt sander, year of manufacture 2012. Manufacturer: BULDOG Model: 7 Year: 2012 Condition: used Category ID: 1408 Type ID: 436 Machine type: Wide Belt Sander CE Safety Standard Wide belt sander/milling machine with a working width of 1100 mm The machine is in perfect working condition. The machine has a constant working height, making it ideal for integration into a production line with roller conveyors before and after the machine. Additional features: - Frequency inverter for the feed belt - Automatic feed belt tracking - Pneumatic interval air blasting system with oscillating nozzles for belt cleaning - Guide rails on both sides - Roller conveyors at the infeed and outfeed - Stroke of the shaft: 220 mm, adjustable from 80 mm up to 300 mm - Fixed machine table Rsdpfx Abjyxqdkjkor - Height adjustment via the sanding units - Up to 3 sanding units possible Working area: - Working width: 1,100 mm - Max. workpiece height: 160 mm - Min. workpiece height: 3 mm - Sanding belt length: 2,620 mm - Sanding belt speed: approx. 18.5 m/s - Feed speed: 3-15 m/min (stepless) - Motor power: approx. 11 kW - Power supply: 400 V - Operating pressure: approx. 5.5 bar - Air consumption: 50-300 l/min - Extraction speed: approx. 20 m/s - Extraction connection: 150 mm diameter - Weight: approx. 1,500 kg Applications: - Solid wood - Veneer - MDF/engineered wood panels - Lacquered and filled surfaces Disassembly and collection at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibrating and fine sanding machine, Kundig Brilliant wide belt sander with electronic segmented sanding pad, tiltable sanding unit, and lacquer sanding capability. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior finishing companies, also suited for intermediate lacquer sanding. Rsdpfxeyxg N Ns Abksr Single belt machine with combination sanding unit and electronic segmented pressure beam. Edge segments can be switched on and off. Segment width of pressure beam: 22mm (ideal for intermediate lacquer sanding). Pneumatically adjustable calibration roller, grooved rubber-coated roller with grit compensation. Drive motor 11kW. Infinitely variable belt speed: 3 – 15 m/s via frequency inverter. Conveyor belt feed speed continuously adjustable from approx. 3 to 15 m/min. Automatic workpiece-activated belt blow-off device. Constant table height approx. 950mm via adjustment of the upper machine section, making it integrable into sanding lines. Feed belt is still very grippy and in very good condition. Vacuum conveyor with adjustable fan maintains secure hold of small parts. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Abrasive belt dimensions: 1120 x 2000mm. Infeed and outfeed roller tables. Hood locking mechanism. Extraction connection 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blow-off nozzle, vacuum fan, calibration roller adjustment, and parameters of the segmented pad. Thickness measuring system with adjustable chip removal and Enormatic automatic thickness adjustment with feed release, eliminating the need for constant measuring with calipers. Programs for different sanding tasks can be stored and selected via smartselect. CE mark User manual 2 sanding inserts included Four bellows have been replaced No connection cable as shown Original paintwork, only minor touch-ups Very good condition from a small workshop Machine has approx. 1395 operating hours, about 2 hours per week Dimensions approx. 1900 x 1650 x 2150mm (LxWxH) Weight approx. 2300kg With large mobile storage table at conveyor belt height, for storing sanding belts Table size approx. 1520 x 1360 x 950mm Including various sanding belts from K80 to K400 The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see “more offers from this supplier.”

Condition: used, OTT MEGAtronic 111 Wide-belt calibration and fine sanding machine 1st sanding unit: calibration roller unit 2nd sanding unit: electronically controlled segmented pad unit Working width: 1100 mm Feed speed: 5 + 10 m/min Sanding unit motor power: approx. 11 kW Machine is WORKSHOP TESTED Redpfxoyw Rkno Abkjr Available ex stock Lieboch

Condition: excellent (used), working width 1100 mm calibrating unit with metal roller calibrating unit with rubber roller combination unit with rubber roller and pad activation of machine functions from the control panel Rodpoyw N R Tsfx Abkjr pneumatic oscillation pneumatic belt tensioning motor power: 9KW and 9KW, total power 18.5 KW two feed speeds for the conveyor material thickness gauge two feed speeds for sanding belts emergency stop switch

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Redpsywrzbjfx Abksr Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 1992, Wide belt sander Manufacturer: Bütfering Rodpfxoywi Rme Abkjr Model: AWS 1100 Year of manufacture: 1992 Sanding width: 1,100 mm Max. workpiece thickness: 150 mm Abrasive belt dimensions: 1,900 x 1,100 mm Power: 15 kW Feed speed: 2.5–12.5 m/min, variable

Condition: used, OTT Comet-2 1100 Wide belt sander Sanding width 1100 mm Machine is untested Service is recommended No warranty / No guarantee Ex stock Lieboch NET price € 1,900.00 Rsdpjywiyzjfx Abksr

Condition: used, Year of construction: 1997, Used machine Rjdpjyulfmefx Abkjr Year of manufacture: 1997 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding defective veneers and lacquers Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding barrier films with graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibrating roller can be activated via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1100 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blasting: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840 x 1670 x 2200 mm Availability: short-term Location: Röllbach

Condition: excellent (used), functionality: fully functional, Wide belt sander SCM Sandya 10 Redsyuclwopfx Abker Working width: 1100 mm Working height: 3–160 mm Number of sanding units: 2 1. Calibrating roller 2. Combi unit with pad CE certificate Main motor power: 11 kW

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0-001-747-312, Wide Belt Sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, Year 1991 TECHNICAL DATA Maximum working width: 1,100 mm Maximum working height: 150 mm Abrasive belt width: 1,110 mm Abrasive belt length: 1,900 mm 1st Sanding Unit Profiled steel contact roller, D=200 mm Motor power: 15 kW Rjdjyt Nvyspfx Abkjr 2nd Sanding Unit Combined contact roller and pad unit Profiled rubber-coated contact roller, D=150 mm Air-cushioned sanding pad Motor power: 11 kW 3rd Sanding Unit Pad sanding unit with electronically controlled segmented pressure beam Element width: 30 mm Co-running / counter-running Infinitely variable sanding belt speed (frequency inverter) Digital sanding belt speed display Motor power: 11 kW - Conveyor belt with continuously variable feed, 3 - 15 m/min - Vacuum table / vacuum clamping device, 11 kW - Rotating cleaning brush: 0.75 kW - Digital display of sanding height - Infeed roller table MACHINE DIMENSIONS Total length: 3,200 mm Total width: 1,850 mm Total height: 1,900 + 175 mm (extraction nozzle) Total weight: 4,100 kg

Condition: used, Year of construction: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Sanding pad 1st unit: electronic segmented shoe, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubberized contact roller, 65° Shore Sanding pad 2nd unit: electronic segmented shoe, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable 2 - 18 m/sec Belt cleaning unit: for 2nd unit Cleaning brushes: Yes Suitable for lacquer sanding: Yes Vacuum conveyor: Yes Feed speed: infinitely variable from 2.5 to 13 m/min Rsdpfx Aboytrf Rjkor Control: touch-screen Elect./pneumatic belt oscillation: yes Infeed height: fixed (top section moves) Table display: digital Working height / feed table height: 900 mm Motor power: 36 kW Location: Supplier

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Grinding belt width: 1370 mm Grinding belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed speed: 2.5 - 13 m/min (infinitely adjustable) Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Storage location: Nattheim Rjdpfeytrfkex Abksr

Condition: used, Year of construction: 1999, functionality: fully functional, total width: 1,600 mm, total height: 2,000 mm, total length: 2,000 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,187 kg, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, extraction nozzle diameter: 160 mm, input frequency: 50 Hz, input voltage: 400 V, - Italian made - DTR (technical documentation) and CE certified TECHNICAL SPECIFICATIONS: - Maximum working width: 1100 mm - Maximum working height: 170 mm - Minimum working height: 3 mm - Minimum working length: 370 mm - Dimensions of sanding belts (width x length): 1115 x 1900 mm - Feed motor power: 0.8 kW - Two feed speeds: 4.5 and 9 m/min - Sanding height adjustment motor power: 0.25 kW Rsdpfxoytp Age Abkjr - 2 units (aggregates): 1) Grooved steel calibrating roller, Ø 140 mm - Rubber pressure roller 2) Grooved rubber roller + shoe + steel roller - Rubber pressure roller - Aggregate I and II motor power: 15 kW From below: - 3 pressure rollers - Conveyor belt - 3 pressure rollers - Pneumatic belt oscillation - Air blower for the second sanding belt - Electric and manual table lifting (for precise setting) - With pneumatic brake - Sanding belt speed: 16 m/s - Operating pressure: 6 - 8 bar - Extraction port diameter: 2x160 mm, 2x110 mm Machine dimensions: - Overall dimensions (LxWxH): 2000x1600x2000 mm - Weight: 1200 kg

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 38947, Machine available at the end of March/beginning of April 2026 incl. extraction nozzle Workpiece thickness: 3 - 150 mm Feed speed: 4/8 m/min Rjdpfx Abeyrtrisksr Abrasive belt oscillation contactless (photo-electric) - 1st unit (calibrating) Drive motor: 11 kW Steel sanding roller D=140 mm Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Abrasive belt grit compensation Extraction nozzle D=180 mm - 2nd unit (calibrating/fine sanding) Drive motor: 11 kW Sanding roller hardness approx. 90° Shore Abrasive belt grit compensation 2 pcs stationary and flexible contact air shoes Workpiece infeed control Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Extraction nozzle D=180 mm - 3rd workpiece cleaning brush Extraction nozzle D=140 mm Feed table pneumatically adjustable (spring-loaded/fixed) Front and rear table extension

Condition: used, Kündig Topiq-1100 Swiss quality product Constant table machine / automatic head adjustment Wide-belt calibrating and fine sanding machine Combination unit with contact roller and sanding pad unit featuring electronically controlled segmented sanding shoe Rodpfsyngxhex Abker Belt drive motor power approx. 11 kW Contact roller height steplessly adjustable according to grit scale Working width 1100 mm Feed speed 3 - 15 m/min, infinitely adjustable Automatic workpiece thickness adjustment ENORMATIC quick setup Program selection via SmartSelect control Machine is WORKSHOP-REFURBISHED and in VERY GOOD CONDITION Available ex-stock Lieboch

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total height: 2,202 mm, total length: 3,900 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 4,200 kg, working height: 96 mm, conveyor belt speed: 250 mm/s, input current: 54 A, conveyor belt length: 6,800 mm, For sale: robust Houfek Final 1100 brush sanding machine in DBB configuration (rotary brushes + 2 rollers). The machine has seen very little use. Offered fully equipped (brushes, abrasive paper). Testing is possible—removal from the current location is planned for the end of March. Immediate sale possible. Rsdpfjyngcyox Abkjr

Condition: excellent (used), Year of construction: 2007, operating hours: 592 h, Calibration and fine sanding automatic machine, wide belt sander with electronic segmented sanding pad and lacquer sanding capability A video of the machine in operation can be provided upon request. Redjym Du Repfx Abksr Ideal sanding machine for interior finishing companies, also suitable for intermediate lacquer sanding. Single belt machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off Segment width of the pressure beam: 35mm Contact roller pneumatically adjustable, low wear thanks to grooved steel roller Grit compensation Drive motor 7.5kW with automatic motor brake, infinitely variable belt speed controlled by frequency converter from 2 - 18 m/s Feed belt speed infinitely adjustable via frequency inverter from 2.5 - 13m/min Pneumatic, workpiece-controlled belt blow-off device Cleaning brush at the outfeed Constant working height at 900mm by adjustment of the machine's top section, making it integrable into sanding lines Feed belt is still very grippy and in excellent condition Maximum sanding width approx. 1090mm Workpiece height approx. 3 to 150mm Standard sanding belt size 1120 x 1900mm 3 rubber-coated pressure rollers Infeed roller table and foldable outfeed table Preparation for vacuum blower. The conveyor belt is perforated, and a plug for an optional blower is available. Alternatively, the conveyor can also be connected to an extraction system. Extraction connection: 1 x 180mm, 1 x 140mm, and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine operation. Parameters: belt speed, feed speed, workpiece height, pressure beam application points front and rear, edge segments, belt blow-off nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE mark Operating manual (Delivered) without the connection cable shown Original paint, only repainted in a few areas Approx. 592 operating hours, about 40 minutes per week on average. Dimensions approx. 1800 (with table 2600) x 1800 x 2150mm (LxWxH). Weight approx. 2200kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available from our warehouse, see 'Other offers from this provider.'