Sas profil’in

Condition: reconditioned (used), functionality: fully functional, Automatic pointer, completely overhauled. New pneumatic system. Lajdpfxez D I Ske Apdsg New electrical components. The unit is in working order; a test video is available.

Condition: excellent (used), Automatic carbide saw grinder VOLLMER model CHP22H Lasdpfoz Dr Uvjx Apdsg

Condition: excellent (used), Circular knife grinder MVM model LA500 Lajdez An R Hspfx Apdog

Condition: ready for operation (used), Year of construction: 2022, Vollmer CHD 270 Automation Laedpez Aivqofx Apdsg

Condition: excellent (used), motor: 2.2 kW max. sharpening length: 710 mm feed motor power: approx. 0.37 kW blade guide adjustment: angular adjustable support: front/rear cooling: Lsdez Afkqspfx Apdsag automatic: blade diameter: 125 mm

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 used Petschauer PLT800 Manual machine for re-grinding the seat of carbide saw teeth, with a cutting-off device for carbide saw blades that require repair, with a diameter of 100 to 800 mm, where the carbide teeth are soldered on too long. This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding the seat after desoldering, using a 175 mm diameter and 4 mm wide ceramic grinding wheel, with an adjustment scale from 15° negative to 35° positive, and blade thickness adjustment. Left side: Cutting off carbide teeth that are soldered on too long, using a 150 or 175 mm diameter and approximately 1 mm wide diamond cutting disc. Adjustment scale for rake angle, 15° negative to 35° positive. The cutting-off process takes place at a 0° blade angle. Additional applications: Setting the tooth back Laedpfx Aezz Rlkspdog Setting the chamfer on TCT saw blades Face grinding with the help of a diamond grinding wheel Re-sharpening on the circumference of the saw blade at 0° Alternate tooth arrangement possible. Technical data: Saw diameter: Max. 800 mm Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm Depth: 72 cm Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Diamond cutting disc: 150 or 175 mm Operating voltage: 230/400 volts, 3 phases, 50 Hz or 230/440 volts, 3 phases, 60 Hz Fuse protection: 3 slow-blow fuses 10 A

Condition: good (used), Year of construction: 1985, functionality: fully functional, 1 used Iseli surface grinding machine, model EBW-E. Lodpfx Ajzz Rhlepdsag

Condition: good (used), Year of construction: 1997, functionality: unexamined, We offer this used Sigrist-Müller FKS 450-1HNFE sharpening machine, year of construction 1997. Manufacturer: Sigrist & Müller AG Machine type: FKS 450-1HNFE Serial number: 1468 Lodpfjzzyftex Apdjag Year of manufacture: 1997 year Country of origin: Switzerland The machine is in good condition but has not been used for several years. This machine is CNC controlled and is sold complete with with the guards and accessories shown on the pictures. Please make a reasonable offer per e-mail.

Condition: good (used), Year of construction: 1997, functionality: unexamined, We offer this used Sigrist-Müller Saturn FKS450 tool grinding machine, year of construction 1997. Manufacturer: Sigrist + Müller AG Model: FKS450 Serial Number: 1460 Year of Manufacture: 1997 The machine is in good condition but has not been used for several years. It is sold with the guards and accessories shown on the pictures. Lsdjzzydvepfx Apdeag Please make a reasonable offer per email.

Condition: good (used), Year of construction: 1957, We are offering this well-maintained Vollmer CNE sharpening machine, manufactured in 1957, for sale. The machine is suitable for sharpening circular saws and band saws. Several grinding wheels are included. Ljdpfxezzxzge Apdjag If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Carbide saw grinder VOLLMER model CHC025 Lasdpfx Aozx Dx Ejpdsg

Condition: like new (used), Year of construction: 2022, operating hours: 530 h, functionality: fully functional, machine/vehicle number: 249582, Fully working. when you make reservation payment we can pack machine after 16 weeks. if you need any other information or photo,video you can contact me in Whatsapp, viber or email +37067337985 Lajdjzxxqpepfx Apdog

Condition: excellent (used), Year of construction: 2000, operating hours: 25,943 h, functionality: fully functional, machine/vehicle number: 175, total width: 1,350 mm, total length: 1,400 mm, total height: 2,250 mm, type of input current: three-phase, year of last overhaul: 2018, input frequency: 50 Hz, grinding spindle motor power: 1,100 W, input voltage: 400 V, overall weight: 1,450 kg, grinding spindle speed: 2,625 rpm, The machine is in perfect working order and underwent a major overhaul in 2020, during which the following parts were replaced or added: - All axes were replaced (including guides, lead screws, all bearings, and supports). - All gears and belts were replaced. - An automatic lubrication system was installed for all axes. - The internal lighting system was modified to highlight all sharp details. Laedpfxozxup Us Apdsg - LCD monitors were replaced. - The machine was fitted with an oil mist extractor. - Included is a replacement hard drive containing all the software.

Condition: good (used), Volmer CNE sharpening machine. Lodjzxba Hopfx Apdeag

Condition: excellent (used), Knife grinder Göckel model G50 elT with tilting magnet mm 3100 long Ljdpfx Ajzw Ntlopdsag

Condition: excellent (used), Carbide saw back off grinder UTMA model SC800 year 2013 Lodpszw Nf Uefx Apdoag

Condition: excellent (used), Knife grinder ABM model OP2000 with tilting magnet mm 2.000 x 170, grinding wheel motor 10 kW, segments holder, flanges for CBN and diamond wheel, magnetic separator, year 2020 Laodpfx Apezw I Rcodog

Condition: used, Year of construction: 2015, Special feature: Higher splash guards and splash protection under the linear guide Lodpfxozwm Erj Apdeag 4 pieces of grinding wheel holders Sleeve with partial disc Shaft 30 mm PLUS: Grinding spindle 40 mm

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, overall weight: 250 kg, coolant pump power: 1 W, working width: 80 mm, grinding wheel diameter: 125 mm, number of planer blades: 5, input voltage: 400 V, type of input current: three-phase, operating speed: 15 mm/s, grinding length: 630 mm, warranty duration: 12 months, input current: 2 A, spindle speed (max.): 3,000 rpm, spindle speed (min.): 3,000 rpm, input frequency: 50 Hz, spindle height adjustment: 125 mm, AUTOMATIC PLANING KNIFE GRINDING MACHINE Knife Grinding Length is 630 mm AVB-PGM630 is specially designed to grind the planer knives up to 630 mm in length for wood, metal, and paper industries. It is constructed with a linear rail block system for high efficiency and long life. Knives mounted on the plate could be rotated +/- 90 degrees. Also, complete with its multiple knife mounting attachment, it is possible to grind at most five pieces of planer knives at one time. There are 11 various speeds up to 11 mt/min with a microprocessor control coolant ready system. AVB-630PGM AUTOMATIC PLANER KNIFE GRINDER Equipped with a CNC linear Bearing system AVB-630PGM is specially designed for grinding the planer knives up to 60 cm in length. Complete with a multiple knife mounting attachment system. It is possible to grind at most five pieces of planer knives at one time. GENERAL FEATURES • Automatic planer knife grinding up to 600 mm • Speed control between 0-11 Mt/min. • Mechanical knife attachment • Microprocessor Controlled • Grinding Head riding on linear rails • High precision of 0,02 mm infeed amount • Non-corroding and hardening plating on all mechanical components • CNC bearing system extends machine lifetime and enhances the grinding quality • Possibility to attach a maximum of 5 pieces of blades on the same plate • Rigid machine base • Production confirmed with CE standards TECHNICAL SPECIFICATIONS • Grinding Length 600 mm • Plate dimensions 60*80*600mm • Grinding Wheel Diameter Ø100/150mm • Motor Quantity 3 • Grinding Speed 0-11m/min. • Automatic Infeed 0,02mm • Operating Voltage 380 V ,50-60 Hz, 3 Phase • Coolant Tank Capacity ͠ 30 Lt. • Net/Gross Weight 430/450 kg • Dimensions 60*160*140 cm Laodpezwm Dusfx Apdjg MOTORS on THE MACHINE Grinding Wheel • Grinding Wheel 1,1 KW- 2800 rpm D:Ø100/150 mm • Coolant 0,09KW-2800 rpm d:Ø20 mm • Grinding head horizontal movement 0,37KW-2800 rpm H:60-80mm

Condition: used, Year of construction: 2000, operating hours: 38,547 h, functionality: fully functional, machine/vehicle number: 1, grinding wheel diameter: 125 mm, total width: 950 mm, total length: 1,250 mm, total height: 1,870 mm, type of input current: three-phase, input current: 4 A, year of last overhaul: 2018, input frequency: 50 Hz, grinding height: 24 mm, grinding spindle motor power: 2,400 W, input voltage: 400 V, overall weight: 950 kg, grinding spindle speed: 3,972 rpm, spindle speed (max.): 3,972 rpm, The machine is equipped with a second pusher that allows for adjustable single-pass sharpening of the cutter and includes automatic coolant mist extraction. Lajdozwhuhjpfx Apdsg It has always been operated with cooled oil and cleaned with a COMAT machine. Operating speed [mm/s] 0.5–20 mm/s Saw blade diameter [mm] 80–500 mm

Condition: used, Year of construction: 1999, 50MM GRINDING ARBOR 300 MM MAX. GRINDING LENGTH 330 MM MAX. TOOL DIAMETER GRINDING MOTOR 1,1 KW FEEDMOTOR 0,045 KW COOLING PUMP 0,08 KW DEVIDING DISK FOR AUTOMATIC HEAD ROTATION DIMENSIONS ARPR. 1,40 X 0.9 X 1,40 M Lasdezwfy Ispfx Apdsg WEIGHT APPR. 375 KG

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 560 kg, total width: 1,200 mm, total length: 1,600 mm, total height: 1,800 mm, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, We offer this very good Vollmer Unimat S sharpening machine, year of construction 2002. If you have any questions or need more information, feel free to send us a message or give us a call. Lodpozwczvsfx Apdoag

Condition: used, Year of construction: 2008, WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Lsdpfozvpw Ijx Apdjag Tool diameter min. 90 Tool diameter max. 300 mm Tool length 0 - 240 mm Radial measuring range (radius) 150 mm Non-contact measurement of tool dimensions, radius (R) and height (H), with display on electronic digital displays. Electronic digital displays providing information on tool radius and height. HSK63 tool holder for PowerLock tools. NEW: PowerLock adapter HSK63, shank D=50 x 260 mm.

Condition: used, Technical specifications: Max. length of sharpened knives: 600 mm Diameter of grinding wheel: 120/150 mm Manual feed Lodpfxezvm Tmj Apdsag Power supply: 380 V Total power: 2 kW Overall dimensions: Length: 900 mm Width: 700 mm Height: 1150 mm

Condition: excellent (used), Straightening machine, Optimatic RMO 880. Lodpszu Ix Iofx Apdeag