Wl West & Sons

Condition: used, Year of construction: 2005, machine/vehicle number: 5819, functionality: fully functional, power: 5.8 kW (7.89 HP), input voltage: 400 V, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, For sale is a professional and reliable Hebrock Euro 2000 (Plus) edge banding machine from 2005. Cjdpfx Ae Ah Sgrelfohd The machine is in very good, fully functional condition. The glue pot is in perfect condition and heats up quickly and cleanly. The machine can be tested and demonstrated on-site while powered. Features & Highlights: Manufacturer: Maschinenbau Hebrock GmbH (Made in Germany) Model: Euro 2000 / Plus Year of manufacture: 2005 Machine no.: 5819 Glue pot: Quick-heating hot melt glue container (heating time approx. 6 minutes) – fully functional and clean Cutting unit: Pneumatic roller cutting / sawing unit for precise trimming of front and rear edges Routing unit: High-frequency flush and radius routing unit (flush, bevel, and radius routing) Operation: Ergonomic control panel with digital adjustment for quick format and edge changes Edge material: Suitable for roll and strip material (e.g. ABS, PVC, veneer, wood strips) Chassis / Transport: Includes device for easy transport within the workshop Technical data: Connection: 230 / 400 V – 50 Hz Power consumption: 5.8 kW Current: 11.6 A Feed speed: approx. 10 m/min Extraction nozzle: Ø 100 mm Included: Dust extraction system with filter bag (see pictures). Condition & Collection: Condition: Used, well-maintained, ready for immediate use. Test run: A test run / demonstration on-site is highly recommended and can be arranged by appointment. Location: 65719 Hofheim am Taunus Sale: Collection by buyer. Loading is possible on-site using a forklift / pallet truck. Legal note: Sale is made excluding any warranty or liability for defects.

Condition: used, Year of construction: 2019, HOMAG EDGETEQ S-380 / KDF 650 C (1650 E), year of manufacture 2019 Csdpfxo Ah Rcas Alfehd Feed rate: 8–18 m/min. Workpiece thickness up to 60 mm, depending on application limits. Edge material: rolls 0.3–3 mm, strips 0.4–12 mm. Working height 950 mm, compressed air minimum 6 bar. Equipment: Joint milling cutters (2 × 2.2 kW), QA65 gluing unit with pressure zone, BALTI hot-melt unit, trimming unit, multi-stage and profile milling cutters, profiling and glue joint trimming blade, edge trimming unit and spraying equipment. Meter readings according to the photo dated October 22, 2026: 1,780 hours of processing time, 5,495 hours of feed time. The EDGETEQ is offered separately. Location: Basel area, Switzerland. Inspection by appointment only. Price upon request.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: CE marking, documentation/manual, Holzher Auriga 1308 XL Cjdj Ah Hi Ispfx Alfshd Suitable for polyurethane coatings.

Condition: used, Year of construction: 2012, HOMAG KAL 211 Ambition 2274, manufactured in 2012. Single-sided edge banding machine with joint milling units, A20 gluing unit, HL84 capping units, BF10 pre-milling units, FK11 profile milling units, PN10 profile trimming knife, glue joint trimming knife, and buffing unit. Feed rate: 20 m/min Overall length: 8,635 mm Chsdpfx Alo Ahzqlofod Control system: powerControl PC22 / woodCommander Workpiece thickness: 12–40 mm (standard configuration); expansion to 60 mm and limited 8-mm processing according to the original configuration. Counter readings: 60,422 operating hours, 12,789 feed hours, and 2,614 processing hours. Price upon request.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Single-sided edge banding machine with full equipment. Chedpfs Ahytwsx Alfjd Material dimensions: Roll material: - Paper and plastic edge bands 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm - Edge strips 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine equipment: Infeed guide, adjustment automatically via program Release agent application Joint milling unit with 2 motors, 4 KW each Air nozzle for removing loose particles Gluing unit with glue application of 1.8 L, with QUICK-LOCK with single-roller / strip magazine 1 main pressure roller and 3 follow-up pressure rollers Pressure zone adjustment automatically via program Trimming unit with 2 motors, 660 W each, swiveling from 0 to 8 degrees Copy milling unit with 2 motors, 180 W each, and 2 motors, 400 W each max. workpiece thickness 60 mm max. working speed 20 m/min. Automatic adjustment via program Profile trimming unit Glue joint trimming unit Cleaning agent application Smoothing unit with 2 motors, 180 W each Control system ICOS open TS, PC-based

Condition: good (used), Code: 0514 Brand: FMB - ITALY Model: BM 4/L - CE Standard Automatic edge bander for wood, Pvc, veneer, Abs, panels, joinery, furniture, bespoke furnishings, doors, kitchens and various other applications – CE Standard Technical data: Panel height 10–60 mm Cjdpfx Als Ahytajfohd Max edge thickness 10 mm Min panel length 120 mm Min panel width 60 mm Glue tank capacity 2 kg Feed speed 14 mt/min Electric roller press lifting Composition: Gluing unit – Glue tank 2 kg – PVC shears End-trimming unit with 2 motors 0,5 Hp 12000 rpm – Cut inclination 0–5° Trimming unit with 2 motors 1,5 Hp 12000 rpm Bevelling unit with 2 motors 0,5 Hp 12000 rpm Space available for additional units Tilting sanding unit from –10° to +45° – Sanding is carried out using a straight or shaped pad which acts directly on the abrasive belt Oscillating belt Pneumatic belt tensioning Telescopic roller conveyor for supporting large panels Suction inlet diameters n°1 150 mm – n° 1 120 mm Compressed air 6 atm Overall dimensions mm 5900 x 1250 x 1700 h Weight kg 1700

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1000042371, functionality: fully functional, Biesse Akron 1130 J Machine Number 1000042371 Year of Construction 2020 Panel height mm 8 - 50 PVC/ABS mm 0.4 - 3 Multi-Velocity Kit 9 m/min Adjustable working height Variable inlet guide Side roller with idle wheels for panel support RT01 grinding group Coiling plate Infrared lamp to heat the edge SP01 hot-melt adhesive bonding group Edge pressure group on straight profiles with pressure rollers Cedpfxo Ahuqps Alfshd IT01 tilting adjustment unit RF01 2-axis tilting motor group AR01 multifunction rounded-edge group (edge trimmer + deburrer) RB01 edge scraper group RC01 glue scraper group SZ01 brush group ADZ01 anti-adhesive spray group Electrical and mechanical predisposition for PUR adhesive system Pro-Nesting Kit LPT01 cleaner liquid nozzle spray group

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed rate X-axis: 18 m/min, overall weight: 1,900 kg, Equipment: CE marking, The machine can be tested. Automatic engine start-up according to the loaded work schedule. Management of automatic adjustments for groups equipped with numerically controlled axes. List of programs with manual and/or automatic start-up. Error diagnostics with codes and explanatory comments. Statistical data related to production. Periodic maintenance operations assisted by software. GEAR MOTOR for track movement with a working speed of 12-15-18 m/min, 1.5 kW motor. Vertical pressing unit with high rigidity, allowing for panel size changes without adjusting the operating units. Panel thickness: 10-60 mm Film height: 14-64 mm Edge thickness (roll form): 0.4-3 mm Edge thickness (strip form): 0.4-12 mm Panel/track contact surface: 25 mm Minimum panel length: 140 mm Minimum panel width (with length 140mm): 85 mm Minimum panel width (with length 250mm): 50 mm Feed speed: 12-18 m/min Distance between 2 consecutive panels: 650 mm Pneumatic connection: 7 bar Operating voltage: 400 V / 50 Hz three-phase + neutral Control voltage: 24 V - DC Inverter: 200 Hz EVA adhesive tank capacity: 2 kg (approx.) Adhesive tank heating time to 1/2 capacity: -10 minutes (approx.) Liquid antistatic spray unit: ADZ02 PRE-MILLING UNIT RT02 Polishes the surface to be edged before applying the adhesive. Equipped with 2 high-frequency motors of 1.8 kW each / 12000 rpm. Diamond tools: H=65 mm Z=3+3 45° for pre-milling. ADHESIVE APPLICATION, EDGE FEED AND PRESSING SYSTEM VC-511 End trimming unit: IN-801 Top/bottom milling unit: RF02 Multi-profile tool set for the top/bottom milling unit: R=2 mm + R=1 mm. End rounding unit with 2 motors: AR02 E Radius edge trimming unit: RB02 Surface edge trimming unit: RC02 Polishing unit with textile brushes: SZ02 Chsdpfj Aht Rfjx Alfjd CLEANING LIQUID SPRAY UNIT LPT02 Hot air blower.

Condition: used, Year of construction: 2016, Edge banding machine with workpiece return Manufacturer: Brandt Type: KDF660 Csdpfx Ale Ahqtksfshd Year of manufacture: 2016 Technical specifications: - Joint milling unit - Gluing unit - Pressure zone - Cutting unit - Flush trimming unit - Fine trimming unit - Corner trimming unit - Profile trimming blade - Flat trimming blade - Buffing unit - Workpiece return Note: The technical specifications and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2003, used edge banding machine Cedpe Ahpbqjfx Alfjhd Model Hebrock AKV 3003 DKF Year of manufacture 2003 Direct glue application to the workpiece including joining unit Support divider for edge material High-frequency miter saw Chip collection box (miter saw) Pneumatic roller trimming Transport chain with permanently screwed-on special chain plates Double roller pressure (ball-bearing mounted) Outrigger (extendable towards the front) Automatic central lubrication (miter saw, corner milling cutter) Quick-heating glue tank (maintenance-free, Teflon-coated) Maintenance-friendly and operator-friendly design Corner milling cutter Surface trimming blade Chip collection box (trimming blade) Max. edge thickness 8 mm min/max. workpiece thickness 10 / 40* mm Min. workpiece length approx. 200* mm Min. workpiece width approx. 70* mm Feed speed approx. 10 m/min Ready for operation in approx. 6 min Max. power consumption 12 kW Electrical connection 400 V / 3 phases / 50 Hz Dimensions (length x width) 4300 x 1400 mm Dimensions (height) 1620 mm Weight 1250 kg

Condition: excellent (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Type: TOP 3005-F Year of manufacture: 2016 Workpiece thickness: 8 - 60 mm Edge thickness: 0.5 - 3 mm Overall length: 5,000 mm Feed rate: 10 m/min Suitable for PU: Yes Suitable for EVA: Yes Gluing unit: Yes Miter saw unit: Yes Flush trimming unit: Yes Radius pull blade: Yes Corner copying unit: Yes Chsdpfx Aj Ahn D Nelfjd Surface pull blade: Yes Includes a second set of DIA milling cutters.

Condition: used, BRANDT ambition 1440 edger well-equipped, Pre-milling cutters Edge trimming unit glue application by roller pneumatic pre-trimmer Chedpj Ahm S Uefx Alfjd pressure rollers trimming cutters up-and-down milling unit 2 x corner rounding units R1-R2, adjustable from the control panel profile edgebanding unit, pneumatically activated flat edgebanding unit, pneumatically activated polishing unit max. workpiece height 60mm max. veneer thickness in roll 3mm feed rate max. 14m/min Good condition

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale is our FORMAT4 tempora F400 45.03 L edge banding machine from Felder, used in our furniture workshop. The machine was purchased in 2019. The equipment includes joint milling, trimming, flush trimming and radius milling, corner processing, as well as radius and surface scraping blades and polishing units. PERFORMANCE DATA According to the total counter of the machine control system, as of October 30, 2026: • Piece counter: 24,696 • Total edge length processed: 22,186.4 m • Operating time of chain conveyor: 415 hours 58 minutes Chjdpfx Ale Ahmv Asfsd • Operating time of main switch: 4,996 hours 3 minutes The counter readings are documented in the attached display photo. The operating time of the main switch is shown separately from the actual operating time of the chain conveyor. EQUIPMENT • m-motion control system with a 10-inch smartouch touchscreen • Jointing unit with plunge-controlled diamond cutters • Teflon-coated gluing unit for 1.5 kg of EVA granules with synchronized gluing roller • Pneumatically controlled pressure unit • Guillotine shear for roll edge material from 0.4 to 3 mm • Miter saw unit with 0°/10° cutting selection • Upper and lower flush trimming and radius milling units with manual adjustment • Corner processing unit for post-forming and softforming profiles • Radius scraping blades, top and bottom • Surface scraping blades, top and bottom • Polishing units, top and bottom • Release agent spray device • Extendable workpiece support • Edge magazine with rotary table, diameter 740 mm TECHNICAL DATA • Workpiece height: 8–45 mm • Roll edge thickness: 0.4–3 mm • Feed rate: 9 m/min • Minimum workpiece length: 140 mm • During corner processing: workpiece height 10–45 mm and minimum workpiece length 270 mm • Jointing depth, manually adjustable: 0–2 mm • Electrical connection: 400 V / 50 Hz INSPECTION AND PICKUP Location: Neuwied. Inspection by appointment only. Pickup only. Transportation and loading must be arranged in advance.

Condition: excellent (used), HOLZ-HER TRIATHLON 1486 V – Industrial Edge Banding Machine For sale: a professional, industrial single-sided edge banding machine from the German company HOLZ-HER, model TRIATHLON 1486 V. Identification data: Manufacturer: HOLZ-HER Model: TRIATHLON 1486 V Year of manufacture: 2003 Identification number: 172-0312 Machine number: M 109 Type: industrial single-sided edge banding machine Equipment and machining capabilities: pre-milling unit, Cedpo Ahlyrefx Alfshd gluing station, edge trimming units, cutoff saws, corner rounding unit, profile sanding unit, oscillating unit, polishing brushes, programmable control with operator panel. The machine is designed for industrial edge banding of furniture panels and carpentry elements. Technical condition: The machine is in good working order. It can be inspected before purchase.

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 210/2003, functionality: fully functional, operating hours: 6,635 h, power: 29 kW (39.43 HP), input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 3,000 mm, workpiece length (max.): 5,000 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, actuation type: electric, total height: 2,223 mm, total length: 9,420 mm, total width: 1,368 mm, overall weight: 4,350 kg, Equipment: CE marking, documentation/manual, HOLZ-HER ACCURA 1556 Premium – Year of manufacture 2020 – Very well maintained We are offering our HOLZ-HER ACCURA 1556 Premium edge banding machine, manufactured in 2020, for sale. The machine has always been treated with great care by its dedicated operator and has been fully maintained by the supplier throughout its entire service life. The machine has always been kept in excellent condition, and there have never been any major incidents or serious machine damage. Technical improvements and upgrades Reinforced pre-milling motors: The originally installed pre-milling motors were generally too light. Therefore, approximately two years ago, these were replaced with a heavier and improved type. These motors function excellently and represent a significant technical improvement compared to the original design. Automatically switchable profile milling cutters (factory option): The machine is equipped as standard with the option to automatically switch between the profile milling cutters with a radius of 1 mm (R1), a radius of 2 mm (R2), and chamfer milling cutters. This allows for easy and quick switching between different edge finishing operations without manual adjustment of the milling heads. Additional Riepe brush system: Riepe has installed an additional brush system specifically for cleaning and processing edge material with a deep surface texture. Condition and maintenance Chjde Ahhwzjpfx Alfsd The machine has always been operated carefully, well maintained, and serviced according to the maintenance instructions by the supplier. Thanks to the consistent maintenance, careful operation, and implemented technical improvements, this is a well-maintained edge banding machine with extensive equipment. The machine can be viewed and demonstrated in working order by appointment. If you are seriously interested, we will be happy to provide additional information and photos.

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Straight drawing blade for glue joint Cedpfx Ale Ahgf Isfshd Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Equipment: ABS, documentation/manual, Holzher sprint 1329 premium edition Cedpfxe Ahfdgo Alfshd

Condition: used, Year of construction: 2001, Edge banding machine BIESSE ARTECH Ergho 3 - Manufacturer: Biesse - Type: ARTECH Ergho 3 - Year of manufacture: 2001 Codps Agwd Defx Alfshd - Edge banding and edge magazine CB-700 - Flush trimming unit IN-701 Cut and wrap adjustable from 0-3.6-11-15 degrees with 12,000 RPM. - Flush milling unit RI-700 - Chamfer milling unit SI 700 - Surface scraper blade RBK-501 - Buffing unit - Working height approx. 900 mm - Workpiece thickness 10 - 50 mm - Workpiece width min. 50 mm - Workpiece length min. 150 mm - Edge thickness (roll material) 0.4 - 3 mm - Edge thickness (strip material) 0.4 - 15 mm - Edge width 13 - 55 mm - Feed rate 10 m/min - Electrical supply 400 V - 50 Hz - Connected power 6 kW - Compressed air connection 6 bar - Extraction 1 x D = 80 mm - Overall length of the machine approx. 4080 mm - Weight 1640 kg

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: 919/2-602, functionality: fully functional, operating hours: 7 h, Equipment: CE marking, documentation/manual, HOLZ-HER, STREAMER 1057 XL Classic, year of manufacture 2026, showroom machine for sale. Technical data Machine type: Edge banding machine Model: HOLZ-HER STREAMER 1057XL classic Edge thickness, roll material: 0.4 – 3 mm Edge thickness, strip material: 0.4 – 6 mm Edge height: max. 65 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Workpiece length: min. 160 mm Feed rate: 10 m/min Voltage / Frequency: 400 V / 50 Hz Machine configuration & equipment Control system: Edge Control BC 15 with 15.6" touchscreen (color display 16:9, network-enabled, password-protected) Setup system: VISE (Visual Setting Mode) – digital logbook for setting values and digital counter Chedpfo Agnllsx Alfod Infeed area: Retractable workpiece support (distance 600 mm) Long infeed fence (1252 mm) BS501 guide system for right-angled feeding of narrow parts Jointing unit: FG201 with 2 milling heads (co-rotating/counter-rotating), incl. diamond-tipped milling cutters (Ø~70×48×30 mm) and Air Stream system Edge feeder: MG301 for roll and strip material with support plate (Ø~820 mm) Glue application system: Glu Jet GJ301 (hybrid technology for EVA and PUR adhesives in cartridges and as granules, fast heating within 3 minutes, automatic regulation of glue height and automatic refill function) Pressing unit: DW201 pneumatic (1 driven roller, 2 conical pressure rollers) Trimming unit: KA501 pneumatic (2×0.45 kW, pneumatically swiveling 0 - 10°) Multi-function milling unit: FR201 (2×0.6 kW) Profile milling unit: FF201 (1×0.35 kW) Finishing: Scraping unit ZK301 (with 2 supports and digital displays) Surface scraping blade FK702 Lighting: LED lights (3 pcs) for the infeed and processing area

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: KK00054470, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 612 kg, Equipment: CE marking, documentation/manual, SCM Minimax me 35 TR edge banding machine in CE version, manufactured in 2026. Equipped with a glue scraping unit with an automatic on/off system, a scraper with an automatic on/off system, a sawing unit with an automatic on/off system, internal machine lighting, an infrared lamp, and nesting copier kits for the routing unit and the band scraper. Chjdpfe Agniusx Alfsd

Condition: used, Year of construction: 2007, Workpiece thickness: 8 – 50 mm Edge thickness: 0.4 – 3 mm (max. 3 x 30 / 1.0 x 55) Fixed lengths: max. 3 x 45 mm Feed rate: 11 m/min. Connected load: 10.5 kW Compressed air: 6 bar Weight: approx. 1250 kg Csdpfx Alj Agli Njfjhd Machine length: 3920 mm Storage location: Nattheim

Condition: good (used), Code: 0197 Brand: CASADEI INDUSTRIA Model: K 30/10 HF - CE Standard Automatic edge bander for straight panels, with glue tank for wood, veneer, pvc, melamine, abs and various - CE Standard Technical data Automatic belt conveyor for panel feed - Speed 7 mt/min Panel height mm 10/45 Chjdpfj Aggc Dex Alfod Edge thickness up to 3 mm Gluing unit: Glue tank capacity kg 1,2 - Electronic temperature control Front and rear pneumatic end cutting unit with circular Vidia blades - Micrometric cutting depth adjustment -End cutting speed 9000 rpm - End cutting blade diameter 80 mm Upper and lower end trimming unit - Vidia cutters diameter 80 - Possibility of combined radius/chamfer cutters - End Trimming speed 9000 rpm Total power Kw 2,2 N° 3 suction ports diameter 60 mm Panel support roller conveyor Overall dimensions mm 2150 x 800 x 1200 h Weight kg 405

Condition: good (used), Code: 0510 Brand: BIESSE Model: POLYMAC SINGLE 89 - N - CE Standard Edgebander for straight, shaped, and round panels, for Pvc, Abs, veneer, and wood edges, for woodworking shops, custom furniture, furniture, kitchens, shelves, and various applications - CE Standard Features: Motorized feeder with adjustable speed Pneumatic trimming unit for trimming edged panels Digital electronic counter for setting the desired cutting length Work surface tilting from 0 to 45° Adjustable edge feed speed Cedpfx Ae Agcf Rjlfohd Technical Data: Edge height 10-60 mm Edge thickness 0,4-3 mm Min radius 20 mm Min panel length 300 mm Feed speed 2-18 mt/min Total power 4 Kw Compressed air 6 bar Overall dimensions mm 1700 x 950 x 1300 h Weight kg 350

Condition: good (used), Year of construction: 2007, machine/vehicle number: 6497, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 7 m/min, actuation type: manual, total height: 1,300 mm, total length: 3,100 mm, total width: 1,320 mm, overall weight: 550 kg, Equipment: CE marking, documentation/manual, Hebrock edge banding machine, model Top 2000 Plus, Edge banding machine with hot-melt adhesive application to the workpiece for edge material up to 3 mm thick. High-frequency cutoff station (flush cutoff station), angled table rollers, automatic edge transport, stepless electronically adjustable temperature display with LED actual value display, protective cover, - Pneumatic cutoff station for edge thickness up to 3 mm (pre-cutoff of the roll) - High-frequency combination flush trimming station with interchangeable blade cutter - Surface scraping blade (without pneumatic extraction device) Minimum workpiece width: 90 mm, Workpiece thickness: 10 - 45 mm, Minimum workpiece length: 260 mm, Chjdpfxs Agakqo Alfjd Maximum edge material height: 50 mm, Dust extraction port: D = 100 mm, Compressed air connection: minimum 7 bar Weight: approximately 550 kg As inspected, ex works Seevetal, Ex works, excluding transport, Subject to prior sale.

Condition: used, Biesse Akron 1300 Edgebanding Machine Pre-milling cutters Replaceable glue pot Roller glue application Pneumatic pre-trimming guillotine Pressure rollers Final trimming saw R1-R2 top-bottom milling unit Chedpe Af U E Tofx Alfed Multi-profile trimming cycle Flat trimming cycle Polishing unit Max. component height: 60mm Max. edgeband thickness (roll): 3mm Feed rate: 12m/min Machine length: 410cm Connected power: 8.6KW Machine inspected, ready for operation.