Metalequip Dcs

Year of construction: 2009, condition: ready for operation (used), Combined automatic float and laminated safety glass (VSG) cutting line manufactured in 2009. This LISEC Combined VSG & Float Glass Cutting Line features a robust configuration with breakout, transport, and trimming modules. It is currently installed and running in active production, allowing for turnkey inspection. If you are looking to get high-quality glass processing capabilities, consider the LISEC Combined VSG & Float Glass Cutting Line we have for sale. Contact us for further details. - Plant Configuration: Combined automatic float and laminated safety glass (VSG) cutting line with breakout, transport, and trimming modules- System Manufacturer: LISEC Austria GmbH / LISEC Maschinenbau GmbH- Years of Manufacture (Line Integration): 2009 & 2016 (mixed installation)- Operational Status: Currently installed and running in active production (turnkey inspection possible)- Standard Line Voltage: 400 V / 50 Hz (3/N/PE~ 400V, Control: 24V AC/DC)- Operating Compressed Air: 6.00 – 8.00 bar- Total Cumulative Installed Weight: > 28,400 kgMODULE BREAKDOWN & INDIVIDUAL SPECIFICATIONS:1. VSG (Laminated Safety Glass) Processing Section:- Pos 01: LISEC PTV-60/30RE (YOM: 2009) * Type: Laminated glass cutting machine (Verbundglasschneidanlage) * Weight: 5,640 kg | Electrical: 400 V / 50 Hz- Pos 02: LISEC VZ Linie 2 (YOM: N/A) * Type: Assembly unit / line connection section- Pos 03: LISEC LKT-45/45TS (YOM: 2009) * Type: Processing / support air-cushion table * Weight: 3,200 kg | Connected Load: 61.28 kVA | Air: 8.00 bar- Pos 04: LISEC VB-33 (YOM: 2009) * Type: Laminated glass line sub-assembly * Weight: 2,200 kg | Connected Load: 17.00 kVA | Air: 6.00 bar- Pos 05: LISEC FASV-33 (YOM: 2016) * Type: Automated protruding PVB film trimmer/remover * Weight: Not specified | Connected Load: 0.83 kVA | Air: 6.00 bar- Pos 06: LISEC VB-33 (YOM: 2016) * Type: Cutting machine for laminated glass * Weight: 2,200 kg | Connected Load: 18.83 kVA | Air: 6.00 bar | Max Load: 43 kg/m²- Pos 07: LISEC AL-32/33N (YOM: 2016) * Type: Glass stop locator and positioning section * Weight: 1,830 kg | Connected Load: 25.88 kVA | Air: 6.00 bar- Pos 08: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar | Max Load: 50 kg/m²2. Float Glass Processing & Transfer Section:- Pos 09: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar- Pos 10: LISEC BTA-40/26 (YOM: N/A) * Type: Horizontal transport / support table * Weight: Not specified | Electrical: Not specified- Pos 11: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 9.05 kVA | Air: 6.00 bar- Pos 12: LISEC BTS-37/33 (YOM: 2016) * Type: Manual breakout table with integrated breaking bars * Weight: 1,543 kg | Connected Load: 15.75 kVA | Air: 6.00 bar- Pos 13: LISEC LKT-10/33 (YOM: 2016) * Type: Horizontal air-cushion transfer table * Weight: 250 kg | Connected Load: 4.50 kVA | Air: 6.00 bar | Max Load: 33 kg/m²- Pos 14: LISEC BTA-40/26 (YOM: 2009) * Type: Horizontal belt transport conveyor unit * Weight: 1,154 kg | Connected Load: 2.30 kVA | Air: 8.00 bar | Max Load: 50 kg/m²- Pos 15: LISEC TBY-26/12 (YOM: 2009) * Type: Intermediate transport module * Weight: 255 kg | Connected Load: 0.00 kVA | Air: 6. Rcjdpfx Ao Agixyoirsh

Year of construction: 2014, condition: used, Heizinger plate shear B13-3100 Hydraulic plate shear – Heizinger Type/Model: B13-3100 Condition: Used Year of manufacture: 2014 Rjde Agf Urjpfx Airsch Technical data: Max. cutting length: 3,100 mm Max. cutting capacity in steel: 13 mm Reach: 250 mm Cutting angle: approx. 2.1° Drive: Hydraulic Inquiry item: Transportation costs will be provided in a customized quote.

Condition: excellent (used), Max. workpiece diameter: 50mm Rsdpfx Aio Af U Hxerech Max. workpiece length: 600mm

Condition: used, Sliding table with 2 stops Rcodpfe Afw S Asx Airjh

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Rcedpfxo Afw Scs Airsh

Condition: used, Year of construction: 2026, MDC1500/400 Metal Chip Extractor The MDC1500/400 metal chip extractor is an industrial machine designed for intensive use at grinding and welding stations, as well as wherever effective removal of metal chips and dust is required. This model provides high extraction performance, stable airflow and filtration adapted to the demanding conditions typical of metal production and processing. Key Advantages Two-stage filtration – quick, tool-free replacement of the two filter cartridges improves chip separation efficiency. High extraction performance – up to 2,200 m³/h without a bag, ensuring stable operation even when handling large quantities of metal chips. Mobile design – the compact wheeled housing makes it easy to move the unit between workstations. Large collection container – extends operating time without the need for frequent emptying. Dual suction inlet, 2 × 100 mm – allows two machines to be connected simultaneously. Design and Technology The MDC1500/400 is equipped with a high-performance motor operating at S1 100%: 1.5 kW and S6 40%: 2.1 kW, ensuring stable extraction performance even during extended operation. The 400 V / 50 Hz power supply provides reliable operation and consistent impeller performance. The dual-inlet system, 2 × 100 mm, enables efficient extraction from two sources. The optimised suction system design allows an airflow rate of up to 2,200 m³/h without a bag. When operating with a bag or hose, the extraction capacity is 1,500 m³/h, which is still fully sufficient for workstations generating large quantities of metal dust and chips. Precision and Performance The MDC1500/400 metal chip extractor has been developed to maintain a stable, linear airflow. Its robust housing minimises vibrations, while the precisely designed filtration system ensures optimal capture of dust generated during grinding, deburring and welding. As a result, the unit effectively helps keep the workstation clean and improves the working conditions for the operator. Applications The MDC1500/400 is a versatile, professional extraction unit for grinders and machining workstations operating in continuous-duty conditions. It is ideally suited for: Rceds Afnrmspfx Airjh grinding tables, welding tables, bench, belt and disc grinders, manual and mechanical processing workstations where metal chips and swarf are generated. Standard Equipment two filter cartridges, large container for metal chips and swarf, compact and mobile housing, dual suction inlet, 2 × 100 mm. Technical Data Parameter Specification Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400 V / 50 Hz Suction inlets 2 × 100 mm Extraction capacity without bag 2,200 m³/h Extraction capacity with bag/hose 1,500 m³/h Dimensions 850 × 670 × 765 mm Weight 72 kg PLEASE NOTE!!! This machine is a returned item; it is second-hand, has dirty filters and experiences vibrations due to the turbine being out of balance. NO WARRANTY AND NO RETURNS!

Condition: excellent (used), Year of construction: 1999, cross-wedge rolling machine It hot-rolls semi-finished products for shafts, pins, automotive parts, and agricultural blades. It can roll a shaft shape from a round bar in just a few seconds. Rcodpfx Aj Ad I E Reireh Working diameter: cca 15 - 70 mm Working length do 400-600 mm Max. rolls diameter cca 700-800 mm Workpiece weight 1340 kg Machine weight cca 12.000 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Oil mist and fume extraction unit for CNC machines, Plymovent brand separator filter. Designed for purifying air from metalworking processes involving high-viscosity, contaminated, or burnt oil, including: CNC machines for cutting, drilling, and sharpening; metal forming machines; oil mist generated by heat and surface treatment. Simple to operate and reliable filter design. Rcodpe Ad Dnbsfx Airsh Filter housing made of galvanized steel sheet coated with powder paint. The filter is equipped with a pressure gauge indicating the filling level of the filter element. Fan in a sound-absorbing housing, 4 kW (three-phase) POWER: FA-6000 Capacity up to 6000 m3/h Inlet diameter - 250 mm Dimensions: Filtration unit: 0.85m x 0.70m x h-2.41m Fan: 1.20m x 1.10m x h-1.30m Stock number: 0027

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Quantity: 4 units Machine type: Mechanical stamping presses Manufacturer: Predominantly Berg & Schmid (?) MACHINE DETAILS Dimensions Length: 300 mm Width: 200 mm Height: 300 mm Weight Rcodpfx Aio Adu Eksrsh Weight: 20 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GRINDING AREA Grinding wheel diameter: 170 mm Table dimensions: 400 × 170 mm MACHINE DETAILS Rcjdpfx Ao Adutzoirsh MANUFACTURER Brand: Münzenmaier Machine type: Steel grinding machine DIMENSIONS AND WEIGHT Length: 800 mm Width: 600 mm Height: 1,500 mm Weight: 150 kg

Condition: used, GTI Oil Mist Collector GT 10L, 1000 m³/h, Used machine Manufacturer: Glob Tec Industriemaschinen GmbH (GTI) Type / Model: GT 10L Rcjdo Adrtxepfx Airoh Year of manufacture: 2020 Serial Number: 20200046 Condition: Used, good condition Dimensions and capacity: * Overall dimensions: 1300 x 930 x 830 mm * Flow rate: 1000 m³/h Technical and operating parameters: * Connected load: 0.5 kW * Voltage: 200 - 277 V * Frequency: 50 / 60 Hz * Max. operating current: 2.5 A * Max. back-up fuse: 16 A

Year of construction: 2022, condition: ready for operation (used), Compressed air station manufactured in 2018. This Ingersoll Rand D480EC-A is part of a complete turnkey industrial system, featuring a primary rotary screw compressor, air treatment dryers, and buffer tanks. It includes a 2,000-litre pressure vessel and multiple refrigeration air dryers. If you are looking to get high-quality compressed air capabilities, consider the Ingersoll Rand D480EC-A machine we have for sale. Contact us for further details. Rcedpfx Ais Adrpaereh INGERSOLL RAND RS30i-A9.6-TAS- Machine Type: Oil-Flooded Rotary Screw Air Compressor (Total Air System / TAS Configuration)- Nominal Power / Input Shaft Power: 30 kW (40 HP)- Maximum Allowable Working Pressure: 9.6 bar (138 psi)- Flow Rate / Air Capacity (FAD): ~4.7 - 5.2 m³/min (164 - 184 CFM)- Motor Speed: 2970 rpm- Electrical Supply: 400 V / 3 Phase / 50 Hz- Gross Mass / Package Weight: 1150 kg- Sound Level: 69 dB(A)- Integrated Features: Xe-70M Microprocessor Controller, Integrated Refrigerated Air Dryer, Moisture Separator, Dual-Stage Coalescing Air Filters, Heavy-Duty Pre-Filters, High-Efficiency TEFC IP55 Main Motor- Piping Connections: 1.5" NPT DischargeINGERSOLL RAND RSE37n-A13- Machine Type: Rotary Screw Air Compressor- Installed Motor Capacity: 37 kW- Stage Pressure: 13 bar- Debit Volume / Air Flow Capacity: 6,90 m³/min- Suction Pressure: 1,0 bar- Full Load Current: 81 A- Motor Speed: 3600 rpm- Air End Model: EK140NK- Version: V4- Voltage / Phase / Frequency: 400V / 3 Ph / 50 Hz- Compression Medium: Luft- Total Weight: 952 kgINGERSOLL RAND D600EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,70 kg)- CO2 Equivalent: 3,016 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D480EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,20 Kg)- CO2 Equivalent: 2,129 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D240EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 0,84 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (0,40 Kg)- CO2 Equivalent: 0,710 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)STIA DRUCKBEHÄLTER 2000L- Machine Type: Vertical Compressed Air Storage Vessel / Receiver Tank- Volume: 2000 Litres- Maximum Allowable Pressure (PS): 10 bar- Test Pressure (PT): 14.3 bar- Minimum / Maximum Allowable Temperature (TS): 0 / 50 °CW+Z ROHRSYSTEM-TECHNIK DTS-40-HPI- Machine Type: High-Temperature Pressure Vessel / Buffer Tank- Maximum Allowable Pressure (PS): 16 bar- Minimum Allowable Pressure (PS): 0 bar- Minimum Allowable Temperature (TS): -10 °C- Maximum Allowable Temperature (TS): 250 °C- Volume (V): 71 L- Test Pressure (PT): 28.

Condition: used, Facing and spot welding machine Rcjdj Abba Njpfx Airjh

Year of construction: 2002, condition: good (used), functionality: fully functional, Technical details x-axis 2800 mm y-axis 2200 mm z-axis 800 mm control Heidenhain iTNC 530 table surface area 3000 x 1200 mm tool taper HSK-A-63 spindle turning speed range 18000 U/min power capacity 18 kW Rsdpfx Aie Aa Rlloroch feed range 35000 mm/min total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Additional information The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 18000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Redpfxe Aa Iiho Airech Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, feed length X-axis: 4,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, torque: 1,890 Nm, controller manufacturer: heidenhain, controller model: TNC 530, table load: 10,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 33,000 W, spindle nose: ISO 50, number of spindles: 1, number of slots in tool magazine: 136, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, X-axis: transverse movement of the table, 4000 mm Y-axis: vertical movement of the head, 2500 mm Z-axis: longitudinal movement of the column, 1500 mm W-axis: longitudinal movement of the quill, 600 mm Feed rates for X/Y/Z/W axes: 5/5/5/5 m/min Rapid traverse rates for X/Y/Z/W axes: 20/20/20/15 m/min Total number of tables: 3 – No. 1 pallet 1300 x 1600 mm (used for head changes) + No. 2 pallets 1300 x 1600 mm with 2 extensions 400 x 1300 mm Rotary table with rotation speed of 0 - 120 degrees/min Rodpfx Ao Aa Awajirsch INCLUDED ACCESSORIES: 2-spindle indexing head Quick-change system with BERG clamping jaws for mounting accessory heads Coolant passage through the spindle Chip evacuator for X=4000 mm travel RENISHAW RMP60 probe Robot tool changer with 136 positions AUTOMATIC pallet changer (1 pallet for accessory changes + 2 pallets for part machining) HEIDENHAIN TT140 tool probe CE marking

Condition: excellent (used), functionality: fully functional, FICEP PUNCHING MACHINE MODEL 801 GR Strokes per minute: 22 Rodpfxs Aa Aq He Airjch Stroke: 40 mm Punching capacity: R = 45 Throat depth: 510 Pressure: 80 tons USED MACHINE INTERNAL CODE: car 177

Year of construction: 2020, operating hours: 12,542 h, condition: used, 1. Continuous cleaning system, manufacturer: PERO AG, year of manufacture: 2020, mains connection: 400V, 50Hz, rated current 241A, system for cleaning various stamped parts, machine consists of various rinsing tanks, nozzles, and conveyor belts, various rinsing baths and nozzles for degreasing, and conveyor belts for transfer, 3 motors, manufacturer: Dietz, 1.7kW, 1 motor, manufacturer: Dietz, 1kW, 3 motors, manufacturer: Lowara, 3-3.28 kW, 1 motor, manufacturer: SEW, 0.37 kW, 2 motors, manufacturer: Elektror, 4 kW, 2 motors, manufacturer: Küenle, 0.55 kW, machine hours: 12,542, average utilization: 85%, last documented maintenance: 02/12/2025, system generally operational, follow-up work has been carried out. Rcedpfx Ais Aa Agbsrsh

Condition: used, Year of construction: 2002, overall weight: 5,000 kg, total length: 7,000 mm, total width: 1,700 mm, total height: 1,700 mm, year of last overhaul: 2026, Equipment: documentation/manual, Based on the following description, here is the machine description in Hungarian: We offer a used Schwarze-Robitec CNC 80/60 E TB MR tube bending machine, manufactured in 2002. Serial number: 2002-0410 Rsdpfx Aj Aarryoiroch Type: CNC 80/60 E TB MR Year of manufacture: 2002 Tool sets: 40x 2R 60, 90, 120, 150. 38x 2 R 107.5 If you have any questions or require further information, please send us a message or call us.

Year of construction: 2008, condition: good (used), Production Package 1 for DMC 635 V - Chip Conveyor Year: 2008 Rede Aag A Hopfx Airech Equipment Chip conveyor Auxiliary Tank Internal cooling: 17 bar High pressure pumps

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 105000, overall weight: 13,000 kg, Inotechno hydraulic press, 100-tonne capacity. Rcsdpez Tbnxjfx Airsh

Condition: used, GTI Oil Mist Collector GT 10L, 1000 m³/h, Used machine Rodpfx Aisz Syxaerech Manufacturer: Glob Tec Industriemaschinen GmbH (GTI) Type / Model: GT 10L Year of manufacture: 2020 Serial Number: 20200046 Condition: Used, good condition Dimensions and capacity: * Overall dimensions: 1300 x 930 x 830 mm * Flow rate: 1000 m³/h Technical and operating parameters: * Connected load: 0.5 kW * Voltage: 200 - 277 V * Frequency: 50 / 60 Hz * Max. operating current: 2.5 A * Max. back-up fuse: 16 A

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: B5020D, Digima B5020D Slotting Machine Professional vertical slotting machine with a 460 mm rotary table, 3 kW power, and a stroke of up to 200 mm. The Digima B5020D is a robust metal slotting machine designed for precise machining of keyways, channels, shaped surfaces, and slotting operations on steel and cast iron components. The machine is designed for use in tool shops, production facilities, maintenance departments, and for both individual and serial production. Model B5020D offers a maximum slotting length of 200 mm, four slide stroke speeds of 32 / 50 / 80 / 125 strokes/min, a rotary table with a diameter of 460 mm, and a stable construction weighing 2200 kg. Technical specifications of the Digima B5020D slotting machine: Rodpfxjz Sp Hye Airech Model - B5020 / B5020D Machine type - Metal slotting machine / vertical slotter Brand - Digima Manufacturer's code - B5020 Condition - New Supply voltage - 400 V Maximum power - 3000 W Main motor power - 3 kW Rapid feed motor power - 0.75 kW Maximum slotting length - 200 mm Number of slide strokes - 32 / 50 / 80 / 125 strokes/min Number of stroke speeds - 4 speed ranges Slide tilt range - 0–8° Working table diameter - 460 mm Vertical adjustment range of the slide block - 200 mm Distance from the face of the tool holder to the column - 480 mm Distance from the table surface to the lower part of the slide guide - 320 mm Maximum longitudinal table travel - 420 mm Maximum transverse table travel - 420 mm Maximum table rotation angle - 360° Table feed range - 0.054–1.24 mm/stroke Table rotary feed range - 0.035–0.805° Maximum size of the slotting tool - 25 × 40 mm Maximum slotting force - 5 kN Maximum table load - 400 kg Width of the keyway at the center of the table - 18 mm Net machine weight - 2200 kg Product weight with individual packaging - 2200 kg Packaging / transport dimensions - 1720 × 1220 × 1885 mm Packaging condition - Original

Condition: good (used), Year of construction: 2013, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, Exo-Zell-EROWA automation with EDM314MF30+HSC600/5 Automation kit EROWA UPC table clamping system with adapter plate ITS/Powerchuck 10 pallet changing stations 150 electrode changing stations JMS-Certa identification Measuring machine DuraMAX EDM314MF30, year of manufacture 2013 Technical data: Travel ranges XxYxZ 905x705x455mm Workpiece table: 1150x850mm Tank size 1200x900mm Filling height of the work tank 500mm Distance table/electrode holder 250/700mm Workpiece weight max. 3000kg Dimensions WxDxH 2090x3416x3100mm Machine weight 7500kg Operating hours 10,000h Control interface MF30 Backflushing filter with dirt container Integrated cooling unit Automatic tank refill Extinguishing system Co² Smoke extraction Fire protection flap Erosion generator exopuls+60A C-axis 100°/min with holding brake, direct measurement Direct measuring system in all axes HSC600/5, 5-axis, year of manufacture 2008 Control iTNC530i Milling spindle HVC140, 42000rpm Technical data: Travel range XxYxZ 650x550x400mm Travel range BxC B105+/- C endless Table diameter 410mm Distance table/spindle nose 600mm Workpiece weight max. 200kg Rapid traverse 50m/min Rotational speed B/C 80/80°/min HSK40-E 60-position tool changer Rcjdpoz Sp Haefx Airsh Oil mist extraction Minimum quantity lubrication Manual control panel with handwheel Adjustable air/cooling supply Kinematics optimization Calibration sphere for kinematics optimization Length compensation for all axes HIB cooling unit Measuring probe Renisaw OMP400 Calibration ring Performance acceptance test Transport Commissioning on site Training

Condition: excellent (used), For sale, a used bench-type demagnetizer designed to remove magnetization from steel components, tools, machine parts, and machined parts. The device features a robust, industrial-grade construction with a large work surface. Demagnetization is performed by evenly moving the component across the work surface, as instructed on the front panel. The visual condition matches the photos – normal signs of wear and tear are visible, consistent with its use. The exact unit shown in the photographs is the one being sold. Technical data: Type: Demagnetizer Model: 35136-25 B1 Device number: 10103874 Type: Bench-type (plate) demagnetizer Application: Demagnetization of tools, machine parts, steel parts, and ferromagnetic components Work surface dimensions: approximately 30 × 20 cm Applications: Rcsdpfx Aez Snczeirjh Mechanical workshops Tool rooms Grinding shops Production facilities Machine service centers Quality control