Diateh d.o.o.

Year of construction: 2002, operating hours: 10,000 h, condition: used, functionality: limited functionality, Primary unit mounted on chassis, comprising a steel apron feeder 1200 x 3800 mm, a single-deck scalper 2500 x 1250 mm, a single-toggle jaw crusher 1200 x 900 mm, a feeder underbelt conveyor 650 mm x 6.0 m beneath the apron feeder, a rubber extraction conveyor 1000 mm x 6.0 m, a stockpile conveyor 1000 mm x 18.0 m, electric motors, electrolytic starter, belts, safety guards in compliance with current standards, electrical control panel and wiring. Ncjdpjywuudefx Ah Rop

Condition: used, functionality: limited functionality, operating hours: 10,000 h, Equipment: CE marking, Single toggle jaw crusher at feed opening 1200 x 900 [mm]; weight 32 [tons], long jaws; gap adjustable up to 50 [mm], drive 110 [kW], electrolytic starter, wiring up to the main control panel, V-belts, protective covers on both flywheels; chute at the feed inlet. Machine has only processed recycled concrete to produce recycled concrete aggregate. Maintained by our service team since commissioning. Spare parts available in stock. Additionally, a spare movable jaw provided. Two pressure plates included. After a blockage caused by metal input, the bearing on the drive flywheel side is out of order and must be replaced. This repair is straightforward because, for transport purposes, the connecting rod must be separated from the main frame, allowing easy access for bearing removal. Ncsdpfxsywup Ie Ah Rop

Condition: new, functionality: fully functional, power: 1.1 kW (1.50 HP), Year of construction: 2026, G450 Gemini table for gold beneficiation and seperation Ncedpfx Ahjytnn Ie Rsp

Condition: ready for operation (used), A Wassmer surface grinding machine for the pre-grinding process in brick production is available. Stages: 1, wheel diameter: 700mm, feed speed: approx. 5m/min, drive: belt. An on-site inspection is possible. Njdpfx Ahsyr Rw No Rocp

Year of construction: 2026, condition: new, functionality: fully functional, Husqvarna FS 400 LV Floor Saw incl. DIA NEW Husqvarna FS 400 LV Floor Saw incl. DIA – NEW | 187 mm cutting depth | 500 mm blade | Honda GX 390 petrol engine Item number: 967 79 65 01 Technical Data: Manufacturer: Husqvarna Model: FS 400 LV Condition: NEW Nedpfx Ahoynwpws Rscp Operating weight: 99 kg Blade diameter: 500 mm Bore: 25.4 mm Max. cutting depth: 187 mm Engine: Honda GX 390 petrol Engine output: 8.7 kW (approx. 11.8 HP) Fuel: Petrol Fuel consumption: approx. 4.3 l/h Water tank: integrated Starting system: recoil start Key Features & Equipment: - Robust floor saw for precise cuts in asphalt & concrete - Powerful Honda GX 390 engine – reliable & efficient - Includes cutting blade – ready for immediate use - Large cutting depth range up to 187 mm - Integrated water tank for efficient cooling - Ergonomic design for comfortable operation - Compact construction – ideal for construction sites & renovation work - Made by Husqvarna – proven quality & durability Applications: ✓ Road & civil engineering ✓ Asphalt & concrete cutting ✓ Sewer construction & pipe laying ✓ Renovation & repair works ✓ Contractors, municipalities & landscaping ✓ Joint cutting on small to medium-sized sites Location: Warehouse D-46514 Schermbeck (NRW) – inspection & collection possible Delivery: Germany-wide & international delivery on request Price basis: ex works Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices excl. VAT Other sizes & models available! ➡️ Floor saws with various cutting depths & engine options – also electric & diesel powered Buy Husqvarna floor saws | FS 400 LV NEW | Floor saw with Honda engine | Asphalt & concrete cutter | Floor saw with 500 mm blade | Floor saw with 187 mm cutting depth | Husqvarna FS series | Petrol engine floor saw | Professional cutting technology Your reliable partner for cutting & separation technology: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Enquire now & secure immediately available new equipment! We are happy to offer you a virtual inspection of the machine via video call if required.

Condition: used, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 105 kg, Year of construction: 2025, machine/vehicle number: A40Z1610, 12 months warranty, except for the engine. Nedjylt Iqjpfx Ah Rjcp

Condition: like new (used), functionality: fully functional, As-new grinding wheels without wheel flanges. Sound test has been performed, everything is in order. Ncedpfx Asx Npaxeh Rep

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1737522032, Infinitely height-adjustable and lockable saw head with splash guard. Lateral handwheel feed for convenient operation. Removable water tray, easy to clean. Crane lugs for easy relocation on the construction site. Ncsdew Rnzcopfx Ah Rep

Condition: used, functionality: fully functional, Year of construction: 2023, machine/vehicle number: SN061476, 12 months warranty, except for the engine. Nedpfx Ajw Ia Rweh Recp

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, We sell diamond tools for grinding concrete, stone, and terrazzo. We manufacture universal stainless steel discs, diameter 500/5 mm, for mounting diamond grinding segments “16”, diameter 100 mm with 4 diamonds (among others), intended for very intensive grinding of hard concretes. We also produce resin-bonded corundum abrasive segments in various types. The large working surface of the diamonds allows them to be used even in heavy-duty grinders, as well as in our own models: SD50, SD40, and ZDJ60E power trowels, all operating at 230V. ALL diamond tools are manufactured specifically FOR US, to our order, by a company specializing in the production of crystalline diamonds, from which they make the grinding segments we specify. We sell diamond segments (including mounting discs) for grinding. We also offer bush hammer segments (for matting) for substrate preparations prior to applying resin, paint, or tiles. Net prices: – Diamond segment with 4 “16” segments, Ø100 mm, M8 or M10 screw mount – 70.00 PLN (EUR 17) – “16” diamond, 3x M6 screws, 2 rectangular segments – 70 PLN (EUR 17) – “16” diamond, 3x M6 screws, 3 square segments – 70 PLN (EUR 17) – “16” diamond, HTC slide mounting, with 2 diamonds – 70 PLN (EUR 17) – 100 mm cup wheel, M14 thread, double-row or turbo – 62 PLN (EUR 15) – 125 mm cup wheel, M14 thread, double-row or turbo – 72 PLN (EUR 17) – “V” diamond milling cutter, Ø180 mm – 540 PLN (EUR 129) – “V” diamond milling cutter, Ø125 mm – 198 PLN (EUR 47) – Diamond milling cutter, Ø200 mm – 470 PLN (EUR 112) – Complete stainless steel bush hammer head with double-row wheel – 160 PLN (EUR 38) – Complete stainless steel bush hammer head with triple-row wheel, Ø50 mm – 220 PLN (EUR 52) – Replacement double-row bush hammer wheel with bearings – 120 PLN (EUR 29) – Replacement triple-row bush hammer wheel with bearings, Ø50 mm – 160 PLN (EUR 38) – Universal stainless steel disc 400/5 – 480 PLN (EUR 114) – Universal stainless steel disc 500/5 – 520 PLN (EUR 124) – “Kidney” resin pad for heavy grinding – 40.00 PLN (EUR 10) – Grinding block, two M6 screw mount (corundum-resin) – 40 PLN (EUR 10) – Corundum/resin block 80x160x100 mm high (grains 1-3 mm; 3-5 mm; 5-8 mm) – 120.00 PLN (EUR 29) Nedpfx Ahjwuwuno Recp – Corundum-resin stone, grains 1-3 mm; 3-5 mm; 5-8 mm. Approx. weight 6 kg, size 100x100x270 mm – 190.00 PLN (EUR 45) Prices are subject to change. All listed items are in stock in Poznan and can be shipped COD or by prepayment, as well as collected in person from Poznan. Please feel free to contact us by email. We operate 24/7.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, Beveling Grooving Machine for Expansion Joints in Concrete Floors and Channel Cutting in Concrete. On 4 wheels +2, includes 125 mm milling cutter - Four-wheel design. Compatible with vacuum extractors. Fully galvanized construction, stainless steel cover. Vacuum port included. - Enables precise chamfering of expansion joint cuts. Equipped with a robust, professional-grade motor. Large depth adjustment range (up to 30 mm) and adjustable handle angle. Front and rear guides enter the cut to ensure straight milling and allow for angle and width adjustment. Extensive handle tilt adjustment. Supplied with 125 mm cutter. - Net price: 4,100.00 PLN (EUR 976) - Please send inquiries preferably by email. Beveling Grooving Machine for Expansion Joints in Concrete Floors, on 4 wheels +2, includes 180 mm milling cutter - Four-wheel design. Compatible with vacuum extractors. Fully galvanized construction, stainless steel cover. Vacuum port included. - Enables precise chamfering of expansion joint cuts. Equipped with a robust, professional-grade motor. Large depth adjustment range (up to 40 mm); adjustable handle angle. Front and rear guides enter the cut ensuring straight operation during chamfering, allowing angle and width adjustment. Extensive handle tilt adjustment. Supplied with 180 mm cutter. - Net price: 4,800.00 PLN (EUR 1,143) Net Prices: - Expansion joint cleaning tool (without grinder) – 900.00 PLN (EUR 214) - Milling/Cleaning machine (dual function) for expansion joints – 3,250.00 PLN (EUR 774) - As above, galvanized and powder coated – 3,400.00 PLN (EUR 810) - As above, with handle-mounted switch – 4,200.00 PLN (EUR 1,000) - As above, with additional powder coating – 4,350.00 PLN (EUR 1,036) Njdjwuvm Aspfx Ah Rscp - Concrete milling machine on 4 wheels (includes 125mm "V" cutter) – 4,100.00 PLN (EUR 976) - Milling machine on 4+2 wheels, for deep milling up to 30mm, includes 125mm "V" cutter – 4,200.00 PLN (EUR 1,000) - Milling machine on 4+2 wheels, for deep milling up to 40mm (includes 180mm "V" cutter) – 4,800.00 PLN (EUR 1,143) - Spare 125mm "V" cutter – 290.00 PLN (EUR 69) - Spare 180mm "V" cutter – 540.00 PLN (EUR 129) - 200mm cutter – 440.00 PLN (EUR 105) - Expansion joint cord installer, 8-10mm – 370.00 PLN (EUR 88) - Expansion joint cord installer, 10mm-12mm – 390.00 PLN (EUR 93) - Expansion joint cord installer, >12mm – 420.00 PLN (EUR 100) - Side cord installer (for wall work) – 390.00 PLN (EUR 93) All items available from stock. Manufacturers of concrete milling machines for 125 and 180 mm cutters, specialized for chamfering expansion joint cuts, widening cracks in damaged concrete floors, and cutting channels in concrete flooring (suitable for underfloor heating installation). We operate 7/24. Shipping available on a cash-on-delivery or prepayment basis, or collection in Poznań. Please contact us by email.

Year of construction: 2019, condition: good (used), Cedima WS 296 wall saw, built in 2019, in fully functional condition. Max. cutting length: 430 mm Blade bore: 60 mm Motor type: High-frequency electric motor Drive motor: 11 kW Nedpfjwic Hljx Ah Rjcp Feed/lowering: Electric Guide rail: 210 cm Accessories as shown. The saw blades can be purchased as an optional package. Six saw blades are included, each 80 cm long. The others have blades ranging from 90 to 120 cm. #8269

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 20 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Special features: Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond Nedpfx Aour N Dteh Recp wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 15 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Ncsdour N Aiepfx Ah Rep Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Special features: Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: new, functionality: fully functional, Year of construction: 2025, Technical data Drive type: Gasoline Output power: 3.7 kW Max. Cutting depth: 125 mm Max. Cutting disk diameter: 350 mm Motor Nedpfx Astt Ad Toh Recp Output power: 3.7 kW Max. recommended speed: 9300 rpm Speed at max. power: 9000 rpm Cylinder: 1 Number of strokes: 2-stroke engine Exhaust emissions (CO2 EU V): 711 g/kWh Drive type: Petrol Cutting equipment Max. Cutting depth: 125 mm Max. Cutting wheel diameter: 350 mm Mounting diameter: 25.4/20 mm Max. Cutting wheel thickness: 5 mm Max. speed: 90 m/s Coolant: Wet

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Nsdpoq Nx Aljfx Ah Rocp Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter Ncodpfjhzzb Rox Ah Rop -Manufacturer: Cedima, joint cutter type CF 16.1D -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW -Dimensions: 1150/680/H920 mm -Weight: 250 kg

Condition: good (used), Steel wire sheet cutter Cutting length 3900 mm Dimensions Length: 5100 mm Ncjdpfsgiplvjx Ah Rep Width: 1700 mm Height:3100 mm

Condition: good (used), Floor cutters, asphalt cutters, concrete cutters -without: saw blade and cable -Saw blade: Ø 360 mm Nedsdp Dvpjpfx Ah Rocp -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm -Weight: 100 kg Nsdsdp Dvtspfx Ah Recp

Condition: excellent (used), Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight -precise guidance of the cutting blades Ncsdeb A Rz Aepfx Ah Rop -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -max. for 6 cm stones -Weight: 10 kg

Condition: excellent (used), Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight - precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -Working length: 500 mm Nedjb A I Sfjpfx Ah Rocp -Weight: 100 kg

Year of construction: 1987, condition: used, Floor saw Ncjdpfxob A Hv Hs Ah Rep -Motor: Honda petrol engine -Power: 8.1 kW/11 PS -Saw blade diameter: 400 mm -Number: 3 pieces available -Price: per piece

Year of construction: 1980, condition: good (used), Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm Ncedpfob A Hv Dex Ah Rsp -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Year of construction: 1983, condition: used, machine/vehicle number: 1727, HM blade Ø: 300 mm here cutting depth max.: 100 mm Cutting blade speed: approx. 4000 rpm Ncjdpebpfpnsfx Ah Rop Drive motor: 380 V, 2.2 kW Space requirement: 350 x 600 x 400 mm Weight: approx. 30 kg with trolley underframe, for moving on a track rail