D&DR Group SRL

Condition: used, Year of construction: 2004, Overview Krones Lavatec KES bottle washer from 2004, rated at 11,000 bottles per hour. The machine cleans glass bottles in a juice and soft drink bottling line and is still installed and under power. Rcjdpfx Aie Agpqwereh Technical data - Manufacturer: Krones - Model: Lavatec KES - Year of manufacture: 2004 - Output: 11,000 bottles/h - Containers: glass bottles - Electrical supply: 380 V, 3 phases, 50 Hz, 70 A connected load Condition Used, still installed and under power. The line produces until shutdown on 20 November 2026. Inspection on site is possible. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, Year of construction: 2015, Overview Complete hot-fill glass bottle line for soft drinks and juices, built around a Krones Modulfill filler with Variojet rinser from 2015 and rated at 13,000 bottles per hour on 1 l and 22,000 bottles per hour on 0.25 l. The line runs non-returnable glass: depalletizing, rinsing, hot-fill filling, a White Cap twist-off capping machine behind the filler, hot-fill pasteurization, cooling, full bottle inspection, labelling on a Krones Prontomatic and a Langguth labeller, sleeving, tray and carton packing, incrating and palletizing, with buffer table. Two cappers are part of the line. Technical data - Products: soft drinks, juices - Containers: non-returnable glass bottles 0.25 l - 1 l - Line output: 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l - Years of manufacture: 1987 - 2016 Scope of Delivery Type | Manufacturer | Model | Description | Year - Glass depalletizer | Legendre | 16,000 bottles/h | 1999 - Rinser | Krones | VARIOJET | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Filler | Krones | MODULFILL | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Twist-off capping machine | White Cap | arranged behind the filler - Bottle inverter | Polyketting | 12,000 bottles/h | 2004 - Hot-fill pasteurizer | APV | 15,000 l/h | 2005 - Bottle cooler | SEN | 1987 - Full bottle inspector | Heuft | SPECTRUM TX | 22,000 bottles/h - Labeller | Krones | PRONTOMATIC | 15,000 bottles/h | 2006 - Labeller | Langguth | 13,200 bottles/h | 2004 - Sleever | Sleeve Technology | 16,000 bottles/h | 2016 - Buffer table | Krones | 2006 - Tray packer | SMI | 16,000 bottles/h | 1996 - Incrater | Stork | 16,000 bottles/h | 1996 - Carton erector | Kettner | KAF | 12,000 bottles/h | 1999 - Carton closer | Kettner | HDV | 12,000 bottles/h | 1999 Rcedpfxj Agpk As Airoh - Palletizer | Kettner | PRESSANT UNIVERSAL | 17,000 bottles/h | 1996 Condition Used, still installed. The line produces one last time from 1 to 20 November 2026. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, Year of construction: 2012, operating hours: 10,633 h, machine/vehicle number: LC699, Used Tetra Pak A3-compact flex 200 Slim 300V 9000bph- Year 2012Technical Specifications & Performance DataThis used bottling line is a Tetra Pak A3/Compact Flex aseptic carton packaging line configured for 200 ml slim carton formats. The line is designed for industrial packaging and beverage production applications requiring compact-format carton filling, straw application, secondary packaging, and coordinated line control.Main filler model: A3 CF 200SProduction capacity: 9000 bphCarton format: 0.2L slimElectrical supply indicated: 300VLine running hours: 10633Machine height: 4300 mmRequired footprint: 20 m²Changeover: Quick changeover for packs with the same bottom configurationAdvanced Automation & Control SystemsThe configuration includes a Tetra Pak LC30 line controller to coordinate the connected packaging equipment. This central control element supports synchronized operation between the carton filler, straw applicator, cardboard packer, and associated handling equipment. The listed A3 CF, SA30, CBP32, LC30, and ACHX 10 configuration provides an integrated process arrangement for continuous carton packaging.Quick-change capability is specified for formats sharing the same bottom configuration, supporting efficient production transitions within the compatible 200 ml slim pack family.Production Line Integration CapabilitiesThis second hand Tetra Pak packaging line is arranged for aseptic carton processing and downstream secondary packaging. The line combines carton filling with straw application, automated control, and cardboard packing equipment for an integrated industrial packaging workflow.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3/Compact Flex A3 CF 200S2012Various EquipmentTetra Pak Straw Applicator 302012Case PackerTetra Pak Cardboard Packer 302021Various EquipmentTetra Pak LC302012Various EquipmentHarmsen International AGUX10-0500-44m2012The line can be considered for beverage production and other liquid-product applications where aseptic carton technology and 0.2L slim packaging are required. Integration planning should include product preparation, utility connections, downstream case handling, and transport arrangements... Rsdpo Agpkmsfx Airjch

Condition: excellent (used), HORIZONTAL TANKS: 10 units of 40,000 liters each. 7 units of 50,000 liters each. Rjdpfj Agn Syex Airech

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, KTM - TROXLER single-block capping and screw-cap dispensing unit Rsdpe Agn Ikefx Airech screw-cap format 28x18 (adjustable) dispensing with chute channel vibrating bowl (capacity approximately 500 capsules) 1 capping head in-line insertion machine (without motor)

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, warranty duration: 6 months, FIMER MONOBLOCK FILLING AND BOTTLING MACHINE with 9 filling spouts and 1 corking turret Rcjdj Agn Ewopfx Aireh Approximate output: 1500 bottles/hour 2 units available (75 cl Alsace Ø 76 and 100 cl Alsace Ø 89) Machine fully overhauled, 6-month warranty (excluding electrical parts).

Condition: used, Year of construction: 1996, functionality: fully functional, type of input current: three-phase, warranty duration: 6 months, FIMER COMBINATION FILLING AND CLOSING MACHINE with 9 filling nozzles and 1 corking turret Rjdpfx Ao Agn Dnjirech Approximate output: 1500 bottles/hour Year: 1996 Cram safety guards 4 units available (dimensions to be verified) Machine has been completely overhauled and comes with a 6-month warranty (excluding electrical parts).

Condition: used, Year of construction: 1993, Overview Rcsds Agac Repfx Aireh This Klinger Serpende bottle washer was built in 1993 for cleaning returnable glass bottles in caustic baths. Its nominal output is 7,000 bottles per hour on 2 L bottles, adjustable between 4,000 and 8,000 bottles per hour. The machine works with plastic bottle carriers, 16 bottles per row, and takes bottles up to 95 mm in diameter. Construction is stainless steel, controlled by a Siemens SIMATIC S5 PLC with an operator panel at the machine. Suitable for water and soft drink lines running returnable glass. Technical data - Manufacturer: Klinger - Model: Serpende - Year of manufacture: 1993 - Machine type: bottle washer for returnable glass bottles, caustic bath cleaning - Nominal output: 7,000 bottles/h (2 L bottles) - Control range: 4,000 - 8,000 bottles/h - Bottle diameter: max. 95 mm - Bottle carriers: plastic, 16 bottles per row - Carrier rows: 117 in total, 100 loaded (1,600 bottle pockets) - Cycle time: 8.2 s - Total treatment time: 16 min - Pre-soak: 3.0 min holding time, 2.6 min treatment time - Caustic bath: 7.1 min holding time, 5.0 min treatment time - Cooling: 3.0 min holding time, 2.1 min treatment time - Material: stainless steel - Dimensions: approx. L 9,000 x W 3,300 x H 3,050 mm - Weight: approx. 19,000 kg Equipment - Plastic bottle carriers for bottles up to 95 mm diameter - Siemens SIMATIC S5 control in a separate control cabinet - Operator panel with keypad and emergency stop - Bottle infeed and discharge Condition Used. The machine is already dismantled and in storage. Availability Immediately. Location: Italy. Preparation and loading by the seller, EXW loaded.

Condition: used, Year of construction: 2003, Overview This Krones Sander Hansen tunnel pasteurizer was built in 2003 for the pasteurization of beer in glass bottles. It is a double-deck machine with a nominal capacity of 40,000 bottles per hour on 0.5 l bottles. Its 12 treatment zones - 4 regenerative zone pairs and 4 pasteurizing zones - cover a treatment area of 241.6 m². At the design point it delivers 25.3 PU at 60 °C, with a total treatment time of 54.2 min (17.2 min heating, 19.9 min pasteurizing, 17.2 min cooling) from an inlet temperature of 12 °C to an outlet temperature of approx. 35 °C. Technical data - Manufacturer: Krones (Sander Hansen) - Year of manufacture: 2003 - Machine type: double-deck tunnel pasteurizer - Capacity: 40,000 bottles/hour (0.5 l glass bottles) - Treatment area: 241.6 m² - Decks: 2, main conveyors: 2 - Zones: 12 in total (4 regenerative zone pairs, 4 pasteurizing zones) - Max. spray temperature: 64.5 °C - Water content: 38.9 m³ in total (20.6 m³ in the zones, 18.3 m³ in the buffer tanks) - Steam: 2,270 kW design flow, approx. 1,100 kW in balanced operation - Main water: 77.8 m³/h design flow, approx. 1.0 m³/h in balanced operation - Compressed air: 5 m³/h - Electrical: 215 A rated current, 141.3 kVA, 113 kW, cos phi 0.80 - Overall length without operator platforms: approx. 24,752 mm - Width: approx. 5,580 mm (7,680 mm incl. pumps and operating area) - Pump side: right, seen from the infeed - Empty weight: approx. 74,000 kg (163,200 kg with product and water) - Largest section for transport: 12,000 x 1,100 x 2,250 mm - Transport: approx. 12 x 40 ft containers or trucks Equipment - Stainless steel housing with external circulation pumps and piping - Buffer tanks for regenerative water management - Local push-button control stations with emergency stops along the machine - Electrical cabinets and field terminal boxes - Operator platform with stairs Scope of supply Rodpfx Ae Af Tkhoirjch The associated conveyor systems are not included. The scope of the conveyor system can be seen in the photos. Condition Used, still installed. The machine can be visited. Dismantling and loading can be carried out by the seller. Availability From 28 October 2026. Location: Poland.

Condition: used, Year of construction: 2010, Overview Sidel SBO 10/10 Universal rotary stretch blow moulder with 10 cavities, built in 2010, for PET bottles. The machine is still installed and can be visited by appointment. It is offered together with its preform feeding system and a Sidel-Alsim air conveyor. Technical data - Manufacturer: Sidel - Model: SBO 10/10 Universal - Year of manufacture: 2010 - Number of cavities: 10 - Neck finish: 28 mm PCO 1881 - Products: PET bottles Scope of Delivery - Stretch blow moulder | Sidel | SBO 10/10 Universal | 10 cavities, operator panel | 2010 - Preform feeding system | Sidel | Preform hopper, elevator and roller unscrambler | 2010 - Air conveyor | Sidel-Alsim | Bottle air conveyor at the outfeed | 1999 Rjdpo Af S E Isfx Airsch Condition Still installed. Inspection on site is possible by appointment. Availability Available immediately.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total width: 1,800 mm, overall weight: 2,500 kg, AMOS Fruit Belt Press / Juice Belt Press – 1,600 mm Belt Width – Stainless Steel – Year of Construction 2010 For sale is a used industrial fruit belt press from the manufacturer AMOS, designed for efficient juice extraction. The system features a generous press belt width of 1,600 mm and is suitable for industrial use in fruit juice production as well as fruit processing. The continuous operation of the belt press enables the economical processing of large quantities of fruit pulp. Technical Data Manufacturer: AMOS Machine Type: Fruit Belt Press / Juice Belt Press Model: presumably OPUS 1600 -OPUS30 Year of Construction: 2010 Press Belt Width: 1,600 mm Processing Capacity: approximately up to 5,000 kg/h (product-dependent) Material: predominantly stainless steel Operating Mode: continuous Drives: electric geared motors Equipment: press belts, roller system, pneumatic components, and drive units Rods Af I Awopfx Airoch Application Areas The belt press is particularly suitable for processing apples, pears, and other suitable fruit pulps. Condition The machine can be inspected by prior arrangement. A functional test and further technical details can be clarified upon request.

Condition: used, Year of construction: 2001, Overview This SMI LSK 30T is a shrink wrapping machine for PET bottle packs, built in 2001 by SMI (Italy) and fully overhauled in 2023. It groups two packs into one bundle, wraps the bundle in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30 packs per minute. It currently bundles 0.33 l and 0.50 l PET multipacks into 6 x 4 bundles. The machine runs film only (printed and oriented film); it is also equipped for trays, a mode that has never been used. It is in production only 3 to 4 days per month, so its working hours are low. Technical data - Manufacturer: SMI (Italy) - Model: LSK 30T - Year of manufacture: 2001, overhauled 2023 - Machine type: shrink wrapping machine for grouping packs, with integrated shrink tunnel - Output: up to 30 packs per minute - Current formats: two 0.33 l or 0.50 l PET packs grouped into one 6 x 4 bundle - Wrapping: film only, printed and oriented film; prepared for trays (never used) - Control: SMI POSYC touchscreen HMI, COSMOS servo drives, fibre-optic machine bus, CE control panel Rjdpo Afut Rofx Airoch - Gearboxes: Bonfiglioli - Location: France Equipment - Two-lane infeed conveyor, each lane carrying 3 x 2 packs - Pack grouping station (2 packs into 1) - Film wrapping unit with film reel unwinder and double reel holder (manual change) - Integrated heating and shrink tunnel with chain conveyor - One controller for the whole machine, including conveyors and film table; only the infeed guides are adjusted to the bottle diameter - Format parts and spare parts, including a new original SMI POSYC 3000 HMI (2026, not yet installed) and further new original SMI parts - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Condition The machine is in good condition. It was fully overhauled in 2023 with original SMI replacement parts and is still installed and in production. It can be inspected in operation by appointment. Professional dismantling is included. Availability The machine stays in production until December 2026 and is available for loading from the end of December 2026. It is located in France.

Condition: used, Year of construction: 2013, Overview This PE Labellers Rollmatic is a rotary roll-fed hot glue labeller for wrap-around OPP labels from the reel, built in 2013 by P.E. Labellers (Porto Mantovano, Italy). It ran in a bottled water plant at a nominal output of 30,000 bottles per hour and is supplied with the format parts for three bottle sizes: 0.5 L round, 1.5 L round and 2.0 L square. Technical data - Manufacturer: P.E. Labellers (Italy) - Model: Rollmatic - Year of manufacture: 2013 - Machine type: rotary roll-fed hot glue labeller for OPP wrap-around labels - Output: up to 30,000 bottles/h (nominal) - Bottle plates: 18 - Formats: 0.5 L round bottle, 1.5 L round bottle, 2.0 L square bottle - Direction of operation: right to left (counterclockwise) Rjdpfxj Afutwj Airsch - Electrical supply: 400 V, 50 Hz, 3-phase - Installed power: 16 kW, 20 A Equipment - Roll-fed labelling station with hot glue unit and label reel holder - Format parts for the 0.5 L round, 1.5 L round and 2.0 L square bottles - Electrical control cabinet and operator touch panel - Full guarding with safety doors Condition Still installed and under power, in working condition. Inspection is possible by arrangement. Availability Available from the first week of November 2026. Location: Italy.

Condition: used, Year of construction: 2000, Overview GAI 5003A rinser-filler-corker monoblock built in 2000 for still wine in glass bottles. Rinser, gravity filler and corker are mounted on one frame inside a full guarding enclosure, rated at 5,000 bottles per hour for Burgundy and Bordeaux bottles. The sale includes an Etiquetadoras Jornet PR0504 self-adhesive labeller (2008) with three labelling stations. Technical data - Manufacturer: GAI - Model: 5003A - Year of manufacture: 2000 - Output: 5,000 bottles/h; speed range 1,200 - 6,000 bottles/h depending on format; max. 3,750 L/h - Rinser: 20 grippers - Filler: 20 gravity filling valves, vacuum pump on board - Corker: 4-head turret for cork stoppers, with its own vacuum pump - Bottles: Burgundy and Bordeaux; diameter 60 - 115 mm, height 200 - 400 mm - Power supply: 380 V, 50 Hz, 3 phases + N, 24 V control voltage - Installed power: 7.15 kW, 17 A, IP55 - Dimensions: approx. 4,050 x 1,690 x 2,270 - 2,550 mm (L x W x H) - Conveyor height: 970 - 1,100 mm - Weight: approx. 5,900 kg - CE marked, CE declaration of conformity available Scope of Delivery Rcedpfxj Afltnj Airoh - Rinser-filler-corker monoblock | GAI | 5003A | 20 grippers, 20 filling valves, 4 corking heads | 2000 - Self-adhesive labeller | Etiquetadoras Jornet | PR0504 | 3 stations (front, back, strip label), thermal printer | 2008 Equipment - GAI control cabinet with operator keypad and display, emergency stop - Electronic speed adjustment from the control panel - Cork hopper feeding the corking turret - Infeed screw and star wheels - Filter units and pressure regulators with gauges - Operating and maintenance manuals for both machines Condition Used machines, installed in a winery. Inspection on site is possible on request. Availability Available from end of January 2027. Location: Spain.

Condition: used, Year of construction: 2020, Overview Compact bottling line for craft beer, built in 2020 by CDA (Chabot Delrieu Associés, France). The B-HOP monobloc labels, fills and caps glass bottles in one stainless-steel frame, fed by a rotary infeed table and discharging onto an outfeed table. Delivered with format parts for 75 cl bottles and additional tooling for 33 cl long-neck bottles; both formats are capped with 26 mm crown caps. Output up to 700 bottles/h. The line has been dismantled and is stored ready for transport. Technical data - Year of manufacture: 2020 - Output: up to 700 bottles/h - Product: beer - Containers: glass bottles, 75 cl and 33 cl long neck - Functions: labelling, filling, capping - Capping: crown cap 26 mm, for both the 75 cl and the 33 cl format - Electrical supply: 220 V / 16 A, 2 kW - Compressed air: max. 28 m³/h at constant 6 bar, compressor tank 200 L - Product inlet: DN40 Macon male connection at the pump inlet - Footprint: approx. 4,118 x 2,427 mm, plus door and cabinet clearance (approx. 3,254 mm deep) - Height: approx. 2,450 mm; conveyor height approx. 925 mm - Control: touchscreen HMI Scope of Delivery - Labelling, filling and capping monobloc | CDA | B-HOP | 2020 - Rotary infeed table | CDA | diameter 1,000 mm, standalone | 2020 - Outfeed table | CDA | 2020 - Format parts for 75 cl bottles - Additional tooling for 33 cl long-neck bottles, including fixed-plate roller Condition Reds Afkq Espfx Airjch Dismantled and stored. Inspection by appointment. Availability Available immediately. Location: France.

Condition: used, Year of construction: 2004, Overview Isobarometric filler built in 2004 by the Italian manufacturer CIMEC, with 8 filling valves. The machine filled carbonated lemonade into glass bottles: 1,300 bottles/h in 33 cl and 750 bottles/h in 75 cl. Last production in 2022. The filler has been dismantled and is stored ready for shipment. Technical data - Year of manufacture: 2004 - Filling system: isobarometric (counter-pressure), 8 filling valves - Output: 1,300 bottles/h (33 cl), 750 bottles/h (75 cl) - Product: carbonated soft drinks (lemonade) - Containers: glass bottles, 330 ml and 750 ml - Electrical supply: 400 V / 50 Hz, 3 kW - Compressed air: 6 to 7 bar, max. 120 Nl/min - Dimensions: approx. 1,600 x 1,400 x 2,400 mm (L x W x H) - Control: push-button panel with text display Equipment - Stainless-steel frame with transparent safety guarding - Electrical cabinet - Enerfluid side-channel blower - Pall filter housings - Conveyor section Condition Dismantled and stored, ready for shipment. Inspection by appointment. Availability Rcjdpfxj Afd Htj Airoh Available immediately. Location: France.

Condition: used, Year of construction: 2013, Overview This Cermex F38741, built in 2013, is an automatic cardboard case erector that forms shipping cases from flat blanks for an end-of-line packaging setup. Blanks are taken from the magazine, erected, the bottom flaps are folded and closed, and the open case is discharged on the outfeed rails to the downstream packer. The machine comes from a wine packaging operation and has been dismantled and stored. Technical data - Manufacturer: Cermex - Model: F38741 - Year of manufacture: 2013 - Machine type: automatic cardboard case erector - Output: up to 40 cases per minute - Power supply: 400 V, 50 Hz, 3P+N+PE, 23 A full load - Control: Siemens SIMATIC S7-200 PLC (CPU 224) Equipment - Blank magazine with infeed chain and lugs - Erecting station with pick-up head on a cable-chain carriage - Bottom flap folding and closing section - Outfeed rails for the erected cases Rjdpe Afdr Nefx Airech - Enclosure with transparent safety doors and signal tower - Separate control cabinet with Siemens operator panel, emergency stop and control transformer - CE marked Condition Dismantled and stored. An inspection is possible. Availability Available immediately. Location: France.

Condition: excellent (used), Year of construction: 1996, The machine was located at a school and was never put into production. Redo Afb D Aopfx Airjch It is also suitable for being disassembled for parts.

Condition: used, Year of construction: 2002, machine/vehicle number: LC698, Used AVE monoblock 1-75-24 filling line 30000 BPH - Year 2002Technical Specifications & Performance DataThis used bottling line is designed for high-speed handling, filling, capping, inspection and secondary packaging of PET and glass bottles. The declared maximum line speed is 500 bpm, while individual equipment is rated up to 900 bpm in bottle handling sections and 800 bpm through the filling, capping and inspection stages.Declared maximum line speed: 500 bpmContainer handling: PET and glass bottlesFormats: Mignon 50ml Filling monoblock: AVE Monoblock 1/75/24 with 75 valves, rated at 800 bpmPrimary capping equipment includes Zalkin and Fowler cappersSecondary packaging includes shrink wrapping, bundle labeling, case forming, glue application, checkweighing and case turningMachine years represented in the line range from 1984 to 2020Advanced Automation & Control SystemsThe line combines dedicated bottle handling, cap handling, filling, closure inspection and reject systems to support controlled beverage production. Inspection equipment includes a Heuft Basic BA-R20 unit for bottle-cap and low/high fill-level inspection, followed by a Heuft pusher rejection unit.Available electrical data includes a Lanfranchi bottle unscrambler rated at 400 V, 60 Hz and 4 kW. The Tekkra shrink wrapper is rated at 480 V, 60 Hz, 102 A and 3-phase power. The Pearson case former is rated at 460 V, 60 Hz, 3-phase power, 3 KVA and 15 A. The Thermo Scientific Versa checkweigher operates on 120 VAC, 50/60 Hz, single-phase power.Production Line Integration CapabilitiesThe complete bottling line is arranged for bottle preparation, filling, capping, inspection and downstream industrial packaging. Bottle unscrambling, dumping and merging equipment supports PET and glass bottle flow, while cap elevators, cap conveyors and cap sorters provide closure handling upstream of the capping stations.Machine typeManufacturer / modelYearVarious EquipmentDumpers Unlimited Bottle Unloader2017Various EquipmentLanfranchi .24.58 Bottle Unscrambler2003Various EquipmentHartness Bottle Dumper2004Various EquipmentLanfranchi Merger2018Various EquipmentPerrier MFL. 60 / MFG 60 Cleaner1984Filling MonoblockAVE Monoblock 1/75/24 Rcedpfx As Ad Rixsirsh

Condition: used, Year of construction: 2018, operating hours: 8,000 h, machine/vehicle number: LC641, Used GEA Procomac Aseptic filling line 48000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-performance aseptic PET solution engineered by GEA Procomac for industrial packaging and beverage production. Designed for second hand acquisition without sacrificing technical integrity, the line delivers a rated capacity of 48,000 BPH with dry aseptic technology and integrated fruit-piece dosing capability.Rated capacity: 48,000 BPHAseptic method: Dry asepticContainer format: 0.23L (two different molds)Bottle neck & cap: 38mm neck, double-layer 38mm capBlower: SIPA, 24 cavitiesFiller: GEA Procomac Fillstar FX isobaric filler, 84 valvesFruit-piece dosing: 24 valvesCapper: 24 nozzlesGas unit: None (suitable for low-acid and neutral products)Operating hours: 8000Year of manufacture: 2018Downstream speeds: Dual 24,000 BPH modules on key packaging operationsKey models/codes: Fillstar FX; outer-cap machine model NYG18H-00Advanced Automation & Control SystemsThe line integrates advanced aseptic handling and in-line quality control. Preform sterilization, cap feeding and sterilization, and H2O2 injection are automated to maintain hygienic integrity. Optical and X-ray inspection systems monitor critical control points with reject mechanisms for non-conforming containers. A dedicated aseptic water and CIP unit supports repeatable sanitation cycles and short changeover times. Automated components are engineered for consistent performance in high-speed production environments.Production Line Integration CapabilitiesConfigured as a complete production line for PET bottles, the system combines container handling, filling, labeling, secondary packaging, and palletizing. It includes a 24-cavity SIPA blower, GEA Procomac isobaric filler, fruit-piece dosing, sleeve and neck labeling, shrink wrapping, carton packing with industrial robots, accumulation buffering, and palletizing. Format flexibility includes 0.23L with two mold sets and 38mm neck finish. The modular layout supports synchronization across conveyors and buffering for continuous operation.Machine Condition & Maintenance HistoryThe line is still on power and reported in very good condition. Operating hours are approximately 8000. Manuals are available to support installation, operation, and maintenance. The equipment set is recent (predominantly 2018), with select processing assets from 2007 and 2019 included, indicating a professionally maintained and upgraded system.Operational Performance & VersatilityOptimized for low-acid and neutral product aseptic bottling, the configuration is suitable for premium beverage production requiring sterile conditions and gentle handling—especially products containing fruit pieces. Processing assets include tubular pasteurizers, UHT capability, homogenization, deaeration, and aseptic tanks, supporting robust beverage preparation workflows. Dual 24,000 BPH downstream modules help ba... Rcjdpfx Ao Ady Dxjireh

Condition: used, Year of construction: 2012, machine/vehicle number: LC678, Used OLMOS compact eco2 linear capper labeller - glass and PET Technical Specifications & Performance DataOlmos COMPACT 800 2 is an in-line labeling and capping machine designed for bottle handling in industrial packaging and beverage production environments. Its double-position inlet configuration supports continuous integration within a bottling line, combining labeling and capping operations in one machine.Manufacturer: OlmosModel: COMPACT 800 2Manufacturing year: 2012Bottle formats: compatible with 0.5L to 5.0L bottlesContainer materials: PET and GlassFunctions: in-line labeling and cappingMains voltage: 380V ACAdvanced Automation & Control SystemsThe machine is configured for in-line operation, allowing the labeling and capping stages to be incorporated into a coordinated bottle-handling process. The double-position inlet is intended to support controlled bottle entry and reliable transfer through the operating stations. Electrical supply is specified as 380V AC.Production Line Integration CapabilitiesThis used bottling line component is suitable for integration with upstream filling, rinsing or bottle conveying equipment and downstream inspection, secondary packaging or palletizing systems. The machine handles PET and Glass bottles from 0.5L to 5.0L, providing format flexibility for beverage production and other bottled products. Its combined labeling and capping arrangement can help simplify line layout by bringing two key packaging operations together in one in-line unit.Machine type/categoryManufacturer/modelYearLabeling MachineOlmos COMPACT 800 22012Capping MachineOlmos COMPACT 800 22012Machine Condition & Maintenance HistoryThe machine is described as being in perfect working condition. This operational condition makes it relevant for second hand bottling equipment projects where a combined labeling and capping solution is required for PET or Glass bottle formats.Operational Performance & VersatilityThe COMPACT 800 2 combines labeling and capping in line for bottles ranging from small 0.5L formats through to 5.0L containers. This versatility supports production lines that require different bottle capacities while maintaining an integrated industrial packaging flow. PET and Glass compatibility makes the machine applicable to a range of beverage production layouts.Installation Requirements & Site PreparationInstallation should provide an in-line conveyor interface matched to the bottle formats, container material and production flow of the existing packaging machinery. The electrical connection must be prepared... Rcjdpfx Aie Ady Dfereh

Condition: used, machine/vehicle number: LC547, Used Bottling Line for still wine 2000 bph The Used Bottling Line for still wine 2000 bph processes still wine in glass bottles and handles formats of 0.375 L, 0.75 L, and 1.5 L. The line delivers a performance of 2000 bottles per hour and operates entirely in a clockwise direction. Each machine is designed to ensure precision, compatibility, and reliability when handling still wine in glass containers. Moreover, the configuration supports a continuous and linear bottling process with minimal manual intervention. Microfiltration and feeding unit The process begins with a mono screw pump equipped with a microfiltration system, manufactured in 1999. This pump directly feeds the filler and maintains consistent product flow. Specifically, the filtration unit includes three housings, each containing three filter cartridges, in addition to all required connectors. As a result, this module guarantees the microbiological safety of the wine before it enters the filling phase. Rinsing machine SBR 1R. 4. 12. 132 Rcjdpfx Aio Adyyaersh Next, the line passes through an SBR rinsing machine, model 1R. 4. 12. 132, also built in 1999. It features 12 grippers with fixed nozzles, and performs bottle rinsing using recirculated water. In particular, this unit supports Champagnotta (90 mm diameter), Borgognotta (80 mm diamater), and Bordolese (72 mm diameter) bottle diameters. Therefore, it ensures that every bottle reaches the filling station free of particulate and microbiological residue. Gravity filler Bertolaso Olimpia 12 After rinsing, the bottles move to a Bertolaso Olimpia 12 filler, a gravity-based unit with 12 filling nozzles built in 1999. This machine operates with slight vacuum assistance, ensuring gentle product handling. Notably, it accommodates multiple formats, including half bottle (63 mm diameter), Bordolese, Borgognotta, Champagnotta, and Magnum (110.5 mm diameter). Consequently, the machine offers flexibility in batch production. In short, the filler guarantees accurate volume control and clean filling cycles tailored for still wine. Capping units for crown and straight corks in the Used Bottling Line for still wine The Used Bottling Line for still wine 2000 bph features two separate capping modules. First, the Bertolaso Alfa 110 applies 29 mm crown caps using a single-head system. Operators can adjust the height manually, and the machine works without vacuum pre-treatment. For example, it seals Champagnotta and Magnum spumante bottles efficiently. Second, the Bertolaso S. Gloria 500 R/S handles 24 mm straight corks with gas injection and one capping head. Unlike the first unit, it does not use vacuum. Furthermore, it handles formats from 63 mm to 110.5 mm diameter, maintaining high sealing reliability. Altogether, these two capping stations allow the line to manage various closure types for still wine applications. Bottle washer and drying system in the Used Bottling Line for still wine

Condition: used, Year of construction: 2016, machine/vehicle number: LC528, Technical Specifications & Performance DataComplete 2016 glass beer line built around a GAI monoblock and Enos labeler, in ready for operation condition. Throughput up to 900 bottles/hour across 0.33 L, 0.50 L, 0.70 L formats with isobaric counter-pressure filling for carbonated beer. This unit is delivered as second-hand used beer bottling equipment with documented components and safety features.Manufacturer: GAI (filling monoblock), Enos (labeling)Production speed: up to 900 bottles/hourFilling technology: Isobaric counter-pressure, with double pre-evacuation system.Container types: Glass bottlesBottle formats: 0.33 L, 0.50 L, 0.70 LProduct types: Beer (configured for carbonated products)Line components: GAI rinsing–filling–capping monoblock with crown capper; Enos labeling systemCondition: READY FOR OPERATIONDocumentation: Manuals availableSafety: Guarding and interlocks consistent with modern linesManufacturerModelYearMachine typeNotesGAIMLE441-BIER-0032016Filling MonoblockConfigured for crown capEnosSIRIAM2016Labeling MachineAdvanced Automation & Control SystemsThe line employs centralized controls to streamline operation and changeovers. The GAI monoblock regulates isobaric parameters to limit oxygen pickup and foam, maintaining consistent fill levels on all listed formats. An operator-friendly HMI bottling station provides status, alarms, and access to format recipes where configured.Control interface: HMI with status indications and alarmsAutomation: PLC-based logic; recipe-led parameters when enabledProcess control: Counter-pressure setpoints tailored to beer carbonationSafety features: Interlocked guards, emergency stops, standard protectionsElectrical: Standard industrial power supply (to be confirmed during site survey)Production Line Integration CapabilitiesDesigned to interface with common upstream and downstream modules, this beer bottling machinery connects to depalletizers, conveyors, date coders, inspection, and case packing. The Enos SIRI... Rcodpfe Adywljx Airsh

Condition: used, Year of construction: 2013, machine/vehicle number: LC685, Used DC GF 3-in-1 filling line, sparking water 6000 BPH, Year 2013Technical Specifications & Performance DataThis used bottling line is configured for PET bottle production and beverage filling, combining a linear blow molding machine, high-pressure compressed-air equipment, an integrated rinsing, filling and capping monoblock, labeling, coding, saturation and shrink-wrapping equipment. The line is designed for industrial packaging of carbonated, oxygenated and non-carbonated beverages.Blow molding capacity: 1,000–2,000 bphFilling monoblock capacity: 4,000–6,000 bph at 0.33LSupported bottle formats: 0.33L, 0.5L and 1.5LContainer material: PET bottles with PCO neck finishComplete line footprint: approximately 11 m × 6 mBlow molder configuration: linear, 2 cavities, 20–50 g preformsFilling monoblock: 18 rinsing stations, 18 filling valves and 6 capping headsAdvanced Automation & Control SystemsThe line includes Mitsubishi PLC control for the filling and handling process. The filling monoblock uses an electronic filling system and operates with clockwise bottle movement. Safety functions are fitted on the blow molding machine, compressor and filling monoblock, while safety covers are included for the complete line.Electrical supply for the blow molder and compressor: 400 V, 15 kW, 50 HzElectrical supply for the filling monoblock: 400 V, 3.5 kW, 50 HzElectronic non-isobaric filling systemPCO 32 and PCO 28 cap compatibilityIntegrated HS-Datu dating unit for production codingProduction Line Integration CapabilitiesThis complete PET bottling line follows a practical process flow from bottle forming through filling, labeling and secondary packaging. The linear blower is supplied with a preform feeder, preform tipper, 30 bar three-stage compressor, cooling dryer and air filter. Downstream equipment includes a self-adhesive labeling machine, vacuum saturator, conveyor system and automatic shrink film wrapper.Machine typeManufacturer / modelYearBlow Molding MachineECENG MACHINERY Co. Ltd.2010CompressorChina2010Filling MonoblockDC GF 3-in-12013SaturatorVacuum saturatorLabeling MachineSelf-adhesive labelerShrink Wrap... Rodpfxj Adyt Ts Airsch

Condition: used, Year of construction: 2021, machine/vehicle number: LC604, Used Brewery for beer processing machine 5HLTechnical Specifications & Performance DataThis second hand 5 HL brewery brewhouse on skid is a compact, industrial-grade system engineered for small to medium-scale beverage production. Manufactured by BEOINOX, it integrates key process vessels and utilities for efficient wort production and fermentation management. The system is suitable for craft beer brewing and can be integrated with downstream packaging or a used bottling line.Batch capacity: 5 HL per brewBrewhouse vessels: Mash Tun 500 L, Lauter Tun 1000 L, Whirlpool 800 LUtility tanks: HLT 800 L, CLT 800 L, UnderbackFermentation: 2 × 1350 L fermentation vessels (FVs)CIP: Mobile CIP unit with 2 × 150 L tanksHeat exchanger: Two-stage plate heat exchanger (PHE)Pumps & pipeline: Process pumps and sanitary piping includedAeration: Aeration set includedControl: Integrated control systemModel/Code: .300.21-00Overall dimensions (approx.): Length 4503 mm, Width 2598 mm, Height 2200 mmAdvanced Automation & Control SystemsThe brewhouse is supplied with an integrated control system to manage key brewing steps such as mashing, lautering, wort transfer, and cooling. The two-stage PHE enables precise temperature control for wort chilling and process optimization. Pumping and pipeline circuits are designed for smooth transfers, while the aeration set supports consistent yeast pitching and fermentation starts. Safety interlocks and operator controls contribute to reliable daily operation within industrial brewing environments.Production Line Integration CapabilitiesThis skid-mounted brewhouse can operate as a standalone brewing unit or be integrated into a broader beverage production line. It interfaces seamlessly with fermentation, conditioning, and downstream packaging processes. The sanitary pipeline layout enables efficient transfer to FVs and onward to filtration or packaging. With its compact footprint, it can be paired with a used bottling line or kegging system to complete an end-to-end craft beer production setup.Machine Condition & Maintenance HistoryThe system is offered as a second hand unit in operational condition and ready for operation. Its sanitary, skid-mounted design simplifies cleaning and upkeep, while the included mobile CIP unit supports routine maintenance procedures for vessels, pipelines, and heat exchanger circuits.Operational Performance & VersatilityDesigned for beer production, the 5 HL brewhouse accommodates standard craft workflows including infusion mashing, lautering, wort boiling/whirlpooling, and rapid chilling. The two 1350 L fermentation vessels provide capacity for staggered batches and flexible production scheduling. The aeration set enhances yeast management and consistent fermentations, while the CIP system ensures hygienic operation and product quality.Installation Requirements & Site PreparationThe compact skid layout reduces installation complexity. Allow sufficient space for the indicated footpr... Rcsdpfx Ais Adt N Isrsh