JAB Automation

Condition: good (used), Year of construction: 2006, functionality: fully functional, Specifications (See Details above for installed options) *Assembleon Philips Topaz Rated CPH Optimal placement rate: 14,000 cph Simultaneous pick Nominal placement rate: 9,000 - 11,000 cph *Applicable Components: 0402 - SOP, SOJ, PLCC 25 mm (1.0") with Line Sensor Camera QFP 21 mm with pin pitch down to 0.65 mm (25 mil) Line sensor camera system QFP 32 mm (1.26") with pin pitch down to 0.5 mm (20 mil) Optional area CCD camera system *Max. component height: 6.5 mm *Philips Topaz Mounting accuracy: (x,y) 3s 0.08 mm for chips and SOIC Line sensor camera system 0.06 mm for QFPs Using Precision Head and optional Area CCD camera system *Mounting angle: 0 up to ± 180 (steps of 0.01) *Alignment system: Line sensor camera with front lighting system for Vision-on-the-Fly image processing by VICS 2500 proprietary vision system -Second Line sensor camera for rear side is optional -Area CCD camera for fine pitch components Optional -Area CCD camera for fiducial alignment Standard *Type of nozzles: Type 31 Type 31-1 (Precision Head only, spring loaded) Type 32-2 Type 33 Type 34 Type MELF -The nozzle types for Topaz and Emerald are the same. *Nozzle exchange station: 12 nozzle positions Optional (No nozzles included) *Number of heads: One single beam with 8 exchangeable nozzles Including one Precision Head *Placement heads actuation method: Pneumatic or servo controlled for component height compensation *Number of Tape Feeders: 8 mm: 100 positions 12 mm: 48 positions 16 mm: 48 positions 24 mm: 32 positions 32 mm: 32 positions 44 mm: 24 positions 56 mm: 18 positions Stick feeders: Depends on stick dimensions Bulk feeders: 100 x 8 mm positions General Specifications *Component Packaging: Tape according to IEC/EIA-J/JEDEC: 8-56 mm Tape reel diameter max: 380mm (15") *Manual Tray feeder: Max. tray size 320 mm x 320 mm (12.6" x 12.6") Optional: Manual tray feeder *Fixed Manual Tray Feeder: Max. tray size 635 mm x 136 mm (25" x 5.3") Optional: Fixed manual tray feeder (Max. board size 250 mm (10") -Optional 558 mm x 508 mm (22" x 20"). *PCB Thickness: Min. 0.6 mm (0.02") Max. 3.0 mm (0.12") *Non-mountable area: Ledpfx Aneznmfae Iorp -Board Top side: 3 mm from rear side board edge (0.12") 0 mm from front side board edge 3 mm around reference holes (0.12") (for locating pins) Component height restrictions apply in the 10 mm (0.4") area from front side edge depending on board thickness -Board bottom side: 5 mm from front and rear side board edge (0.2") For Ceramic boards (optional) the non-mountable area can be different *PCB Material: Phenolic/FR4/Composite Materials Ceramic boards require special conveyor sections (optional) *PCB Positioning: Locate pin fixation Adjustable Push up pins Adjustable Edge clamping Adjustable Sub stop (PCB waiting buffer) Adjustable *PCB Transport height: 900 mm ± 10 mm (35.4" ± 0.4") Standard SMEMA 953 mm ± 12.5 mm (37.5" ± 0.5") Standard *PCB Ratio width/length: Max. 1:3 *Philips Topaz Machine dimensions and weight: Length: 1655 mm (5.4 ft) Height: 1865 mm (6.1 ft) Width: 1358 mm (4.5 ft) Width including feeders 2194mm (7.2 ft) Weight: 1150 kg (2535 Lbs)

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Manufacturer: MANZ PLC control, touch screen display, Siemens Lrodpfx Aeznli Don Isp

Condition: excellent (used), The machine jack was rarely used and served as a backup. The last inspection by GKS was in November 2022. Lsdpfx Anezmdr Ie Isrp

Condition: used, Year of construction: 2019, Operational condition UV curing oven! Lrodjzl Sykopfx An Iep

Condition: used, Year of construction: 2019, Opertional unit! Ledpfx Aszlyx Uon Isrp

Condition: used, Year of construction: 2013, Max size 750 x 520 mm Component height up to 90 mm Operational unit. Ledpfx Anezlywqe Isrp

Condition: used, Quantity: 4 available Manufacturer: Cleco Ledpszlua Tofx An Ijrp Model: 18EPE06Q Product Type: Electric Precision Screwdriver Condition: Used Design: Pistol-grip Application: Industrial assembly Drive: Electric Use: Screwing operations with controlled torque Suitable for: Production workstations Industrial version: Yes

Condition: excellent (used), functionality: fully functional, Complete line hydraulic through-feed clamping system for furniture conveyor belts for automated handling shuttle 2 tilters Lrodjzk Tquspfx An Ijp

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Ledpfszi Upcsx An Ierp Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: used, Available: 2 units Manufacturer: Cleco Lredpfx Aezi Dxyjn Ijp Model: 18EAE08AL2 Product type: Electric torque screwdriver Condition: used Design: Angle screwdriver Application area: Industrial series assembly Drive: electric Use: Controlled screw assembly Suitable for: Production and assembly lines Industrial design: yes

Condition: used, Manufacturer: Cleco Model: 18EPE12Q Product type: Electric precision screwdriver Condition: used Lrsdpfezi Dwpjx An Iop Design: Pistol-grip Application area: Industrial assembly Drive: electric Use: Screwing operations with controlled torque Suitable for: Production workstations Industrial design: yes

Condition: used, Quantity: 4 available Manufacturer: Cleco Model: 18ESE12D3 Product type: Electric torque screwdriver Condition: used Design: Inline screwdriver Application: Industrial series assembly Drive: electric Use: Controlled screw fastening Suitable for: Production and assembly lines Lsdpfozhnzcjx An Isrp Industrial design: yes

Condition: used, Year of construction: 2012, First Article Inspection of PCB Assemblies. Lrsdszhlbyopfx An Ijp Total of 2 units available.

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-fit components. Intended use: The machine is used for press-fitting connecting elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the press-fitting process using a foot switch. The press-fitting process runs automatically. Connecting elements: Press-fit nut, rivet nut, self-piercing nut, press-fit pin, punching pin/rivet pin Thread size: M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Lsdjzgr I Rjpfx An Iorp Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (B): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The press-fitting of the connecting elements takes place in automatic mode. Movements are only initiated when the operator presses the foot pedal and thus triggers the press-fitting process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, “Functionally tested; item comes from the dismantling of equipment from an automotive supplier.” Available quantity: > 10 units Lrjdpfszggx Djx An Isp Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2–10 A DC Operating temperature: –20 to +70 °C Humidity: 0–90 % without condensation You can also find the corresponding screw control unit with us!

Condition: used, From the dismantling of a production facility belonging to an automotive supplier, professionally disassembled. Quantity available: > 10 units Brand: CLECO Lredpfxszggqaj An Iep Series: MPRO400GC Voltage: 230 V AC Frequency: 50/60 Hz Rated current: 2 A Power: Typically 250 VA Protection class: IP42

Condition: excellent (used), Year of construction: 2026, The ST-1900 universal semi-automatic pallet assembly table is a simple and cost-effective version of a semi-automatic production station, designed for companies that want to achieve a higher level of efficiency while maintaining low investment costs. Lredpfx Ajzgc Smon Ijp The table is equipped with a pneumatic pallet lifting system and pneumatic combs for positioning the horizontal boards, which significantly simplifies and speeds up the operator's work. By maintaining a simple and uncomplicated table design, manual effort is reduced and the ergonomics of the workstation are improved. Despite the use of pneumatics, the Pneumatico ST-1900 remains a device in the basic segment – it is an economical solution for small and medium-sized manufacturers who need to increase production repeatability and speed. The table allows for flexible work with popular pallet formats and is suitable for both the production of disposable pallets and standard pallet designs for less demanding customers.

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, The ST-1400 universal manual pallet dismantling table is the simplest and most affordable version of a pallet dismantling station, designed for start-up companies or small manufacturers who do not yet require automation. It is a fully manual workbench with manually extendable "combs" for supporting and positioning the horizontal boards. It allows working with pallets with a maximum length of 1400 mm and a working height of up to 1200 mm. Unlike more advanced systems, the Pneumatico ST-1400 does not have pneumatics or automatic clamping devices – all operations are performed manually, which significantly reduces the purchase and maintenance costs, but at the same time means a basic level of equipment, simpler than semi-automatic industrial tables. This solution is particularly well-suited for the production of disposable pallets and for less demanding customers, where low production costs and fast, uncomplicated production are key. It is an ideal choice for small workshops and small-batch production, where simplicity, flexibility, and low initial investment are important. Lrjdezgc R Aepfx An Iop

Condition: ready for operation (used), An Asco Rail assembly and disassembly stand for brake slack adjusters with a functional testing device is available. Operating pressure: 6bar, max. test force: 100kN, cylinder stroke: 300mm. Documentation available. An on-site inspection is possible. Lsdozf Nbrspfx An Isrp

Condition: used, Year of construction: 2004, Feeder slots in front 40pcs. Back side feeder slots 10pcs and tray solution up to 20 pcs of component trays. Feeders included: o 6 pcs 8mm tape feeders o 18 pcs 12mm tape feeders o 16 pcs 16mm tape feeders Lrjdezf H Snepfx An Isp o 7 pcs 24mm tape feeders o 3 pcs 32mm tape feeders o 4 pcs 44mm tape feeders o 1 pc 56mm tape feeders

Condition: used, Year of construction: 2006, Available in Q3 2026 NXT base 1: independent, control for second modul Head1: H12S Lredpfx Anjzf H N Te Isp Head2: H12S NXT base 2: dependent, works under modul 1 Head1: H12S Head2: H04 NXT base 3: independent Head1: H04 Head2: H01 Feeder slots on each NXT modul 45 pcs. Total slots 270pcs for 8mm - Feeders included: o 156 pcs 8mm tape feeders o 29 pcs 12mm tape feeders o 16 pcs 16mm tape feeders

Condition: used, Year of construction: 2019, Computerized Beveling Machine SS20, Skiving Machine, Leather edge and tip thinning machine Year of Construction: 2019 Condition: Ready for operation Functionality: Fully Functional Overall weight: 145kg Lodpfxezdgg De An Ijrp Kw: 1.2 Hz: 50/60

Condition: like new (used), Year of construction: 2018, The SEHO System 8140 PCS is a professional and extremely reliable industrial wave soldering machine. These systems are used in the electronics industry for soldering Through-Hole Technology (THT) printed circuit boards, including lead-free processes. Lrsdpfszdggkex An Iep The main features and specifications of the SEHO 8140 PCS on a carrier system type: Wave soldering system with continuous transport. Maximum soldering width: 400 mm. Fluxer: Equipped with an ATS spray fluxer or foam fluxer for extremely precise and economical dispensing. Preheat: Modular and powerful preheating zone (often expandable with IR, convection, and quartz) to gradually bring the printed circuit boards to temperature. Solder bath: Designed for both lead-containing and lead-free alloys (such as SAC305), often equipped with local nitrogen inerting to prevent oxidation. Control: Equipped with an industrial PC or microprocessor control (PCS - Process Control Software) that allows parameters such as transport and pump speed to be accurately stored and programmed.

Condition: excellent (used), 4 pcs 1st generation trolley 4 pcs 2nd generation trolley 132 pcs 1st generation 8mm feeders 12 pcs 1st generation 12 mm feeders Lrodpfjzdfzgjx An Isp 4 pcs 1st generation 16 mm feeders 1 pcs 1st generation 24 mm feeders 2 pcs 1st generation intelligent trolleys

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2006093100701, total length: 2,900 mm, Cool it is s/s refrigerated sliding door ,type CE-8,fabrication number 2006093100701 ,year of construction 2020,dimensions door:1300mmx2050 mm,length rail :2900 mm Lot Location :Schillerdtrabe2 ,49434 Vorden ,Germany Ledpfx Ajzcg Dyon Ijrp