Gemoss Sia

Condition: used, mileage: 28,000 km, power: 160 kW (217.54 HP), first registration: 05/2011, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,105 mm, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, Color: White, Leaf spring suspension, Digital tachograph, Low noise: CEE 92/97, Comfortable driver's seat, Pneumatic driver's seat, Passenger bench for 2 people, Radio, Electric windows, Heated exterior mirrors, Immobilizer, Rear differential lock, Anti-roll bar: Front, Sun visor, Spare wheel, Lifting roof (manual), Speed limiter: 90 km/h, EEV CALIBRATION, EEV CALIBRATION. Nedpfsz E Dmajx Ab Uswl

Condition: used, Year of construction: 2010, machine/vehicle number: ET179, Used Sacmi Labeling Machine Opera year 2010 overhauled in 2025 Model: Opera 400 (2010) • Speed: 45,000 Bottles/hour • Status: ready for operation • Formats: 500 ml, 1 L, 1.5 L. Reconditioned OPP roll-fed labeler, overhauled in 2025. This overhauled labeling machine delivers stable high-speed performance for multi-format lines and qualifies as robust bottle labeling equipment for continuous production. Performance and Specifications: The Opera 400 maintains consistent output at 45,000 BPH with quick format changes across 500 ml, 1 L, 1.5 L. Two labeling stations support continuous operation, with automatic label adjustments and manual head adjustment to keep tolerances steady at speed. This is a reconditioned OPP labeling machine. Work performed during the 2025 overhaul: The jacks The plates The glue roller were overhauled The roller motor was replaced New safety guards were installed The printheads were overhauled All glue heating unit probes were replaced The suction unit hoses were replaced, and the entire electrical system was inspected Components and Functionality: Nodpfsz E Dl Ajx Ab Ujwl Equipped with 25 plates, the Opera 400 uses a mechanical cam brake/clutch for plate movement to maintain precise synchronization at full speed. The label feed is roll-fed (coil). With 2 labeling stations, the machine supports continuous application while minimizing downtime. No. of plates25 Rotation direction0 Plate movement1 (mechanical cam brake/clutch) Number of stations2 Labeling method7 Label placement5 Optical centering system0 Head adjustment1 (manual) Optimization and Maintenance of Used Sacmi Labeling Machine: Manual head adjustment gives technicians direct control for fine-tuning, while automatic label adjustments reduce operator intervention during run. The 2025 refurbishment addressed wear parts and safety elements, supporting reliable uptime typical of bottle labeling equipment in high-throughput environments. Conclusion: Sacmi Opera 400 (2010), overhauled in 2025, combines 45,000 BPH throughput, roll-fed OPP application, 25 plates, and 2 stations with multi-format capability (500 ml, 1 L, 1.5 L). Ready for operation.

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Used bottle washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automation & Control SystemsThe 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs.Production Line Integration CapabilitiesThis rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats.Machine Condition & Maintenance HistoryThe machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility.Operational Performance & VersatilityThe hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of win... Nodpfx Aoz E Dlvjb Uowl

Condition: used, Year of construction: 2000, machine/vehicle number: M309, Used filling monoblock Bertolaso Syncronia 16-16/1-840Technical Specifications & Performance DataThe Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction.Manufacturer: BertolasoModel: Syncronia 16-16-1-840Year: 2000Container type: Glass bottlesRinser: 16 grippers with penetrating nozzle and double inert gas treatmentFiller type: Gravity/light depression with nitrogen supportCorker: Single-head straight corking with inert gas and vacuum corkingFormats: Compatible with 0.375L and 0.75L bottle formatsElectrical: 400 V, 50 HzCIP readiness: Integrated CIP with stainless steel dummy bottlesModel code & configuration: Syncronia 16-16-1-840Advanced Automation & Control SystemsThe monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production.Production Line Integration CapabilitiesDesigned for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts.Machine Condition & Maintenance HistoryThe machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability.Operational Performance & VersatilityThis monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks. Additional safeguards include outfeed sensors for bottle position control and level r... Nwsdpjz E Dlpofx Ab Uol

Condition: used, Year of construction: 2006, machine/vehicle number: ET236, Used SACMI OPERA labeller machine 200 RFTechnical Specifications & Performance DataThis rotary labeling machine is engineered for high-speed wrap-around labeling with hot-melt technology. Manufactured by Sacmi, the Opera 200 RF delivers robust performance for beverage production and industrial packaging applications, supporting second hand and used bottling line upgrades with reliable throughput.Model: Opera 200 RFMachine type: Rotary Labeling MachineProduction speed (max): up to 30,000 containers/hourCurrent bottle format: 1.0LContainer material: PETLabel type: OPP (oriented polypropylene), roll-fedApplication method: Hot glueReels: 2 with automatic reel changeMaximum reel diameter: 350 mmNumber of label magazines: 2Plate rotation: Cam-drivenWorktable height: 1200 mmElectrical supply: 400 V, 3 Ph + TInstalled power: 25 kWYear of manufacture: 2006Advanced Automation & Control SystemsEquipped with a Pro Face HMI, the Sacmi Opera 200 RF provides intuitive operator control, recipe management, and production monitoring. Mechanical cam-driven bottle plates ensure precise and repeatable label application at high speed. Automatic reel change allows uninterrupted operation during reel depletion, reducing downtime and maintaining production efficiency on a used bottling line.Pro Face operator interface (HMI) for clear diagnostics and settingsMechanical cam control for accurate bottle rotation and label alignmentAutomatic roll changeover to sustain continuous labelingClockwise carousel rotation for standard line layoutsIntegrated safeguards and interlocks for operator protectionProduction Line Integration CapabilitiesThis machine integrates seamlessly into beverage production environments as a standalone unit or inline with rinsing, filling, and capping machines. Designed for PET bottle handling, it interfaces with upstream and downstream conveyors and can be adapted to additional bottle sizes with appropriate format parts.Inline or standalone operation within packaging machinery layoutsDesigned for PET bottle handling in industrial packaging linesCurrent format 1.0L; adaptable to other formats via change partsOptimized for wrap-around OPP labels with hot-melt applicationMachine Condition & Maintenance HistoryThe unit is second hand, overhauled, and guaranteed. It is ready for operation with compatible spare parts available, providing confidence for rapid deployment into production.Ready for immediate useOverhauled and guaranteedWarranty: 6 monthsSupplied with compatible spare partsOperational Performance & VersatilityThe Sacmi Opera 200 RF is built for consistent, high-quality wrap-around label applica... Nwsdpfx Abez E Dlie Uel

Condition: used, Year of construction: 2012, machine/vehicle number: PST30, Used Tetra therm aseptic pasteurizer - 2012Technical Specifications & Performance DataThis aseptic pasteurizer delivers reliable high-temperature short-time processing for demanding beverage production. Engineered within the Tetra Therm family and manufactured in collaboration with Alfa Laval, it is configured for aseptic operation with integrated deaeration for quality preservation in sensitive products. As a second hand unit from industrial packaging environments, it offers strong performance for a used bottling line or a standalone processing cell.Machine type: Aseptic Pasteurizer (Flash)Brand: Tetra Pak (engineered with Alfa Laval)Model: CM6-SMYear: 2012Production capacity: up to 12,000 L/h (current setting approx. 6,000 L/h)Maximum process temperature (TS): 125 °CMaximum allowable pressure (PS): 6.0 barTest pressure (PT): 8.6 barProcess volume: 162.0 LFluid group: 2Deaerator: IncludedCE conformity: CE 0409Test pressure date: 2012-11-28Advanced Automation & Control SystemsDesigned for modern beverage production, this aseptic pasteurizer supports automated temperature control and stable holding conditions suited to HTST workflows. It is compatible with typical PLC/HMI architectures used in bottling equipment and packaging machinery, enabling recipe management, alarm handling, and trending through standard plant control systems. Safety interlocks and CE-compliant protections contribute to consistent operation and operator safety during process and cleaning phases.Production Line Integration CapabilitiesBuilt for inline placement within a beverage production or used bottling line, the unit integrates upstream with preparation and deaeration modules and downstream with sterile tanks, fillers, or homogenizers typical of industrial packaging. Format agility at the process level makes it suitable for multiple juice recipes and still beverage SKUs, helping plants adapt to seasonal or private-label demands without extensive hardware changes.Machine Condition & Maintenance HistoryThis is a second hand aseptic pasteurizer previously used for tomato juice and still (non-carbonated) drinks. It is presented as operationally ready for deployment, offering a practical choice for producers seeking proven equipment with established performance characteristics in beverage processing environments.Operational Performance & VersatilityThe system’s aseptic flash process, 125 °C temperature rating, and integrated deaeration help protect color, aroma, and nutritional attributes while reducing dissolved oxygen for improved shelf life. Its capacity range—currently set around 6,000 L/h with headroom to 12,000 L/h—supports both pilot-scale and medium-scale beverage production. This configuration is well suited to juice applications and other still beverages requiring controlled thermal treatment.Installation Requirements & Site PreparationThe pasteurizer is typically skid-mounted for straight... Nedpjz E Dlcofx Ab Uewl

Condition: used, Year of construction: 2011, operating hours: 1,878 h, machine/vehicle number: TP124, Used Tetra Pak AB straw applicator 2011Technical Specifications & Performance DataThe Straw Applicator 30 is a dedicated packaging machine engineered to apply individual drinking straws onto carton packages with high accuracy and repeatability. Manufactured by Tetra Pak Packaging Solutions AB, this second hand unit is well suited for integration within beverage production and industrial packaging lines focused on carton handling. With low operating hours and CE compliance, it offers dependable performance for producers seeking to upgrade or expand a used bottling line or carton packaging operation.Manufacturer: Tetra Pak Packaging Solutions ABMachine type: Straw Applicator 30Model: 30Year of manufacture: 2011Production speed: up to 16,400 packs per hour (dependent on pack format and line speed)Container compatibility: Carton packagesSupported format: Tetra Classic Aseptic (tetrahedral)Primary function: Automated application of individual straws to preformed, filled, and wrapped cartonsOperating hours (hour meter): 1,878.6 hDrawing specification: 86335D-300CE marking: YesAdvanced Automation & Control SystemsThis machine employs a robust, PLC-based architecture with an HMI operator panel for recipe management, real-time status visualization, and streamlined diagnostics. Integrated sensors monitor straw presence and placement, while alarms and fault messages support rapid troubleshooting and reduced downtime. Quick-change parts enable efficient format adjustments, enhancing flexibility on mixed-format packaging lines.PLC-based control with HMI for set-up, recipes, and monitoringIntegrated sensors for straw presence and placement verificationAlarm and diagnostic functions for rapid fault resolutionQuick-change components for format changeoversCE-compliant guarding and interlocksProduction Line Integration CapabilitiesDesigned for inline operation, the Straw Applicator 30 synchronizes with upstream carton fillers and conveyors, as well as downstream bundling or case packing systems. Its control interfaces facilitate signal exchange for smooth product flow and coordinated speed control across the industrial packaging line.Inline integration with carton fillers and conveyor systemsInterface-ready for upstream/downstream signal exchangeFormat change flexibility for multiple carton sizes and straw typesSuitable for beverage production environments focused on carton packagingMachine Condition & Maintenance HistoryThis second hand unit presents as a low-hour machine with a clear operational profile. The hour meter indicates limited use, supporting extended service potential. Maintenance should follow OEM guidelines to sustain reliability and performance in continuous-duty applications common to beverage and industrial packaging operations.Operational status: Ready for operationLow operating hou... Nsdpfx Abjz E Dk So Uswl

Condition: used, Year of construction: 2004, machine/vehicle number: LC637, Used Sidel-Krones PET bottling line 18000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for PET bottle handling and optimized for still water applications. Built with premium components from Sidel, Krones, AROL, SMI, Twinpack, ACMI, TOSA, ., and Videojet, it delivers consistent performance at industrial scale. The line operates at a production capacity of 18,000 bph and is configured for the most common market formats.Production speed: 18,000 bph 2L, 23.000 BPH 0,5L Container types: PET bottlesBottle formats: Compatible with 0.5L and 2.0L bottle formatsPrimary components: Sidel SBO 16 Series 2 blow molder (16 molds), Sidel ALSIM gravity filler (63 valves), AROL capping system (pre-threaded plastic caps), Krones CONTIROLL roll-fed labeler (1 station, 16 bottle plates), SMI SK452 F shrink wrapper, Twinpack MHTE handle applicator, ACMI PASAR P130 2L layer palletizer, TOSA 125 + 475 ring pallet wrapper, . R 13/2 preform tipper, Videojet 3210 laser coderAir recovery: Integrated with blow molderChiller: Not includedTooling: Blow molds not includedBuild years (components): 2000–2024Advanced Automation & Control SystemsThe line integrates modern automation features across critical stations to ensure stable performance and high-quality output in beverage production. The Krones CONTIROLL labeler features electric head adjustment for precise label placement, while the capping system by AROL uses a pick & place distribution to ensure reliable application of pre-threaded plastic caps. The Sidel ALSIM filler operates within a pressurized cabin equipped with filters to support hygienic filling conditions.The Sidel blow molder includes an air recovery system to optimize compressed air utilization. Operator interfaces across the equipment provide intuitive adjustment and monitoring, supporting quick startups, changeovers, and routine operations in high-throughput environments typical of industrial packaging.Production Line Integration CapabilitiesThis second hand used bottling line is designed for seamless integration from preform handling to end-of-line palletizing. The . preform tipper, hopper, elevator, and preform infeed supply the Sidel SBO 16 Series 2 rotary blow molder. Downstream, the gravity filler and AROL capping machine form a robust monobloc for consistent filling and closure application. The Krones CONTIROLL labeler applies plastic wrap-around labels via a roll-fed station, supported by a Videojet 3210 laser coder for high-contrast coding. Secondary and end-of-line packaging are handled by the SMI shrink wrapper, Twinpack handle applicator, ACMI layer palletizer, and TOSA ring wrapper.Inline configuration from preform tipping through palletizingFormat change capabilities for 0.5L and 2.0L PET bottlesSuitable for water production with PET containersMachine Condition & Maintenance HistoryThis used bottling line is presented in working condition with components manufactured between 2000 and 2024, including a recent 2024 Videojet coder for coding in... Nwsdpfxjz E Dk Eo Ab Uol

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 9,000 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2008Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000 Nwedpfez E Dkxox Ab Ujl

Condition: used, machine/vehicle number: TP121, Used AROL 8 head capping machine - 16000 BPHTechnical Specifications & Performance DataThis rotary capping machine is engineered for high-efficiency closure application on PET bottles across beverage and food sectors. Manufactured by Arol, it features an 8-head rotary configuration designed to deliver stable throughput and precise cap application at industrial speeds. Its compact footprint and ergonomic working height support streamlined operation within modern bottling equipment layouts and industrial packaging environments.Manufacturer: ArolMachine type: Rotary Capping MachineModel: 8 testeNo. of capping heads: 8Maximum speed: up to 16,000 bphContainer material: PETNeck/closure specification: 38 mm threadRotation direction: CounterclockwiseTransfer type: Body handlingMaximum bottle height: 320 mmWorking table height (H): 1200 mmElectrical supply: 400 V, 3 PH, 50 HzAdvanced Automation & Control SystemsBuilt for consistency and reliability, this rotary capper supports precise application of 38 mm plastic screw closures on PET containers. The 8-head turret ensures uniform torque distribution and repeatable performance across sustained production runs. The electrical configuration (400 V, 3-phase, 50 Hz) aligns with common industrial power standards, facilitating straightforward integration with existing control panels and line PLCs. Quick format adjustments and operator-friendly settings help reduce changeover times and improve uptime in beverage production and industrial packaging operations.Production Line Integration CapabilitiesThe machine integrates seamlessly into a used bottling line or a new installation as a standalone capper. Counterclockwise rotation and body-handling transfer allow smooth infeed/outfeed with standard conveyors. A cap elevator is available as a separate option to automate cap feeding and maintain continuous operation. Bottle handling supports PET formats within a height range up to 320 mm, enabling multi-product flexibility across water, soft drinks, wine, beer, milk, and oil lines.Machine Condition & Maintenance HistoryThe unit is ready for operation. It has been overhauled and is offered with a 6-month warranty. Supplied with compatible spare parts, it is presented in ready-to-use condition and available on an “as seen and approved” basis—ideal for facilities seeking a dependable second hand capper with minimized commissioning time.Operational Performance & VersatilityDesigned for PET containers with a 38 mm threaded neck, this rotary capper suits a wide scope of beverage and food applications. It is an excellent fit for water (still and sparkling), soft drinks (CSD), wine, beer, milk, and edible oil. The 8-head configuration balances speed and gentle handling, maintaining product integrity and closure quality at up to 16,000 bottles per hour. Its industrial-grade build and precise head motion support consistent sealing performance within demanding production schedules.Installation Re... Nedjz E Dkrjpfx Ab Ujwl

Condition: used, machine/vehicle number: TP120, Used AROL 10 head capping machine - 20000 BPHTechnical Specifications & Performance DataManufactured by Arol, this rotary capping machine is engineered for high-speed beverage and food packaging applications. With a robust rotary design and 10 capping heads, it ensures consistent torque application and stable, continuous motion for reliable closure performance. The machine is ideal for integration into a used bottling line or as a second hand upgrade within modern industrial packaging and beverage production environments.Manufacturer: ArolMachine type: Rotary capping machineProduction speed (max): 20,000 bphNo. of heads: 10Container material: PETThread/neck size: 38 mmMaximum bottle height: 320 mmWorking table height: 1200 mmWork direction: ClockwiseTransfer type: Body transferElectrical supply: 400 V, 3-phase, 50 HzAdvanced Automation & Control SystemsThe rotary platform with 10 heads provides continuous capping at high speed with precise, repeatable application. Operator-oriented controls support efficient start-up and adjustments, while the clockwise rotation facilitates standard inline layouts. Changeover between formats is streamlined by the rotary architecture, and an optional cap elevator is available to support automated cap feeding and increased autonomy.Production Line Integration CapabilitiesThis Arol capper is designed for smooth integration with upstream fillers and downstream inspection or labeling systems in a complete packaging line. Body transfer handling provides stable container control through the capping carousel, reducing scuffing on PET bottles and maintaining line efficiency. The machine is suitable for a wide range of beverage production setups and industrial packaging lines, providing flexibility for multiple product types and closure programs based on a 38 mm neck finish.Machine Condition & Maintenance HistoryThe unit is ready for operation, overhauled, and guaranteed to ensure immediate deployment on your production floor. It is offered with a 6-month warranty period. The machine is described as ready to use, with compatible spare parts available, reflecting diligent maintenance and a strong service profile suitable for rigorous daily operation.Operational Performance & VersatilityConfigured for PET bottle handling, the capper supports products such as still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The 38 mm threaded neck finish is common across dairy, juice, and other beverage applications, enabling efficient closure application at up to 20,000 bottles per hour. The rotary mechanism helps ensure uniform torque and seal integrity, contributing to consistent product quality in high-throughput environments.Installation Requirements & Site PreparationInstallation requires standard industrial power at 400 V, 3-phase, 50 Hz. The working table height of 1200 mm and maximum bottle height of 320 mm support ergonomic line design and compatibility with typical conveyors and starwheels. T... Nwedpfxjz E Dklj Ab Ujl

Year of construction: 2001, condition: used, machine/vehicle number: AT109, Used CAMES bottle dryer - Year 2001Technical Specifications & Performance DataThis pre-owned bottle drying tunnel is engineered to remove surface moisture from containers before downstream operations. Manufactured by CAMES, model TNN 1, it provides consistent air-blown drying to stabilize labels and packaging quality across a wide range of beverage production lines. Its continuous tunnel configuration supports steady throughput and uniform drying performance suitable for high-demand industrial packaging environments.Manufacturer: CAMESModel: TNN 1Year: 2001Machine type: Drying Tunnel (air-blowing)Primary function: Bottle surface drying prior to labeling and packagingContainer compatibility: Designed for PET and Glass bottle handlingOperating principle: Directed airflow across bottle surfaces in a continuous tunnelIntegration: Inline installation on conveyors between rinsing/filling and labelingAdvanced Automation & Control SystemsThe CAMES TNN 1 supports stable and repeatable drying through controlled airflow within the tunnel section. Typical integration includes line start/stop synchronization, safety interlocks with upstream and downstream equipment, and straightforward operator controls for airflow adjustments. The tunnel concept minimizes manual intervention, helping maintain consistent bottle dryness that is critical for pressure-sensitive or glue-applied labels.Production Line Integration CapabilitiesBuilt for inline operation, this drying tunnel integrates seamlessly with conveyors and standard bottling layouts. It fits naturally between rinsing/filling and labeling stations, ensuring bottles are properly conditioned for high-quality labeling and subsequent packaging. The CAMES TNN 1 accommodates multiple bottle sizes and shapes commonly used in beverage production, supporting flexible format changes with mechanical adjustments and change parts as required by the line.Machine Condition & Maintenance HistoryThis is a second hand drying tunnel from 2001, suitable for integration into a used bottling line. Its straightforward, robust design favors routine maintenance and predictable operation in industrial environments. As with all pre-owned bottling equipment, maintenance schedules and line-specific service records can be aligned with the receiving plant’s preventive maintenance plans.Operational Performance & VersatilityThe CAMES TNN 1 improves downstream quality by ensuring reliable bottle dryness prior to label application. Consistent drying reduces label defects, enhances packaging appearance, and supports efficient line speeds. Its air-blowing tunnel architecture works across a wide range of beverage production scenarios and container materials, making it a versatile choice for industrial packaging facilities that manage diverse bottle formats and product portfolios.Installation Requirements & Site PreparationInstallation involves positioning the tunnel over an existing conveyor section with adequate straight runs upstream and downstream for smooth bottle flow. Site preparation typically includes providing the appropria... Nedpfx Absz E Dkfj Ujwl

Condition: used, Year of construction: 2001, machine/vehicle number: LC651, Used KRONES filling line for Vodka - glass 6000 BPH - Year 2001Technical Specifications & Performance DataThis complete glass bottling line, engineered around Krones equipment, is optimized for still strong spirits in non-returnable glass bottles. Configured with a dedicated rinser, a vacuum filling monoblock, a dual-carousel cold-glue labeling and tax-stamp system, and tray-plus-film secondary packaging, it delivers consistent performance for premium spirits presentation.Year: 2001Nominal speed: 6,000 bph on 0.7L formatContainers: Non-returnable Glass bottles; shapes handled: round, flask, shtoffFormats supported: 0.2L, 0.25L, 0.37L, 0.375L, 0.5L, 0.7L, 0.75LRinser: Krones Varioject 1440-24-188; rotary, 24 nozzles; single-channel; fixed nozzles; pre-treated water; gravity draining; no air blowFiller-Capper: Krones Vacufill 960-024-124-V; vacuum filling for still spirits; 24 filling valves; capper with 4 headsClosures: ROPP aluminum and Guala non-refillableLabeler: Krones Prontomatic / Taxomat 720-9-3-180 TA; cold glue; pre-cut paper labels; U-shape tax stamp 160 x 20 mmPacker: MEYPACK VP410; tray + filmConveyors: Krones Synco S bottle conveyors; Krones pack conveyorsControls: Siemens S7 PLC; electrical cabinets includedAdvanced Automation & Control SystemsThe line integrates centralized automation using a Siemens S7 PLC for reliable sequencing of rinsing, vacuum filling, labeling, and packaging. Electrical cabinets are included, supporting line interlocks, safety circuits, and device control. The rotary platforms and mechanical cam systems in the labeling/tax-stamping station ensure repeatable precision at rated speeds, while format-specific change parts support quick, accurate format transitions.PLC/HMI: Siemens S7 PLCControl architecture: Centralized line control with machine-to-machine interlocksSafety: Emergency-stop circuits and guarding typical of Krones rotary equipmentChangeover: Format parts for multiple glass shapes and volumesProduction Line Integration CapabilitiesDesigned for cohesive in-line operation, this used bottling line connects rinsing, vacuum filling, cold-glue labeling with tax stamping, and tray-plus-film packaging via Krones conveyor systems. It is ideal for second hand industrial packaging upgrades in beverage production focused on spirits in glass bottles. The broad format coverage supports brand portfolios requiring flask and shtoff bottles across multiple sizes.Machine typeManufacturer / ModelYearVarious EquipmentKrones Synco S (Conveyors) Nedpfx Aboz E Di Us Ujwl

Condition: used, Year of construction: 2009, machine/vehicle number: CA82, Used ROBINO & GALANDRINO capsuling machine - Year 2009Technical Specifications & Performance DataThis automatic capsuling monoblock is engineered for precision capsule application on bottles within a professional bottling environment. Manufactured by Robino & Galandrino, the SUPERBLOC series is renowned for robust construction, reliable operation, and high-quality finishes on glass bottles used in beverage production. The model identified is SUPERBLOC M 4 T, built in 2009 and CE marked for compliance with European safety and machinery directives. This second hand machine is suitable for integration in a used bottling line, supporting industrial packaging requirements for beverage producers.Manufacturer: Robino & GalandrinoModel designation: SUPERBLOC M 4 TYear of manufacture: 2009Machine type: Automatic capsuling monoblock (rotary platform)Container compatibility: Glass bottles (cylindrical and common wine-style profiles)Marking: CEApplication: Industrial beverage packaging and bottlingAdvanced Automation & Control SystemsDesigned for consistent capsule application with minimal operator intervention, this monoblock typically features synchronized drives and an integrated control panel for recipe management and format changes. Safety interlocks and guarding protect operators, while emergency stop circuits meet CE standards. The automation concept supports precise capsule positioning and repeatable performance across production runs.Integrated control panel with machine diagnosticsAutomatic magazine feed and capsule distribution (depending on configuration)Quick adjustment for bottle height and capsule lengthCE-compliant safety circuits and guardsProduction Line Integration CapabilitiesThe SUPERBLOC M 4 T is designed to operate inline with upstream and downstream bottling equipment. It couples efficiently with fillers, corkers, wirehooders, and labelers via standard conveyors. Format changeovers accommodate common glass bottle sizes used in beverage production, enabling flexible operation within mixed-format lines.Inline or standalone operation with synchronized conveyorsCompatible with upstream corking/capping and downstream labelingFormat change components for multiple bottle diameters and heightsMachine Condition & Maintenance HistoryManufactured in 2009 and CE marked, this second hand capsuling monoblock reflects the durable engineering of Robino & Galandrino equipment. The SUPERBLOC platform is known for accessible maintenance points, rugged mechanical assemblies, and availability of wear parts, supporting long-term reliability in beverage production environments.Operational Performance & VersatilityThis capsuling monoblock is suitable for a variety of capsule materials commonly used in beverage packaging. Depending on the installed heads and accessories, it can process PVC shrink capsules, polylaminate aluminum capsules, and specialized capsules for sparkling programs. The rotary layout ensures consistent application and alignment, del... Nodpfx Ajz E Di Ieb Ujwl

Condition: used, machine/vehicle number: LC674, Used MEC ISO DPS 12-12-1C bottling line - 2600 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling in 0.33L and 0.5L formats. The line combines filling, carbonation, sterile filtration, CIP cleaning, labeling, date coding and rotary bottle handling equipment for beverage production and industrial packaging applications.Container type: Glass bottlesCompatible formats: 0.33L and 0.5L bottlesFiller: Eurostar ISO DPS 12/12/C counter-pressure filler, 2,600 bphSTS labeling machine: S2T3/R1 front, back and neck labeling with date stamping, 2,500 bphCanellitech wraparound labeling machine: 3,000 bphCondition: Fully refurished in 2022. Filtration: 5 micron, 1 micron and 0.45-micron sterile filtration stagesCIP system: 2 x 350L tanksAdvanced Automation & Control SystemsThe line includes dedicated date-coding equipment, combining the STS integrated date stamp with a separate Overprint inkjet date stamp. This arrangement supports product identification and coding requirements within a glass bottle bottling process. The Carbotech 1000 carbonator is equipped with an upgraded variable overpressure pump to support controlled carbonation operations.The listed CIP, filtration and product-preparation equipment provide key process support for beverage production. Machines of this type are normally coordinated with bottle handling and packaging machinery to maintain a consistent production flow.Production Line Integration CapabilitiesThis complete bottling line is designed around counter-pressure filling of glass bottles and can be integrated with upstream product preparation and downstream industrial packaging equipment. Rotary loading and offloading tables support bottle transfer around the filling and labeling section. Full change parts are included for 0.33L and 0.5L bottle formats, supporting format changes between the stated bottle sizes.Machine typeManufacturer / modelYearVarious EquipmentITPL Filtration System2022Various Equipment6 PD CIP System2022Filling MachineEurostar ISO DPS 12/12/C2006SaturatorCarbotech 10002021Labeling MachineSTS S2T3/R12015 Nodpfx Aoz E Dizsb Uswl

Condition: used, Year of construction: 2006, machine/vehicle number: LC672, Used Vitone V5 decanter for oil - 90ql MalaxeTechnical Specifications & Performance DataThe Vitone V5 is a used oil decanter system designed for separation duties within an olive oil processing operation. The system is configured around a decanter unit with a stated processing capacity of 50 q/h. It includes a 90 ql malaxer, an electrical control panel and an Alfa Laval separator, creating a coordinated processing package for oil production.Manufacturer: VitoneModel: V5Year: 2006Processing capacity: 50 q/hIncluded malaxer capacity: 90 qlIncluded equipment: electrical control panel, Alfa Laval separator and malaxerAdvanced Automation & Control SystemsAn electrical control panel is included with the decanter system to support operation and coordination of the processing equipment. The decanter assembly incorporates mechanically driven separation equipment, while the supplied control panel provides the basis for integrating the system into an oil extraction process. Control, motor and electrical specifications should be assessed during installation and recommissioning.Production Line Integration CapabilitiesThis oil-processing package is suited to the extraction and separation stages of an olive oil production plant. The malaxer prepares the olive paste before decanting, while the Alfa Laval separator supports downstream clarification and phase separation. The system does not handle containers or packaging formats directly; it is intended for process integration before bottling, labeling, capping and other industrial packaging operations.Machine typeManufacturer / modelYearMalaxerNot statedDecanterVitone V52006Centrifugal SeparatorAlfa LavalMachine Condition & Maintenance HistoryThis second hand oil decanter system is already dismantled and in storage. Its disassembled condition can simplify transport planning and allow the buyer to organize the layout of the malaxer, decanter, separator and electrical panel according to site requirements. Reassembly, mechanical inspection and functional commissioning are key stages before the equipment is returned to production.Operational Performance & VersatilityThe Vitone V5 decanter system is intended for oil processing applications, combining malaxing, decanting and separation functions. The 90 ql malaxer supports paste conditioning ahead of the decanter, while the included Alfa Laval separator is part of the final separation process. This configuration is relevant for processors seeking used bottling line ... Nodpfx Aoz E Diueb Uewl

Condition: used, machine/vehicle number: LC656, Used PIERALISI oil extraction plant with decanter J2Technical Specifications & Performance DataThis complete olive oil extraction line centers on a Pieralisi J2 decanter and includes upstream preparation and downstream separation for continuous processing. The configuration is engineered for farms, cooperatives, and industrial facilities seeking reliable second hand equipment to integrate upstream of bottling and industrial packaging operations. Manufactured by Pieralisi with complementary stainless steel equipment, the line supports robust operation for edible oil production.Main decanter: Pieralisi J2 decanter centrifugeHourly throughput (decanter): 25–30 ql/hSeparators: 2 centrifugal separatorsMalaxers: 3 malaxers, type SiciliaPreparatory malaxer: 1 unit, capacity 5 qlCrusher: Hammer crusherWasher: Santoro washer in stainless steelDefoliator: Leaf-removal infeed conveyorConstruction: Food-grade stainless steel on washer and process-contact equipment as specifiedAdvanced Automation & Control SystemsThe line is designed for continuous, stable operation with straightforward operator interfaces suitable for food processing environments. Mechanical and process controls support steady feed, uniform malaxing, and consistent separation parameters around the Pieralisi J2 decanter. Safety guarding and emergency stop functions are standard practice for operators working around the crusher, conveyors, and rotating equipment.Production Line Integration CapabilitiesThis extraction line integrates seamlessly upstream of edible oil bottling equipment such as filling, capping, and labeling machines. It can be aligned with existing conveyors and storage tanks, enabling a complete processing-to-packaging workflow for food and beverage production environments. Format flexibility stems from process tuning (crushing, malaxing times/temperatures, and separation) to match different olive varieties and quality targets before transfer to bottling lines.Machine type/categoryManufacturer/ModelYearVarious Equipment — Defoliator Conveyor—Various Equipment — WasherSantoroVarious Equipment — CrusherHammer crusherVarious Equipment — MalaxerPreparatory malaxer, 5 qlVarious Equipment — Malaxer3 units, type Sicilia Nwsdpez E Dinsfx Ab Ujl

Condition: used, Year of construction: 2008, machine/vehicle number: TP128, Used AROL Pick & Place capping machine 10000 BPHTechnical Specifications & Performance DataThis Arol capping machine is designed for the closure stage of a used bottling line, applying T caps and plastic screw caps to bottles. Its pick-and-place capping system supports accurate cap handling and controlled application in beverage production and industrial packaging operations.Manufacturer: ArolYear: 2008Maximum output: up to 10,000 bottles per hourCapping system: Pick-and-placeCap types: T cap and plastic screw capRotation direction: ClockwiseDocumented head configuration: 8 heads, with references to 6 T-cap heads and 6 screw-capping headsAdvanced Automation & Control SystemsThe pick-and-place system is intended to position caps before closure, supporting repeatable capping operations at line speed. Clockwise rotation is specified for the machine configuration. During refurbishment, the capping head setup, cap delivery components, sensors, drives, and control functions can be assessed to ensure correct synchronization between bottle handling and cap application.The machine can be incorporated into an automated bottling equipment layout with suitable infeed and discharge transfer systems. Its cap-handling arrangement is relevant for facilities processing different closure styles, subject to the installed tooling and bottle-neck compatibility.Production Line Integration CapabilitiesThis capping machine is suited to installation downstream of a filling machine and upstream of labeling, inspection, or secondary packaging equipment. It can form part of a second hand bottling line for PET and Glass bottles, where reliable closure application is essential before bottles continue to the next packaging stage.For industrial packaging and beverage production, conveyors must present bottles consistently to the capping carousel and remove closed bottles without interrupting line flow. Bottle guides, starwheels, cap feed arrangements, and change parts should be matched to the required bottle profile, neck finish, cap dimensions, and closure type.Machine Condition & Maintenance HistoryThe machine is under maintenance and requires refurbishment. This status makes it appropriate for buyers planning a technical review and overhaul before commissioning. A refurbishment programme can focus on the mechanical condition of the capping heads, pick-and-place mechanism, cap transfer components, rotary transmission, and bottle-handling interfaces.Inspection of wear parts, lubrication points, guarding, electrical components, and format-related tooling is important before the machine is returned to service. The stated 2008 manufacturing year provides useful context for planning servicing, replacement parts, and integration into an existing production line.Operational Performance & VersatilityThe Arol capping machine combines T-cap and plastic screw-cap capability with a pick-and-place operating principle. This makes it relevant where a bottling operation requires dedicated closure handling for bottles fitted with these cap styles. The specified maximum capacity of up to 10,000 bottles p... Nwedpfsz E Dihex Ab Uel

Condition: used, machine/vehicle number: LC661, Used CFT-JORDAN complete fruit and vegetable puree production lineTechnical Specifications & Performance DataThis used bottling line is configured as a complete aseptic filling and processing line for fruit and vegetable purees. It integrates preparation, thermal treatment, deaeration, sterilization, and aseptic bag-in-bin/bag-in-drum filling. Designed for industrial packaging and food-grade production, it offers second hand value with robust stainless steel construction and modular components suitable for continuous operation.Main aseptic filler: MACROPACK TM2000/3Filling performance: up to 90 bags/hour (220.0L) or 30 bins/hour (1000.0L)Processing capacities (typical): crushers 9–15 t/h; enzymatic deactivators 20 t/h; vacuum deaerator 20 t/h; sterilizer 17 t/hThermal equipment: Pasteurizer 1.5 t/h (4000 x 1600 x 2350 mm); Enzymatic Deactivators ETS 20 fast/slow; Sterilizer OLIMPIC TC XX/ASUtilities (selected): sterilizer steam 2100 kg/h; deactivator steam 2000 kg/h; aseptic filler steam 50 kg/hKey powers (selected): Sterilizer 120 kW; Enzymatic Deactivator fast 18 kW; slow 12.5 kW; Aseptic filler 10 kW; pumps 1.2–18.5 kWMaterials: stainless steel tanks and sanitary pumps for hygienic product contactContainer formats: 220.0L bags; 1000.0L binsAdvanced Automation & Control SystemsThe line features modular automation at machine level with integrated motor control on pumps and thermal units. The aseptic filler is equipped for controlled dosing and steam-assisted sterilization of filling circuits. Operator panels on key units enable parameter setting for temperatures, flow rates, and timings. Safety interlocks and emergency stops are included on major modules such as the sterilizer, deactivators, and filler. Quick-change product hoses, sanitary clamps, and pump speed adjustments support rapid changeovers between puree types and package sizes.Production Line Integration CapabilitiesThis second hand aseptic processing and used bottling line is engineered for cohesive operation across preparation, thermal treatment, deaeration, sterilization, and aseptic filling. The included conveyors, pumps, and buffer tank ensure stable product flow, while the CIP station enables in-place cleaning of product-contact circuits. The system suits food and beverage production environments handling natural and concentrated purees.Machine typeManufacturer / ModelYearVarious EquipmentA Facchini 905/20 (Elevator)2007Various EquipmentCrusher 15 t/h (circular blades)Various EquipmentCrusher 9 t/h (studded shaft) Njdez E Dh Dopfx Ab Uewl

Condition: used, Year of construction: 2012, operating hours: 17,600 h, machine/vehicle number: SO140, Used KOSME blower unit 6 cavity - 12000 BPHTechnical Specifications & Performance DataThis rotary blow molding machine by KOSME delivers reliable PET bottle production with a proven 6-cavity configuration. Optimized for beverage production and industrial packaging, it achieves a maximum output of 12,000 bottles per hour on the 0.5L format. An energy-saving ceramic oven and an additional air recovery system support efficient operation, reducing both power and compressed air consumption. The machine comes customized for 28 mm neck finishes, aligning with common beverage closures used in water and CSD packaging.Manufacturer: KOSMEYear: 2012Architecture: RotaryNo. of cavities: 6Maximum output: 12,000 bottles/hour (0.5L)Container type: PET bottlesNeck finish: 28 mm customizationHeating system: Energy-saving ceramic ovenAir system: Additional air recoveryElectrical: 400 V, 50 Hz, 27 kWOperating hours: 17,600 hoursAdvanced Automation & Control SystemsThe machine features a robust control panel for process set-up and monitoring, supporting stable heating profiles across the ceramic oven zones and precise blow parameters for consistent bottle quality. Recipe-based settings streamline format optimization while minimizing operator intervention. Safety guarding and interlocks protect operators during production and changeovers, and the system supports efficient warm-up and standby modes to reduce energy use during short stops.Production Line Integration CapabilitiesDesigned for seamless integration in a used bottling line or as a standalone stretch-blow module, this unit interfaces easily with standard preform handling systems and downstream PET filling, labeling, and secondary packaging machinery. It supports beverage production workflows where high efficiency and quick synchronization with conveyors and accumulation systems are required.Inline or standalone operationCompatible with standard preform handling equipment (elevator, tipper, unscrambler)Interfaces with PET fillers, labeling machines, shrink wrappers, and palletizersFormat noted: 0.5L; additional sizes can be configured with appropriate toolingMachine Condition & Maintenance HistoryThe machine is currently in production and reported in very good condition. It has approximately 17,600 operating hours and has recently undergone its scheduled 18,000-hour maintenance. Documentation is available to support commissioning, operation, and maintenance activities, ensuring a smooth start-up in a second hand or upgraded industrial packaging environment.Currently in productionVery good conditionRecent 18,000-hour maintenanceManuals availableOperational Performance & VersatilityWith a 6-cavity rotary platform and energy-saving ceramic oven, the machine offers stable production at 12,000 bph on 0.5L PET bottles. The additional air recovery system enhances efficiency by redu... Nwedjz E Dh Rspfx Ab Uol

Year of construction: 1999, condition: used, machine/vehicle number: LC654, Used ALFA LAVAL oil production lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous production with a throughput of 2 tons per hour. Built around proven Alfa Laval technology, the line combines robust mechanical design with food-grade materials to ensure reliable operation and consistent oil quality. Its modular configuration streamlines the core olive oil extraction steps from washing and preparation through malaxation and separation.Overall capacity: 2 tons/hourDecanter centrifuge: Alfa Laval NX 17Disc separators: Alfa Laval 407, automatic (2 units)Malaxers (double): Stainless steel (3 units)Malaxer (small): Stainless steel, with paste pump P 60 (1 unit)Crusher: Stainless steelOlive elevator: Integrated feedingOlive washer: Pre-cleaning and debris removalElectrical control panel: Alfa LavalConveying: Various screw conveyors for paste and by-productsThe equipment list emphasizes sanitary stainless-steel construction, automated separation, and balanced material handling to minimize oxidation, protect product integrity, and support high-efficiency operation.Advanced Automation & Control SystemsAutomation centers on an electrical control panel that coordinates key process units for safe, consistent performance. Automated Alfa Laval 407 disc separators provide steady clarification with reduced manual intervention. Interlocks and standard operator safeguards support secure running and streamlined start/stop routines. The configuration is designed for straightforward parameter control, facilitating repeatable results across production shifts.Production Line Integration CapabilitiesThe line is configured for seamless integration from raw olive reception to downstream storage tanks and final packaging. Its modular equipment layout connects via screw conveyors, an olive elevator, and a washer, enabling continuous flow into the crusher, malaxers, decanter, and separators. This processing core can be paired with industrial packaging solutions or a used bottling line for vegetable oil filling into PET or glass containers, aligning with broader beverage production and food-oil packing environments.Machine type/categoryManufacturer / ModelYearOlive Washer—Olive Elevator—Olive CrusherStainless steelMalaxers (double)Stainless steel Nodez E Dibepfx Ab Ujwl

Condition: used, Year of construction: 2002, machine/vehicle number: CA83, Used ROBINO & GALANDRINO monostadio z 8 t capsuling machine- Year 2002Technical Specifications & Performance DataThis Single-stage Capsuling Machine Z 8 T by Robino & Galandrino is a robust solution for capsule application on glass bottles, engineered for wine and sparkling wine producers seeking reliable performance in a second hand, used bottling line environment. Built with Italian precision, it offers consistent capsuling quality and seamless integration into industrial packaging and beverage production workflows.Manufacturer: Robino & GalandrinoModel: Z 8 T (Monostadio)Year: 2002Configuration: Single-stage capsulingNo. of heads: 8Capsule types: PVC shrinkable plastic; Champagne/sparkling wineRotation direction: CounterclockwiseOptical centering: Not equippedContainers: Glass bottlesCompliance: CE markedAdvanced Automation & Control SystemsDesigned for dependable operation within professional bottling equipment setups, this capsuling machine supports stable, repeatable processes. Its single-stage architecture simplifies adjustments and minimizes changeover time. Operator functions are straightforward, ensuring efficient routine operations. Standard machine protections and CE conformity support safe use on modern production floors.Streamlined controls for routine start/stop and adjustmentsQuick changeovers aligned with single-stage designMechanical alignment without optical centering for robust, low-maintenance operationSafety guarding consistent with CE conformityProduction Line Integration CapabilitiesThe Z 8 T integrates easily as a standalone station or inline within a complete used bottling line. It accepts upstream glass bottle handling and passes consistently capped bottles downstream to labeling or inspection modules, supporting flexible industrial packaging layouts.Inline or standalone operationCompatible with standard glass wine bottle handling conveyorsSuitable for integration after corking/capping and before labelingCapsule application for both PVC shrink and sparkling wine formatsMachine Condition & Maintenance HistoryThis machine is currently in storage, making it available for rapid deployment into beverage production environments after routine commissioning. The overall configuration, CE conformity, and preserved components provide a solid foundation for reliable second hand operation.Current status: In storageCE marked unitSingle-stage, 8-head layout preservedOperational Performance & VersatilityOptimized for wine sector applications, the Z 8 T manages both PVC shrink capsules and champagne/sparkling wine formats. Its counterclockwise carousel and 8-head configuration deliver balanced throughput for small to mid-scale wineries and beverage producers.Ideal for Wine and sparkling wine productionConsistent application of PVC sh... Nsdpfx Asz E Dhwjb Uswl

Condition: used, Year of construction: 2016, machine/vehicle number: PST34, Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice / concentrate (non-dairy)Documentation: Full documentation and user manual includedAdvanced Automation & Control SystemsThe integrated touchscreen HMI provides intuitive operation, real-time process visualization, and streamlined recipe management for consistent pasteurization results. Automated control of temperature, product flow, and holding time supports stable performance and product safety. Alarm handling, trend logging, and guided operator prompts help ensure repeatable processes with minimal downtime. The system’s CIP-ready design allows automated cleaning sequences to be managed from the control interface for efficient changeovers and hygiene assurance.Production Line Integration CapabilitiesEngineered for seamless integration in beverage production environments, this flash pasteurizer connects upstream to blending, filtration, and storage tanks, and downstream to fillers and industrial packaging systems. The skid-mounted footprint simplifies placement and utilities hook-up, enabling fast commissioning within second hand or upgraded processing setups. Its continuous operation supports steady flows into downstream filling and labeling equipment, helping maintain overall line efficiency.Machine Condition & Maintenance HistoryThe unit has a documented non-dairy product history processing apple juice and concentrate, contributing to a clean internal condition profile. Supplied with full documentation and user manual to facilitate installation, operation, and maintenance. Presented as a second hand pasteurization system suitable for beverage production environments seeking dependable thermal treatment with compact installation.Operational Performance & VersatilityThe tube-in-tube configuration is well-suited for juices, concentrates, and similar non-dairy beverages where gentle handling and stable heat transfer are critical. The design supports rapid heat-up and controlled holding for effective microbial inactivation while preserving product quality attributes. The CIP-ready construction, sanitary connections, and stainless steel surfaces... Nsdpfjz E Dhqjx Ab Uowl

Condition: used, Year of construction: 2014, machine/vehicle number: LC675, Used CSAK brewing canning line 2500 cans-hourTechnical Specifications & Performance DataThis complete canning line is a used, fully reconditioned industrial packaging system designed for beer production in standard 330 ml cans. Built around an atmospheric filling process, the line provides a coordinated solution for empty-can handling, filling, labeling and date or lot coding.Production capacity: 2500 cans/hCan format: 0.33L standard cansFilling method: Atmospheric filling, not counter-pressure fillingFiller manufacturer: Cask Brewing SystemsYear: 2014Advanced Automation & Control SystemsThe line includes guarded conveyor-based equipment with integrated operator controls. Visible features include touchscreen control interfaces, status-light towers, pushbutton controls and emergency-stop devices. Pneumatic lines, valves and adjustable conveyor guide components support controlled handling through the packaging process.Production Line Integration CapabilitiesThis complete canning line combines essential process stages for beer canning, from depalletizing empty cans through atmospheric filling, labeling and coding. It can be integrated with upstream beer-processing equipment and downstream secondary packaging machinery through suitable conveying and line-control arrangements.Machine typeManufacturer / modelYearDepalletizerCan depalletizer/elevatorFilling MonoblockCask Brewing Systems atmospheric filler2014Labeling MachineS2S Labelling Machines S2/ZPrinterLinx inkjet coderThe 0.33L can format makes this equipment suitable for producers requiring a compact beverage production solution for standard beer cans. The modular arrangement also supports practical connection to can conveyors, accumulation sections and downstream industrial packaging operations.Machine Condition & Maintenance HistoryThe line is used and fully reconditioned, providing a prepared second hand canning solution for operation. Its reconditioned condition is particularly relevant for buyers seeking established beverage production equipment with the core filling, labeling and coding functions supplied as one line.Operational Performance & VersatilityThe atmospheric filler is intended for beer in cans and is specifically identified as a non-counter-pressure filling system. The line incorporates an empty-can depalletizer/elevator, a Cask Brewing Systems filler, a Linx inkjet coder and an S2S Labelling... Nwjdpfxsz E Dhko Ab Usl

Condition: used, machine/vehicle number: LC680, Used KRONES Gera Returnable Glass Bottling Line, 20000 BPHTechnical Specifications & Performance DataThis used bottling line is a complete returnable glass bottling line designed for handling bottles in crates, covering the process from crate preparation through filling, labeling, inspection, crate packing and palletizing. The line combines equipment from Krones, Kettner, Rink, Syscona, Matec, Falterbaum and Bohrer.Filler capacity: 20,000 bphFilling type: isobaric filling (counter-pressure) - ( Heineken-style)Premix capacity: 22,000 L/hContainer formats: 0.33L and 0.75L returnable glass bottlesPackaging configuration: bottles in cratesClosure type: plastic screw caps Labeling technology: wet-glue labeling with 2 aggregatesMain equipment years: 1996–2016Advanced Automation & Control SystemsThe line includes automated systems for crate sorting, crate decapping, bottle unloading, washing, bottle inspection, closure inspection and finished-bottle quality control. The Krones Linatronic empty bottle inspector, Syscona Expert FHK closure inspection system and Krones Checkmat inspection equipment support controlled handling and verification throughout the returnable bottle process.Automated crate handling and inspection equipment can help reduce manual intervention while supporting repeatable product flow between washing, filling, labeling and repacking stages.Production Line Integration CapabilitiesThis complete bottling line is configured for returnable glass bottle production in reusable crates. Its process layout supports the preparation of returned containers, removal of existing closures, bottle and crate washing, empty-bottle inspection, filling and screw capping, wet-glue labeling, final inspection, crate packing and palletizing.Machine typeManufacturer / modelYearDecraterKettner Robot Junior RA3/C-T1996Decapping MachineRINK KM 690/4K2012Bottle WasherGM GERA ARCADE GEL32005InspectorKrones Linatronic2014Various EquipmentSyscona Expert KSA2014Various EquipmentBohrer R 302011Filling Monoblock Nwsdpoz E Dhdefx Ab Uol