Kitsopoulos Wood Company

Condition: used, SICAR thickness planer Nwjdpfxszha I Uj Alhoh Planing width: 500mm, 4 traditional knives, i.e., wedge-type knives. 2 feed speeds for the thickness planer, Mechanical adjustment of the thickness planer table, Max. planing thickness: 230mm, Length of planer bed: 202cm, with extension to 240cm, Adjustable planer fence, 4KW motor.

Condition: good (used), Year of construction: 1994, Working width 500 mm Nedpfx Aszfqknelhswh Working height 240 mm Motor output 4,0 kW Length of the planing table 2470 mm Number of knives 4 St. Feed speed 7/14 m/min. machine weight ab. 1050 kg

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Nwedpfx Alozfpybohsh Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2003, equipped with Tersa cutterblock and electric height adjustment, tables measured with top precision max. 1/10 mm completely set up used top condition cleaned functionally tested partially refurbished Manufacturer: SCM Type: FS 410 Year of manufacture: 2003 Machine no.: 159435 CE type-tested GS dust-tested Number of cutters: 3 Feed rate m/min: 6 + 12 Bridge guard Slotted table lips Low-noise table lips Motorized automatic brake Tersa cutter system Rubber draw roller Digital display for planing height Electric height adjustment with fine adjustment Extraction hood integrated Motor kW: 5.5 Planing width approx. mm: 410 Planing height approx. mm: 240 Table length approx. mm: 2100 New price approx. €: 7500.00 Extraction connection mm: 100 Nwjdpfezd Hdnox Alhoh Space requirement approx. L x W x H mm: 2100x900x1300 Weight approx. kg: 710 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, with segmented infeed roller and segmented pressure bar Tables with top accuracy of 0.0 – max. 1/10 mm Bridge-type, single-sided reversible knife system completely adjusted Nodpfxjzd Hc Re Alhswh used good condition cleaned functionally tested partially refurbished Manufacturer: Kölle Type: HK63 Machine no.: 1409 Number of knives: 2 Feed rate m/min: 2 speeds Jointing strip Table guide rollers Segmented pressure bar Segmented infeed roller Integrated dust extraction hood Planing width approx. mm: 630 Planing height approx. mm: 220 Table length approx. mm: 2100 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 2200 x 1300 x 1400 Weight approx. kg: 1200 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1994, from an authority Centro-Fix cutterhead rubber extension completely adjusted Nodszd Hcqepfx Alhswh used in top condition cleaned functionally tested partially refurbished Manufacturer: Panhans Type: 445-A Year of manufacture: 1994 Machine no.: 410 GS-tested for wood dust Number of cutters: 4 Feed rate m/min: 7 + 14 Auxiliary stop Table lips with slots Table lips with low noise motorized automatic brake Centrofix reversible cutters Table guide rollers Articulated pressure bar Rubber extension roller Digital display for planing height Electric height adjustment with tip fine adjustment Handwheel fine adjustment Extraction hood integrated Motor kW: approx. 5.5 Planing width approx. mm: 510 Planing height approx. mm: 200 Table length approx. mm: 2250 Extraction port mm: 160 Space requirement approx. L x W x H mm: 2300 x 1050 x 1400 Weight approx. kg: 1000 Total connected load approx. kW: approx. 5.5 Location: 97447 Gerolzhofen, free loading, unpacked Transfer in current condition as inspected, without warranty and guarantee

Condition: used, Working width: 600 mm Planer head: Strip knives Number of knives: 2 Jointer table length: 1900 mm Adjustable angle of the jointer fence: yes Folding up of the jointer table: manual Maximum feed thickness, thickness planer: 220 mm Height adjustment of the thickness table: handwheel Display of the planing thickness: scale Feed speed: continuously variable Infeed roller: steel Outfeed roller: steel Pressure bar: continuous Table rollers: yes Motor power: 4 kW Motor brake: no Dust extraction connection: 160 mm Machine length: 2000 mm Machine width: 1250 mm Njdpfxozdzade Alhowh Weight: 1200

Condition: used, Year of construction: 1993, Working width: 410 mm Jointer cutterhead: Tersa Number of knives: 3 Jointer bed length: 2000 mm Concave/convex fence adjustment: no Nwjdpszdzakjfx Alhsh Adjustable angle of the jointer fence: yes Raising the jointer bed: manual Maximum feed thickness, thickness planer: 240 mm Height adjustment of the thickness table: electric Indication of planing thickness: mechanical counter display Feed rate: 6/12 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: continuous Table rollers: no Motor power: 5 kW Motor brake: yes, automatic Dust extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 450

Condition: excellent (used), functionality: fully functional, For sale is a high-quality Holzkraft Minimax T45C table router from SCM. The machine is in very good condition and comes from a workshop setting. Equipped with a large precision router table, sliding carriage, extensive router fence, safety guards, and a feed mechanism, the machine is ideal for professional routing work in furniture, window, door, and interior design applications. The robust industrial design and proven SCM technology ensure precise working results and a long service life. Technical data: Manufacturer: SCM / Holzkraft Model: Minimax T45C Machine type: Table router Design: Industrial quality Router table made of cast iron Router fence with fine adjustment Emergency stop switch Dust extraction connections available CE version Three-phase machine (400 V) Equipment: Router fence, complete Router guard Clamping device Dust extraction port Emergency stop system Various accessories as shown in the images Roller support / material support Condition: Very well-maintained overall condition Clean guides and table surfaces Complete fence and safety devices Ready for immediate use Scope of delivery: Holzkraft Minimax T 45C Router fence Safety guards Clamping device Accessories as shown in the photos Special features: High-quality machine from SCM Robust industrial design Ideal for window, door, and furniture construction Nwjdpfxozdudcs Alhjh High repeatability Transport possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes reserved. All information without guarantee.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Holzkraft / SCM Minimax FS 41e Jointer and Thicknesser The machine was manufactured in 2017 and is in exceptionally well-maintained condition. The solid cast iron tables are clean and show only minor signs of wear. Equipped with the proven Tersa cutterhead, the machine allows for quick blade changes and excellent planing results. The FS 41e is an ideal solution for carpentry shops, joineries, interior fitters, and demanding craft businesses that value precision and reliability. Technical data Manufacturer: SCM / Holzkraft Nodpszdtp Rjfx Alhjwh Model: Minimax FS 41e Year of manufacture: 2017 Machine number: available Planing width: 410 mm Jointer and thicknesser Tersa quick-change cutterhead Voltage: 400 V Frequency: 50 Hz Three-phase connection CE-compliant design Max. blade thickness: 16 mm Equipment Tersa cutterhead system Solid fence Large, precision cast iron tables Central thickness adjustment Digital thickness display Dust extraction connection Emergency stop switch Robust industrial design Very smooth and quiet operation Condition Very well-maintained overall condition Year of manufacture 2017 Cast iron tables in very good condition Tersa cutterhead without any visible damage Immediately ready for use Scope of delivery Holzkraft Minimax FS 41e Fence Tersa cutterhead Protective and operating devices as shown in the images Special features High-quality machine from SCM Professional design for daily workshop use Quick blade changes thanks to the Tersa system High surface quality when planing Space-saving combination of jointer and thicknesser Shipping possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, intermediate sales and changes reserved. All information without guarantee.

Condition: excellent (used), Year of construction: 2016, operating hours: 266 h, Combined planing and thicknessing machine from Hofmann with a 4-knife Tersa cutterhead, very robust machine construction in a compact design. A special feature of this machine: The planing table does not need to be folded up for thicknessing, so no conversion is necessary. Planing width approx. 500 mm Thicknessing table electrically adjustable with digital display Rubber-coated feed roller, new Rubber-coated outfeed roller, new Planing height approx. 4 - 245 mm 2 feed speeds, 7 + 14 m/min Table length 2400 mm Drive motor 7.5 kW with automatic motor brake and soft start device 4-knife cutterhead with new Tersa reversible knives Slotted table lips Cutterhead guard TX-GL Fence swiveling with a guide strip Concave/convex edge setting of the planing tables Rod for hanging the dust extraction hood Dust extraction port 2 x 160 mm Emergency stop switch Original paint, only a few spots have been touched up V-belt renewed Tersa knives renewed Rubber rollers renewed Operating manual CE marking Machine from a small company in top condition, ready for immediate use, operating hours recorded: 266 hours. No scratches on the tables. Nwjdpfozdk T Hsx Alhoh Dimensions approx. 2400 x 1200 x 1200 mm (LxWxH). Weight approx. 1400 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Catalogue number: 7265 TECHNICAL DATA SURFACE PLANER: - Shaft width: 510 mm - Noise-reducing comb - Shaft guard Nsdpfxozcvh Io Alhjwh - Original cast iron tilting fence - Table length: 2060 mm - Both infeed and outfeed tables adjustable - Extraction port diameter: 150 mm THICKNESSER: - Maximum workpiece thickness: 200 mm - Thicknesser shaft guard - Electric height adjustment for planing depth From above: - Anti-kickback fingers - Serrated infeed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth outfeed roller From below: - 2 adjustable rollers on lower table - 2 feed speeds: 7 / 14 m/min - Extraction port diameter: 150 mm - Brake - Main motor: 4 kW - Dimensions (LxWxH): 2200 x 1400 x 1050 mm - Weight: 1055 kg ADVANTAGES – Made in Germany – Brake – Noise-reducing comb – Electric planing height adjustment – Not repainted – Very good condition, used machine Original photos Start-up video: youtube.com/watch?v=7_aygbppcsY Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with greater fluctuations)

Condition: excellent (used), FELDER AD941 Planer-Thicknesser – used Nwedpfezcfp Uox Alhjh Co-opening planer tables, Table opening to the rear, Electric height adjustment, Digital display for planing thickness, Dust-proof ----- Technical data ----- Planing width: 410 mm, Table length: 2,200 mm, Max. chip removal: 5 mm, Diameter of planing shaft: 86 mm, Number of knives: 4 pieces, Swivel range of planing fence: 90-45°, Passage height: 245 mm, Min. workpiece thickness: 3 mm, Feed speed: 6 and 12 m/min, Dust extraction port: 120 mm, Motor power: 5.5 kW, Weight: 610 kg Quality information: - Planer tables adjusted - Infeed and outfeed rollers checked and adjusted - Table guides checked / readjusted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: good (used), EMA – Planer/Thicknessing machine Nwodpfozcc N Eex Alheh Working width: 500 mm Length of planing table: 2,200 mm 4 knives in the cutterblock

Condition: used, Used machine Jointer: Working width: 500 mm Total table length: 2200 mm 4-knife cutterhead with segmented planer knives Motor: 4 kW Thickness planer: Min. working height: 3 mm Max. working height: 235 mm Njdpfx Asza I Tkolhswh Max. chip removal: 8 mm Digital height adjustment display with decimal readout Feed speed: 7.5/15 m/min Availability: short-term Storage location: Flörsheim

Condition: excellent (used), TEST MACHINE For sale is a like-new Record Power PT310 surface planer/thicknesser with a planing width of 310 mm. The machine has been refurbished by our service team and is in very good condition. Technical data: - Spiral cutterblock - Planing width 310 mm - Planing length 1420 mm - Max. feed height 230 mm - Dust extraction port Ø 100 mm - Motor power 2.2 kW / 3 HP - Incl. feed mechanism - Year of manufacture 2025 - like new The planer/thicknesser is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: surface planer, thicknesser, planer, surfacing, thicknessing Nedpfx Aey U Inlelhjwh Reference: R-A0117

Condition: excellent (used), Catalogue number 6309 TECHNICAL SPECIFICATIONS SURFACE PLANER: - shaft width: 510 mm - 3-knife cutterblock - adjustable tilting fence - table length: 1910 mm - both tables adjustable THICKNESSER: - max thickness of processed element: 200 mm - thicknesser cutterblock guard from above: - anti-kickback fingers Njdpey Uw Uhsfx Alhowh - geared feed roller - planing cutterblock - smooth outfeed roller - stepless feed speed adjustment: 7–14 m/min - main motor approx. 4 kW - cutterblock speed: 3000/6000 rpm - dimensions (LxWxH): 1910x870x970 mm - weight: 780 kg – Italian manufacture – Very good condition, used machine Net price: PLN 14,500 Net price: EUR 3,450 Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of major exchange rate fluctuations)

Condition: excellent (used), Combi 500 Combination Planer and Thicknesser Nwedpfxoy Tucts Alhsh - 2-knife cutterblock - Aigner auxiliary fence - Table length: 1800mm - 2 dust extraction ports - Feed motor with 2 speeds

Condition: used, Surface planer: Working width: 520 mm, Table length: 2200 mm, Spindle diameter: 120 mm, Number of knives: 4 pcs. Thickness planer: Table dimensions: 520 x 850 mm, Feed rate: 6.5 - 17 m/min. Location: Supplier. Nwsdpfx Ajy Tpzqslhsh

Condition: used, Used machine Equipment and technical specifications: Nwodpfx Ajy R E U Ijlheh - 4-knife planer shaft - Feed speed: 7.5/15 m/min - Surface planer: - Working width: 500 mm - Total table length: 2,200 mm - Motor: 4 kW - Thickness planer: - Minimum working height: 3 mm - Maximum working height: 235 mm - Max. depth of cut: 8 mm - Digital height adjustment display with decimal precision Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2021, functionality: fully functional, Main Features:Professional Planing: Perfect surface planing and precise thicknessing in one machine.Dual Lifting System: Comfortable, simultaneous lifting of the planer tables for a quick changeover to thicknessing.Cutterblock: Available with the proven Silent-POWER® spiral blade cutterblock for extremely quiet operation and tear-out free results.Precision: Massive cast iron planer tables and a precisely guided thicknessing table support.Technical Details (Examples):Planing width: Depending on the model (e.g., 310 mm, 410 mm, or 510 mm).Planer table length: Generously dimensioned for safe guiding of long workpieces.Thicknessing height: Infinitely adjustable, optional with electronic digital display (Power-Drive).Feed drive: Uniform workpiece feed for a perfect surface finish.Advantages:Space-saving design due to combined construction.Highest repeatability for series production.Sturdy construction "Made in Austria". Nwodpfxjy R D Nwe Alhsh

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine Nedpfxsy Ryxhe Alhewh * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Bargain from Swiss liquidation in excellent condition, 510 mm Suva guard Nwsdpfx Aoy Niwqolhsh

Condition: used, Year of construction: 2021, machine/vehicle number: MR003895, Neat, lightly used thickness planer with a planing width of 520mm. Electric adjustment of the worktable, digital readout, and pneumatically liftable jointer tables. A machine from the absolute top segment. New price of this machine approximately €20,000. The machine is equipped with the following options: - Tersa cutterblock including 1 set of knives Technical specifications: - Serial number: AB00017878 Nedpfxsy I Nzae Alhjwh

Condition: repair required (used), In good working order, after servicing Nwjdjy H Uzijpfx Alhjh