Global Business GmbH

Year of construction: 1999, condition: ready for operation (used), A lead and feed screw lathe Stanko with a 2-axis digital display Heidenhain is available. Distance between centers: 750mm, center height: 200mm, turning diameter over bed/support: 400mm/220mm, spindle bore: 45mm, spindle taper: MK6, speed: 2000rpm, chuck diameter: 200mm, tool positions: 4. Machine dimensions X/Y/Z: approx. 2300mm/1150mm/1550mm, weight: approx. 2100kg, control: 2-axis digital display Heidenhain. Including machine feet, digital display, and 2–3 tool holders. Documentation available. An on-site inspection is possible. Hnsdpfx Aajxn S T Aobou

Year of construction: 2018, condition: used, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Hjdpfx Aasxnagqjbsnu

Year of construction: 2018, condition: used, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Hsdpfx Aajxnagkjbjnu

Year of construction: 2023, condition: used, Max. workpiece diameter: approx. 200 mm, Number of spindles: 2, Number of tool stations: 12, Control unit: SIEMENS Sinumerik, 1 KUKA handheld control unit, Serial no.: 0062709, 1 chip conveyor, KNOLL 280 S-1/160, Year of manufacture: 2022, Serial no.: 1566310, Cooling unit: DELTATHERM RKV 5.5, Year of manufacture: 2022, Serial no.: 3-48097, Net weight: approx. 190 kg, Connected load: 400/460 V/50/60 Hz, 1 handling robot: KUKA Industrial Robot Cybertec-2 Series, Year of manufacture: 2022, Serial no.: 1306487, Net weight: approx. 282 kg, Payload: approx. 22 kg, 1 robot control unit: KUKA KR C5 Dualcap AC, Year of manufacture: 2022, Serial no.: 3131152, Connected load: 3 x 380-480 V, 50/60 Hz, 1 coolant filtration unit: KNOLL KF 150/950, Year of manufacture: 2022, Serial no.: 1566311, 1 air filtration unit: AFS 1100, Year of manufacture: 2021, Serial no.: 36957, Net weight: approx. 70 kg Hjdpfxsxnakvj Aabenu

Year of construction: 2022, condition: used, Travel distances (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, BENZINGER control, KNOLL 320 S-1/225 chip conveyor, No.: 2197973, HYDAC cooling unit, DSL Sigmatec 15 compressed air filter unit, 1 side table Hsdpfxoxnagwe Aabonu

Year of construction: 2019, condition: used, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Hnjdpjxnag Defx Aabju

Year of construction: 2023, condition: used, 12-position tool changer, spindle diameter: approx. 26 mm, maximum spindle speed: approx. 8,000 rpm, maximum workpiece diameter: approx. 60 mm, maximum workpiece length: approx. 120 mm, tool holder: VDI 25, SIEMENS One control system, net weight: approx. 4,200 kg, 6-axis articulated arm robot EGS AUTOMATION YR-1-06VXH12-A00, year of construction: 2022, maximum payload: approx. 12 kg, net weight: approx. 150 kg, serial number: 6V2242171720001, mounted on steel base, YASKAWA ERAS-1000-06VXH25-E10 controller, with loading and unloading station METEK/EGS AUTOMATION MSM-AUTOMATION BENZINGER, year of construction: 2023, serial number: 220452-5, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2023, serial number: 1610559, hydraulic power unit with cooling KNOLL/BKW TG30-04/07, year of construction: 2023, serial number: 1629016, BKW ET22V-134-B-DI, year of construction: 2023, serial number: 836245, 1 cooling unit HYDAC RFCS-AH030/1.0, year of construction: 2022, serial number: 3679699, compressed air unit DSL 02D-SF-GORING 2-MBL, maximum air flow: approx. 900 cbm/h, with safety enclosure defective due to vandalism (components have been removed from the control cabinet) Hnjdpjxnah Isfx Aabeu

Year of construction: 2022, condition: used, max. bar passage: approx. Ø 42 mm, max. bar length: approx. 800 mm, 12-position tool changer, tool holder: VDI 25, 1 compressed air filter unit DSL 02D-SF-Goring 2-MBL, nominal flow rate: approx. 900 m³/h, 1 cooling unit HYDAC RFCS-AH-030, year of construction: 2021, serial no.: 2300040370, 1 hydraulic unit KNOLL TG 30, year of construction: 2022, serial no.: 1570792, 1 hydraulic cooling unit BKW ET22V-134-B-DI, year of construction: 2022, serial no.: 834179, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2022, serial no.: 2204044, control: BENZINGER Hnjdpexnaifsfx Aabou

Year of construction: 2023, condition: used, Max. turning diameter: approx. 300 mm, max. spindle speed: approx. 6,000 rpm, power: approx. 26 kW, max. workpiece weight: approx. 300 kg, travel ranges: Z-axis: approx. 350 mm, X-axis: approx. 90 mm, control: SIEMENS Sinumerik 840 D SL, 1 chip conveyor BÄR & CO. GF25L42L-P63, year of manufacture: 2017, serial no.: 61170009, air filter unit IFS M 1600, year of manufacture: 2015, serial no.: 544070-1, net weight: approx. 85 kg, connected load: 400/460 V, 50/60 Hz, 0.75 kW, 1.7/1.5 A, 1 coolant filter unit BÄR & CO. SF 51, year of manufacture: 2018, serial no.: 61180006, cooling unit RKV 4.3 K, year of manufacture: 2018, serial no.: 3-36613, connected load: 400 V/50 Hz, permissible operating pressure: approx. 28 bar, tank capacity: approx. 90 l, cooling medium: water, 1 two-door steel cabinet, contents: various machine tools and consumables Hnjdjxnakiepfx Aabeu

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Hnjdexmkcaepfx Aabju

Condition: good (used), Tosch lathe Hnodpfx Aoxmic Esabsu

Year of construction: 1988, condition: good (used), TOS SN 50 B (1988) Manufacturer: TOS Model: SN 50 B Year of manufacture: 1988 Type: Universal centre lathe Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Distance between centres: 1500 mm Bed width: 300 mm Spindle bore: 52 mm Spindle speed range: 22 – 2000 rpm Spindle nose: Camlock D1-6 Spindle motor power: 7.5 kW Longitudinal feed range: 0.04 – 2.24 mm/rev Cross feed range: 0.02 – 1.12 mm/rev Metric threads: 0.5 – 224 mm Inch threads: 56 – 0.25 TPI Module threads: 0.25 – 112 mm DP threads: 112 – 0.25 DP Hnsdpsxl Tt Sefx Aabou Tailstock quill diameter: 75 mm Tailstock quill travel: 160 mm Tailstock taper: Morse 5 Machine length: approx. 2800 mm Machine width: approx. 1100 mm Machine height: approx. 1300 mm Machine weight: approx. 2000 kg

Condition: ready for operation (used), Swing diameter over bed/cross slide/offset: 630mm/340mm/700mm, center height: 290mm, distance between centers: 1500mm, speed: 1120rpm, machine dimensions X/Y/Z: approx. 3600mm/1500mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible. Hnodpfx Aoxliufoabsu

Year of construction: 2004, condition: good (used), We are offering a Doosan Puma 2000 LSY with bar feeder: - Year 2004, 9,400 operating hours - Fanuc 18i-TB - LNS Servo 2 bar feeder - Tool measurement system - Chip conveyor - 12 tool stations - x, y, x, b = 250, ±50, 830, 830 Hnedpsxk Uz Iefx Aabsu Under power

Condition: ready for operation (used), Demoor Ø 540 x 2000 mm Distance between centers: 2000 mm Hnjdpfsxg Uf Eex Aabeu Swing over bed: 540 mm Diametre of main spindle bore: 60 mm

Condition: ready for operation (used), additional equipment features: yes, Weisser Heilbronn Goliath Ø 460 x 1500 mm Distance between centers: 1500 mm Swing over bed: 460 mm Swing over cross-slide: 260 mm Hsdpoxg Ufxofx Aabsnu Diametre of main spindle bore: 82 mm Number of speeds: 7,1 > 1400 rpm

Condition: ready for operation (used), Mondial Ø 520 x 2000 mm Distance between centers: 2000 mm Swing over bed: 520 mm Swing over cross-slide: 290 mm Diametre of main spindle bore: 57,5 mm Hnodoxg Ufropfx Aabeu Number of speeds: 33 > 2000 rpm Digital screen: yes

Condition: ready for operation (used), with conical ruler Distance between centers: 2000 mm Swing over bed: 575 mm Swing over cross-slide: 350 mm Diametre of main spindle bore: 53 mm Hnsdpfx Aexg Ufleabsu Power on main spindle: 7,5 kW Number of speeds: 40 > 2376 rpm

Condition: ready for operation (used), empty load weight: 815 kg, total length: 1,900 mm, total width: 730 mm, total height: 1,500 mm, Mondial Celtic 14 Ø 370 x 750 mm Distance between centers: 750 mm Swing over bed: 370 mm Swing over cross-slide: 200 mm Hedjxg Uffopfx Aabsnu Diametre of main spindle bore: 35 mm Power on main spindle: 2,2 kW Number of speeds: 24 > 1000 rpm

Condition: ready for operation (used), empty load weight: 815 kg, total length: 1,900 mm, total width: 730 mm, total height: 1,500 mm, Mondial Celtic 14 Ø 370 x 750 mm Distance between centers: 750 mm Swing over bed: 370 mm Swing over cross-slide: 200 mm Hnsdpfx Aasxg Ud Isbou Diametre of main spindle bore: 35 mm Power on main spindle: 2,2 kW Number of speeds: 24

Condition: ready for operation (used), empty load weight: 3,150 kg, Fat Tur Ø 630 x 1500 mm Distance between centers: 1500 mm Hnsdpfx Aexg Udzeabsu Swing over bed: 630 mm Swing over cross-slide: 315 mm Diametre of main spindle bore: 90 mm Number of speeds: 1800 rpm

Condition: ready for operation (used), Type: Gallic 20 Distance between centers: 2000 mm Swing over bed: 520 mm Hnedpfx Aaexg Ugcsbju Swing over cross-slide: 290 mm Diametre of main spindle bore: 57,5 mm Number of speeds: 33 > 2000 rpm Digital screen: yes

Condition: ready for operation (used), empty load weight: 5,600 kg, total length: 4,170 mm, additional equipment features: yes, 3 chucks + claws 1 steadie Distance between centers: 2000 mm Swing over bed: 655 mm Swing over cross-slide: 390 mm Diametre of main spindle bore: 82 mm Hedpfexg Ugijx Aabjnu Power on main spindle: 18,5 kW Number of speeds: 9 > 1120 rpm

Condition: ready for operation (used), empty load weight: 5,000 kg, Sculfort Maxicap Ø 840 x 3000 mm Distance between centers: 3000 mm Swing over bed: 840 mm Hnodpexg Uhgjfx Aabsu Swing over cross-slide: 600 mm Swing in gap: 1180 mm Diametre of main spindle bore: 80 mm Power on main spindle: 12,5 kW Number of speeds: 8 > 640 rpm

Condition: ready for operation (used), empty load weight: 6,000 kg, total length: 4,800 mm, total width: 1,390 mm, total height: 1,350 mm, without endpoint power on big small slide Distance between centers: 1500 mm Swing over bed: 690 mm Swing over cross-slide: 415 mm Swing in gap: 910 mm Diametre of main spindle bore: 82 mm Hnjdpfx Ajxg Uh Hjabou Power on main spindle: 25 PK Number of speeds: 7,1->1400rpm Total power needed: 15 kW Chuck (3/4 pinch) -- diametre: 630 mm