ABLE Maschinenvertrieb GmbH

Year of construction: 2021, operating hours: 4,421 h, condition: ready for operation (used), controller manufacturer: FANUC, This FANUC ROBOSHOT S 100 iA was manufactured in 2021. It features a screw diameter of Ø 26 / 32 mm, a clamping force of 100 tons, and tiebar spacing of 460 x 410 mm. If you are looking to get high-quality injection molding capabilities, consider the FANUC ROBOSHOT S 100 iA machine we have for sale. Contact us for more information. Pgodpfx Aaeyfw Eao Dsg

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Pgsdpfxjyfw D Ns Aa Dog Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: used, total width: 1,300 mm, total length: 2,600 mm, total height: 2,000 mm, overall weight: 2,800 kg, pressing force: 65 t, opening width: 300 mm, cylinder diameter: 80 mm, transport width: 1,300 mm, space requirement width: 1,300 mm, space requirement length: 2,600 mm, transport height: 2,000 mm, transport length: 2,600 mm, space requirement height: 2,000 mm, empty load weight: 2,800 kg, plate width: 1,100 mm, table width: 1,100 mm, table length: 2,200 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Pgjdpeyfw D Ajfx Aa Djg Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2017, Measuring range Z 420 mm Measuring range D 420 mm tool taper SK 50 weight approx. 215 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Psdpfoyfw Dpsx Aa Degg Prior sale is reserved.

Condition: excellent (used), functionality: fully functional, VDI40 Toolholder for External Turning Operations. The toolholders have been inspected and are in very good, almost as-new condition, offering high quality from various renowned manufacturers. The following prices apply with a minimum order quantity of 4 pieces: Order No.: 435_C1 – Stock: 2 pcs; Price: €55.00/piece Order No.: 430_C2 – Stock: 3 pcs; Price: €54.00/piece Order No.: 432_B4 – Stock: 2 pcs; Price: €55.00/piece Order No.: 433_B4 – Stock: 2 pcs; Price: €56.00/piece Individual price per unit: €65.00 net B3 = right-hand rotation; B4 = left-hand rotation C1 = right-hand rotation; C2 = left-hand rotation ----- Short reverse-type VDI radial toolholder. Toolholder for mounting external turning tools in the standard position, i.e., with carbide inserts facing upwards: C1 for right-hand rotation; C2 for left-hand rotation Shipping costs: on request ----- Dimensions: D = 83 mm d-2 = 83/40 mm (45.52) H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = ----- Pjdpfxoyfw Dio Aa Degg Further VDI40 toolholders available in our other offers, e.g., VDI40 Form E2 for drilling tools with cylindrical shank, with internal and external coolant supply, surfaces hardened, blackened and ground.

Condition: used, Year of construction: 2016, x-travel 1270 mm y-travel 508 mm z-travel 635 mm Pedpeyfw Dcjfx Aa Dsgg control Haas

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM Podpfxsyfwz Ij Aa Degg THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 / 23 mm throat 320 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 550 mm weight 480 kg dimensions 750 x 900 x 1900 mm Equipment: - Multi-spindle head, drill Ø 23 mm - automatic feed Psdpfoyfwzusx Aa Djgg - coolant device - infinitely variable speed - adjustable drilling depth stop

Condition: used, Year of construction: 2021, width of the strips 150 mm Pgsdpfx Aaeyfwznj Dsg band length 2000 mm band speed 45 m/s total power requirement 4 kW weight of the machine ca. 275 kg dimensions of the machine ca. 1450 x 1260 x 900 mm The AL150HS is a 2-in-1 machine: Belt sander and pipe grinder at the same time. Technical data: - Adjustable sanding angle: 20° - 90° - Grinding diameter: 20.0 / 114.3 mm

Condition: used, Year of construction: 2000, pressure 230 t chamfer lenght 5000 mm distance between columns 4050 mm 800 mm 500 mm 300 mm 600 mm BC 45 Grafik 18,7 kW 22,0 t 6,0 x 2,2 x 3,75 m - 4 stop fingers Pjdpfx Aasyfwzhe Degg - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 32 mm arm length 950 mm Pgjdjyfwzbjpfx Aa Dsg turning speed range 51 - 1000 U/min turning speeds steps 12 bore spindles - Morse Taper MK 4 quill stroke 160 mm feed range 0,075 x 0,3 mm/min table surface area 1200 x 510 mm total power requirement 2 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,8 x 1,2 x 2,25 m High-speed radial end mill with - Thread cutting attachment - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device - Documentation Machine-No. 445

Condition: used, bore capacity in steel (diameter) 25 mm Pjdpfxsyfwy Ro Aa Dogg throat 220 mm bore stroke 110 mm taper MK 3 MK table-size 350 rund mm turning speeds 100 - 2080 U/min connected load frequency 400 V total power requirement 0,9 KW weight of the machine ca. 0,2 t dimensions 0,8 x 0,6 x 1,9 m

Condition: used, Year of construction: 2015, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t Pgodpsyfwy Dsfx Aa Deg dimensions of the machine ca. 0,58x0,58x0,58 m Mobile extraction system for one workplace, IFA-tested

Condition: new, Year of construction: 2026, pressure 100 t throat 300 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm Pjdeyfwywjpfx Aa Dogg working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, x-travel 850 mm y-travel 300 mm z-travel 450 mm table-size 1100 x 250 mm control konventionell tool adaptor SK40 turning speed range 35,5 - 1800 U/min total power requirement 5,0 kW weight of the machine ca. 1,25 t dimensions 1,8 x 1,7 x 1,8 m Features: - Heidenhain digital readout - Infinitely variable feed and spindle speed - Coolant system Pgjdpfeyfwyqsx Aa Dog - Chip guard - Hydraulic vise - Good condition - SK40 tool holders and accessories (see pictures)

Condition: used, Year of construction: 1975, turning diameter over bed 820 mm turning diameter over slide rest 575 mm turning length 3300 mm centre height 410 mm spindle bore 125 mm spindle turning speed range 7,1 - 1400 U/min total power requirement 22,0 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,3 x 1,6 x 2,0 mm Lathes with: - Digital readout - Rapid traverse Pgjdpfxeyfwyko Aa Djg - Röhm 3-jaw chuck 315mm - 4-position tool post - 2 steady rests - Coolant system - Emergency stop device - Machine light - Chuck guard - 2 chip trays - Spare jaws (internal and external)

Condition: new, weight max. 20 t workpiece diameter 1500 - 3500 mm drum diameter 250 x 100 mm feed 100 - 1400 mm/min total power requirement 0,75 kW weight of the machine ca. 2,5 t Dimensions (LxWxH) 2,5 x 1,5 x 1,5 m Roller stand - Self-aligning - Forward/reverse rotation - New control system Pgjdjyfwydjpfx Aa Djg - Foot pedal - Emergency stop device

Condition: used, Year of construction: 1973, grinding length 600 mm grinding width 250 mm workpiece height 500 mm table surface area 600 x 200 mm Pgedjyfwx Topfx Aa Djg dimensions of grinding wheel 220 mm table height over floor 1000 mm grinding spindle speed 1400 / 2800 U/min total power requirement 2,0 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,4 x 1,2 x 1,9 m

Condition: used, turning diameter over bed 600 mm turning diameter over slide rest 410 mm Pgsdpfx Ajyfwx Hoa Dog turning length 2200 mm centre height 300 mm 800 mm spindle bore 62 mm spindle turning speed range 18 - 1800 U/min total power requirement 7,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 1,4 x 1,7 mm Lathe with: - 4-position tool post - Röhm 3-jaw chuck 315mm - Coolant system - Chuck guard - Chip tray

Condition: used, Year of construction: 1980, turning diameter over bed 520 mm turning diameter over slide rest 300 mm turning length 1100 mm centre height 260 mm spindle bore 62 mm spindle turning speed range 18 - 900 U/min total power requirement 11,0 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 3,2 x 1,4 x 1,4 mm Lathes with: Pgedjyfwxyopfx Aa Dsg - Forkardt 3-jaw chuck F250 - Multifix tool post - Coolant system - Center drill - Emergency stop device - Machine light - Chip tray - Machine feet

Condition: new, Year of construction: 2026, pressure 150 t throat 400 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons Psdpfoyfwxtex Aa Dsgg - CE marking

Condition: new, length 2000 mm width 700 mm Pgedpfoyfwxmsx Aa Dsg height over floor 900 mm weight 0,16 t

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) Pedjyfwxgspfx Aa Degg ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, saw blade diameter 450 mm capacity 90 degrees: round 130 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 210 x 170 mm capacity 45 degrees: square 145 x 170 mm turning speeds 2900 U/min Pgedpfx Aasyfwxae Dsg total power requirement 2,3 kW weight of the machine ca. 600 Kg dimensions 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue!!

Condition: used, Year of construction: 2011, operating hours: 64 h, functionality: fully functional, Water chiller, MTA, 88.3 kW, model Tae Evo 301, 380III, weight: 775 kg. Inspected equipment, fully charged with refrigerant gas. VAT not included. Shipping throughout Spain and Europe. Shipping costs not included. Reference: 1148. Applications: plastics processing, air conditioning, automotive, pharmaceutical chemistry, food industry, laser, machine tools, oenology, etc. Tested – condition can be verified at our facilities. 2 units available. Pgodpfx Asyfww Nja Dog