Siegmund Pietras GmbH

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, turning diameter: 1,500 mm, turning length: 500 mm, faceplate diameter: 1,000 mm, spindle motor power: 2,000 W, total height: 2,000 mm, total length: 2,700 mm, total width: 2,700 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 220 rpm, travel distance Z-axis: 500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine in very good condition. MULTIFIX D1 tool holder with 4 tool cassettes. Drive system upgraded in 2001 to a 20 kW POSIDRIVE frequency converter. Infinitely variable speed up to 220 rpm. Ppjdpjydvinofx Afhjl

Condition: used, Year of construction: 1980, faceplate diameter 2000 mm turning diameter over plate 2200 mm travel -x axis 1700 mm travel -z axis 400 (+550) mm faceplate turning speed range -stepless- 0,28- 160 U/min centre height over plate 1140 mm Ppedpfx Aeydqpcefhol diameter of main spindle 285 mm spindle bore 100 mm Control S 840 D max. workpiece weight 5000 kg max. torque on the faceplate 25000 Nm total power requirement 75 kW weight of the machine ca. 21 t dimensions of the machine ca. 6 x 3,5 x 3 m Machine was reconditioned and modernized in 2015 with Siemens 840 D CNC control. Originaly it was built in 1980.

Condition: used, Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, We offer a used face turning lathe PORĘBA TR-100C in good technical, fully working condition. Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm Ppedpfoydpvzex Afhsl height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants

Condition: excellent (used), Details Faceplate diameter: 3500 mm Working area: Ø 4000 mm Centre distance: Spindle bore: 150 mm Revolutions per minute: 1.4 ... 71 rpm Max. torque on the spindle: 6300 kpm / approx. 61,781 Nm kpm / Nm Pjdsyaa Dbepfx Afhopl Feed range, cross + longitudinal: 0.355 ... 31.5 / 14 steps / R20/3 mm/min Rapid traverse speed: 2.0 m/min Tailstock quill taper MT: Size 100 Tailstock travel: 400 mm Max. workpiece weight between centres: 20,000 kg Max. workpiece weight without tailstock: 8,000 kg Main drive motor: 34 kW Weight of machine approx.: 34.1 t Space requirements approx. LxWxH: 4.0 x 4.7 x 2.72 m Description: Tailstock

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter: 1,600 mm, turning length: 600 mm, feed length Z-axis: 600 mm, spindle motor power: 20 W, spindle speed (min.): 103 rpm, NEW CNC Lathe for flange . Ppedex Hq D Hepfx Afhsl CNC control GSK 980TD Diameter 1600mm Z-500mm Automatic Tools 4 position 13-103 RPM Price 25 000 Euro CIF Europe

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, travel distance X-axis: 1,700 mm, travel distance Y-axis: 400 mm, controller model: Siemens 840 D, No reserve price – guaranteed sale to the highest bidder! The machine underwent a full overhaul in 2015 and was retrofitted with a Siemens 840 D CNC control system! TECHNICAL DETAILS Faceplate diameter: 2,000 mm Turning diameter over table: 2,200 mm Pjdsx Db S Tjpfx Afhepl X-axis travel: 1,700 mm Z-axis travel: 400 (+550) mm Stepless faceplate speed range: 0.28–160 rpm Center height over table: 1,140 mm Main spindle diameter: 285 mm Spindle bore: 100 mm Torque at faceplate: 25,000 Nm Max. workpiece weight: 5,000 kg MACHINE DETAILS Control: Siemens 840 D Total power requirement: 75 kW Dimensions & Weight Space required: approx. 6 x 3.5 x 3 m Machine weight: approx. 21 t

Condition: ready for operation (used), functionality: fully functional, turning length: 3,000 mm, turning diameter over cross slide: 600 mm, spindle speed (max.): 600 rpm, swing diameter over bed slide: 1,200 mm, center height: 600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing diameter over cross slide: 600 mm Turning length: 3,000 mm Swing diameter over bed slide: 1,200 mm Center height: 600 mm Spindle speed: 20 – 600 rpm Faceplate diameter: approx. 1,500 mm Control system manufacturer: FAGOR MACHINE DETAILS Overall height: 2,500 mm Overall length: 6,000 mm Overall width: 2,500 mm Podowvi Txopfx Afhspl Total weight: 10,000 kg EQUIPMENT - General overhaul by KLAAßEN in 1999 - Faceplate (included): Ø 1,200 mm - With tailstock and boring bar holder

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Pjdpfx Ajwtrz Hofhepl Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Ppedpfx Ajwtctyofhel Control panel Cooling unit for Rittal electric cabinet *

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 4760, turning diameter over cross slide: 500 mm, feed length X-axis: 740 mm, feed length Z-axis: 450 mm, spindle bore: 130 mm, spindle speed (max.): 710 rpm, spindle speed (min.): 1 rpm, TECHNICAL DETAILS Spindle mount according to DIN 55027: size 15 Spindle bore: 130 mm Spindle diameter in the front bearing: 220 mm Main drive Drive power (100/60% ED): 38/46 kW Speed I: 1 - 250 rpm Max. torque: 6,000 Nm Performance data of the X-axis Travel path X: 740 mm Podpfsv Rcl Sex Afhjpl Feed force: 14 kN Speed: 8 m/min Performance data of the Z-axis Travel path Z: 450 mm Feed force: 18 kN Speed: 8 m/min Working area Chest opening: 650 mm Swing diameter of the cheek opening: 1,400 mm Swing diameter of the face slide: 500 mm Turning tool cross-section: 32 mm x 32 mm Workpiece mass faceplate: 21 t Center of gravity distance: 250 mm MACHINE DETAILS Machine weight: 7.4 t Dimensions (L x W x H): 3.7 m x 2.5 m x 2.1 m Electrical data Voltage: 400 V Frequency: 50 Hz

Condition: used, Year of construction: 1975, Technical details: faceplate diameter: 3150 mm working area: Ø 4000 mm centre distance: 8000 mm center height: 2240 mm spindle bore: 100 mm revolution per minute: 1,4 ... 71 U/min max. torque on the spindle: 6300 kpm / ca. 61.781 Nm kpm / Nm feed range: plan+längs: 0,355 ... 31,5 / 14 step / R20/3 mm/min rapid traverse speed: 2,0 m/min tailstock quill taper MT: Größe 100 tailstock travel: 400 mm max. workpiece weight between centres: 20.000 kg max. workpiece weight -without tailstock: 8.000 kg main drive motor: 34 kW weight of the machine ca.: 44,1 t space requirements approx. LxWxH: 8,0 x 4,7 x 2,72 m Delivery consists of the following components: Headstock with faceplate and main drive 2x support Tailstock Plate fields (3x3.0 meters in a row and 4 additional plate fields) 1x steady rest Ø approx. 350mm 1x steady rest Ø approx. 650mm Support travel (large) X=550mm and X0=220mm / Z=2600mm and Z0=400mm Support travel (small) X=170mm and Z=340mm i.D. Pjdpevbhiqsfx Afhopl *

Condition: used, Technical details: faceplate diameter: 1500 mm center height: über Fundament: 1250 mm revolution per minute: 2,1 ... 96 / 12 step U/min feed min/max: 0,3 ... 2,5 / 18 step mm/min. spindle bore: Ø 82 mm tailstock adjustment - manual: quer: 55 mm tailstock quill stroke: 400 mm tailstock taper MT: 6 Pedpfx Aju Ix Sgjfhopl weight of the machine ca.: 15 t dimensions L x W x H: Spindelkasten: ca. 2,0 x 1,6 x 2,1 m dimensions L x W x H: Support: ca. 6,0 x 2,1 x 1,6 m Stand support with bed slide: -bed slide travel 4,300mm motorized -cross slide 1500mm -Cross slide 600mm -Top slide 250mm -Tool holder with clamping claw Bed guide dimensions LxW: 6000 x 1500mm 4 base plates each 6000x2050x200mm *

Condition: good (used), functionality: fully functional, Renovated in 1992. Pedpoulzpzjfx Afhepl

Condition: good (used), functionality: fully functional, Renovated in 1998. Ppjdpfoulzmgox Afhjl

Condition: used, Year of construction: 1953, turning length / mm turning diameter over plate // mm faceplate diameter / mm Podpoua Iw Tefx Afhepl Plane disc diameter: approx. 3600mm Centre height above plate: approx. 1500mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: approx. 2400mm Max. Workpiece weight: 22000kg Max. Torque on the faceplate: 5000 mkg Faceplate gear rim pitch circle diameter: 1900mm Main spindle bore: 120mm Speed range normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Total power: 38kW Total weight: approx. 42.5 tonnes

Condition: good (used), Year of construction: 1968, functionality: unexamined, turning diameter: 1,500 mm, For sale: 1 used head lathe / facing lathe Manufacturer: Heyligenstaedt GmbH Werkzeugmaschinenfabrik type: 505ev/500 YEAR OF MANUFACTURE: 1968 Pedpfx Afjr Nzm Tshjpl Diameter face plate: 1.500mm incl. documentation The machine can be inspected in our warehouse in 09599 Freiberg.

Year of construction: 1979, condition: good (used), For sale comes: 1 piece used head lathe Ppodpfx Afsnl D U Sshsl Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Free location Saxony

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, The face turning lathe PORĘBA TR-100C has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: Pedpfx Afehyg Iyjhepl - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration