Tuwi Werkzeugmaschinen GmbH

Condition: used, Year of construction: 1994, functionality: fully functional, table length: 950 mm, table width: 650 mm, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50EL - Tool loading area 950mm L-R - Machine will be mechanically overhauled Dkjdozkk Azopfx Ag Dop - Roll feed BBV 202/120 Please contact us for a detailed quotation!

Condition: used, Year of construction: 2000, functionality: fully functional, table length: 950 mm, table width: 650 mm, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50UL - Tool loading area 950mm L-R - Machine will be mechanically overhauled - Roll feed BBV 202/120 Dedpfx Aezkkxcsg Dokp Please contact us for a detailed quotation!

Condition: used, Year of construction: 2021, Stamping Press Manufacturer: Bruderer AG, CH-9320 Frasnacht, Switzerland Type: BSTA 1600-181 Serial number / Commission: 14073 Year of manufacture: 2021 Press force: 1,600 kN (160 tons) Press control type: B2 Connected load: 99 kVA Supply voltage: 400 V / 50 Hz Pneumatic connection: 7–10 bar Clutch and brake system pressure: 4.3–5.8 bar Max. stopping time: 250 ms Total weight: 33,020 kg Dodpfx Agezil Tro Dekp Control panel: Bruderer touchscreen HMI Secondary display: Nidec / SYS PCS 100-P-C Sound-insulating enclosure (red/orange) Tool stroke counter: 11,983,110 (as displayed) UVV safety inspection by Bruderer: September 2025 – no defects found Strip Feeding Line Manufacturer: Kohler Maschinenbau GmbH, Lahr, Germany Type: BZA ABH 2000.2H – KRS 18.260/19 – BF1 Machine number: 41000 Year of manufacture: 2021 Connected load: 10 kW Supply voltage: 400 V, 50 Hz Feed type: BBV 300 Motorized decoiler with yellow safety enclosure

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Dedozil S Iepfx Ag Dokp Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Dsdpfx Aozil Sujg Djkp Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: used, Year of construction: 1994, operating hours: 28,000 h, functionality: fully functional, The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Dkedezibtbjpfx Ag Dop Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Adjustable stroke: 16–63 mm Clamping plate area: 970 mm Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

Condition: used, Year of construction: 1995, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: 10317, The BSTA 50UL is a Bruderer high-speed precision stamping press rated at 500 kN (50 tons) nominal force, engineered for continuous progressive-die production at variable stroke rates from 100 to 1,120 strokes per minute. The press is equipped with a Bruderer BBV 202/120 strip feeder, delivering strip widths up to 203 mm and handling material thicknesses up to 2 mm. Adjustable stroke is set between 16 and 51 mm, with strip inlet height adjustable across a 50–140 mm range to accommodate varying tooling and material profiles. Nominal force: 500 kN (50 tons) Tool monitoring: Unidor Stroke rate: 100–1120 strokes per minute (variable) Strip feeder: Bruderer BBV 202/120 Adjustable stroke: 16–51 mm Mounting space / clamping plate: 760–940 mm Main drive: 22 kW Power supply: 400 V / 50 Hz Table area: 940 x 580 mm Strip inlet height (adjustable): 50–140 mm Max. strip width: 203 mm Dedpfxjzibrqs Ag Dekp Max. material thickness: 2 mm Machine dimensions: 3100 x 2700 x 1800 mm Weight: approx. 8,150 kg Operating hours: 42,416 h Sound-insulating cabin available on request More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on reqest

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Nominal force: 500 kN (50 tons) Dodpfxezh Nnws Ag Dskp Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: used, Year of construction: 2001, functionality: fully functional, The Schaal SEP 80 is a 80-ton eccentric press designed for precision stamping and forming. Its Unidor electronic control system ensures repeatable stroke accuracy and fast setup, while the integrated tool safety device protects dies from damage caused by misfeeds or incorrect part positioning — reducing downtime and tooling costs. The machine features a rigid double-column O-frame in vibration-damping cast iron, 6-point play-free roller ram guidance, and a flywheel drive with pneumatic clutch/brake combination. It comes equipped with a gripper feeding device SZV 302 feed unit for automated strip feeding. Pressing force: 800 kN (80 tons) Strokes per minute: 60 – 320 min⁻¹ Ram stroke (adjustable): 8 – 80 mm Dkjdpszhw Huofx Ag Dep Ram adjustment: 80 mm Ram surface: 700 × 500 mm Table size (clamping plate): 830 × 700 mm Clamping plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed clearance: 120 ± 40 mm Feed unit: Schaal SZV 3 Strip width: 10 - 270 mm Thickness: 0 – 4 mm Drive power: 21.5 kW Weight: 8,000 kg Footprint: 1,500 × 2,000 mm, height: 2,885 mm

Condition: excellent (used), Year of construction: 2010, Helmerding Press Dkedpfx Agjzhtl To Dop Type: KDH 315/2100/2 Pressing force: 3,150 kN Stroke height: 40–200 mm Strokes per minute: 20–100 min⁻¹ Ram adjustment: 120 mm Shut height: 500 mm Table size: 2,000 x 1,200 mm Ram surface: 2,000 x 1,100 mm Machine weight: 44,000 kg Helmerding Roller Feeder Type: EWH 800/150 Strip width: 100–800 mm Strip thickness: 0.5–6.0 mm Helmerding Straightening Machine Type: R-70/800/9-S Strip width: 100–800 mm Strip thickness: 0.5–5.0 mm Roll diameter: 70 mm Number of straightening rolls: 9 pcs Helmerding Decoiler Type: HE-4/800/MOT/HYD Strip width: 100–800 mm Max. coil weight: 4,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,000–1,600 mm

Condition: like new (used), Year of construction: 2019, Mossini Transfer Press PDM/4BLD Pressing force: 2,000 kN Table area: 6,000 x 2,500 mm Slide area: 6,000 x 2,500 mm Stroke height: 900 mm Strokes per minute: 10 - 25 1/min Slide adjustment: 400 mm Overall height: 1,270 mm Dkjdpfxszhtlte Ag Dsp TOTAL STROKES: 1,000,000 strokes NORDA Transfer X-axis travel: 0 - 1,200 mm Y-axis travel: 0 - 1,125 mm Z-axis travel: 350 mm Max. transport weight: 200 kg Mill tool strip system Strip width max. up to 1,850 mm Strip thickness: 0.5 - 3.0 mm Coil load capacity: 24,000 kg

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Dkedpozg U R Iefx Ag Djp Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar

Condition: good (used), . Dsdezg Tfkspfx Ag Djkp Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: excellent (used), Here, we offer you a RIVSET riveting system. including a riveting tool 9524-640-826-7 Operating voltage: 400V 50 Hz Djdpfx Agozgaanj Djkp Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 Max. permissible riveting pressure: 250 bar Max. permissible riveting force: 78 kN Weight of the tool: approx. 195 kg Type: 9524-640-826-7 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer you a control unit. Control unit for the RIVSET riveting system. Dkedpfx Aszgaahjg Djp Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was inspected by the manufacturer and is functional. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a RIVSET riveting system. including a riveting tool Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible riveting pressure: 250 bar max. permissible riveting force: 78 kN Weight of the tool: approx. 279 kg Year of manufacture: 2012 Type: 9524-640-824-5 The system was inspected by the manufacturer and is functional. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone. Dkodpfx Aozgaabjg Dep

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Djdpfx Agezdf Uto Djkp Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2004, Kaiser Press Dksdjzcc Rpopfx Ag Djp KSTU 1600 - 15 - 3 PSR Pressing force 1,600 kN Stroke rate 20 - 260 1/min Stroke height 20 - 120 mm Ram adjustment 120 mm Table area 1,250 x 900 mm Installation height 400 mm Includes ARKU strip processing line.

Condition: excellent (used), Year of construction: 2005, Manufacturer: Helmerding Presse Press force: 5,000 kN Stroke adjustment: 97–400 mm Strokes per minute: 10–80 1/min Tool installation height: 800 mm Ram adjustment: 200 mm Ram area: 3,000 x 1,400 mm Table area: 3,000 x 1,400 mm Motor power: 90 kW Press weight: 120,000 kg Dodpfozccfmsx Ag Dekp Including transfer and coil line.

Condition: excellent (used), Year of construction: 2001, HELMERDING Press KDH 400/2600/2 Pressing force 4,000 kN Stroke rate 15-60 strokes/min Stroke adjustment 80-250 mm Slide adjustment 175 mm Installation height 550-800 mm Table area 2,500x1,600 mm Slide area 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Dkodpfxozccd Ns Ag Dsp Weight 106,000 kg Lorenz Strip Line EWH 600/150 Strip width 80-600 mm Strip thickness 0.6-6.0 mm Max. coil weight 7,500 kg

Condition: excellent (used), Year of construction: 2019, Mossini Press Press force: 4,000 kN Dkodpfx Ajzcccfsg Dop Stroke rate: 28/82 rpm Stroke height: 250 mm Ram adjustment: 350 mm Shut height: 900 mm Table size: 2,850 x 1,300 mm Millutensil Coil Line Strip width: 100–800 mm Strip thickness: 0.5–4.0 mm Coil carrying capacity: 10,000 kg

Condition: like new (used), The Kaiser RS 2 XA reproduction stand features a non-reflective, matte gray base plate. This plate has a printed grid with centimeter and inch markings. The stand also includes an anodized aluminum profile tube column with centimeter and inch markings. The column can be rotated by 180 degrees. Dkodpfx Aozbxy Rog Dop Features of the Kaiser reproduction stand RS 2 XA: • Base plate: 40 x 50 x 2.5 cm (W x D x H) • Column height: 76 cm • Load capacity: max. 1.5 kg

Condition: excellent (used), Year of construction: 1985, pressure 25 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : MABU (D) High Speed 4 Column Automatic Punching Press model 25 VP / RC year 1985 Press force nominal 25 to Punching Speeds 120 - 600 strokes/min Stroke length adjustable 7 - 62 mm Ram adjustment range 50 mm Mounting height 225 - 310 mm Table size 560 x 640 mm Distance between columns sides 320 / 340 mm Distance between columns front/back 380 / 400 mm Opening in table / clamping plate 120 x 230 mm Ram clamping plate size 240 x 280 mm MABU Strip feed RACER 11 Max. strip width 150 mm Max. feed stroke 120 mm Main drive approx. 3 kW Total drive approx. 3,5 kW - 380 V - 50 Hz Weight approx. 2.400 kg Accessories / Special Features: Dkjdpfx Agezbu Spe Dep • MABU Strip feed device model RACER 11 RCTF, mounted on the left side, stroke adjustable, infeed height adjustable, • Automatic continuous stroke and single stroke available as well as inching mode, piece counter, blow out device • Sep. control cabinet and switch cabinet, Vibration dampening machine shoes • Large, soundproof cabin (disassembled) • Various accessories, manuals and former safety test reports Condition : very good, press was regularly maintained ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of all kinds of presses available. Please let us know your requirements.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Further used machines by Mabu, Bruderer, Bihler and Schaal are available for sale from our stock. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Dodpfx Agozab Ibj Djkp Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Dkjdjy S E U Ropfx Ag Dop Bolster plate — Width × Depth: 930 × 650 mm Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Original technical documentation and schematics