Bott Industrie Co.

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 Lhjdpfxsyvqbqs Abced stator knives: 2 Drive: 7,5 kW Double diagonal cut With roller feeder, electric control unit and sound insulation box

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. Lhodpfoyvqbkjx Abcjd With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Lhedjyvqbdepfx Abcsd Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Lhsdsyvqa Tspfx Abced Open rotor 600 mm diameter x 980 mm width (optionally as open 3- or 7-blade rotor) Drive motor 110 kw Folding device with electric winch

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Meckesheim GmbH Type: SMS 45/60 Heavy-duty series Infeed opening 600 x 680 mm Drive motor 75 kW Lodpjyvqayjfx Abcehd

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Lhjdoyvqamspfx Abcsd

Condition: used, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knives: 6 Rotor knives: 9 Lhjdpfxeyvqage Abcjd

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Lhedpfx Aeyvqaaobcod Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Lhjdoyvp U Aopfx Abcjd Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width Lhodjyvp Uvepfx Abcod 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Lhjdpfx Abeyvp T Soced Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables Lsdpfx Absyvp Trocjhd With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness Lsdpfx Abeyvp S Iecjhd

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Lodpsyvp Szofx Abcohd Drive motor 75 kw

Condition: used, HERBOLD PU800 pulverizers Suitable for soft to medium-hard materials Lodpfjyvp Suox Abcjhd Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Drive motor: 90 kw

Condition: used, machine/vehicle number: 13293, Rotor diameter: 450 mm Rotor width: 1000 mm Ledpfxoyuz D Ee Abcehd Rotor knives: 9 rows Stator knives: 2 Infeed cross-section approx. Drive motor: 75 kW

Condition: used, machine/vehicle number: 14016, Rotor diameter: 530 mm Rotor width: 1000 mm Rotor knives: 4 x 2 Lodpsyuz Dxsfx Abcshd Stator knives: 2 Feed opening approx. 700 x 1000 mm Drive motor: 90 kW

Condition: used, machine/vehicle number: 14004, Rotor diameter: 300 mm Rotor width: 600 mm Lsdpfx Ajyuk Tiobcohd Rotor knives: 3 rows Stator knives: 3 rows Feed opening approx. 430 x 590 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 13396, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 rows Stator knives: 3 rows Feed opening approx. 1200 x 800 mm Drive motor: 132 kW Ljdpfxeyt Tavj Abcjhd

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Rotor knives: 3 Lhodpfeyr Tzkox Abcsd Stator knives: 2 Infeed opening approx.: 410×600 mm Drive motor: approx. 11 kW

Condition: used, machine/vehicle number: 14038, Rotor diameter: 260 mm Lodpfeyr Tzdex Abcshd Rotor width: 260 mm Rotor knives: 3 Stator knives: 2 Feed opening approx. 350×550 mm Drive motor: approx. 5 kW

Condition: used, machine/vehicle number: 14037, Rotor diameter: 260 mm Rotor width: 450 mm Rotor knives: 3 Stator knives: 2 Infeed opening approx. 440×400 mm Drive motor: approx. 11 kW Lhsdpfx Aeyr Ty Tobced

Condition: used, machine/vehicle number: 14019, Rotor diameter: 800 mm Rotor width: 600 mm Rotor knives: 6×16 Stator knives: Infeed cross-section approx. 580×400 mm Drive motor: 75 kW Lhjdsyr Ty Hepfx Abced

Condition: used, machine/vehicle number: 14003, Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3×2 Stator knives: 3 Feed opening approx. 300 x 600 mm Lhjdsyr Tymspfx Abced Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 14018, Rotor diameter: 500 mm Rotor width: 1000 mm Rotor knives: 5 x 2 Stator knives: 2 rows Infeed opening approx. 600 x 1000 mm Lhodoyr Tygjpfx Abcsd Drive motor: 45 kW