Hezinger Maschinen GmbH

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4ROLL 3000X 15 MM, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, sheet thickness (max.): 15 mm, roller (top) diameter: 290 mm, roller diameter: 310 mm, overall weight: 8,500 kg, total length: 5,100 mm, total height: 1,800 mm, total width: 1,500 mm, roller (bottom) diameter: 270 mm, bending length: 3,000 mm, working length: 3,000 mm, roller length: 3,100 mm, sheet width: 3,000 mm, working width: 3,000 mm, side roll diameter: 250 mm, working height: 800 mm, warranty duration: 12 months, cone diameter: 400 mm, type of motor: three-phase motor, power: 7.35 kW (9.99 HP), Equipment: documentation/manual, emergency stop, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation Lrslowfc S Tehccqnsk -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: used, Year of construction: 2006, MODEL MCB 3045 4-ROLL CNC DOUBLE INITIAL PINCH HYDRAULIC PLATE ROLL. Working length 3100 mm Max thickness 40 mm Mechanical/Hydraulic Hydraulic Upper roll Ø 450 mm Ljlhcewdn D Sscqnork Lower/lateral rolls Ø 410 mm Engine Power 29.8 kW Prebending ----- Dimensions 4950.0 × 2450.0 × 2600.0 Weight 29000 kg

Condition: used, Year of construction: 2011, sheet width 2050 mm plate thickness 28 mm pre-bending 22 Control CNC diameter of upper rolls 320 mm diameter of lower rolls 340 mm side roll diameter 280 mm total power requirement 22 kW Lolowc U Rcshccqnork weight of the machine ca. 13 t dimensions of the machine ca. 3,9 x 2,0x 1,8 m 4-roll sheet metal bending machine Specified bending capacity: Refers to 3 x upper roll diameter. With a 960 mm bending diameter and 2000 mm bending width, a maximum sheet thickness of 28 mm is possible.

Condition: good (used), Year of construction: 2001, Bending length: 4000 mm Bending strength: 45 mm Anbiegung (kalt) / Pre-bending (cold): 38 mm Antriebsleistung / Drive power: 100 kW Anzahl Walzen / Number of rollers: 4 Adjustable rollers / Adjustable rollers: 3 Verstellungsart der Walzen / Adjustment type of rolls: hydraulisch Oberwalzendurchmesser / Top roll diameter: 710 mm Unterwalzendurchmesser / Bottom roll diameter: 640 mm Seitdwalzendurchmesser / Side roll diameter: 520 mm Arbeitsgeschwindigkeit / Working speed: 2+4 m/min (up to 8m/min) Gewicht Maschine (mit Walze) / Weight of machine (with roller): 78 t Zusatzausrüstung / Additional equipment: Elektronischer Gleichlauf / Electronic synchronization Luftgekühlter Öl-Kühler / Air-cooled oil cooler Obere Stützvorrichtung / Upper support device Seitliche Zylinderabstützvorrichtung (10t) / Lateral cylinder support device (10t) Infeed table (20t) / Infeed table (20t) hydr. Bladder accumulator / hydr. bladder accumulator Konusbiegenvorrichtung / Cone bending device Lrjljwc Rrvohccqnok

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device Lelswc D Dxehccqnork - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: ready for operation (used), Functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Lslhcswcqpnscqnsrk Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Year: 1972

Condition: good (used), Technical specifications: Working length: 3050 mm Max. bending capacity: 30.0 mm Pre-bending: 25.0 mm Number of driven rollers: 3 Top roller diameter: 410 mm Bottom roller diameter: 380 mm Hydraulic folding bearing Extended rollers for profile bending Control panel with digital display Motor power: 40 kW Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 22 tons Lolewchplehccqnork Accessories: Side hydraulic bending aids

Condition: good (used), Year of construction: 1990, Functionality: fully functional, machine/vehicle number: 4ROLL, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, sheet thickness (max.): 50 mm, roller (top) diameter: 470 mm, roller diameter: 470 mm, overall weight: 43,000 kg, total length: 7,700 mm, total height: 2,470 mm, total width: 2,410 mm, roller (bottom) diameter: 470 mm, bending length: 3,000 mm, type of input current: three-phase, working length: 3,050 mm, roller length: 3,050 mm, sheet width: 3,000 mm, working width: 3,050 mm, side roll diameter: 420 mm, working height: 1,800 mm, type of motor: three-phase motor, power: 37 kW (50.31 HP), input voltage: 380 V, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm Lrslhccqjwb Scmonek - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 20 h, Functionality: fully functional, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine and the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. Available from stock: HAEUSLER EVO 31031 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 31031 4-roll round bending machine / roll bending machine Lelhccqowbqqijnork Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, exhibition machine Availability: immediately Performance: Working width 3100 mm Round bending capacity 14 mm Bending capacity 12 mm Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your requirements. Please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2025, Functionality: fully functional, machine/vehicle number: AK335 PLATE ROLL, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, sheet thickness (max.): 35 mm, roller (top) diameter: 410 mm, roller diameter: 500 mm, overall weight: 15,000 kg, total length: 5,300 mm, total height: 2,100 mm, total width: 2,050 mm, roller (bottom) diameter: 380 mm, bending length: 3,000 mm, type of input current: three-phase, working length: 3,000 mm, roller length: 3,100 mm, sheet width: 3,000 mm, working width: 3,000 mm, side roll diameter: 380 mm, working height: 1,100 mm, warranty duration: 12 months, cone diameter: 600 mm, cone mount: 600 mm, type of motor: three-phase motor, power: 22.06 kW (29.99 HP), Equipment: documentation/manual, emergency stop, 3roll 3000x35 mm MG MODEL AK335 plate bending machine Pinch pyramid dual pre-bend Surface width 3100 mm -Top roll 410 mm -Side rolls 380 mm Capacity rolling -plate width 3000 mm -plate thickness 35 mm -pre-bend 26 mm diameter bending minimum ID 500 mm Capacity increase for plate width 1500x45 mm Configuration -hardened surface high strength of the rollers -Hydraulic power rotation 3 rollers driven with planetary gear unit each roll Synchronized hydraulic speed between the 3 rollers -Cone forming plate rolling Lslhewailcjccqnsrk -Welded plates calibration rolling system -Electric panel of control with commands joysticks for all motion of the machine -Rollers position digital reading with memorize and repeat automatic, NC programmable. -Safety installations with emergency stop -Manuals of instruction DIMENSION 5300X2050XH2100 MM WEIGHT 15 TON POWER INSTALLED 30 Hp

Condition: good (used), Year of construction: 2019, sheet thickness steel (max.): 28 mm, roller (top) diameter: 390 mm, bending length: 2,500 mm, working length: 2,500 mm, Manufacturer: FACCIN Type: 4HEL 2538 Control: Siemens TOUCH Year of manufacture: 2019 Top support Side support with in-feed fingers Fully hydraulic machine Central lubrication Hardened rolls Specifications Metric US Standard Ljlhev Tbcbsccqnork Roll width 2500 mm Sheet thickness with 3 top rolls Ø 24 mm Sheet thickness with 5 top rolls Ø 28 mm Sheet thickness with pre-bending 24 mm Top roll Ø 390 mm Bottom roll Ø 370 mm Side roll Ø 300 mm Number of rolls 4 Bending speed 0 - 5 Bottom roll adjustment 0 - 200 mm/min. Side roll adjustment 0 - 200 mm/min. Control System SIEMENS PGS Classic TOUCH Top Support Yes Side Support Yes Number of Driven Rollers Yes Dimensions (Estimate) Length 6200 mm Width 2400 mm Height 3800 mm Weight 24000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation and is subject to contractual terms. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, sheet thickness steel (max.): 60 mm, roller (top) diameter: 515 mm, roller diameter: 495 mm, overall weight: 29,200 kg, total length: 5,770 mm, total height: 2,760 mm, total width: 2,390 mm, roller (bottom) diameter: 495 mm, roller length: 2,000 mm, sheet width: 2,000 mm, working width: 2,000 mm, side roll diameter: 355 mm, type of motor: electric motor, power: 55 kW (74.78 HP), Equipment: documentation/manual, Interchable top roller 410mm Lrjlhccsv Nhkweqnjk

Condition: good (used), Functionality: fully functional, Roundo PS 3m preebends 16mm, rolls 22mm diam 1.000mm, 30mm diam 3.000mm. Weight ca 16.000kg Including home made Top suport. Ljlhcov I Aclocqnsrk

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 25498, roll diameter: 320 mm, roller width: 2,070 mm, TECHNICAL DETAILS Roller width: 2,070 mm Top roll diameter: 320 mm Bottom roll diameter: 320 mm Ljlhccqov Iq Dwsnerk Side roll diameter: 260 mm Number of rolls: 4 Bending speed: 0 - 5 Sheet thicknesses Sheet thickness with 5 top roll diameters: 25 mm Sheet thickness with pre-bending: 18 mm Sheet thickness with 3 top roll diameters: 20 mm MACHINE DETAILS Length: 4,700 mm Width: 2,000 mm Height: 2,200 mm Weight: 8,700 kg Operating voltage: 380 V Frequency: 50 Hz Motor power: 26 kW Motor speed: 1 x 5 x 4 d/min

Condition: like new (used), Year of construction: 2023, operating hours: 120 h, Functionality: fully functional, type of input current: AC, input voltage: 230 V, Complete ultrasonic washing line, consisting of two 25 LT ultrasonic tanks, a hard water rinse tank, a demineralized water rinse tank with high quality mixed bed resin bottle, and a hot air dryer. Full description below. 1. Ultrasonic tanks No. 1 and 2. Internal dimensions: 350x250x300 mm, 25 liters. External dimensions: 550x450x870 mm. Ultrasound 26KHz, 950W Heating: 230V AC, 1500 W. Thermostat and mechanical timer. 3/4" drain valve at the back of the tank. 2. Hard water rinse tank No. 3. Internal dimensions: 350x250x300 mm, 25 liters. External dimensions: 550x450x870 mm. Mechanical timer. Solenoid valve rinse. 3/4" overflow 3/4" drain valve at the back of the tank. 3. Demineralized water rinse tank No. 4. Internal dimensions: 350x250x300 mm, 25 liters. External dimensions: 550x450x870 mm. 3/4" drain valve at the back of the tank. 230V, 0.37KW circulation pump. 10" double filter pots. 10" activated carbon filters wound 5 microns. 10" filter wound 1 micron. Digital conductivity measuring bridge. High quality mixed bed resin bottle, capacity 39 liters. Lolhccsv If Ahoqnsrk 4. Hot air dryer No. 5. Internal dimensions: 350x250x300 mm, 25 liters. External dimensions: 610x450x870 mm. Fan: 230V AC, 250W. Heater: 230V AC, 2000W. Electronic thermostat, mechanical timer. 5. Accessories. Joint cover between 25 liter tanks.

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: M1617, sheet thickness steel (max.): 25 mm, overall weight: 40,000 kg, bending length: 4,200 mm, power: 40 kW (54.38 HP), bale length: 4,350 mm, TECHNICAL DETAILS Sheet width: 4200 mm Sheet thickness: 25 mm Pre-bending: 20 mm Bale length: 4350 mm Total power: 40 kW Roller dimensions Lreljv E Nt Sjhccqnsk Top roller diameter: 430 mm Bottom roller diameter: 435 mm Side roller diameter: 360 mm MACHINE DETAILS Machine dimensions (LxWxH): 9700 x 2500 x 2400 mm Machine weight: approx. 40,000 kg EQUIPMENT - Hydraulic counter bearing - 1 exchangeable top roller (305 mm diameter)

Condition: used, Year of construction: 1980, Functionality: fully functional, machine/vehicle number: plate roll 2500x45 mm, sheet thickness steel (max.): 45 mm, sheet thickness (max.): 50 mm, roller (top) diameter: 500 mm, roller diameter: 500 mm, overall weight: 40,000 kg, roller (bottom) diameter: 500 mm, bending length: 2,500 mm, type of input current: three-phase, working length: 2,500 mm, roller length: 2,550 mm, Equipment: emergency stop, 3 roll mechanical plate bending machine 2500 x 45 mm brand Ferro Italy model CIT-23 Capacity: Plate width 2500 mm Plate thickness 45 mm Prebend 38 mm Diameter of bending 2000 mm Lelhov Eyrrjccqnork Capacity 2500 x 35 mm for diameter 750 mm mechanical plate roll with pre-pinching upper roller size 500 mm side rollers size 500 mm left/right side independent vertical pinching prebend power installed to run each of the side roller 40 Hp electric motor rollers rotation centralized gear unit powered electric Hp 45 dual speed rotation fast/slow voltage 3 phase 380/50 Machine weight 40 Ton open front drop-end hydraulic to unload the closed shells top roll hydraulic tilt-up wide opening to unload the formed plate console with push buttons electric to control the machine position readout of bending rollers for repeatability of rolling works emergency stop buttons and safety shut down system all around the machine Electric power units with all wiring new rebuilt. Overhauled new bushings and bearing fully controlled and replaced

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, sheet thickness steel (max.): 125 mm, roller (top) diameter: 900 mm, roller diameter: 900 mm, overall weight: 1,32,000 kg, total length: 8,300 mm, total height: 3,900 mm, roller (bottom) diameter: 800 mm, bending length: 3,500 mm, type of input current: three-phase, working length: 3,500 mm, roller length: 3,600 mm, type of motor: three-phase motor, power: 175 kW (237.93 HP), input voltage: 380 V, roll diameter: 900 mm, net weight: 1,32,000 kg, usable length: 3,500 mm, material thickness: 125 mm, Equipment: documentation/manual, emergency stop, Hydraulic 3 Roll Heavy Duty Plate Bending Rolls..... LARGE CAPACITY >>>>LOW PRICE!!! Variable Geometry Type Manufacturer: ISOLID (Spain) Maximum Rolling Capacity: Mild Steel: Prebending 3.6m x 90mm Rolling 3 6m x 125mm thick Top Roll Diameter: 900mm Bottom rolls Diameter: 800mm Maximum Top Roll Pressure: 1500 tonnes. Installed power: 175kw Hydraulic Top Roll Drive Hydraulic Vertical Roll Adjustment. Hydraulic Independent Bottom Rolls Lateral adjustment. Hydraulic Drop End Year of Manufacture 2014 CE Certified Machine weight 132 tonnes. PLC Control with Graphics. Condition: Excellent. Lrolhsv Edchjccqnjk

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: MG07100H, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness (max.): 100 mm, roller (top) diameter: 480 mm, roller diameter: 600 mm, overall weight: 20,000 kg, total length: 3,600 mm, total height: 2,760 mm, total width: 2,500 mm, roller (bottom) diameter: 450 mm, bending length: 700 mm, type of input current: three-phase, working length: 700 mm, roller length: 750 mm, sheet width: 700 mm, working width: 700 mm, side roll diameter: 450 mm, working height: 1,800 mm, cone diameter: 600 mm, type of motor: three-phase motor, power: 36.77 kW (49.99 HP), Equipment: documentation/manual, emergency stop, 3roll plate bending machine year 1999 make MGsrl model 750x100 mm Thickness bending capacity 100 mm Width max 750 mm planetary hydraulic roll bending machine with pre-pinching Top roll size 480 mm Side rolls size 450 mm Voltage 380/50 Vac, 50 Hp motor electric power installed on hydraulic unit Configuration: hardened surface of the 3 rolls 3 rolls power driven planetary gearbox and hydraulic motor each roll independent Calibration system for the re-rolling of welded shells. Set of rings to clamp on rolls for align and guide the plate sheet Console electric on wheels with centralized commands joysticks and digital readout. Opening front side hydraulic drop-end to unload closed shells. Variable speed working slow/fast Emergency stop and safety systems installed in compliance with regulation. Dimension 3600x2500 mm v height 2760 mm Weight 20 Ton Ljlhccev A Iwqsqnjrk Machine in good working condition , controlled and tested.

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: AK316, sheet thickness steel (max.): 16 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness copper (max.): 16 mm, sheet thickness (max.): 20 mm, roller (top) diameter: 300 mm, roller diameter: 350 mm, overall weight: 8,000 kg, total length: 4,500 mm, total height: 1,500 mm, total width: 1,300 mm, roller (bottom) diameter: 270 mm, bending length: 3,000 mm, type of input current: three-phase, working length: 3,100 mm, roller length: 3,100 mm, Equipment: documentation/manual, emergency stop, 3roll 3000x16 mm MG MODEL AK316 plate bending machine Surface width 3100 mm -Top roll 300 mm -Side rolls 270 mm -Power electric 10 Hp -Weight 8 ton Capacity -plate width 3000 mm -plate thickness 16 mm -pre-bend 12 mm Rolling diameter from 350 mm and above Configuration complete for use: -the 3 rolls hardened high surface strength -the 3 rolls driven hydraulic with axial planetary gear individual each roll synchronized rolling speed hydraulic automatic balance Lrslhccjv Agkpoqnek -conical bending attachment for cone bending -re-rolling system for seam welded shells -console centralized with hydraulic commands -Digital position readout to repeat bending with accuracy -Safety installations with emergency stop. -Manuals of instruction DIMENSION 4500X1300XH1500 MM Machine in very good conditions

Condition: used, Brand:CASANOVA Model: PCV 35- 3 RODILLOS Descritción • Capacity 3050 x 20 mm • Voltage 400v/50h • Weight 15000 kg Lrelhevx A Amsccqnek

Condition: good (used), Functionality: fully functional, machine/vehicle number: 804, sheet thickness steel (max.): 16 mm, sheet thickness (max.): 16 mm, overall weight: 12,500 kg, bending length: 2,500 mm, roller length: 2,550 mm, 3-roll bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Lrolhccovxbm Rjqnok Number: 804, overhauled in 1987 The machine has a very sturdy construction and was only used for one shift. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Conical bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm A step frame for the machine is also available for purchase.

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 3roll 3000x25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness copper (max.): 25 mm, roller diameter: 350 mm, overall weight: 9,000 kg, bending length: 3,100 mm, type of input current: three-phase, working length: 3,000 mm, roller length: 3,100 mm, Equipment: documentation/manual, emergency stop, 3ROLL MODEL 3100x25mm -top roll mm. 360 Ljlhovtykqsccqnjrk -Power electric 20 Hp Capacity -plate width 3000 mm -plate thickness 25 mm -pre-bend 16 mm Small bending diameter 450 mm -the 3 rolls hardened high surface strength -the 3 rolls driven hydraulic with axial planetary gear individual each roll synchronized rolling speed hydraulic automatic balance -conical bending attachment for cone bending -re-rolling system for seam welded shells -console centralized with electric commands -Digital position readout programmable to repeat bending -Safety installations for emergency stop. -Manuals of instruction Available tooling can be added NC programmable 3 axis controller - network connect to comply Industry 5.0 Lateral hydraulic arm support to hold in place thin plates formed into large diameters Upper central support 2 ton capacity to hold the shell formed hydraulic run up to ID 3200 mm

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 3ROLL3000X50MM, sheet thickness steel (max.): 50 mm, roller (top) diameter: 500 mm, roller diameter: 500 mm, overall weight: 26,000 kg, roller (bottom) diameter: 460 mm, bending length: 3,000 mm, type of input current: three-phase, working length: 3,000 mm, roller length: 3,100 mm, Equipment: documentation/manual, emergency stop, model 3 roll planetary with pre-pinch 3000x50 mm upper roll size 500 mm Lrolhcsvr S S Recqnjk CAPACITY plate width 3000 mm plate thickness 50 mm prebending 36 mm diameter rolling 2200 mm performance on plate quality 355 MPa ---- reducing plate width 2000 mm capacity thickness 55 mm --- minimum diameter of rolling 600 mm all the accessories installed hardened rolls conical attachment digital position readout power installed 50 Hp weight of the machine 26Ton

Condition: good (used), Technical data: Working length: 3050 mm Max. bending capacity: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Pre-bending: 25.0 mm Top roller diameter: 460 mm Bottom roller diameter: 460 mm Number of driven rollers: 3 Hydraulic folding bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore requires little space Hydraulic parts installed under the machine The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty. Lolhcjvlg Akocqnjrk