IJZERON Machinehandel

Condition: ready for operation (used), Year of construction: 2016, pressure 40.0 t chamfer lenght 1550 mm distance between columns 1250 mm column arm 295 mm Hnodpfoxn Tx Tjx Aabeu stroke ca. 120 mm dayligth ca. 355 mm table height 775 mm working feed 8.0 mm/sec return speed 100.0 mm/sec Control CYBTOUCH 12 oil volume 100 ltr. total power requirement 5.5 kW weight 3250 kg range L-W-H 2.8 x 1.7 / 2.0 x 2.1 m - in checked conditions - machinevideo - ?v=bpiHgz_jhIc Equipment: - CNC electro-hydraulic press brake - CNC CYBELEC control unit "CYBTOUCH 12" * Large touchscreen * Hand-drawn drawing via Touch Profile function * High-resolution screen * Clear, easy-to-read menus in the operator's language * Tool & product library * USB port for memory sticks * Front left control panel, pivoting - CNC-controlled axes: Y1 + Y2 + X + R axes - CNC electro-motorized backgauge (X axis) - CNC electro-motorized height adjustment (R axis) - 2 manually adjustable stop fingers - AMADA/PROMECAM upper tool holder - AMADA/PROMECAM lower tool holder - 2 stable front material/sheet support arms - 1 freely movable foot switch - Side guards (2 pivoting doors) - Rear guards (light barrier)

Condition: good (used), Year of construction: 1990, Press force: 50 t Bending length: 2085 mm Hnodpfx Aoxnyi Ssabsu Distance between uprights: 1690 mm Stroke: 105 mm Throat depth: 400 mm Table height: 960 mm Total power requirement: 6.5 kW Machine weight approx.: 3,450 kg Space requirement approx.: 2500x1800x2200 mm

Condition: used, functionality: fully functional, Year of construction: 1998, Used Baykal press brake Type: APH 2604 X 60 Capacity: 2500 x 60 tons Hnjdpfx Aaoxnqdmobju Electric backgauge Electric depth adjustment 1 set of tools Year of manufacture: 1998

Condition: used, Promecam CTH425 Powered Guillotine, Force 1300, Course 110, 2400mm Wide, Light Guards at Rear. S/No. 220. Country of Origin: France Pre-auction offers considered. Hnedpexnl Itefx Aabou Please Note: These lots are located in Hertfordshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1988, Amada Promecam ITS 5020 CNC Pressbrake With Promecam CNC MB Control Maximum Tonnage 500 KN. Maximum Bending Length 2,000mm. Working Top Height 960mm. Intake 370mm. Maximum Stroke 105mm. Goose Neck 400mm. Sideplate Entry 1,690mm. Approx Speed 85mm/sec. S/No. ITS 050 20 107 (1988). Hodpfxjxnb Ehs Aabenu With Assorted Tooling, Sick Safety Curtain & Foot Switches. Overall Dimensions W2,500 x D1,745 x H2,180mm. Weight 3,450kg.

Condition: good (used), Year of construction: 1998, pressure 50 t chamfer lenght 1250 mm distance between columns 1070 mm Stroke beam 100 mm Hnsdpfxsxl E Tkj Aabou max. opening beam/table 370 mm C-recess 300 mm max travel X-axes 400 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 56000 h length 1600 mm width 1500 mm height 2000 mm weight 2600 kg total power requirement 2,5 kW dimensions of the machine ca. 2x2x2 m weight of the machine ca. 2,56 t All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: good (used), functionality: fully functional, Year of construction: 2004, The machine is in good technical condition. Nominal forming force: 65t Working length: 2550mm Weight: 5500 kg Inspection in operation is possible by prior arrangement. Hsdpfx Aoxlr T Reabenu

Condition: good (used), Bending length / working length: 2,500 mm Pressing force / bending force: 1,500 kN (≈ 1,500 kN) Max. sheet thickness (steel): approx. 2.0 mm Max. sheet thickness (aluminium): approx. 3.0 mm Max. sheet thickness (stainless steel / higher tensile strength): approx. 1.25 mm Max. bending height: approx. 300 mm (depending on model) Power / capacity (electric): 24 kW Hnodoxgh T Aspfx Aabsu Machine dimensions: 4,050 × 1,600 × 2,400 mm Weight ~ 13,000 kg

Condition: defective spare-parts repository (used), functionality: limited functionality, Year of construction: 1985, operating hours: 55,382 h, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, bending force (max.): 50 t, working width: 2,000 mm, throat depth: 400 mm, distance between stands: 1,690 mm, operating speed: 14 mm/s, number of axes: 3, type of crowning: manual, overall weight: 3,000 kg, Equipment: documentation/manual, emergency stop, foot remote control, lower tooling, upper tooling, PROMECAM IT2 50/20 - Used machine Calibration would be needed after setting up. Hnjdpjxgfchofx Aabou Tooling in photo included.

Condition: good (used), Edwards Pearson 60ton x 2500 mm. 4 Axis Back-gauge. In original condition. Just Serviced. with Manuals. can load to suitable transport. Taken back in PX will take £6500 Hnodpfxoxfcd To Aabju

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 100 h, machine/vehicle number: C121043, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 44 t, working width: 1,300 mm, stroke length: 270 mm, distance between stands: 1,230 mm, installation height: 470 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 4, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 2,400 kg, total length: 2,350 mm, total width: 1,220 mm, total height: 2,100 mm, power: 5 kW (6.80 HP), input current: 32 A, warranty duration: 36 months, pressing force: 44 t, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Compact Electric Press Brake C12 CoastOne - Made in Finland Press force: 44T Bending length: 1300mm Spindles: 2x22T Hsdpfxjxd U S To Aabenu Control: TC15-2D Graphic Backgauge: 2-axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools included 36-month warranty after installation Delivery not included; available immediately Inspection under power is possible at any time by appointment!

Condition: new, Year of construction: 2025, control type: CNC control, bending force (max.): 63 t, working width: 2,000 mm, travel distance X-axis: 550 mm, back gauge adjustment: CNC-controlled, back gauge: 550 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Brand new 3-axis CNC-controlled press brake with automatic bending angle calculation and color graphics. Maximum pressing force: 630 kN = 4 mm steel sheet S235jr bent along the entire bending length with a V-width of 36 mm Maximum bending length: 2,000 mm Distance between side frames: 1,320 mm Throat depth in side frames: 250 mm Ram stroke length: 100 mm Maximum installation height: 320 mm Ram travel speed downwards: 50/6 mm/sec, upwards: 60 mm/sec Table width: 160 mm Back gauge adjustment range: 550 mm Hsdpfx Aajxdiyrebsnu Oil tank capacity: 250 liters Dimensions approximately 2.6 x 1.5 m x height 2.4 m Drive power: 5.5 kW Weight: approx. 3,500 kg Equipment: - Die block - Bending punch

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, Fasti CNC pressbrake Model 904 - 50/20 Year : 1995 Capacity : 2050 mm. x 50 tons CNC control : Delem DA 23 e - 6 axis 2 hand control and footpedal Front arms Hnedpfjxdahgsx Aabou Angle punch : 2000 mm. in segment Gooseneck punch : 2000 mm. in segment Gooseneck punch : 1000 mm. V die : 10 - 15 - 22 mm. in 2000 mm. V die : 30 - 40 mm. in 1000 mm.

Condition: good (used), Year of construction: 2016, Servo Mechanical pressbrake TS1 Toucscreen controller WILA Mechanical tool clamping Delta-X and R Axis backgauge Fast high speed pressbrake Less power consuption and no hydraulic pump ! High speed accurate bending  Max. bending length: 2040mm Distance between column: 2040mm Max. pressing force: 50T Dis. Beam - Table: 590mm Beam stroke: 300mm Approch speed: 9600mm/min. Working speed: 3000mm/min. Hnsdpfjxc Hkxex Aabsu Adjustment X-Axis back gauge:0 - 1000mm Number of controlled axis: 4 Length: 3030mm Width: 1775mm Height: 2510mm Weight: 6100kg

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: CYBELEC, controller model: MODEVA 15T, bending force (max.): 60 t, working width: 1,250 mm, stroke length: 265 mm, throat depth: 450 mm, distance between stands: 1,050 mm, number of axes: 4, type of crowning: CNC-controlled, travel distance X-axis: 650 mm, Equipment: european tool clamping system, DURMA press brake 1250 x 60 tons, year 2017 Hnsdpfx Aaexcfqqsbou

Condition: used, Year of construction: 2004, pressure 50.0 t chamfer lenght 1275 mm distance between columns 1040 mm column arm 250 mm ram stroke speed 225 mm/sec work speed 0 - 9.8 mm/sec return speed 160 mm/sec work stroke 215 mm dayligth 512 mm table height 800 mm back stop - adjustable 600 mm control DELEM DM 51 operating pressure max. 300 bar oil volume 150 ltr. voltage 400 V engine output 6.0 kW Weight 4300 kg range L-W-H 1930 x 1510 x 2390 mm current new price approx. 80.000 euros Hodpfx Asxab U Hjabjnu special price on request good / well-maintained condition (!!) - in checked condition - machine video - ?v=5L8L2AYv0PU ----- PLACKE electro-hydraulic CNC press brake specially developed for the production of small parts The advantages: • Low energy consumption • High operating comfort • Wide range of applications • Fast, robust, low-noise • With CNC control as standard ----- Equipment: - CNC electro-hydraulic press brake with 1x working cylinder - DELEM CNC control model "DM 51" - CNC controlled axis: Y1 - Y2 - X - CNC electro-motorized back stop * Travel path: X = max. 600 mm * Travel speed X axis .. max. 300 mm/s * Positioning accuracy .. +/- 0.02 mm * with 2x manually adjustable stop fingers (R+Z axis) - WILA standard - manual upper tool clamping - WILA standard - manual lower tool clamping - PLACKE safety device at the front: light barrier - side protective device (swivel doors) - rear protective device (swivel + lockable door) - front storage area - side sorting system for bending tools - 1x freely movable foot control - original operating instructions including circuit and hydraulic diagram

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: Hsdpfx Aaexabutebsnu - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes Hnjdsxabt Aepfx Aabju

Condition: new, pressure 60.0 t chamfer lenght 2100 mm distance between columns 1700 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 5640 kg range L-W-H 3250 x 1960 x 2750 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Hsdpfx Asxabcksabjnu Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15.0 kW weight 9450 kg range L-W-H 4250 x 2150 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine Hnjdexaax Ropfx Aabeu - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: used, Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg range L-W-H 2320 x 1280 x 2030 mm very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control) Hnjdpfx Aasxaanxobsu

Condition: used, Year of construction: 2004, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm working feed 10.0 mm/sec Hnsdpow U U Ttofx Aabeu return speed 61.0 mm/sec stroke 100 - 140 mm dayligth 450 mm table height 860 mm oil volume 100 ltr. Control ELGO P8822 operating pressure max. 200 bar Number of working hours ca. 2.370 h voltage 380 V total power requirement 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 3000 x 1850 x 2050 mm good / well-maintained condition (!!) with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - ?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Safan electric press brake type SMK-K-50-2550 TS2 working width 2550 mm max. pressing force 50 tons Safan CNC control with touchscreen, type TS2 CNC-controlled Y-X-R-Z1 and Z2 axes Hedpjw Uf I Isfx Aabonu including a set of tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, bending force (max.): 50 t, Amada press brake 2000x50 tons, year 2006, 6 axes, Promecam clamping, model HFE Hedpfx Ajw S Uc Njabonu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, actuation type: hydraulic, bending force (max.): 56 t, working width: 2,200 mm, throat depth: 200 mm, distance between stands: 2,100 mm, TECHNICAL DETAILS Press force: 56 t Bending length: 2,200 mm Distance between uprights: 2,100 mm Throat depth: 200 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Space requirement: 2,800 x 1,800 x 2,400 m Hodew Sxcyepfx Aabonu Machine weight: 6,100 kg