Steffen graphische Maschinen

Condition: good (used),

Condition: new, Year of construction: 2026, Step adapter for power tools, consisting of four elements that allow diameter reduction from 100 mm to 68/46/40/35 mm. Kwedpfx Ajycvhnsdwot

Condition: used, mileage: 6,84,434 km, power: 331 kW (450.03 HP), first registration: 12/2019, fuel type: diesel, tire size: 315/70R22.5, tire condition: 50 %, axle configuration: 6x2, wheelbase: 3,850 mm, fuel: diesel, fuel tank capacity: 450 l, color: orange, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,200 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, fridge, parking heater, = Additional Options and Accessories = - Radio/CD = Further Information = General Information Cab: SC Technical Information Kwsdpjycvg Dsfx Adwjt Number of cylinders: 6 Axle Configuration Front axle: Tire size: 315/70R22.5; Tire tread: 50%; Reduction: single reduction; Suspension: parabolic suspension Rear axle 1: Tire size: 275/70R22.5; Tire tread: 80%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tire size: 315/70R22.5; Tire tread: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,749 kg Payload: 16,151 kg Gross vehicle weight (GVW): 23,900 kg Layout Number of beds: 1 Condition Damages: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are ready for immediate use. From our site in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: like new (used), Year of construction: 2019, functionality: fully functional, control voltage: 400 V, We offer: Donau Alpha 30 Mk4, year of manufacture 2019, speed range 60-3150 rpm, weight 2150 kg. Kwedsycvgwopfx Adwet

Condition: excellent (used), functionality: fully functional, Double-shaft multiblade saw TOS SVITAVY PWR 422 450/250mm Track width: 450mm Shaft width: 450mm Shaft diameter: 60mm Bushing diameter: 80mm Maximum cutting height: 20–250mm Saw blade diameter min/max: 250–450mm Maximum width of incoming material: 860mm Kwsdpfxeycvf Ts Adwet Minimum length of incoming material: 900mm Saw motor power: 2x110kW Feed speed adjustable via frequency inverter: 4–40 m/min

Condition: new, Year of construction: 2026, Tapping Head Spindle Positioner 90° CORMAK GT24 The 90° GT24 tapping head spindle positioner is an advanced tool that significantly improves precision and efficiency in thread-cutting operations. Its main function is to ensure accurate alignment of the electric tapping machine at a 90° angle to the workpiece, allowing perfect spindle adjustment. Thanks to its innovative design, the GT24 positioner guarantees high accuracy and reliability, making it an essential accessory in any threading or machining workshop. Main Advantages of the GT24 Positioner Precise alignment: The positioner enables quick and accurate alignment of the tapping arm at a 90° angle to the workpiece, which is essential for achieving top-quality threads. Ease of use: The positioning process is quick and intuitive, saving time and increasing productivity. High stability: Thanks to its neodymium magnet, the positioner provides strong and secure attachment to the workpiece, minimising the risk of errors during threading. Compatibility: The GT24 positioner is compatible with a wide range of electric tapping machines available on our website, including models such as RGE30PW, RGE36PWx1200, and RGE36PWx1700. Robust construction: The GT24 positioner is made of high-quality materials, ensuring durability and resistance to intensive industrial use. Design and Technology of the GT24 Positioner The GT24 positioner features a sturdy construction designed for intensive use. Its key component is the neodymium magnet, which allows quick and reliable attachment to the workpiece. This technology gives users full control over accurate machine positioning, helping them achieve excellent results in less time. The unit also includes a 90° calibration system that allows precise setting of the tapping arm at a right angle. This setup enables quick adaptation to different threading tasks, making the GT24 a highly versatile and practical tool for any professional or production environment. Precision and Efficiency with the GT24 Positioner The GT24 positioner provides both precision and productivity. With its fast and simple positioning process, users can save valuable time otherwise spent on manual spindle adjustments. The alignment system ensures exceptional accuracy, resulting in better thread quality and reduced risk of machining errors. Furthermore, the positioner allows flexibility when working with various materials and thread types, making it an indispensable tool in production processes. Technical Specifications of the GT24 Positioner Type Neodymium adapter for spindle positioning Ksdpfx Adsycvfyewswt Compatible with tapping machines RGE36PWx1200, RGE36PWx1700, RG24x1200, RG24PWx1200, RG24PWx1700, RG36PWx1200, RG36PWx1700 Angle range 90°

Year of construction: 2016, operating hours: 32,000 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, screw diameter: 45 mm, This Krauss Maffei KME 45 XS was manufactured in 2016. It features a 45 mm screw diameter, high-performance single screw with a 36:1 L/D ratio, and operates at speeds up to 600 rpm. Designed for high-pressure extrusion, it handles thermoplastics and compounds with a throughput of 150-300 kg/h. Consider the opportunity to buy this Krauss Maffei KME 45 XS single screw extruder. Contact us for more information about this machine. Kwedpfxoycvftj Adwet • Extruder type: Single-screw • L/D ratio: approx. 36:1 (XS = high-performance series) • Screw speed: up to approx. 600 rpm • Drive: AC motor with frequency control; high-torque design for compounding • Throughput: approx. 150–300 kg/h (depending on material and screw configuration) • Operating pressure: High-pressure extrusion capable • Material types: Thermoplastics, compounds, masterbatch

Condition: good (used), WEINIG HYDROMAT H-23 10 SPINDLE MACHINE WITH TILT BEAM SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 11 KW Kwodpoycvfmofx Adwot 3: LEFT 11 KW 4: RIGHT 11 KW 30° TILTABLE 5: LEFT 11 KW 6: TOP 11 KW 7: BOTTOM 11 KW 8: TOP 11 KW 9: BOTTOM 11 KW 10: UNIVERSAL 11 KW 360° TILTABLE 60 M/MIN+ ELECTRIC. FEED 14 x DRIVEN TOP FEED ROLLERS 7 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 7+9 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 7500 KGS DUSTHOODS: 10 x 140 MM DIAMETER

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Kedeycvfgopfx Adwewt Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included.

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. Kodpjycvd Njfx Adwjwt This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Condition: excellent (used), Year of construction: 2003, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Automatic lubrication system for bedplates Maximum dimensions 140mm x 230mm No 1.  11kw - Bottom 6000rpm + Outboard bearing - straight jointer prepared No 2. 11kw - Right 6000rpm - straight and profile jointer prepared No 3. 11kw - Left 6000rpm - straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing - jointer prepared Kwodpfxoycvd Ao Adwjt No 5 . 11kw - Top 6000rpm + Outboard bearing - straight jointer No 6 . 18.5kw - Bottom 6000rpm + Outboard bearing - straight jointer 7.5 kw feed. 6-60m/min (Possible to increase speed as needed). 50mm spindles Beam 0.55kW Full documentation included. Possible to supply with hydro tooling if needed. Possible to supply with infeed and outfeed if needed.

Condition: good (used), Year of construction: 2006, operating hours: 1,232 h, fuel type: electric, Year of manufacture: 2006 Drive: Wheel GVW: 3.500 kg Mast: articulated arm Lifting capacity: 200 kg Working height: 1.100 cm Kodpfx Asycvdvedwswt CE mark: yes Technical condition: good Visual appearance: good

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: Kodpfx Adjycvdiswjwt - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) We are happy to answer further questions by phone.

Condition: good (used), Year of construction: 1990, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,250 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,500 mm, table width: 1,500 mm, feed rate X-axis: 2,800 m/min, feed rate Y-axis: 2,800 m/min, feed rate Z-axis: 2,800 m/min, rotational speed (min.): 1,120 rpm, Table type boring mill TOS VARNSDORF - W100A MACH-ID 9351 Make: TOS VARNSDORF Type: W100A Year: 1990 3 axis TESLA NS 114  digital read out Tailstock Face plate 800 mm Distance faceplate to boring bar rest 2800 mm Max. diameter off facing 900 mm Under power inspection possible X - Travel: 1600mm Y - Travel: 1120mm Z - Travel: 1250mm W - Travel: 900mm Table Length: 1500mm Table Width: 1500mm Table load: 3000 Speeds / ranges:1120Rpm Power: 11kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:2800mm/min. Feed rate Y-Axis:2800mm/min. Feed rate Z-Axis:2800mm/min. Kwodpfx Adoycvc Sjwet Feed rate W-Axis:2800mm/min. Length: 6710mm Width: 3000mm Height: 3000mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 8,94,690 km, power: 310 kW (421.48 HP), first registration: 03/2017, fuel type: diesel, tire size: 315/70R22.5, tire condition: 50 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 450 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, fridge, parking heater, = Additional Options and Accessories = Kwedpfx Aoycvc Eodwst - Radio/CD = Further Information = General Information Cab: StreamSpace Technical Information Number of cylinders: 6 Axle Configuration Tire size: 315/70R22.5 Front axle: Tire tread: 50%; Reduction: single reduction; Suspension: parabolic suspension Rear axle: Tire tread: 60%; Reduction: single reduction; Suspension: air suspension Weights Kerb weight: 7,353 kg Payload: 12,147 kg Gross vehicle weight: 19,500 kg Layout Number of beds: 1 Condition Damages: none = Company Information = Heisterkamp Used Trucks BV doesn’t simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are ready for immediate operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 07/2016, loading space volume: 26 m³, total length: 9,100 mm, total width: 2,520 mm, total height: 2,990 mm, color: blue, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - EBS - Lifting axle - Tarpaulin = More information = Kodpfxoycvcro Adwewt Empty weight: 6.540 kg Carrying capacity: 32.460 kg GVW: 39.000 kg Make of bodywork: Meiller Tipper: Back Tyre size on axle rear: 385/65R22,5 Make of axle rear: BPW Suspension on axle rear: air Technical inspection expiration date: 2026

Condition: used, mileage: 1,74,199 km, power: 140 kW (190.35 HP), first registration: 05/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, total length: 8,000 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,460 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, onboard computer, power assisted steering, power mirror, tail-lift, trailer coupling, = Additional options and accessories = Kwjdoycvclopfx Adwet - Adjustable seats - Air seats - Autoradio - Driver seat manual adjustment - Engine brake - Full-size spare wheel - Lane Departure Warning System - Mirror heater - Power windows front - Spare wheel - Spare wheel holder - Steering wheel adjustment - Sun visor - Tachograph - Twin wheels = More information = Engine capacity: 4.580 cc Empty weight: 5.309 kg Carrying capacity: 2.181 kg GVW: 7.490 kg Tail lift: 1000 kg Technical inspection expiration date: 2025 Tail lift: D'Hollandia DHLM.10

Condition: used, axle configuration: 2 axles, first registration: 08/2021, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,300 mm, total width: 2,550 mm, total height: 1,700 mm, color: blue, Year of construction: 2021, Equipment: ABS, = Additional options and accessories = - Twin wheels = More information = Empty weight: 4.560 kg Carrying capacity: 13.440 kg GVW: 18.000 kg Tandem axle: Yes Tyre size on axle rear: 235/75R17,5 Make of axle rear: GIGANT Kjdpfxsycvb Uo Adwswt Suspension on axle rear: air

Condition: used, axle configuration: 2 axles, first registration: 08/2021, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,300 mm, total width: 2,550 mm, total height: 1,700 mm, color: blue, Year of construction: 2021, Equipment: ABS, = Additional options and accessories = - Twin wheels = More information = Kodpfjycvb Iox Adwjwt Empty weight: 4.560 kg Carrying capacity: 13.440 kg GVW: 18.000 kg Tandem axle: Yes Tyre size on axle rear: 235/75R17,5 Make of axle rear: GIGANT Suspension on axle rear: air Technical inspection expiration date: 2026

Condition: used, mileage: 2,85,803 km, power: 129 kW (175.39 HP), first registration: 04/2016, fuel type: diesel, number of seats: 34, gearing type: mechanical, emission class: euro6, color: other, brakes: retarder, total length: 7,800 mm, total height: 3,300 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = - Retarder - Webasto = Further Information = Damages: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All details are provided without guarantee. Subject to error, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more. Kwjdpeycvbujfx Adwot

Condition: used, machine/vehicle number: -6924-, mileage: 1,00,618 km, power: 70 kW (95.17 HP), first registration: 09/2013, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 2, Vehicle Description Fully Equipped Food Truck with New Kitchen We offer flexible hire purchase and leasing options. Please contact us for further details. Vehicle Description Used vehicle with a brand-new, unused kitchen! The kitchen was crafted with great attention to detail. We specialize in converting new and used vehicles into food trucks according to industry standards. Today, we are proud to say that our years of expertise have convinced our customers of our work. Visit us and experience the quality of our vehicles firsthand! Technical Specifications: Engine displacement: 2,143 cm³ Emission standard: Euro 5, Environmental Badge 4 (Green) Permissible total weight: 3,500 kg Rear parking assist Colour: White Catering Equipment, Wooden Kitchen Gas Appliances: Kedpfxsycvbne Adwjwt Gas fryer “Bertos”, 2 x 8-litre tanks, dimensions (W x D x H) 600 x 600 x 290 mm, power: 13.2 kW, stainless steel construction, with drain tap, model GL8+8B Gas cooker “Bertos” with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, power: 12.4 kW, stainless steel construction, model G6F4B Gas griddle “Bertos”, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, power: 8 kW, stainless steel construction, model G6FL6B Cooling Facilities: Fridge with glass front, also suitable for beverages Large refrigerator with integrated chest compartment “Liebherr”, 340-litre capacity Water System: Water system with 30-litre water jerrycan, including fresh and waste water containers Two stainless steel sinks with fittings Hygiene package including foldable paper towel dispenser and soap dispenser 10-litre hot water boiler Water pump Lighting: Ceiling-mounted LED lighting LED accent lighting with colour effects around the sales hatch, controllable via remote Emergency lighting Additional Equipment: Serving counter and worktops made of brushed stainless steel Fireproof insulated wall at the cooking area Extractor hood with labyrinth filters Non-slip catering-grade flooring Optional sneeze guard Built-in insulated generator compartment Step access Required documentation (TÜV inspection and certificate) will be handled by us. Warranty: 1-year warranty on the kitchen We can of course modify this model according to your requirements! Do you need a shorter or longer version of this model? Do you require different equipment for this catering vehicle? Does your equipment require a higher payload or additional sales hatches? You can specify many of the vehicle’s features yourself!

Condition: new, Year of construction: 2026, Features The unit quickly and quietly cleans and filters the air in your workspace. Clear LED display control panel located at the front of the machine. Filters 98% of all dust particles down to 5 microns and 85% of particles as small as 1 micron. Infrared remote control for easy operation — choose between three fan speeds, set the timer, and power the unit on/off. Remote control with automatic shut-off time recording included as standard. The unit can be suspended from the ceiling, providing faster and more efficient air cleaning through better air circulation. Applications Shops Workshops Garages Warehouses Kwedpfxjycvbbs Adwet Laboratories Schools Kitchens Spray booths Carpentry and joinery shops Scope of delivery: Air filtration unit Mounting eyelets (for easy hanging installation) Remote control Technical data Motor power 150 W Voltage 230 V / 50 Hz Maximum air flow (3 speeds) Low: 840 m³/h Medium: 1080 m³/h High: 2030 m³/h Air velocity (3 speeds) Low: 14 m/s Medium: 19 m/s High: 22 m/s Timer settings 1/2 | 1 | 2 | 4 hours Pre-filter (mesh filter) 5 µm Main filter (bag filter) 1 µm Dimensions 710 × 610 × 310 mm Weight 29 kg Manufacturer: Cormak

Condition: good (used), power: 310 kW (421.48 HP), first registration: 01/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 500 l, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,150 mm, total width: 2,500 mm, Year of construction: 2015, Equipment: AdBlue, Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Maximum front axle load: 7,500 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 7,703 kg Payload: 11,297 kg Gross Vehicle Weight (GVW): 19,000 kg Maintenance, History and Condition APK (periodic technical inspection): valid until 01.2027 Technical condition: good Visual condition: good Identification Registration number: 22-BFN-4 Kedpfsycvawsx Adwswt

Condition: used, machine/vehicle number: -6928-, mileage: 29,212 km, power: 70 kW (95.17 HP), first registration: 10/2015, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, number of seats: 2, Vehicle Description Fully equipped food truck with brand-new kitchen Kwsdpfoycvakox Adwot We offer flexible hire purchase and leasing options. Please contact us for more information. Vehicle Description Pre-owned vehicle with a new, unused kitchen! The kitchen was built with great attention to detail. Our mission is the conversion of new and used vehicles into food trucks in accordance with all relevant standards. Today, we are proud to say that our years of expertise have allowed us to consistently win over customers with the quality of our work. Come visit us – we will convince you of the quality of our vehicles! Technical Specifications: Engine displacement: 2,143 cm³ Emission class: Euro 5, Environmental badge 4 (Green) Gross vehicle weight: 3,500 kg Rear parking sensors Colour: Grey Catering Equipment, Wooden Kitchen Gas Appliances: Bertos gas fryer, 2 x 8 litre capacity, dimensions (W x D x H): 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, model GL8+8B Bertos gas cooker with 4 burners, dimensions (W x D x H): 600 x 600 x 290 mm, output: 12.4 kW, made of stainless steel, model G6F4B Bertos gas grill, smooth plate, dimensions (W x D x H): 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, model G6FL6B Refrigeration Small built-in undercounter fridge Water System Water system with canisters, 30-litre capacity with fresh and waste water tanks Two stainless steel sinks with fitting Hygiene package including foldable towel dispenser and soap dispenser 10-litre hot water boiler Pump Lighting LED ceiling lighting LED accent lighting with colour changing feature around the sales hatch, remote-controlled Emergency light Additional Equipment Serving counter and work surfaces in brushed stainless steel Insulated partition at the cooking station (fireproof) Extractor hood with labyrinth filters Slip-resistant catering flooring Optional sneeze guard Built-in insulated generator compartment Access step We take care of all necessary documentation (TÜV inspection and certification). Warranty: 1-year warranty on the kitchen We can of course customize this model for you! Do you need a shorter or longer version of this model? Do you require different equipment for this sales vehicle? Does your equipment require a higher payload or more sales hatches? You can configure many vehicle details yourself!

Condition: used, Year of construction: 2011, machine/vehicle number: IntNr231473, KEYENCE Model Series IM-6020, Year 2011 For sale: Optical measuring system KEYENCE IM-6020, in good and fully functional condition. The IM Series is recognized for its rapid, high-precision and operator-independent measuring capabilities, making it the ideal solution for quality assurance, goods-in inspection, and in-process control applications. Technical specifications (excerpt): Model: IM-6020 Year of manufacture: 06/2011 Measuring principle: Optical / non-contact Measuring range (X/Y): approx. 200 × 200 mm Measuring range (Z): Height measurement via autofocus Measurement accuracy: up to approx. ±2 µm (depending on measurement conditions) Repeatability: Very high, operator-independent Camera: High-resolution CCD camera Illumination: Incident / transmitted / contour lighting Measurement functions: - Length, angle, radius, and diameter measurement - Contour and form measurement - Pass/fail comparison (OK/NOK) - Automatic dimension recognition Software: KEYENCE IM software for rapid program creation Measurement cycle time: several seconds per part (also for multiple features) Condition: - Used Kwsdpfjycu U Tox Adwst - Well maintained - Fully functional - Immediately ready for operation Machine dimensions: approx. 900 x 500 x 1500 [mm] Machine weight: approx. 32 [kg] Viewing under power is possible by prior appointment. Subject to prior sale and technical modifications or errors.