Enpro GmbH

Condition: used, Year of construction: 2013, operating hours: 5,800 h, fuel type: diesel, output current: 361 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 250 kVA, motor manufacturer: Volvo Penta, No. 10038 Diesel generator set Stiegele / Volvo Penta 250 kVA Used, year of construction 2013, approx. 5800 operating hours According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Rated output 250 kVA / 200 kW at power factor cos φ 0.8 Voltage 400 V, 3-phase, 50 Hz Rated current 361 A Speed 1500 rpm Generator duty type S1 (continuous operation) Diesel engine Volvo Penta TAD 734 GE Engine output 250 kW / 335 hp Speed 1500 rpm Alternator Mecc Alte ECO 38-1LN/4 Insulation class H Protection rating IP21 Control system ComAp InteliGen NT Circuit breaker ABB SACE Tmax Emergency stop switch Battery isolator switch Electric starter with starting batteries Soundproof enclosure with large service doors on both sides Base frame with integrated fuel tank Weight approx. 4500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Lrodpfx Ako Afbuuemeu Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), The set includes a Duplo gathering machine with a DSF-2000 feeder, a DBM-500 booklet-making module, and a 500T trimmer. The machine has been serviced, is in fully working condition, and ready for production. Configuration: DSF-2000 – sheet feeder, mileage: approx. 40,000 DBM-500 – saddle-stitch and folding module, mileage: approx. 350,000 Trimmer 500T – trimming machine, mileage: approx. 315,000 Lsdpfxe Afbunj Akmoru The set enables automatic sheet gathering, wire-stitching of booklets, folding, and trimming. It is suitable for the production of promotional brochures, catalogs, instruction manuals, notebooks, training materials, and other multi-page publications. Selected technical parameters: DSF-2000: sheet format from 148 × 200 to 320 × 450 mm. DBM-500: sheet format from 120 × 170 to 350 × 500 mm.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,600 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, SCM Group -STEFANI: 4-sided edgebander complete machine line (2x double-sided edgebanders with vacuum loading, turning unit, drilling and vacuum unloading,) 1. SCG - Vacuum feeder with roller conveyor 2. STEFANI Evolution SSB - double-sided edgebander 3. MAHROS - part turning unit (turning parts by 90°) 4. STEFANI Evolution SSB - double-sided edgebander 5. BIESSE - drilling machine 6. SCG - Vacuum unloading with roller conveyor + including 4x NORDSON units for PUR glue application Lrjdj Afbuhspfx Akmsu -All parts/units were made in Italy. -During the operation the machine line was used only with EVA type of glue. The PUR gluing units have not been used and they are in a brand new condition - applicators on the machine and the 4 NORDSON units. -Please, find the technical parameters in the PDF bellow.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 6,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, The machine is currently undergoing refurbishment; further photos will follow. Classic Magic 500 TU5 -Double miter saw with program/positioning control -Electrically adjustable saw head, speed V = 20 m/min -Saw blade diameter 500 mm -Saw blade bore 32 mm -Max. cutting length 5,200 mm; automatic extension up to 10,000 mm possible for oversized parts -Min. cutting length at 90° = 225 mm -Horizontal pivoting of the saw heads -Miter angle range from 90° to 22.5° (outward) -Saw heads with automatically controlled full protective guards -Profile support roller track (right) -Pneumatic material/workpiece clamping The machine comes with the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Long roller track -Additional tensioner on the roller track -Horizontal + Vertical tensioners -Macro function (ideal for mosquito screen manufacturers) -Oversized part cutting -Shortcut function -Cross-cutting Lodpfx Ae Afbtwokmeru -Automatic cutting -Automatically extending profile support

Condition: good (used), functionality: fully functional, Year of construction: 2017, overall weight: 16,000 kg, maximum load weight: 13,140 kg, empty load weight: 2,860 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, GERMAN DEALER offers: Krone BDF swap body Year of manufacture: 11 / 2017 16,000 kg GVW 2,860 kg unladen Craneable Double mountings Rear doors Telescopic support legs Interior: 7300x2480x2520 mm Labelling is only foil Many swap bodies and carrier trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### Lrjdpfxe Afbtqs Akmou DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES – SUPPLYING SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: used, empty load weight: 3,155 kg, maximum load weight: 14,845 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2014, next inspection (TÜV): 09/2026, loading space length: 7,820 mm, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: Jumbo tandem trailer Galvanized 235/75R17.5 Twin tires BPW axles Drum brakes Spare wheel 3 storage boxes We have many trailers and interchangeable platforms in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY THROUGHOUT GERMANY IS POSSIBLE! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Lodo Afbtkepfx Akmoru

Condition: used, empty load weight: 2,000 kg, maximum load weight: 14,000 kg, overall weight: 16,000 kg, first registration: 07/2014, total length: 7,700 mm, total width: 2,460 mm, Year of construction: 2014, GERMAN DEALER offers: BDF 7.82m construction material platform flat, 150mm frame vertical hole strip Lsdpfe Afbtdex Akmoru end wall 2900mm telescopic support legs suitable for crane loading 16,000 kg gross vehicle weight 2,000 kg tare weight year of manufacture 07/2014 7700 mm x 2460 mm multiple units available many interchangeable bodies and trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN SUPPLYING SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 3,560 h, overall weight: 1,850 kg, Phantomatic T 3 Star >The machine is currently undergoing refurbishment; further photos will follow.< The machine has the following options: > Software CamPlus / Job > Remote control MG Pilot > 8-tool automatic tool changer Lrsdps Afbrtsfx Akmeu > Automatic clamp positioning > Enclosed housing > 2 barriers (for multi-piece machining and overlength machining) > 4-sided machining

Condition: good (used), Year of construction: 2021, operating hours: 6,05,573 h, load capacity: 1,200 kg, lifting height: 2,424 mm, fuel type: electric, mast type: duplex, construction height: 1,765 mm, empty load weight: 900 kg, mileage: 605 km, - Electric stacker - Brand: Still - Year of manufacture: 2021 - Operating hours: 605 h - Capacity: 1,200 kg - Lifting height: 2,424 mm - Mast lowered height: 1,765 mm - INTEGRAL LIFT, ideal for uneven floors - Battery: 2021 Ledpfs Afbrmjx Akmsru - Equipped with a charger - Automatic filling system

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The machine is currently undergoing refurbishment; updated photos will be provided. Cutting length: 5000 mm with 2 saw blades operating simultaneously (for extra-long cuts up to 10 meters). Lredpfx Ako Afbrgemeu Windows 10 PC New saw motors Pneumatics largely new or refurbished With uninterruptible power supply Additional tensioner on the roller conveyor Swiveling material support Automatically positionable via a DC motor, movable saw unit on hardened linear guide rails Travel speed approx. 20 m/min. Minimum section length 335 mm (5 mm) Maximum cutting length 5350 mm (9000 mm) Saw blade drive: 2 x 3 kW, 400 V, saw blade speed 2650 rpm Automatic electronic miter adjustment as standard up to 22.5° outwards and 45° inwards via servo motors External and internal dimension cutting Robust construction and proven workmanship guarantee the highest dimensional accuracy. Extremely stable welded construction with chip collection drawers in the machine bed Particularly large cutting area due to 550 mm saw blades Hydropneumatic saw blade feed Clamping devices, horizontally pneumatic, 1 each on the left and right of the saw blade Roller conveyor, 1.5 m long, with additional material support at the end of the frame LUBETOOL timed spray device Pneumatic saw blade guard Operation via two-hand control according to BG regulations Suction nozzle for connecting a chip extraction system Includes 2 carbide circular saw blades, 550 mm Optionally also available with an integrated extraction system!

Condition: used, input voltage: 230 V, operating pressure: 6 bar, Remeha / Heizbösch Gas 210 ECO 200 used condensing gas boiler for commercial and central heating systems. Nominal heat output range: 20–200 kW. Output at 40/30 °C: 22.7–214 kW. Maximum operating pressure: 6 bar. Electrical connection: 230 V / 50 Hz, 110 W, IP20. Aluminium sectional heat exchanger and modulating gas/air control. Nameplate gas category: AT-I2H; factory setting: 20 mbar. Adaptation to the local gas supply, installation and commissioning must be carried out by a qualified professional. Lrode Afbraepfx Akmsu Net price: EUR 5,000. Exact scope of delivery by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 35 used wood chip and pellet boiler, offered with feeding and fuel extraction system. Nominal heat output: 35 kW. Output range: 10.5–35 kW. Water capacity: 114 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Lambda-controlled combustion and automatic heat exchanger cleaning. Net price: EUR 8,000 including the advertised feeding and extraction system. Exact delivery scope and availability by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility. Lredpo Afbq Nsfx Akmeu

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 48 used wood chip and pellet boiler with Lambdatronic control. Suitable for larger properties, workshops and commercial buildings. Lrodo Afbq Aspfx Akmeu Nominal heat output: 48 kW. Water capacity: 185 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz, 12 A, 430 W. Net price: EUR 6,000. Exact scope of boiler, feeding equipment and accessories by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 110 used wood chip / pellet biomass boiler, supplied with screw conveyor and spring-arm fuel extraction system. Nominal heat output: 110 kW. Water capacity: 320 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Lrsde Afbqvopfx Akmju Net price: EUR 10,000 including the advertised feeding and fuel extraction equipment. Exact delivery scope and configuration by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: good (used), Year of construction: 2019, operating hours: 368 h, load capacity: 1,200 kg, lifting height: 2,024 mm, fuel type: electric, mast type: duplex, construction height: 1,565 mm, empty load weight: 900 kg, mileage: 368 km, - Electric stacker - Brand: Still - Year of manufacture: 2019 - Operating hours: 368 hours - Capacity: 1,200 kg Ljdpe Afbqpofx Akmjru - Lifting height: 2,024 mm - Mast retracted height: 1,565 mm - INTEGRAL LIFT, ideal for uneven floors - Battery: 2019 - Includes charger - Automatic filling system

Condition: good (used), Year of construction: 2018, operating hours: 848 h, load capacity: 1,200 kg, lifting height: 2,024 mm, fuel type: electric, mast type: duplex, construction height: 1,565 mm, empty load weight: 770 kg, mileage: 848 km, - Electric stacker - Brand: Still - Year of manufacture: 2018 - Operating hours: 858 hours - COMPACT - Capacity: 1,200 kg Ledpfo Afbqiex Akmoru - Lifting height: 2,024 mm - Mast lowered height: 1,565 mm - Battery: 2018 - Includes charger - Automatic filling system

Condition: good (used), Year of construction: 2021, operating hours: 1,790 h, load capacity: 1,200 kg, lifting height: 2,424 mm, fuel type: electric, mast type: duplex, construction height: 1,765 mm, empty load weight: 900 kg, mileage: 1,790 km, - Electric pallet stacker - Brand: Still - Year of manufacture: 2021 - Operating hours: 1,790 hours - Capacity: 1,200 kg - Lifting height: 2,424 mm - Mast height (when lowered): 1,765 mm - INTEGRAL LIFT, ideal for uneven floors - Battery: 2021 - Includes charger - Automatic filling system Lredpfs Afbqcox Akmeu

Condition: used, operating hours: 11,700 h, axle configuration: 4x4, power: 124 kW (168.59 HP), fuel type: diesel, maximum speed: 50 km/h, first registration: 05/1999, empty load weight: 6,230 kg, overall weight: 7,500 kg, total length: 4,640 mm, total width: 2,590 mm, total height: 2,920 mm, gearing type: automatic, All-wheel drive, Total weight 7500 kg, Engine replaced at 7,800 operating hours, Transmission replaced at 9,600 operating hours, both replacements performed at a Baywa specialist workshop, Automatic transmission, 50 km/h, German registration Operating hours according to the hour meter The vehicle is preferably sold to commercial businesses or for export; Private sale subject to approval. Sale without warranty. Net price for export Net: 37,700 EUR + (19% VAT) 7,163 EUR = Gross: 44,863 EUR The above information is non-binding; errors/changes and prior sale are subject to change! Lrsdpfx As Afbp Sekmeu

Year of construction: 2012, condition: excellent (used), Dust extraction system with Venturi wet separator Ljdpfx Ako Afbp Ejmsru • Manufacturer: Keller Lufttechnik • Type: VDN-E-3.6-Z5.5 • Year of manufacture: 2012 • Serial number: 1029002 1 1 • Includes accessories: Disposal bucket • Condition: Unknown Operating flow rate: 3,600 mm Drive power: 5.5 kW Water capacity: 440 l Diameter: 894 Height: 2,725 mm

Condition: good (used), Year of construction: 2020, operating hours: 1,247 h, load capacity: 1,200 kg, lifting height: 2,024 mm, fuel type: electric, mast type: duplex, construction height: 1,565 mm, empty load weight: 900 kg, mileage: 1,247 km, - Electric stacker - Brand: Still - Year of manufacture: 2020 Ljdpe Afbpxofx Akmoru - Operating hours: 1,247 hours - Capacity: 1,200 kg - Lifting height: 2,024 mm - Mast height (when lowered): 1,565 mm - INITIAL LIFT, ideal for uneven floors - Battery: 2020 - Equipped with a charger - Automatic filling system

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12170000763, controller manufacturer: Heidenhain, operating hours of spindle: 4,121 h, coolant supply: 40 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DMG DECKEL MAHO DMU 105 monoBLOCK – 5-Axis CNC Machining Center Year of manufacture 2013 | Heidenhain iTNC 530 HSCI | 18,000 RPM | 60 tool positions | Spindle renewed For sale is a high-quality 5-axis CNC machining center, DECKEL MAHO DMU 105 monoBLOCK, with extensive optional equipment. The machine was used for the precise machining of demanding milling parts and features powerful equipment for 5-axis simultaneous machining. Of particular note is the main spindle, which has already been replaced. The spindle was replaced after 24,687 spindle hours. The currently installed spindle has only 2,808 operating hours. Technical data Feature Equipment Manufacturer DECKEL MAHO / DMG Model DMU 105 monoBLOCK Year of manufacture 2013 Control system Heidenhain iTNC 530 HSCI Machining 5-axis simultaneous Travel in X 1,135 mm Travel in Y 1,050 mm Travel in Z 750 mm Spindle speed 18,000 RPM Tool interface SK40 Tool magazine 60 positions Swivel range A-axis +120° / -120° Rotational range C-axis 360° Table size 1,200 × 850 mm Rotary table diameter 1,050 mm Maximum table load 1,500 kg Operating hours and spindle replacement Machine operating hours: 42,848 h Spindle replacement at: 24,687 spindle hours Current spindle hours: 2,808 h The spindle replacement already carried out represents a significant advantage compared to comparable used machines with high spindle operating hours. Extensive optional equipment Control and measuring technology Heidenhain iTNC 530 HSCI Heidenhain TS 649 infrared workpiece probe BLUM laser for tool length and diameter measurement 3D quickSET expansion package Electronic Heidenhain handwheel ATC Tuning Cycle for optimizing machining parameters Tool and spindle system Main spindle with 18,000 RPM SK40 tool interface 60-position vertical chain magazine Active spindle cooling Cooling air blow function through the spindle Coolant and chip management Internal cooling through the spindle with 40 bar Coolant system with 800-liter tank Chip conveyor with paper band filter Coolant ring nozzle on the spindle head Flushing gun with pump Chip flushing in the working area Lsdpfx Ako Afbprjmsru Oil and emulsion mist separation with mechanical filter Other equipment NC swivel rotary table Operating mode 4 – Process monitoring in production German machine documentation Electrical wiring diagrams Machine description The DMU 105 monoBLOCK impresses with its generous working area, its stable machine construction and the extensive equipment for demanding 5-axis milling operations. The combination of Heidenhain control, 18,000 RPM spindle, 60 tool positions and integrated workpiece and tool measurement makes the machine suitable for both single-part production and economical series production. The powerful coolant system with 40 bar internal cooling, paper band filter and large coolant volume complements the extensive equipment. A particular advantage is the renewed main spindle with only 2,808 operating hours. The machine is being offered for sale due to a change in operations. Inspection possible by appointment. Fixed price!!! Price is non-negotiable.

Condition: used, Morgan Rushworth Section Rolls Model HSR 60/215, Year 2021, Serial No 295769, In/Out Feed Conveyors 2m x 900mm wide x 1.2m high Ljdpfx As Afbpfjkmsru

Condition: refurbished (used), functionality: fully functional, Hand feeding production Booklet maker, stitching, folding and front edge trimmer, automatic settings to the paper format, min. paper format 230 x 120mm, max. paper format 520 x 350mm, two Hohner 48/5S BDH stitching heads, head and corner stitching possible. Machine is ideal for offline hand feeding booklet maker. Most of the belts and other wear parts were replaced. It is tested and in a good working condition. Lredpfe Afbn Uox Akmou

Condition: good (used), We are selling our steel grain silo. The silo consists of 2 halves and is bolted together in the middle. Ljdpfxs Afbnns Akmjru Diameter 1.50 m, height 2.50 m. Outlet and inlet are available.

Condition: used, Year of construction: 2019, color: grey, overall weight: 16,000 kg, maximum load weight: 13,200 kg, empty load weight: 2,800 kg, loading space volume: 45 m³, loading space width: 2,460 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, first registration: 06/2019, axle configuration: 2 axles, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41953 Gnipol, NW745SF * Year of manufacture: 2019 * 7.45 * Fixed roof * Load securing rail * Portal door * Furniture version * Telescopic support legs * Galvanized * Other * Gross vehicle weight: 16,000 kg * Unladen weight: 2,800 kg * Payload: 13,200 kg * Permissible gross vehicle weight: 16,000 kg Lsdpfs Afbl Tjx Akmeru * Internal dimensions: L = 7300 mm, W = 2460 mm, H = 2520 mm * Internal volume*: 45 m³ * Dimensions of corner fittings: E = 5853 mm * Dimensions of overhang: 799 mm * Lowering height: 1320 mm * Pallet spaces: 18 * 3-row load securing rail * Telescopic support legs * Lowering height adjustable * Light strip Disclaimer: Subject to change, prior sale, and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained staff; we will be happy to advise you.