Herkert

Condition: good (used), Year of construction: 2001, WEIMA WL4 S Opening : 600 x 900 mm Rotor with 14 knives ( Trapez, 4 sides ) Rotor rpm : 90 Seiwe holes : Ø 15 mm Engine size : 22 Kw Dust extraction nozzle : Ø 160 mm Electric cabinet with emergency stop push button. Isdpfjx I I Ixox Aanstr Set of extra knives included Machine dimentions : L 1900 x W 1200 x H 1800 mm Weight : 1300 Kg

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting Itsdsx Iwfmjpfx Aanor area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Iodpox Ilp Hofx Aanetr

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Motor: 18.5 kW Rotor diameter: 248 mm Hopper opening: approx. 620 x 800 mm Standard screen 30 cutting knives Iedpox H U Ngsfx Aanjtr Extraction port: 160 mm Dimensions (LxWxH): approx. 1732x1157x1650 mm Weight: approx. 1100 kg Availability: short-term Storage location: Flörsheim

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 10 kg, color: blue, operation weight: 10 kg, maximum load weight: 10 kg, empty load weight: 10 kg, Hello, I am offering for sale a shredding line, entirely manufactured by OSKA. The line was produced in 2010 and was refurbished by the manufacturer in 2021. The line consists of: - Infeed table - 32 m long vibratory trough - OKRR 550 chipper - 20 m redler conveyor with three lockable discharge chutes - New chain for the redler - Complete control system Isdpfxjx H Ii He Aanetr - Full documentation - Four sets of knives Price: 289,000 PLN

Condition: used, Year of construction: 2000, functionality: fully functional, Used Laiotz shredder. Includes frequency inverter, forward and reverse operation. Adjustable speed. Comes with 2 used and 4 new blades. 40 hp motor. Iodjx Hxqhepfx Aanstr

Condition: ready for operation (used), functionality: fully functional, Schutte-Buffalo 1590 – hammer mill, 132 kW motor For sale: Schutte-Buffalo hammer mill, model 1590. Complete machine with start-up system and extraction ventilation. Designed for wood shredding (other materials negotiable), robust industrial construction. Configuration / Equipment Installed motor: 132 kW, 1500 rpm Control cabinet: star–delta start-up Extraction fan (included): 30 kW Option to install 150 kW motor – engine available optionally for buyer Ijdpfxox Hgxaj Aanjtr Additional knives/hammers as replacements – included Technical data Weight: 3580 kg Rotor width: 910 mm Shaft diameter: 30 mm Knives/hammers: 90 mm Output: approx. 9 m³/h of dry timber (approx. 10% moisture), softwood

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WAG 200 LK04, overall weight: 4,000 kg, fuel type: electric, color: red, REINBOLD 1400 – German Shaft (Rotor) Shredder For sale: Reinbold 1400 shaft shredder (German manufacture). Machine for shredding wood and wood waste, robust construction, weight approx. 4 t. Technical specifications Main motor: 30 kW Hydraulic pump: 4 kW Working width of rotor: 136 cm Rotor diameter: 25 cm Loading hopper – top dimensions (L x W): 257 x 190 cm Loading hopper – bottom dimensions (L x W): 100 x 136 cm Chip discharge: Ø 250 mm Equipment Screens included: Ø 12 mm and Ø 16 mm Ijdpfxex Hgire Aanotr

Condition: excellent (used), Year of construction: 2008, operating hours: 1,341 h, functionality: fully functional, machine/vehicle number: H3149/62, power: 18.5 kW (25.15 HP), overall weight: 1,020 kg, Machine in very good condition with low operating hours. Located at a small business that has now ceased production. The machine has been very well maintained with regular servicing. Iodpfox Hal Tsx Aanetr Opening 620 x 800 mm Rotor width 620 mm Dimensions L1750xW1220xH1650 mm Weight 1020 kg

Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet fully overhauled Isdpfx Aasx E T Ilonetr new couling unit READY FOR DISPATCH

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm Ijdpfxjx E T Ifo Aanjtr AVAILABLE AND READY TO WORK

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E - 2 x 110 kW - with outlet conveyor and magnet Iodpfxex E T H Ue Aanstr - with new belts for outlet conveyor and magnet - rotor length 1 900 mm

Condition: good (used), functionality: fully functional, power: 37 kW (50.31 HP), Shredder Manufacturer: Weima Model: WL12 Shredder for pallets, MDF, and all types of residual wood Feed opening: 1200 x 1200 mm Hopper capacity: approx. 2 m³ Slow-speed machine with hydraulic pusher floor Performance depending on material: 2 – 4 hopper fillings per hour Iedjx E Rkdjpfx Aanotr Motor: 37 kW Shredder rotor with 8 x reversible knives (indexable breaker plates) Knives can be easily and quickly rotated or replaced via screws Knife shaft/rotor diameter: 368 mm Rotor speed: 90 rpm 64 knives Extraction nozzle diameter: 200 mm Air velocity at extraction nozzle: 28 m/sec Rotor and gearbox replaced 6 years ago Dimensions: 2500 mm x 1900 mm x 1750 mm (LxWxH) Weight: approx. 3,300 kg

Condition: good (used), functionality: fully functional, power: 37 kW (50.31 HP), Pre-shredder, chopper, shredder Manufactured by Piranha for wood and plastic Motor 37 kW Shaft length 600 mm Itodpfxjx E An Ie Aanjr with 3 x 5 cutting blades with 35 mm screen with control unit

Condition: used, Year of construction: 2022, operating hours: 300 h, functionality: fully functional, power: 100.03 kW (136.00 HP), overall weight: 5,500 kg, fuel type: diesel, The BBT 400 Woodzilla is a 360° rotatable, compact, powerful, mobile drum chipper with aggressive feed, mounted on a truck trailer chassis. Technical Data Year of manufacture: 2022 Operating hours: approx. 300 hrs Drive: Diesel, Deutz TCD 3.6, 100 kW (136 HP), Stage 5 Feed opening: 320 x 500 mm Chipping drum: 400 x 500 mm, 4 knives Max log diameter: 32 cm Infeed table length: 1300 mm Support: 4-way hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chipper and crane Trailer towing eye: 40 mm Brake: Air brake system, Duomatic 2 additional feed rollers The machine is in like-new condition. Location: NRW Availability: by arrangement Warranty: Ijdsx Ektxspfx Aanjtr The machine is sold in the condition it is in at the time of handover. The seller assumes no liability for defects. We reserve the right to prior sale, modifications and repairs. Didn't find what you're looking for? Then contact us!

Condition: good (used), Year of construction: 1997, Slow-speed shredder with moving floor Rotor width: 800 mm Motor: 11 kW Itsdpfx Asx Ed Rujanjr

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GAZ 62 with G-Rotor Factory-refurbished, new wear parts Feed opening: 620 x 820 mm Hopper capacity: 0.65 m³ Ijdox Eb Tmopfx Aanstr Rotor diameter: 248 mm Rotor working width: 600 mm Rotor speed: 80 rpm Cutting system: Spiral rotor; 26 knives, 30 x 30 mm Screen perforation: 10 mm or as required Control cabinet: completely wired, incl. 5 m cable Motor power: 18.5 kW Hydraulic motor: 0.75 kW Connected load: 400 V +/- 5% / 50 Hz Extraction port diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shutdown in idle mode - Vibration-damping machine feet

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, Disc chipper with 2 knives. Tractor PTO driven. Itodpfx Aasx Dzdisner

Condition: good (used), On offer: Itedpfx Aox Dx Apeansr A wood shredder by Weima Brand: Weima Model: -- Machine type: Wood shredder / chipper Feed hopper: Large industrial hopper for wood waste Shredding system: Rotor with knife assembly (typical Weima design) Material: Solid wood, panel offcuts, trimmings, scrap Construction: Heavy-duty, welded industrial steel frame Hydraulics: Available (push system for material feed and maintenance) Drive: Electric drive (data available upon nameplate information) Discharge: Wood chips / shredded wood waste 2 screen baskets, one in as-new condition Includes several additional new blades

Condition: excellent (used), Year of construction: 2006, Shredder in refurbished condition Slow-speed with walking floor Rotor width: 800 mm Large rotor diameter of 368 mm with 40 blades Motor: 22 kW The following parts have been renewed: Itodpfxjx Dqz Ro Aanor Rotor bearings Gearbox bearings Gearbox oil Blades have been turned Screen: 20/25 mm V-belt

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Vecoplan drum chipper, robust. VTH 65 / 18 / 3. Infeed width 650 mm. Infeed height 180 mm. Rotor diameter 60 mm, solid steel. 3 feed rollers. 2 chopping blades. Screen size 55 x 55 mm. Counter-blade with interchangeable mount. 2 feed gearboxes, each with 3.0 kW power. Electrical control cabinet with control system. Drive motor 45 kW. Has not been in operation for 18 years. Itjdpfx Aajx Dlk Toner

Condition: excellent (used), Year of construction: 2006, Residual Wood Shredder Manufacturer: Untha Model: LR 630 Year of manufacture: 2006 Operating hours: approx. 5,241 h Power: 18.5 kW Hopper opening: 624 x 792 mm Hydraulic feed Number of knives: 17 Rotor diameter: 248 mm Screen diameter: 20 mm Itodpfx Ajx Dinveaner Dimensions: 1,740 x 1,170 x 1,680 mm Weight: approx. 1,300 kg An additional set of new cutting knives included.

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Itsdsx Dc T Eepfx Aanor

Condition: used, Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Ijdpfx Aex A Unleanetr Rotor knives size: 40x40x23mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, OSKA OKRR 600 ZD chipper with feed hopper and chip conveyor Year of manufacture: 2013 Iedsx A Sc Tepfx Aanstr All machines are in working condition, the chipper is connected, conveyors are dismantled as shown in the photos. Technical data of the chipper: Fraction: fuel chips Main drive power: 22 kW Knife shaft width: 624 mm Number of knives on knife shaft: 40 pcs Feed hopper volume: approx. 0.5 m3 Capacity*: 600 kg/h Hydraulic feed pressure for the chipped material Overload protection mechanism to prevent chipper blockage