TH-WerkzeugMaschinen

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Kjdpfx Abjyv In Iocedi Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Kdsdpfx Absyv A Dkocji Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 Kdsdpfx Absyvyy Ascoi X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Table size: 3,200 x 1,400 mm MACHINE DETAILS Control type: CNC Control system: Heidenhain Kodpfeyvub Usx Abcjdi Operating hours Spindle run time: 23,291 h Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,500 mm, feed rate Y-axis: 50 m/min, table length: 6,000 mm, total width: 3,000 mm, spindle speed (max.): 22,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, spindle nose: hsk 100, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: mm 6.000 Y-axis transversal travel: mm 2.700 Kedpfx Ajyvtt Njbcsdi Z-axis vertical travel: mm 1.500 Maximum feed rate with interpolated axes: m/min 50 WORK TABLE Dimensions: mm 6.000 x 3.000 Height: mm 300 Load capacity: t/m² 15 T-slots for workpiece clamping: mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH MOTOR SPINDLE Automatic universal indexed head with 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercutting. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum axis rotation speed: rpm 30 Maximum torque on A/C axes during operation: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power speed range: rpm from 3.000 to 18.000 Constant torque speed range: rpm from 10 to 3.000 Tool interface: HSK – A63 DIN 69893 HSK – A100 MOTOR SPINDLE WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 12.000 Constant power speed range: rpm from 2.500 to 12.000 Constant torque speed range: rpm from 10 to 2.500 Tool interface: HSK – A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted chain magazine located at the rear of the machine, enclosed for operator protection, with vertical tool change arm and automatic tool preselection. Fixed-position management. Hydraulic axis clamping Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter with adjacent free positions: mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter with adjacent free positions: mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure coolant (water and air) through the spindle • Semi-automatic spindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser tool presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and motor spindle • User and maintenance manual and CE declaration of conformity

Condition: used, Year of construction: 1996, functionality: limited functionality, CNC-Planer-Type Milling M/C - Double Column (Milling and Turning Center) | Brand: DÖRRIES SCHARMANN | Type: 4FZT | Year of construction: 1996 A high-performance gantry milling machine designed for machining large workpieces. Its primary applications include the milling and turning of large, complex workpieces. The machine can be inspected under power by appointment. Condition: Consistent with the year of manufacture; some parts require refurbishment. - A high-quality machine, and therefore well worth modernization / a complete overhaul / highly recommended. TECHNICAL SPECIFICATIONS: Main Dimensions: - Machine width: 13.230 mm - Machine height over the floor: 8.450 mm - Machine length: 31.100 mm - Working length: 11.000 mm - Clearance width: 4.400 mm - Clearance height from the table surface to the spindle nose of the standard milling head: 3.000 mm Table: - Table width: 3.450 mm - Total table length: 13.400 mm - Length of individual table: 6.200 mm - Total clamping area: 3.450 x 11.000 mm - Clamping area of single table: 3.450 x 5.000 mm - Maximum total workpiece weight: 112 tons - Maximum workpiece weight per table: 80 tons Crossbeam: - Travel: 2.000 mm Milling and boring support: Kdedpfx Asyuptzobcoi - Drive power for milling and boring (spindle): 80 kW - Max. speed of the drive shaft (spindle): 2.500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - Control: SINUMERIK 880 - 2 x chip conveyors - Documentation - CE marking No guarantee for completeness and accuracy of technical data and equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 2,50,000 kg, overall weight: 4,00,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 Ksdpfx Aeytrxksbcjdi - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2023, functionality: fully functional, FPT INDUSTRIE GANTRY MILLING MACHINE TECHNICAL SPECIFICATIONS Brand: Fpt Industrie Model: Dinox 350 (IAT) Year: 2023 2-position PickUp Automatic millesimal head (2 segments) Tool changer CNC: Heidenhain PRICE AND FURTHER INFORMATION UPON REQUEST Kdodsytpfnopfx Abcei (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: good (used), Year of construction: 2011, functionality: fully functional, We are selling our Datron M8, year 2011. The machine is powered and ready for immediate use! Includes tools, vacuum clamping plate, pneumatic clamps, and programming software! Kjdpfjyti I Aex Abcjdi 10-position tool magazine (incl. various tools and holders) HSK25 milling spindle, 50,000 rpm Includes Primcam programming software 2x pneumatic clamps Vacuum plate including vacuum pump Horizontal clamping device Cooling with alcohol or air

Condition: good (used), Year of construction: 2021, functionality: fully functional, MillStep CNC Router PA8070V3, Year 2021, as well as PAX8050V2 – Year 2015 – 6 units in total available CNC Gantry Milling Machine MillStep PA8070V3 – fully equipped For sale are three CNC gantry milling machines MillStep PA8070V3 (custom size) in excellent condition. This machine is ideally suited for precise machining of aluminium, plastics, wood, and non-ferrous metals, as well as for prototyping and small batch production. Technical Details: • Travel range: X 800 mm / Y 680 mm / Z approx. 200–240 mm • Work area: 800 × 625 mm • Repeatability: ±0.01 mm • Feed rate: up to 9 m/min • Linear guides: HIWIN profile rails Kdodpfxeyrx Shj Abcoi • Ball screws on all axes Equipment: • HF spindle 2.2 kW (up to 24,000 rpm) with ER25 collets • Hitachi frequency converter WJ200 • 3-axis control with cncGRAF Pro • Vacuum tables 800 × 500 mm and 600 × 500 mm • Vacuum pump 1.5 kW • Minimum quantity lubrication (MQL) • Tool length sensor • Robust steel base frame with chip drawers • Safety enclosure with protective doors The machines are fully functional, well maintained, and can be inspected and tested by appointment. Location: 09474 Crottendorf Price: €5,900 net per unit (PA8070V3, year 2021) and €3,900 net per unit (PAX8050V2, year 2015) – 3 units of each model available – Inspections on site possible (machines are still in operation). Shipping: possible by arrangement

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of manufacture: 2019 Serial number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard drive: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block processing time: 0.5 ms Handwheel: Heidenhain HR510 (remote handwheel) Universal milling head (5-axis machining, continuous movement on 2 axes) Max. spindle speed: 18,000 rpm Swivel range C: ±270° Swivel range A: ±185° Max. rotation speed A/C: 30 rpm Working torque A/C: 450 Nm Clamping torque axes: 1,400 Nm Positioning uncertainty: 8 arcsec / scatter: 4 arcsec (VDI/DGQ 3441) Spindle power (S1/S6): 22/33 kW Spindle torque (S1/S6): 84/128 Nm Continuous operation, constant power: 2,500–18,000 rpm Continuous operation, constant torque: 10–2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool changer (overlapped-wheel system with tool-change arm) Magazine capacity: 80 tools Max. tool diameter: 75 mm Max. tool diameter with adjacent pocket free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm (for 40 tools) Max. tool length: 250 mm (for 40 tools) Tool type: HSK-A63 DIN 69893 Measuring systems Laser tool setter: tool length/radius + tool breakage control (software included) Probe for workpiece measurement/alignment: wireless transmission, probing cycles included in CNC Kdjdpfxjyrndmo Abcoi Monitoring Sensor for vibration/collision detection: response time approx. 1 ms Coolant system external/internal (LEU/LEIUHP) Tank capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External cooling: max. 30 l/min, max. 10 bar Through-spindle coolant (IKZ): max. 30 l/min, max. 70 bar Additional options/functions External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Kdodpfx Aoyrdc Ejbcei Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Kdodpfx Absyrc Akocei Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: used, Year of construction: 1974, x-travel 9700 mm y-travel 3500 mm z-travel 640 mm w-axis 3000 mm Control Siemens type 840D PL spindle diameter 200 mm Spindle capacity 85 Kw surface area 9000x2800 mm Table load 40000 kg column daylight 3400 mm high speed spindle taper ISO 50 weight of the machine ca. 193,8 t dimensions of the machine ca. 22,4x10,2x8,2 m Retrofit 2009 Steep taper ISO 60 DIN 2079 Speed ??12-450 rpm Milling heads: 1x WF 680/450 1x WFU 180/350 1x WFU 70/300 1x 550 mm extension for WFKs The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Kdsdpfxoyq Sxle Abcsi Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1991, x-travel 5300 mm y-travel 2500 mm Kodpfx Ajyq Swhobcodi z-travel 1200 mm Table load 60000 kg column daylight 2700 mm workpiece height max. 1700 mm Table dimensions 5000x2250 mm control Heidenhain type 430 Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2004, x-travel 3000 mm y-travel 3400 mm z-travel 950 mm surface area 2500x1600 mm no. of tables 2 control NUM Tool changer 12 Pos turning speeds 4,5-40.000 U/min spindle taper: HSK 40 spindle drive 6 kW Table load 850 kg Machine No.: 2259 B +/- 110° C 360° Table size: 6000 mm x 2500 mm (hole pattern 22H7 / M16) Spindle: Manufacturer Fischer, 2 pieces (type MFWS 1709/30 Serial number: 10015020 / 133227) Milling head: Forest Line type: fork head / B-axis +/- 110° swivel / C-axis 360° (infinite) rotation / Station for milling head storage (2 pieces) Chip conveyor: Scraper conveyor / Manufacturer: Richter Tool measurement: Blum Feed: X + Y 30,000 m/min / Z 28,000 m/min Rapid traverse: equals feed rate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Kodpfx Aeyqv Eisbcedi About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1994, x-travel 7000 mm y-travel 3500 mm z-travel 1000 mm serial number 14908 control Siemens Sinumerik 880 2 Stück work table 3000x2500 mm spindle power 42 kW turning speeds max. 4000 U/min Tool changer 128-fach tool taper SK50 surface area 6800x2500 mm column daylight 3200 mm table load 20 t Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Kdodpoyqvqljfx Abcji please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1971, x-travel 13000 mm y-travel 2750 mm z-travel 3000 mm turning speeds 600 U/min spindle taper ISO 50 milling head 4 No. 11137 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Kdjdpfx Abjyqvl Ajcsi

Condition: used, Year of construction: 1991, x-travel 6200 mm y-travel 1500 mm z-travel 508 mm Control Mazatrol type M 32 workpiece height 708 mm Tool changer 60 spindle taper ISO 50 table surface area 6200x750 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Kjdpfx Asyqvdrobcedi If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1986, x-travel 5300 mm y-travel 3300 mm z-travel 1300 mm Table load 50000 kg column daylight 2600 mm workpiece height max. 1700 mm Table dimensions 5000x2000 mm control Heidenhain type ITNC530 Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Kdjdpfx Ajyqtm Robcji We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2010, - Model: MECAPRO 3015 Kjdpfx Aeypi Hqsbcodi - Year: 2010 - Table size: 3050x1530 mm - Tool stations: 6 pcs - Spindle: 4 kW - Vacuum: 4 Siemens pumps, 2.2 kW each - Controller: Mecanumeric CN7000ISO

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2412178161400128, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, total length: 3,800 mm, total width: 1,900 mm, total height: 1,790 mm, rotational speed (max.): 40,000 rpm, The following machine is for sale: Pfeiffer Gantry Milling Machine SkyCNC WL2412 Ready to use! Complete package > Set up, connect, start working Condition: used, very good condition, fully functional Original price was: €98,000 The machine can be viewed under power at our premises. Further detailed photos can be provided upon request. Affordable shipping (with suitable forklift on truck) can be arranged. TECHNICAL DATA: Vacuum table working area: 2500 x 1250 mm (medium format) Spindle: HSD 4.5 kW, 40,000 rpm, HSK E25 interface, liquid-cooled Z-axis: 200 mm Minimum quantity lubrication system All axes with ball screw drives Including electronic handwheel control Including automatic tool length measurement (automatic data transfer to the control system) External dimensions / footprint: 3800 x 1900 x 1790 mm Weight: 2150 kg Year of manufacture: 2015 Tool changer: 10-position + 8 manual tool tray slots (programmable for automatic changeover) Power connection: 3-phase 400V/AC, 63A fuse recommended (plug and cable included) High rigidity steel frame on 4 adjustable feet with stable linear guides. Suitable for processing non-ferrous metals, plastics, and wood. Cooling unit with pump (active cool 1500): 230V, 3.8A, max. 900W power consumption, 1500 W cooling capacity Weight: 41 kg, dimensions: L 450 x W 330 x H 600 mm Vacuum pump (Becker Germany) KVT 3.100 3.4 kW, designed for continuous operation, maintenance-free, 100 mbar vacuum, Weight approx. 100 kg Soundproof enclosure with insulation Dimensions: L 1050 x W 700 x H 570 mm Computer with control software: Fanuc ISO programming language, CAD system, machine setup program, extensive manuals on CD Further accessories included: 10x HSK E25 collet chucks, 6x CentroGrip® MR16 Mini HSK collet chucks, CentroGrip® collet set Ø1 – Ø10 (8 pieces), 2x CentroGrip® collet Ø8, 3x CentroGrip® collet Ø6, 2x CentroGrip® collet Ø10, MR16 Mini collets: 1x Ø1, 1x Ø2, 1x Ø2.5, 1x Ø3, 1x Ø4, 1x Ø5, 3x Ø6, 1x Ø7, 1x Ø8, 1x Ø8.5, 1x Ø10, Kjdpeymznzefx Abcedi 2 toolholder wrenches, 1 MR16 wrench, sealing gasket for vacuum table, vacuum felt support pads, 3 acrylic safety screens, 3D dial indicator Terms and Conditions: We guarantee that the machine is currently functional. No further guarantee is provided. Statutory warranty is excluded. Risk passes to the buyer upon loading. Payment must be made 100% in advance before loading. An invoice including VAT will be prepared and sent electronically (PDF) in advance. Any future costs, losses, or warranty claims arising from the customer’s use or non-use of the machine are excluded.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Kdedpfx Absymxi Ascsi Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: good (used), Year of construction: 2022, CNC Heidenhain TNC640, table 2,500 x 4,000 mm, X/Y/Z 4,000/2,500/1,300 mm, 5-axis universal milling head 18,000 rpm, tool holder HSK-A63 DIN 69893, 120 tools, internal coolant supply (IKZ). Kdjdpfx Ajymm Elsbcei

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000 Year of manufacture: 2010 / Commissioned: 2011 Control: Siemens 840 D Travel ranges: X = 10,000 mm, Y = 1,500 mm Enlarged spindle ram stroke: Z = 1,000 mm Enlarged clearance height: 1,000 mm Clearance width: 1,500 mm Main drive: 36 kW, n = 6,000 rpm, 720 Nm 2-speed gearbox, 1:4 Taper: SK 50 Machining capacity in C45: - Solid drilling D=120mm - Tapping M55 - Milling 100 cm³/min Gantry design with traversing portal bridge and stationary clamping table. Clamping table equipped with transverse clamping beams at 750 mm intervals; standard plate sections eliminated. Hydraulic clamping device with clamping bridges for axle machining, including hydraulic unit Angle drilling and milling head, n = 4,000 rpm, SK 50 High accuracy and stability thanks to Hirth coupling Automatic tool change into the angle head Measuring probe RWP20.50-M Pendulum operation Safety fence with light curtains, Sick brand Clamping table with transverse clamping beams at 750 mm spacing Tool chain magazine on portal column with 30 stations Machine cooling unit Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, motorized height adjustment Ksdpeymb Eajfx Abcedi Partition wall with viewing window Chip conveyor with hinged belt design Mounting and alignment elements included